Scissors Restoration [Decay Stopped - Black Scissors]

In restoring these rusty scissors, I used simple techniques and machinery. To restore these old scissors to their "forgotten shine" I had to derust them with a needle scaler, soak them in rust solvent, sandblast them, grind them, powder coat them and make a new screw on the lathe. If you don't have a sandblasting booth and a lathe, there are plenty of other ways to get where you want to go. I especially liked being able to work on the lathe again for this restoration. I bought these old rusty scissors again from a flea market internet site. Please be sure to also note that this video is not just to quickly show someone how something works, but also to relax and escape from the daily grind!
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The scissors were in very poor condition, I suspect the seller (who I bought this item from) found it deep underground. In the first step I removed the rough dirt and rust with the needle scaler. Following that, I put the old scissors in rust remover and sandblasted them. With sandpaper I sanded the inside to make them even again. Now I coated the parts with a black powder coating to protect the scissors from future rust. I painted the sanded surfaces with cold bluing to prevent rust from occurring there as well. Since the old bolt (which held the old scissors together) is no longer there, I made a new bolt on the lathe. These parts I boiled in brandy vinegar, so that they are also protected from external influences.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: Needle scaler, hammer, pliers, propane torch, pin punch, rust remover, sand blasting cabinet, corundum blasting media, file, vise, sandpaper, clamp, tape, knife, Powder coating equipment, compressor, oven, cordless screwdriver, drill, Isopropanol, cold bluing, brush, lathe, lathe chisel, oil, Internal thread tap, external thread tap, hot plate, spirit vinegar, glass jar, tweezers
▬ Special Thanks to my Members! ▬▬▬▬▬▬▬▬
Debora Richards
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!

[@shofisstar]

I am so impressed by the fact that the scissors survived the whole process I felt like they were going to disintegrate at any moment

[@clickbiat]

Same

[@macacodoiphone8724]

@@clickbiat I won't believe you, because it's "click bait" 😆

[@clickbiat]

@@macacodoiphone8724 good one 😂

[@The_Beast_666]

@Sofia Ibarra IKR! I know a woman called Sofia Vergara 🤭😅

[@macacodoiphone8724]

@@clickbiat I'm ready to be a comedian 👌

[@mercedesmarton3768]

Sometimes there are things we should let go. Ashes to ashes. Dust to dust. This one was From rust to rust.

[@ForgottenShineRestoration]

Thank you for the feedback!👍

[@mercedesmarton3768]

@@ForgottenShineRestoration I love your videos!

[@jordanescalante08]

@@mercedesmarton3768 thank you

[@user-kz8fh2bb7g]

@@ForgottenShineRestoration ;-D ヽ(*´з｀*)ﾉ (￣ε(#￣) (￣ε(#￣)

[@karsten0023]

Ich muss Mercedes Marton recht geben. Es gibt Dinge, die im Laufe der Zeit so in Mitleidenschaft gezogen wurden, dass eine Restaurierung nicht mehr lohnt. In so etwas noch Zeit und Material zu investieren, ist sinnlos.

[@calicojacque]

I like that the gloss black paint makes them look like they're made from obsidian. It's nice that you made a feature of their rough, pitted metal than tried to grind it all away into dust, leaving barely any scissor.

[@CartoonCrossovers]

Thank you ❤️ most others say it looks unfinished, I say it has ✨character✨ U-U

[@haileyjohnson6534]

agreed

[@restorerestoration4705]

No annoying intro, no commentary, descriptive details, perfect masterpiece!

[@jorenthar9186]

If those scissors had a soul, being able to be opened after being that rusty must've made it scream with joy.

[@witheeeeeerx]

@@sioalderson2696 yes dude

[@garrygraves3848]

😂!

[@witheeeeeerx]

@@sioalderson2696 It's worth it

[@Tazerboy10]

Yeah, I can see that personification...

[@Nasl-milyarder.]

