eXtremeRate PS5 RISE Plus MAX Remap Kit RMB Version for BDM 030 040 050 Installation Guide

[@Michael4Times]

this is so cool. really considering getting this

[@ExtremeRate]

Really!

[@DarthLordRaven]

This is even more easy than bdm 020. Thinking of changing the bdm 050. i'm way faster with the clicky triggers.

[@ExtremeRate]

You need to do the soldering for the optimized switchable clicky trigger function (the adaptive motors will shut off when at clicky)

[@winkiiiie]

Bdm 050 here . Paddles dont turn on and no one is answering me at extremerate

[@AllenStarkwell]

This kit has Clicky bumpers, or jus the Triggers?

[@kikos80federicomartinelli58]

Spettacolo … ora devo acquistare un pad nuovo pero … ho solo 010 e 020

[@ExtremeRate]

🙂

[@KB-du3rh]

Do the clicky triggers work with or have any interference with adaptive triggers? I assume adaptive triggers work fine when the clicky triggers are disabled, right?

[@ExtremeRate]

The clicky triggers do not interfere with the adaptive triggers. They work independently, so when the clicky triggers are disabled, the adaptive triggers function normally without any issues.

[@KB-du3rh]

@@ExtremeRate Thank you for confirming this

[@traylord]

@@ExtremeRate Any way to achieve the same thing (stop adaptive on clicky triggers) on BDM 020?

[@psychomaniak21]

will there be an upgrade kit for previous model the (Rise-4 RMB), cause I already have that and all i need is the custom profiles and the trigger switches

[@ExtremeRate]

All the other parts except the paddle housing are totally different from the old ones. So you can buy the new plastic version and drop us an email to retail(at)extremerate with the screenshot of this reply and we will send you the board of the new RISE4 RMB board (SKU PFGZ163)

[@NotExtraBG]

Is it easy to mess up while trying to set up the accessories and then your controller stops working?

[@joshuajones9947]

Yes, that's why you should take your time. Its not hard to set up but since your dealing with small parts its easy to mess up.

[@Brockthecoc]

Just put this together. All Controller functions still work and trigger stops work. Light on the pack does not light up and paddles have no click to them. Pls respond

[@PandaCheeks]

Hook up the touchpad back to the controllers motherboard. There are 3 ribbons that need to be connected back on the motherboard.

[@KellTv]

@@PandaCheeksthx .. you help me … I was wondering why my pack wasn’t lighting up but I realized I never put the new ribbon in the motherboard 😅

[@VvGUNNERvV]

Which clicky kit is compatible with this. Bdm 040

[@ExtremeRate]

If you need the L1 R1 be clicky, check this kzbin.info/www/bejne/hZDIiJJ8ebSer5Y If you only need the face buttons clicky, check this kzbin.info/www/bejne/nqu3gWqaoauZh8U

[@VvGUNNERvV]

I made it work with the bdm 40 all clicky kit. I still wanted the normal function of R2 L2. So I cut the R2 L2 PCB buttons off, cut the original rubber grommets that lay into the trigger buttons in half and installed.

[@AEAE8877]

​@@VvGUNNERvV I've done the same but L2 and R2 aren't working any more, only if I put the trigger stop slider but otherwise its not getting the input of L2 R2. Maybe you have an idea?

[@VvGUNNERvV]

@@AEAE8877 So you're saying when you switch it to the clicky triggers they no longer work? But they work normal when they are switched off the clicky mode?

[@k0ntroversialgaming]

When will this kit be available on Amazon?

[@VvGUNNERvV]

It is on Amazon, except for me they're like 3 weeks out

[@Lexworth109]

If i want to use the rise 4 plus max rmb on my bdm-050 controller, the clicky kit for the 050 is different than the one in this video. the clicky kit for the bdm -050 does not have the L1 L2 and R1 R2 portions that you modified in the video. I see that the new rise 4 kit takes care of the L2 and R2 buttons. But the L1 and R1 shoulder buttons would not be upgraded. How could i get the mouse click shoulder buttons in this setup?

[@catpersonality66]

They haven't released any clicky kit for the 050, you can wait till it comes out and then add this part.

[@ExtremeRate]

Once we release the clicky triggers or whole clicky kit, you can cut off the L2 R2 of the kit and install with this RISE/RISE4 plus max kit, and then you will have the clicky L1 R1!

[@justanothervote]

Good idea!

[@Lexworth109]

@@ExtremeRate Thanks! The whole kickly kit came and ive been running the suggested setup a couple weeks now. It has been absolutely awesome! Thanks for such awesome products and support! I will continue to reccomend y'alls parts every chance i get

[@Lexworth109]

@@justanothervote Its been working great! They released the clicky kits for the bdm 050. Combining it with the rise4 plus max was a little tricky, but it came out amazing!

[@Oskrrskrr_21]

On the bdm 030 model on Amazon there are four backpaddles and on the 050 in the video there are only two. So do I get four or two backpaddles when i order the bdm 030 kit on amazon.

[@S.F.I.]

It’s ip to your preference if u want more buttons to get remapped i personally use both of them so u can get whatever kit u like as look is it for your controller

[@ExtremeRate]

Please check this www.amazon.com/dp/B0DKTFJDP8/