If you haven't seen my previous video yet, I've put together a set of key pointers that should help you get to grips with some of the more potentially confusing and difficult parts of the game. Check it out - kzbin.info/www/bejne/al7YeaGVh7h0oK8 ! This video is the result of many comments in the previous video asking for help on the topic - if there are other questions or topics you'd like to see covered, let me know in the comments!
@2639theboss2 жыл бұрын
Maybe im just stupid....but could you talk about ERS at some point? It doesnt seem completely predictable as to when different modes are used and what their results are. Im playing a williams save, so ERS is the least of my problems, but it does seem like a bit of an opaque setting. I understand GENERALLY what a button will do. But how long does harvest take? Does the dtiver have some free will over when he deploy ERS? How much harvest do you acrue over a given lap?
@stephontsmith Жыл бұрын
That 5/5 on FP3 was a golden nugget. Always thought I could revert back to the highest confidence on Q1, but it never worked. Didn't know why until now
@levi68592 жыл бұрын
absolutely hands-down the best video I have seen on this topic period.
@PartyElite2 жыл бұрын
Appreciate it, thank you!
@mahee1931 Жыл бұрын
This video saved my life. Thank you.
@davidraynorsnow2 жыл бұрын
First five races didn't know then used this really improved into top ten from struggling to get a point even on first go and board cheered up do it
@hbanderker2 жыл бұрын
Great video. I had no idea what I needed to do, but this video cleared everything up. Well explained, concise, and to the point. Thanks!!
@brandongass2 жыл бұрын
you should do a video explaining the best way to design/manufacture parts
@braddingsg12 жыл бұрын
there is a bug/glich in designing parts it's on the reddit page put all primeiry stats to max eg the lost to mid/high downforce from adjusting the low down force is more than negated by bumping the mid/high downforce to max
@iulnus2 жыл бұрын
One thing at about 5:50 from what I've gathered at the end of each practice session the 2 most used sets of tyres get returned.
@Gofex13372 жыл бұрын
This is correct, I usually do a red or two in FP1, then yellow in FP2 and as I get most of my acclimatise on FP3 I give them a long stint on hards. Though I adapt between yellows and reds in FP1-2 depending on what I will need for the race.
@Gofex13372 жыл бұрын
This is correct, I usually do a red or two in FP1, then yellow in FP2 and as I get most of my acclimatise on FP3 I give them a long stint on hards. Though I adapt between yellows and reds in FP1-2 depending on what I will need for the race.
@Gauweezy2 жыл бұрын
Series... Series... Series! Get Lance that WDC Party!
@GamerSloth22752 жыл бұрын
I only JUST realised - as you mouse over each set-up option that the bias areas highlight in blue that will be impacted! How did I not notice that before?!
@romeucosta2342 жыл бұрын
realy good explanation my friend, great job 👌
@pratama_jr2 жыл бұрын
Series please 🙏 kinda dope 🔥
@Vedinator42 жыл бұрын
Please do a series!!!
@maximepatterson83452 жыл бұрын
Irl, you adjust different toe on the front and rear wheels, but I assume in this game it refers to the rear wheels. Increasing toe out on the rear wheels increase the car's stability but causes understeer (meaning you'll need to slow down more to go through a corner). Technically it should also affect top speed, but not as much as the wings.
@PartyElite2 жыл бұрын
Aaaaaaaah it's rear wheel toe only omg. I thought it was front wheels, and I was very very confused... Thanks!
@joaogbragaribeiro24402 жыл бұрын
Great tutorial
@Sweatkid342 жыл бұрын
I feel like I need a whole class to play this game correctly lol. I'm enjoying it way more than F1 2022
@eshelly42052 жыл бұрын
May I suggest an idea? Don’t use fresh 100% power train parts for practice. Use older engines, Gearboxes and ERS. Save the fresh parts for the race…
@petepeterson12402 жыл бұрын
plenty of training with those sliders by playing motorsport manager for years - go me ^^
@pett3rson792 жыл бұрын
Great video, thx. For more help check Steam community, you can find a website for setup calculator...or how they say :)
@ddubz84142 жыл бұрын
I thought also if u change parts just before quali then the car knowledge and performance points are already locked in so changing gives u no penalty.
@karnyvekz2 жыл бұрын
@PartyElite Is it wise, under circumstances, to swap engine, ers and gearbox before practise and swap back good stuff back in before qualifying? This way keeping the good parts for the Q and Race. Or is this impacting anything in a bad way?
@eshelly42052 жыл бұрын
Absolutely! Never practice with a 100% power train
@djohnne Жыл бұрын
No, I do the same. IRL it might be tight considering the timeschedule. But in game it's better to use worn parts in all practice sessions.
@alfiedoolan48992 жыл бұрын
I dont get though how you get 90% on the setup i try everything
@Trifler5002 жыл бұрын
How does this directly compare with Motorsport Manager?
@prizrakinsider35202 жыл бұрын
hi, i have a doubt, how do i know which compound is gonna be blocked, im losing a set of soft after every practice
@vincenthouplain3462 жыл бұрын
Well, if it wasn’t a Frontier Dev game, I will recommend it but with Frontier be prepared for massive let down, they don’t give a toss about you! Don’t expect support in the future. Their lies are now legendary!
@Gofex13372 жыл бұрын
I mean, they could do nothing with the game in the future and I'd be happy.
@lihtsaltkristjan73312 жыл бұрын
Bono at Ferrari??😁
@animelife64762 жыл бұрын
U said hard huh huh huh
@josephchalue76712 жыл бұрын
BannerlorD 2
@StreetSoulLover2 жыл бұрын
Just treat the sliders as a mini-game, It's a Frontier Developments staple (Many years of Elite Dangerous) Forget what they actually mean, it's completely irrelevant