Yes

[@wparo]

Excellent. Can't wait for part 2 when you finish the restoration

[@gogetaelcrack26]

Si yo también la espero ( LIKE )

[@PANIC0B]

Well, it's supposed to stay that way

[@shiddygaymer]

lol

[@reeceshaw9717]

This was the funniest comment ive seen all year

[@leoribka]

Excellent

[@cloudycakes8485]

"So what do you want on Christmas, my Princess?" -"A SANDBLASTING MACHINE"

[@PuddiNovaXZ]

I know nothing about metal work, never interested me, yet here I am, loving and binge watching these awesome videos!

[@ForgottenShineRestoration]

Thank you very much and welcome! 🐢

[@bloodtopaz8816]

I thought this was going to end up less pitted but I guess there was nothing more you could have done to improve on it. It does work, it cuts paper so I have to conclude that beauty is in the eye of the beholder.

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@meowscles9377]

@Carlose ® 🤍 what⁉️🤨

[@megakarlachofficial]

@@meowscles9377 probably bots, YT just refuse to remove them.

[@superskills5065]

kzbin.info/www/bejne/nGi2cpaHidCEhrM

[@MrFredi_]

@@meowscles9377 😂😂😂😂😂😂

[@im_coffee6611]

I don't know why I find it satisfying when people fix objects or clean them, when I hate doing that.

[@mercury-king]

Personally I like watching old things made like new or functional but with signs of age, even if there is no ‘financial gain’ or if it’s ‘cheaper & easier’ to go get a new item. Sometimes the journey is what’s important, & a lot of people seem to forget that nowadays.

[@ForgottenShineRestoration]

True words! Thanks very much! 🐢

[@kazj1728]

Amazing job. There was more rust in those scissors than scissors.

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@rituraina9139]

@@ForgottenShineRestoration loo Ig.

[@cookinginstyle5198]

kzbin.info/www/bejne/apimaYuCqMeCors

[@santigamer3509]

Ñ😎

[@Jareb_Delgado]

@@santigamer3509 Cuidado no vayas a hacer que se mueran de la risa

[@The_Beast_666]

Umm well seeing the result I conclude that it was beyond restoration and there was nothing you could do otherwise!

[@jorgefernandezacosta8401]

Pésima restauración

[@carlogambino2160]

Me to lol

[@davidw.798]

Any proof that you guys could’ve done better?

[@kippert1987]

@@davidw.798 I think they are saying that given the level of restoration achieved in the video, and that this was done by an exceptionally skilled person, that if they couldn't have been restored further here then they weren't worth restoring and equally that no one else would have been able to restore them further either. So they are implicitly saying they couldn't have done any better hence your question doesn't quite make sense.

[@maisonkeithking]

Could of welded missing sections this wasn't beyond restoration

[@IANNE0402]

Truly amazing. The black colour gives it a way better depth sensation, and also it looks kinda cool with those deformities. Very good job. :) Edit: it's sad to see many people commenting stuff like "Waiting to see the full restoration". There's literally nothing else he can do. The scissor were already in a very bad state, and the results is already excellent.

[@ForgottenShineRestoration]

Thank you very much! 🐢 🤩

[@hannekedeurwaarder]

Yes I thought the same! It somehow looks cute, with a lot of character. Looks like a piece that will be kept in the family couse it's special :)

[@vintage6346]

I have a similar pair. They used to be wonderful. Then, I was in an accident and neighbors, helping me get back into my house in a wheelchair, moved my scissors and many of my belongings to the back yard... inexplicably leaving them uncovered. I still have those rusty scissors. RIP.

[@sodathejunker]

I love that while you made sure they were in perfect working order, you didn’t “over” restore them to look aesthetically new. They still look like they’ve been torn from a page of time, and that gives them some really nice sentimental value to know they’ve been around so long and still work.

[@paulinamorales8854]

Something poetic about something useless for decades suddenly being useful again, through someone else’s hard work and dedication. What’s he get out of this? Just a working pair of scissors.. but those scissors just got a second chance at life.

