EZ OIL oil drain hose kit for your small engine.

Check out this simple EZ OIL drain hose kit devise for your small engine.
I am installing this on on a 14 HP VANGUARD Engine but the same type could be used on the KOHLER CH440 as well as HONDA GX 390.
A variation of this could help with cleaner oil changes on most any small engine.

[@rogermcdonald1607]

Nice tip RR. It seems like changing oil is the last process engine manufacturers think about. ✌🇺🇸 Roger

[@TheRustyRooster]

Hey hey Roger, yes Sir. Looking out for the next guy

[@robcole332]

Had to watch again for a refresher

[@TheRustyRooster]

I know ol-buddy like watching a train wreck, hard to look away. LOL....

[@RaleysSmallEngines]

Brother, that right there was AWESOME!! Love it, that can help on any riding mower also !!

[@TheRustyRooster]

Yep. And makes it easier for us ol wrench turners

[@bluegrallis]

A much better set up than the $25 plastic 'kits' that Briggs or others sell.

[@TheRustyRooster]

Appreciate ya watching thanks a bunch

[@Big_Johns]

Nice job Rusty, makes it a whole lot easier and neater. 👍

[@TheRustyRooster]

Yep nn thanks for stopping in

[@Big_Johns]

Anytime bud

[@rickwashek478]

Super idea Rusty. I think I'll do the same to my pump, This winter. 👍👍💪💪

[@TheRustyRooster]

Yes sir . Engine, pump, gearbox

[@henrymurawskibigdogrepair]

Always thinking that’s what I like about you make it easier to drain the oil nice little extra

[@TheRustyRooster]

Thanks Henry if it's easy to change maybe it will get done more often

[@gravelyman]

Very good mod there Rusty. Thanks for the video 🔧👍

[@TheRustyRooster]

Any old time fella. Thanks for watching 👍🏻

[@SEXYTECH1000]

HAPPY BELATED THANKSGIVING RUSTY, GREAT TIP MY BROTHER !

[@TheRustyRooster]

Happy holidays!

[@SEXYTECH1000]

@@TheRustyRooster THANK YOU BUDDY,

[@robcole332]

Smart addition for those engines

[@TheRustyRooster]

Got to do it if you don't have an oil vacuum it's going to get messy

[@eddieespinosa8743]

Good job

[@TheRustyRooster]

Thanks

[@tinkeringtaylor3053]

Good idea Rusty well done 👍

[@TheRustyRooster]

Glad you like it

[@nathangriffin9893]

Another quality video

[@TheRustyRooster]

Thanks I'm working on one just for you

[@HobbyMotorDK]

Looks factory Rooster - thanks for sharing this 👍👍

[@TheRustyRooster]

Thanks, put one on everything that gets built

[@STTC]

Good job Rusty

[@TheRustyRooster]

Thanks Steve 🐓 👍🏻

[@Duey_diditGarage]

Great video

[@TheRustyRooster]

Thanks for the visit

[@GrampiesWorkshop]

How's she goin'? It's been a while since was dropped by. Glad to see your video today and it was good one too. Nice mod to the oil drain. Thanks for sharing. Take care!!

[@TheRustyRooster]

All good Mike Thanks

[@INSIDEHOUSEGARAGE]

I like that a lot!

[@TheRustyRooster]

Thanks for watching 👍🏻

[@RestorationAustralia]

Very cool.👍

[@TheRustyRooster]

Thanks 👍

[@krelllab6366]

Yes, the larger opening will drain the oil faster. What's the big rush? I use the red hose that he did not like. I come back in 10 minutes later, and all the oil is out of the engine. The advantage of the red hose is I don't have to make anything. I can buy it and install it in less than 10 minutes. I'm not criticizing this man's improvement, I just don't see that it's worth the additional effort.

[@TheRustyRooster]

The 12mm fitting on the red hose is very thin walled and seems to snap off easily . Thanks for watching and commenting

[@robertmailhos8159]

Nice oil drain tool for your removal of the engine oil which is the Life blood of the engine

[@TheRustyRooster]

Yes sir it's the life of an engine

[@robertmailhos8159]

@@TheRustyRooster yeah buddy 😎👍

[@waynestefinashen239]

Rooster and family, Jake and i at EP would like to wish you a Merry Christmas and Happy New Year.

[@TheRustyRooster]

Thanks fella I'm just now receiving your comment

[@waynestefinashen239]

@@TheRustyRooster Or you were so busy you never had time to check your comments. We know what ii is like brother, we respond to all the early comments but some expect you to respond to some that are even a year later eh!

