EZ ON Rake Kit [EK14-26: 2014 and up, 26 inch wheel] Installation

MC Baggers has been hand-crafting custom motorcycles for over a decade. The EZ-ON Rake kit is a bolt-on system that doesn't require the cutting of the stock frame. Because of the requirement to cut the frame, the typical method of raking a bike can create undesirable characteristics, such as loss of durability, stiffness at the weld, problems with brake alignment between steering head and stock main frame due to improper welding, and potential permanent damage of the stock frame. We have carefully considered all of these factors in the design of our kit, eliminating each of the potential issues. We spent years putting our EZ-ON Rake kit through rigorous and unforgiving tests, the result of which is a kit that provides both the ideal rake angle and proper clearance between the front fender and the lower triple tree, all while maintaining the same safety standards as your stock bike. Who says you can't have it all?
www.mcbaggers.com

[@TheHennessy602]

I feel like if you sneezed , you would’ve explained why. Great job on explaining EVERY step. Makes this average Joe feel like I can do this job.

[@ms1535]

Wow! I had a 34* raked Panhead chopper and I loved how it handled. It wasn’t front or top heavy. I changed it to a 30* bobber. Believe me, a bit of rake does make a bike easier to handle. Just can’t take real tight turns. Just my 2 cents… Awesome kit! Loved the vid.

[@pgroadglide1581]

best installation video , ive been a machinist for 30 yrs manual and cnc, i definitely can see thats an excellent precision unit, ive seen and researched all other one's in the market this unit by far is top notch, keep up the excellent work mc , can't wait to get mine for my 15 RRS 30" +

[@jamesleeyoung9336]

Just ordered my custom 43° rake kit (+9 in the neck and 8 in the trees) for a 26" wheel on my 06 Street Glide! I debated for some time about what kit I wanted to install but after days of non stop researching I went with the MC Bagger kit. This video was very helpful in making my decision! Thank you

[@masonmcfarlin4640]

How much total did it end up costing you even after the 26" wheel

[@jamesleeyoung9336]

@@masonmcfarlin4640 It's been a few years and I'm not exactly sure what I had in the 26" wheel and the rake kit. Maybe $1000 between the two if I remember correctly. I'm still running the same Ultima wheel but I did change over to an HHI weld on kit and sold the Steel Kore on ebay less than a year after installing. Nothing wrong with this kit but it just wasn't for me.

[@Andricity]

One of the nicest kits I have seen

[@calaverarafa8205]

Me a parecido Perfecto aunque en España no nos dejaran Hacerlo Sigue Asi

[@kevinmaniel8648]

That's sweet easy install great video

[@golferchin76]

I was hoping to see the 26" wheel!

[@danaj1118]

great video....can you do a full video for the 2015 road glide? continuation of this video... installing the racked fairing bracket, and re-installation of the fairing... and ignition. It would really be helpful, as I am looking to do this install myself. step-by-step would be very helpful

[@gregoryblair9810]

Nice edit on the top tree backwards. It was changed when you brought the wire cover!!

[@gregoryblair9810]

Oh, it just looks backwards. The whole thing looks backwards when finished!! ??

[@chaunceyiloveyou]

Ok Thanks a lot for getting back to me so fast :) Cheers

[@johnkilik]

Nice video! Beautiful engineering.

[@jakejones2799]

Please do a video for the Rushmore street glides. I'd get this kit in a heartbeat if you guys did a video for the SG. I'm a "do it yourselfer". Love the build quality and engineering.

[@shannonpayne9390]

Where’s the finished product

[@TimothyIpmanchilds]

Does a air ride fitting/bolt just replace the bolt at the top of the fork at the triple tree , if running air ride?

[@kelvinwatts4313]

The tubes are not square going in to the head mount is that how all the tubes line up.

[@user-uc6cc4yj8q]

My motorcycle 2016 Indian Springfield, How much does a 26-inch wheel change? (I'm from Korea)

[@jerrybigrig9475]

As I'm watching this I'm thinking you could use this kit to make a long fork chopper ..21" wheel..2"" extension..probably 6"-8" over ..would ride flat ..??

[@maynard5955]

What's that feel like ( going down the road an turning an such) when the legs don't line up with the neck

[@rjhunter_5318]

Do you guys make a rack kit for metric bikes?