[@user-eg2sv5gw8x]

ㅈ

[@Austeration]

I thought they might have fallen apart after you gave them that bashing at the start. Very interesting project. I don't think I have ever seen a pair in such bad condition as those. Nice job giving them what life they have left.

[@ForgottenShineRestoration]

Thank you very much for your feedback!🐢

[@jayasmrmore3687]

Right, even though they still don’t look great, doing this must have still been fun and that’s what matters most

[@raoullevan6550]

Vu l'etat de ces scisaux au départ, le résultat est presque miraculeux. Bravo pour votre patience et votre courage.

[@RhiAnime]

Thank you for explaining what you’re doing and why it’s important. I watch a lot of restoration videos and I’ve only just found out what bluing liquid is after watching this

[@tataykarakalpak4525]

На эти ножницы было столько потрачено материалов , инструментов и сил , что проще и дешевле было бы купить новые ! Но , как демонстрация человеческого таланта , усердия и мастерства , очень показательное видео ! Я не думаю , что кто-то будет так же реставрировать старый и ржавый инструмент , но вы показали на что способны ! Вы большой мастер ! Моё вам уважение !

[@ForgottenShineRestoration]

Большое спасибо! 🐢

[@riobrasilia871]

Подскажите пожалуйста где здесь реставрация?

[@user-mi9ez6bb8d]

Как из ржавых ножниц сделать крашеные старые ножницы

[@user-bq3vc6yh1y]

Можно было хотя бы кольца новые отлить...

[@bob5253]

Though I find your restoration attempt admirable I have to say that those poor scissors would have been better off melted into new scissors but that is just my opinion you did do your best on these scissors so again you work is very admirable

[@columbusohio299]

No ur right. I hate when they "restore" stuff like this and act like its restored because then when regular everyday people go to a restorer to get something restored the restorer can act like this an acceptable restoration.

[@md.ddbjhd5906]

wow

[@tomsheets6399]

@@columbusohio299 - You did a better job fitting the word "restored" six times into a single sentence - than the guy did on these scissors

[@columbusohio299]

@@tomsheets6399 did i use any of them in the wrong context or anything? Were u unable to understand my point? You get restore, restored, restorer, and restoration are all different words with different meanings? One is a verb in present tense, one is a verb in past tense, the others are nouns, one describing a person. Its funny how describing my complaint about this i would need 4 different versions of a word to convey my meaning. Sure i could of used other words if i was a writer writing a book but for a comment on the internet its best not to assume that everyone reading it is going to understand the synonyms for a restoration topic. I mean my first use of restore was in quotations meaning that i was implying the use of the word restore wasnt the correct use by the channel in the first place.

[@prabean69]

@@columbusohio299 dawg why you arguing about english 💀

[@jjjcmo]

Sometimes you do things that really don’t make much sense, because you’re curious to see how it turns out. The fact that they work at all is something of a minor miracle.

[@SH-wl8ox]

I love your videos. I spent a significant part of my life serving in the US Navy. That "needle scaler" - we used them regularly in the Navy. We called it a "needle gun". Thanks for another fascinating restoration video. I really admire your skill and attention to detail. Bravo Zulu!

[@ForgottenShineRestoration]

Thank you very much! Yes in Germany it is also called "needle gun" literally translated, but the official English name for it is probably "needle scaler"?! 🤷😅🐢

[@user-bj5vh8pd8h]

Столько труда и средств в ножницы вложить. Я работаю часто ножницами и понимаю, что этим ножницам поможет только зелёная краска. Покрасить и выбросить в траву, чтобы никто не нашёл больше.

[@gilladams1521]

You could have encased the handles and outside of the blades in epoxy to give a smoother and more comfortable surface to handle.

[@chuchu9649]

I agree. At the minute it still looks unpleasant.