[@TheRustyRooster]

I try and catch them all heck. I don't get that many 🤣

[@brewyourown4life]

That's exactly what I was looking for. Replacing the engine on my snow blower and that is going to work perfectly. Where did you get the parts

[@TheRustyRooster]

Local hydraulic shop is where I get these supplies

[@conradb7200]

Very nice video. wouldn't you need to put a little extra oil in the crankcase to make up for the volume in the added hose?

[@TheRustyRooster]

Yes, I'm positive you will have to add a touch more oil.

[@bigwashrides3708]

Hey Rusty I am a new subscriber, I can’t seem to find the qtr 90, push lock and cap. Also what size and type of black hose was that used? Do you have a link for that? I looked online with what you identified each piece as and couldn’t find anything. Thanks for your help. Awesome channel.

[@TheRustyRooster]

I source all the comments from my local hydraulic shop

[@abw121]

Nice video! But how about describing the fittings and hose type? Along with where you purchased them? I live by large city and cannot find any of these fitting?

[@TheRustyRooster]

All items should be available from a good hydraulic shop. 3/8 push-lock hose, with 3/8 push-lock fittings. And the metric adapter depends on what engine you install it on.

[@ronjclm8590]

Good idea! you said that these pieces could be acquired at a hydraulic hose shop. A link to sites and the name of the parts would be helpful. Google tells me that Grainger has the "push on hose fittings" that look like yours but the adapter from the engine to the push on fitting...is it stainless steel ? I put something like the red hose on a standup commercial mower and it broke off and dumped the oil. Fortunately, since I was standing on the mower running it at the time. I noticed it and shut the engine before it could get destroyed.

[@TheRustyRooster]

Thanks, fella. I never found an online supplier for these parts. I use our local fitting source

[@ronjclm8590]

@@TheRustyRooster I appreciate your response fella

[@johnmunyan1701]

Nice job Rusty, I like that mounting skid. Where did you get it from?

[@TheRustyRooster]

Thanks. I have those skids made at my local fab shop

[@johnmunyan1701]

Ok they r nice looking

[@keithfrank1303]

Nice I have a B&S 8 K generator that could use this . If ever there is a swivel type fitting that can put on the engine in chassis .. let us know .

[@TheRustyRooster]

I've looked around no go as of yet as to a trustworthy swivel

[@ICEMan605]

Hi Rusty and thanks for putting together this video. I have a Kohler CH440 on my stump grinder. In my searches, I'm seeing some folks calling out a 12mm thread and others thinking that it was changed to a 3/8" NPT. You mentioned the 12mm. Can you verify the pitch of that? My plan is to be ready with both fittings when I make a mess with my first oil change so I upgrade to your tubing set up minus the angle fitting as I really don't want to unbolt the motor. Thanks. Oh yeah, I forgot to ask where you get the adapter fitting with the o-ring seal?

[@TheRustyRooster]

Hey Hey Iceman, that CH440 Indeed has 12mm x 1.5 pitch threads. I order them from my local hydraulic shop, I have found them on the good ol AMAZON. Male end is 12.5mm x 1.5, x 1/4FPT. You my find that you need to loosen the engine to install.

[@ICEMan605]

@@TheRustyRooster Thanks again.

[@condor5635]

Might have considered a Fumoto oil drain valve with the nipple option. F139/F109 series

[@TheRustyRooster]

Those are great. Thanks for watching and sharing this info....

[@ronaldborgos6952]

Can you put a valve between the hose to control the oil out?

[@TheRustyRooster]

You can add a valve if you like, and they make them just for this use. I don't use them. I have seen them accidentally hit and drain the oil.

[@rickbroerman9267]

What size adapter do you use on the Briggs

[@TheRustyRooster]

Hey Rick, on the 14hp briggs Vanguard 12mx1.5 pitch. On the V-Twin briggs it's 3/8 npt

[@johnbelliveau4704]

where do you get the parts for that conversion? Thank you.