[@thomasrybak6239]

Nice kit! Looks real easy to install. Will this kit make the handlebars a little closer to the rider?

[@mcbaggerssales3034]

Thomas Rybak thanks for your question. Actually the difference in handlebar location is negligible.

[@chaunceyiloveyou]

If I add a dirty air ride kit (front and rear) plus a centre stand to my 2009 HD roadking. Will this affect your kits in anyway?

[@ROCCO422010]

real nice kit

[@user-pr9ev3qc9w]

Is this product compatible with '95 Electra Glide bikes?

[@centrodeeventosaltosdeculi7249]

Estimado Amigo. Necesito saber si tiene un rake kit para mi harley breakout 2015 ?...le quiero colocar 26" front , .por favor estaria muy agradecido por su respuesta......saludos cordiales. Moises Jofre.

[@breakaleg82]

Excellent thorough video. What type of torque wrench are you using? I need a good one.

[@troynixon5213]

So a stock with victory xc how big of a wheel can it support without a rake kit

[@Flowsalvador]

Is It availible this item for BMW r1100s motorbike??? Thanks.

[@porkchopspapi5757]

I understand these are aluminum. How are they holding up ?

[@parker38]

Do you make a kit for older Goldwings? I'm beginning a build on a fully customize GL1200 Aspencade, I would like to rake it .

[@koreakim7551]

no cutting ?? and no wellding ??? real??

[@santosj409]

Is the brake line holder bracket sold separate? I can't find it on the website

[@blkjesus255]

Do you guy's make this kit for older harleys? btw great video!!

[@ms1535]

@@MCBaggers when he means old; 1948-Shovelhead’s 😊

[@newwavepressure6478]

I have an old 97 sport in the shad i was thinkin of chopin up i dont wanna touch my new bike lol do u make them for older models

[@sweetbushstudiochannel4606]

What kind of fairing mount would I need for a 2000 Electra Glide FLHT?

[@rippedhog2482]

can you use the stock 16 RGS fairing on this kit, or do I need a new fairing

[@antone96744]

So if I purchase this kit the only other things I will need to order is wheel and fender?

[@johnokeeffe1097]

Great video. Very informative 👍🏼. Do you have a video on Road Glide fairing removal?

[@bernardesparza5603]

I a 98 electra glide classic how i can get a kid for it

[@raymundomezajr]

What's the speed ratio for a rake kit

[@centrodeeventosaltosdeculi7249]

Hola estimado amigo......quisiera hacer una pregunta ¿ es posible enviar a mi pais chile el kit completo para 30 inch front para mi harley road king año 2013 ?......¿ pagar con paypal?... .agradeceria mucho su pronta respuesta......saludos cordiales Moises

[@robsmith6093]

Love the statements about the how to videos that you dont have 😂😂😂😂

[@sammiebonthecutt]

can i use the kit on a metric bike

[@db13401]

can I use my springer front end with this kit?

[@thunderman21]

What torque wrench is that?

[@rontaylor5244]

Do you have a kit for the 2012 Dyna Glide?

[@danaj1118]

whats up Buddy... we spoke a couple of years back... communicated thru text... can we connect again... i have questions

[@israelcampos996]

Is all that required for a 23 wheel

[@lacymatt9768]

Yes a rake kit is required

[@johnathanhunt9684]

I gotta 95 Road King,every rake kit I checked on was 98 and up. Do they make them for my 95?

[@johnathanhunt9684]

It's in the works, Road Glide in the future. Appreciate it

[@calysagora3615]

Excellent excuse to get a real rake and stretch modification done the proper way. Cut and weld. Likely cheaper too.

[@TheRoadhammer379]

​@@calysagora3615dimwit, this is for RUBs not actual bikers. Rich Urban Bikers who want that rake look and big wheel without cutting up a 30k bike. Use your head doofus

[@liamstandish878]

i hope this fits a 82 FLT

[@liamstandish878]

damn... know of a good chop shop?? lol

[@liamstandish878]

its a project bike that i just got.. i have a 99 fatboy so im all good.. newer bikes dont do it for me.. no soul in them

[@tonycrenshaw6568]

do you have a video for 2016 street glide

[@tonycrenshaw6568]

Ok thank you maybe you will have one soon