[@nikandjofl]

Great job 😄 I actually like the no talking with random sounds. Creepy but in a funny way. The first time watching one of these videos, I had to make sure my sound was working. Glad we got to see them cut!

[@nitrogenFox]

I'm so, so happy that you left it rather pitted and worn down and just repaired it enough to be functional and still beautiful, in my own opinion. I'm tired of all the channels that breaks things down and build them back up artificially until you cant ever tell that it was ever flawed or restored in the first place. I know many people like that kind of thing, but I find it gorgeous when you can see the life something has gone through, the damage and wear and decay it has suffered, but you get to see how someone has loved it enough to bring it back from the brink of destruction while still letting it be its own unique item. I find the finished result perfect in it's own imperfect way.

[@ForgottenShineRestoration]

Thank you for your wonderful comment! I'm so glad you liked it so much! 🐢

[@radhanathmandal5420]

I got shocked before I saw your restoration technick RESPECT😎😎😎

[@kitterzy]

Since I love collecting scissors and use very old scissors as I work with a lot of different types of mediums. Those scissors are “bookbinding” shears and that’s why they’re riveted and not screwed, and have the one blade flat. They cut heavy materials. I would have been surprised if you were able to restore them to working condition (able to cut leather and bookbinding board). As is, they’re a nice decorative piece! So much better than rusting and disintegrating, lost to time.

[@jackiecarobecca]

This made me emotional. I’m so happy they were able to cut paper again, after all this time. It made me very emotional in a weird sort of way. It was beautiful. Thank you you pure soul.

[@user-dj9sv4ls1g]

Напрасный труд! Но мастер замечательный!!!

[@user-no6bi7pq5d]

Видео же по результатам в конце,что не режут

[@mlwy45]

I understand why you left them pitted, still did a good job bringing them back to functioning. They look like scissors from some sort of Netherworld.

[@ForgottenShineRestoration]

Thank you!🐢

[@ninasoliscano1542]

Es que nadie habla español????😥

[@user-hc3cq6rb5q]

Да...лажа.Осталось эти ножницы закинуть туда,откуда их отковыряли.Самый лучший вариант.

[@user-dc8ul9jy8r]

Точно🤣 медицина тут бессильна.

[@user-kw5xj4fo9v]

выкрасить и выбросить. ну он и выкрасил. видимо и выбросил. только не показал

[@Dimonss777]

Главно функцию свою главную выполняют.

[@ukenceto]

love it how he cuts the bolt ultra precise and then the paper heart;s the most uneven and jagged cut imaginable

[@froggo1088]

Give this man an award! That thing had been in its grave and you brought it back!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@ArmandoDy]

Maybe you should've welded some fresh metal to the handles and scissors before powder coating them. You might've gotten fuller results. Great video. 😉👍

[@No_LIMITS_Dias]

Ожидал, что они станут, как новые, а тут просто почистили и покрасили

[@vorchun80]

Хрень какая-то. Тоже ждал вау.

[@janustwofaced]

Аналогично. Другие видео круче были.

[@user-ib5pe8nk7e]

Не интересно.

[@meowscles9377]

Согласен, другие его реставрации были намного лучше. Я не нахожу этот более интересным или лучше, чем другие.

[@bloodytusk9897]

Один дурак показывает другим дуракам, которые восторженно, роняя кал, бегут ставить лайки. Это что за ножницы такие, из "пластилина", которые можно заточить напильником? Если не верите, попробуйте на досуге. Ох уже эти мамкины - ютуб - реставраторы!)

[@CrustyRestorations]

Considering the before, well saved that man👍👍

[@thepebble8624]

dude you have the most perfect videos no intro no speaking you're straight to the point and really nice and satisfying tool👌

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@Overrated7901]

Those scissors took time and effort to become it best version of itself. With enough time and effort you can do the same. Edit: I didn't watch the full video. This didn't age well

[@Chriskyrob]

so true, actually blue balled

[@superskills5065]

kzbin.info/www/bejne/nGi2cpaHidCEhrM

[@lugwrench9832]

I have scissors just like those (but no rust) that I bought at a yard sale for $1. Based on the maker's ID, I dated the scissors to circa 1850, Sheffield, England. The only problem with this particular pair was the original fulcrum bolt was gone, and somebody had replaced it with a short machine screw and a wingnut a long time ago.