[@TheRustyRooster]

Try your local hydraulic shop

[@billjunking_fool5549]

Hello I just subscribed to your Channel I was trying to figure out why my scissor lift table I picked up in some junk will only go up apparently I need a controller not sure how to wire any suggestions I did a video on it working but can't find any brand names on this thing

[@TheRustyRooster]

Thanks fella I sure appreciate that... I'm not sure about your lift, but mine is electric over hydraulic. Yep, like yours, it came from junkyard with out control. I wired 2 garbage disposal switches together. 1 for up one for down. 1 powers the lift, the 2nd controls the pressure release solenoid.... hope that helps

[@billjunking_fool5549]

@@TheRustyRooster hey thanks for replying back I've actually got mine working it was a 3-phase I converted to single phase and I just want to a 220 plug to raise it and one can switch to lower it works for me for now I'm a put it all in the same circuit at some point have a good night and thanks again

[@jjclarkson3261]

Wish you listed the parts you used. Good video.

[@TheRustyRooster]

Parts will very depending on what engine you are setting up. Once you know the thread pitch of your engines oil drain plug, your local hydraulic shop should be able to help.

[@jjclarkson3261]

@@TheRustyRooster Thanks for the reply. I looked up the drain plug part number for this engine and then the specs (some online folks were kind enough to post what the OEM likes to keep as 'trade secret' Lol). I found a low profile 3/8 in NPT elbow and will make a pipe version. Looks like I'll be able to install the elbow without touching the engine mounts.

[@TheRustyRooster]

That's great news. It should be an easy install

[@MikeMike-is2hl]

Hi Rusty... Can you provide a link for the adapter (12m x 1/4) shown at 1:58 in your video. Thanks

[@TheRustyRooster]

amzn.to/45Avcvv This should work I order from my local hydraulic shop.

[@TheRustyRooster]

That's 3/8 sorry

[@TheRustyRooster]

amzn.to/47SvL5c 12m x 1/4 mpt

[@clivebrown400]

Nice job, rusty. What size drain hole is that bolt?

[@TheRustyRooster]

That engine is 12mm

[@clivebrown400]

@@TheRustyRooster ok thank you.

[@clivebrown400]

Rusty, is this the same size hose drain for the GX690 Pressure Washer?

[@freddyenriquez934]

I think installing a valve would be nice.

[@TheRustyRooster]

Give it a try. I personally don't trust a valve in this application unless it can lock closed

[@dustinjohnson2116]

Where are fittings and hose from

[@TheRustyRooster]

My local hydraulic shop

[@tooge47]

what is the application of that engine ?

[@TheRustyRooster]

Those engines were used to build pressure washers

[@xxx_rude_dogg_xxx9806]

will be a lotta oil sittin in the tube.

[@TheRustyRooster]

Very little... thanks for watching.

[@sherrischneider2794]

Your adapter hole is as small as the other hose you did not want to use. Still will drain slow.

[@TheRustyRooster]

Yep, you are correct, yet it's not going to snap off. Thanks for watching.

[@NewVisionLCS]

Schweeettt Tip Rusty!!!

[@TheRustyRooster]

Yes Sir. I'm here for you ol buddy

[@NewVisionLCS]

@@TheRustyRooster thank you sir!

[@xavierpressurewash4491]

Mr rusty where can I buy this parts

[@TheRustyRooster]

Your local hydraulic shop should be able to help with this if not holler

[@xavierpressurewash4491]

@@TheRustyRooster I call few in my area but no luck they didn’t have it in stock they said

[@TheRustyRooster]

What engine are you working on and what area are you in?

[@xavierpressurewash4491]

It’s a Honda 390 gx

[@xavierpressurewash4491]

Nashville tn

[@RichsMowersNBlowers]

Drain the oil too fast can't charge for the whole hour labor. Good one.

[@TheRustyRooster]

Man oh man your a genius

[@jdacosta443]

Great video, where would I be able to buy the fittings?

[@TheRustyRooster]

I order from my local hydraulic shop I'm sure you can find them on Amazon

[@markmeister2444]

Hey Rusty what's the thread pitch on that 12 mm adapter? These Chinese Briggs are supposed to be 12 mm x 1.25 pitch from what I'm told. The only thing is the only adapters I find is 12 mm x 1.50 thread pitch. I tried some local hyd. shops and they don't have metric, at least that's what they told me.

[@TheRustyRooster]

The vanguard 14hp uses the 12mx1.5. I'm disappointed in your hydraulic shop. amzn.to/44hyzWE

[@markmeister2444]

@@TheRustyRooster I am too Rusty. I only have about 4 hrs. on this machine, and I plan on changing the oil quite a bit during break in, these Chinese Briggs motors don't have a real good rep.!

[@TheRustyRooster]

Link to the fitting you need is in the last reply

[@markmeister2444]

@@TheRustyRooster Thanks for the link Rusty I'll be ordering this one.