[@Sarah-uh4ut]

Best restoration youtuber out there

[@mayflower9705]

I love watching these. It's amazing how you can take something that looks completely unsalvagable and make it work again.

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@alancoronado4622]

Lo que más admiro de tus vídeos aparte de la restauración, es tu gran paciencia y dedicación a cada detalle 👍💪

[@beluccakidsblk2945]

incrível transformação de uma tesoura velha enferrujada em uma tesoura velha preta

[@sowotokizabeli1650]

Sandblasting is always my favourite part

[@payteeohehn9229]

I have never in my life heard of a needle scaler. You learn something new every day :) Awesome work!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@robinskyemckenzie5448]

I disagree with the top comments. I love this restoration and the scissors look awesome. I would pay to have something that cool looking

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@GigaDarkness]

sounds like you aren't very good with money, then lmao

[@AIIIiNa]

@@GigaDarkness You yourself wouldn't be able to do even half the job he did, so you'd better not talk, smart guy. 😐

[@jmwbt1609]

Oh now that rust removing thingy at the beginning was A1!

[@user-wg2bi9hu1j]

Мало того , что у вас золотые руки , так ещё вы умный человек ! Это ж сколько информации нужно знать , чтобы делать всё с нужным последованием процесса ! Смотреть , мне как женщине , завораживает ! Спасибо вам за то , что вы есть ! Удачи вам !

[@ForgottenShineRestoration]

Большое спасибо! 🐢

[@yarahassan4084]

I like that you added a descriptive details, so informative. Yet, it doesn't worth the effort or resources. Great work though.

[@zerahcolaso7292]

This was quite satisfying to watch. Really amazing job guys !! I really love the antique look it has

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@yroslav27rus68]

ahahah ahahah laughing from translation/хахахахаха смеюсь с перевода

[@johnjones3967]

A couple more years and Mother Nature would’ve had these scissors back home.

[@darinwilson2639]

Don't mean to sound disappointed, you do fantastic work, however I was kinda disappointed that you couldn't smooth out the scissors.

[@edchayphone7545]

It's a great invention, you do it best, it's great for showing me your ideas.

[@maisonkeithking]

For missing sections I'd recommend welding the areas and then doing the linishing etc it's obviously restorable

[@storm_filter]

yeah throw some weld on it, it's just a pair of scissors

[@maisonkeithking]

@@storm_filter yeah weld will help anything even if most of time money wise ain't worth it u can restore anything so it don't matter if it's just scissors the point is if u remaking a restoration video follow it through all the way like my mechanics KZbin restoration xD

[@Dan65]

The fact he actually spends hours to days for our entertainment is crazy

[@juliemarkham4332]

For some reason I thought they would be smooth. In retrospect, the metal looks hammered. Great job!

[@ditherdather]

I love that you kept them pitted from the rust. They look super cool! Nice work!

[@ForgottenShineRestoration]

Thank you very much! 🐢

[@jannadomkratovna5759]

Оставь бедный труп в покое. Некромант. 😀

[@Fallenemiko]

Looking at the comments, I thought they where gunna end up WAY more pitted and decayed. You made them function, which is impressive all on its own, wasnt nearly as bad as some are making it out to be.

[@JLCra87]

Nice job! I was expecting you to maybe weld some material on and do a more clean resto. But I think you did a great job at preserving a piece of history and keeping it from further decay. Turned out very nice for that purpose!!

[@ForgottenShineRestoration]

Thank you very much for great Feedback!🤗🐢

[@HandsonRestoring]

Man that thing was basically rust in the shape of a scissor 😍 You´ve got to love rust so much to touch that 😍 Great work 👍👍

[@ForgottenShineRestoration]

Thank you very much! 😁🐢

[@eduardomansur8683]

Applause for all the work and attempts... but in my opinion, a lot of work for little reward... but it was worth it!!

[@superredlunatic9250]

My Oc, Tirzah, thanks you for fixing her lost scissors🖤

[@paulorth2251]

Interesting piece of work, but finished appears more like "ended". I thought you would have cleaned them up better. Obviously these were frightful to begin with, but I had hoped you would ean them up better. Thanks for sharing and sorry for the negativity in my comments because I do enjoy your videos. 🇨🇱🇺🇸🤔🥂

[@ForgottenShineRestoration]

Thank you very much for your feedback!🐢

[@BarredCoast0]

I am amazed at how much manual labor you put into this restoration. Using a rasp file, I always thought that would be for the finishing touch, otherwise an angle grinder would be used. Your patience is commendable sir. Kudos!

[@ForgottenShineRestoration]

Thanks very much! 🐢

[@daemondoodles]

The fact that they actually worked again is amazing- that's definitely restoration enough for me. I don't know what everyone else here is on about haha

[@ForgottenShineRestoration]

Thank you so much! 🐢

[@zelou4970]

I had my volume up and was watching this to sleep 😭😭 the first part

[@janniklau8517]

How. Just how. He literally is the guy that proceeds to make my life a whole lot better. He turns things that are already good even better. He makes the videos VERY satisfying. He LITERALLY MAKES SOMETHING THAT LOOKS LIKE IT CAME FROM A DUMPSTER AND MADE IT LOOK LIKE IT'S WORTH A THOUSAND BUCKS. And theres just so much more to list out. Keep it up my guy!

[@ForgottenShineRestoration]

Thank you very much! 🐢🤩🤩

[@user-kz8fh2bb7g]

ستلتث

[@user-kz8fh2bb7g]

@@ForgottenShineRestoration ذذ

[@zhourerrajy8727]

0

[@jaimegomezgarcia7599]

Fantastic work. It is impressive to see how the scissors were at the beginning, and how well they have turned out. Congratulations!

[@Mrcaremal5]

Theres nothing impressive about them, somehow he managed to make them look worse than before!

[@jaimegomezgarcia7599]

@@Mrcaremal5 I disagree. But I respect your opinion....

[@allisonorallie]

@@Mrcaremal5 ok the scissors at the beginning looks *HORRIBLE* even if they didn’t do *GREAT* there’s no possible way it looks worse than before, they actually did pretty good ngl, I don’t respect ur opinion bc u just want attention and I know it.

[@lisastenzel5713]

Turtle and me!!!! 😅😅😂😍 Turtle wasn't sure about the vinegar

[@marlonmoran5044]

Lo vi completo, no es lo que yo esperaba, creo que se pudo haber trabajado mucho más en ellas. En fin, el punto del video es que ver el proceso sea satisfactorio, y lo es.

[@moludrm7579]

من هم همین نظر را دارم

[@stellarnova8644]

As impressed as I am that they even opened, let alone survive the rest of the restoration process, I feel like the only way to get them to a point that everyone would be happy with them is if you built up the metal to the point where there would be more new metal rather than the original metal. So that would kind of defeat the purpose. On a project as small scale as this, it was probably best just to melt the scissors down.

[@reginaromsey]

This had to be done for the love of doing! Congratulations, you are amazing!

[@Totally_Random0]

Yo, so today, we're doing some ASMR by repairing these rusted scissors found like 500m deep underwater in a shipwreck Great vid btw

[@ForgottenShineRestoration]

Thank you! 🐢

[@miro_torjus]

Did you just use the precise hour equivalent of a day? Wow, that’s impressive.

[@YourProcess]

Great process video Nice working Magical change! 멋진과정입니다

[@lashaesmith1497]

I found my newest obsession. This video actually was strangely comforting and about lulled me to sleep 😭 glad I was able to watch to the end though, very satisfying.

[@harveywhitehead-coyle2607]

Glad to see that there was something left after the blasting🥳

[@mohamedmenessy6028]

That sand blasting part was interesting 🤩👌👏👍👍👏👌🤩🤩👌👏👍👍👏👌🤩

[@Astrok1232]

это не стоит таких энергозатрат.

[@akoznasovajusername]

Too damaged. Very thin at some places. Although, it could be fixed by grinding, welding and sanding. But that would take too much time, and money of course.

[@PGill-rv8wi]

I love when only the necessary parts are filed down, I appreciate when the pitting is left alone

[@yuriboechat]

As pessoas não entendem que existem estilos de restauração, cada um faz da maneira que acha mais interessante. Obviamente você tem capacidade de deixá-la como nova novamente, mas preferiu deixá-la com o aspecto de envelhecida, um verdadeira obra-prima. Gostei do trabalho e sucesso do Brasil!

[@ForgottenShineRestoration]

MUITO OBRIGADO! 🐢

[@TheRestorer]

Who knows how he does it?😮That's amazing, isn't it?👍

[@nathans1978]

My favorite part was when I saw the Knipex wrenches. Another great video! You did not have to spend time on reviving these scissors, but you did it anyway and I like that. You did a great job.

[@ForgottenShineRestoration]

Thanks very much! 🐢

[@nathans1978]

@@ForgottenShineRestoration actually my favorite part was the whole video. :-)

[@mythicalrats7345]

10 minutes in and i realized you are not Tysy tube lol... but still very good video!! ❤️

[@ahmedilyasdar]

Just cleaned. Sharpened and painted this was not what I expected from you.

[@whodoneit218]

They may never cut paper again, but you certainly honed your skills on it! Nice job!

[@Lionslawnservices]

I LOVE WATCHING THIS GUY

[@quietcarselijah]

15:33 that is paper

[@ForgottenShineRestoration]

Thank you 🐢

[@ForgottenShineRestoration]

🤗🐢

[@beatrizcordeiro7437]

Muito trabalho pra uma tesoura enferrujada!

[@robsonzornitta8721]

Juro que pensei que ele ia soldar as partes desgastada e depois raspar e polir como em qualquer outro canal, mas, terminei o vídeo com aquele sentimento de: "mas que merda é essa que esse kr quis fazer?". Bem... Fazer o quê né!

[@CaptainFALKEN]

Sandblasts scissors.... This is something I found that I wasn't looking for that I would do for fun. 👍

[@laurencekerr956]

Am I the only one who wants to see a super slow motion of the needle scaler at work?

[@ForgottenShineRestoration]

🤔🤔🐢🤩

[@GuardianAngel..]

What a huge improvement but what would be Cooler is to take the restoration process one step further and make them to look like new.

[@user-ql9nf4zu2u]

Да занимаематся реставрировать старые ножницы это настоящий талант надо иметь и терпения мне ваши видео нравится мне они даже настроение поднимают.

[@viktorwilms1905]

А зачем тебе это нужно?Ты же не пользуешься старой машиной,или ещё что хуже старой женой?

[@Annasunluna]

Этим ножницами ещё жить и жить!!! Отличная работа ❤

[@ForgottenShineRestoration]

Большое спасибо!🐢

[@Noneofyourfuckingbusiness12]

I'm tired lemme look up some ASMR restoration videos and get ready for bed. BRRRRRTTT

[@chaosinorder9685]

The finished product isn’t perfect, but considering what lengths you had to go to to get it to where it was that’s pretty impressive. Sometimes you just can’t restore it to a completely smooth surface sometimes you just have to make it look as good as you can and make it work again.

[@MariaHelena-wh5wo]

Processo do parafuso, muito lindo ! Belo trabalho !👏👏👏👏💖💖