F1 RZR Pro R gets a cage and Ford Raptors battle!

[@SXSBlog]

Who’s ready for truck battles on the full size track!?

[@ScotianOff-Road]

I mean… why not!

[@corbenotton]

Why wtf Lincoln logs? Lol, They were amazing as a kid

[@MidwestMechanic]

Fuck yea 🤘

[@jasong712]

Ive jumped my Raptor a lot. I really think on that particular jump, the opposite way would be best.

[@jamesjanzen9806]

Cheap truck challenge? Combined with a cheap quad challenge?

[@dougbutterfield5505]

This is me shamelessly asking for sponsored Raptor suspension parts 😂

[@Tippycrawdad302]

Raptor content #1

[@devineverett7651]

oooorrrrrrrr maybe a Raptor R??? 😁

[@123devinzz1]

send those icons off to get rebuilt. they look pretty tired

[@ponypwr]

Cage is sweet, 2 Raptors 1 course real sweet... 2 Raptors 1 course in the opposite direction jumping the jump would possibly break the trucks, but also the internet!

[@Preciousmiller1]

Morning Everyone 🌅🌻☺️

[@covewater]

I love that eighties music for the time lapse And how it looks like it's recorded on a VCR tape!!

[@timmchugh11]

This brings me back to the days of near hour long videos of Doug custom making cages on Project 168 with loads of timelapses, bring back those videos!!

[@jimsimpson4385]

You're absolutely right? They've gone to the? Dogs for me. That's for sure no content or if anything anymore.

[@kyleosbun]

Those houser guys are from my town. Buddy has a houser cage on his rs1.

[@P-J-W-777]

Wow some of the music played while they were putting the cage together took me back to the 80’s. It was great for a few minutes. On another note that gen2 sounds like crap compared to the 6.2.

[@MericanEagle]

Well, sealed the deal and ordered a Houser X3 cage this afternoon…

[@bethmccleary5475]

That's awesome man! Let us know how it goes together!

[@MericanEagle]

Got it together and welded up yesterday. Went well, the rivtab was awesome. Expected some tweaking but everything was almost perfect. Had the same issue as Leo with the top crossbraces. They’re in my scrap pile as the tube is directly above the seat.

[@robertpettersson7402]

Nice cage 👌💯✔️

[@HRSales-dq9bq]

Thank you! If you don't see your model listed on our website, give us a call.

[@StefanMailey]

Every time you went to fit a section. The video would get clipped and edited. lol. Im guessing there was a few bangs with a sledge, here and there.. to make her "slide" into place. ;). Cage looks sick!

[@mudduck621]

houser is 20 min from my house lol

[@bobtherocker4598]

This must be throwback Tuesday. Only 4 min in and already had Lincoln Logs and 80's montage music. Im an 89 model myself and you guys all seem to be about the same, so it's nostalgic for us and educational for the younger generation. ✊👍🤘

[@RocksNRuts4]

sweet cage, wrx was a surprise n it went! raptor jumping was tight, gen 1 was better leo....i need a channel, too much fun! lincoln logs rule!

[@mattalbotM.TOutdoors]

Nice cage Leo, you guys gonna head to Drummond island this year? Always look forward to that ride

[@SXSBlog]

No plans, only so many times you can hit those trails before it’s time to move on lol

[@redneckreggie1867]

That bumper held on for its life

[@sxstexanphotography4587]

Now that's what I call entertainment!

[@KnownSender1]

110 10/10 for sure

[@dustinwamsley8980]

The retro time laps and music is lit asf!!

[@birdatkinson1]

My favorite year of the WRX, and a wagon! Matt is my new favorite 😊

[@Rusty.1776]

That bed organizer is awesome! It would be neat if there was a link for it..😉

[@SXSBlog]

Was waiting on the company, got one now 👍🏻

[@DmonkeyProductions]

Those front shocks are bottoming out hard, they almost look like they aren’t dampening at all, super bouncy.

[@DesertDave1503]

I was waiting for the airbag deployment. Great video as always,

[@TheBroncoKid79]

the rocking in the cage is a bff moment if ive ever seen one

[@atyourservice666]

Let’s see more raptor action!

[@sparky7643]

Doug, you need a supercharger for that Raptor, game changer love mine

[@the_white6.7]

I hafta say houser racing usually kills it. I run their suspension so hard and it works good.

[@HRSales-dq9bq]

Thanks for the compliment! Our new line of SXS products have the same quality and level of engineering that our suspension products are known for.

[@DeweyWRX]

Bugeye for life! I knew I loved Matt for a reason!!!

[@swordtraining]

It's awesome seeing those two coming out of the closet by showing off their Ford's. Rainbow wrap next?🤣🤣

[@fishyz1500]

Yall have to get some lap times in the trucks and suburu..thats frickin awesome

[@wesleytruax2469]

That cage is awesome. Looks like they only sell them for brand new machines right now though.

[@HRSales-dq9bq]

Feel free to contact us to see if your model is available. We did focus on the latest machines but will continue to build the product line to offer more models. For instance, we do have cages that fit the RZR XP1000 chassis back to 2014, two and four seat models.

[@scho45]

All Matt needs is some good dirt tires and rally suspension and he will be flying around that course!

[@636STUNA]

Those front shocks on the Gen1 need some help

[@barb4527]

Dang Matt I sure wish I lived in America instead of Canada cause I’d be all over you 🥰

[@jacob1423]

wildin

[@Travcity1]

Best video in a while. Enjoy the normal guy’s projects.

[@xculichitownx6666]

Yo guys, just wanted to say love you guys shenanigans 😂

[@theguy7488]

I see a Budget rally car competition in the near future

[@ericweyen5146]

Sasquatch in the back: 2 Helmets! 🤣 That made me laugh way too hard!

[@magee887]

if Matt puts good quality 5w40 and changes it often that subaru will go forever as long as it’s got a good timing belt and tensioner

[@MrToppox]

😈😈😈 the rocking horse 😈😈😈

[@aaronproctor4745]

Prefab’d cages have been around forever in the Jeep world, I’m surprised it’s not the same with sxs’s

[@Adriansitos623]

About time to spray some diesel down on that track! Or get some Calcium Chloride or mag chloride for some Dust Control. You can flock the track too!

[@ryanbradshaw2895]

Matt and the wrx! Woooo. Bad ass!

[@bigjoe3639]

The front shocks on Doug's truck have seen many better days lol time for a rebuild or upgrade

[@lyonking912]

Please do some truck content! Make some cheap “baja” trucks then maybe eventually upgrade the raptors and bring them back to battle 👀🤙🏼

[@joshshelton796]

Awesome video guys!

[@MullinPerformance]

Build an RC car track out there and use that cage as a over/under ramp.

[@dk4982]

who owns the vmax -4

[@patrickmaes3810]

Love you guys Keep it up !!!

[@Mattie4124]

I’m down… I’ve worked on Nicks raptor quite a bit at Wilson and I want to get in on any full truck racing.

[@jeffbrooks6166]

Matt “What happened” lmao 😂 thanks men👍

[@johnv8963]

Is Steve and Doug brothers? I've always wondered that.

[@SXSBlog]

Not even related

[@jacobclingaman8601]

So... it's like fucking ikea.. for side by sides..

[@bethmccleary5475]

Yes!!

[@anthonyestevez118]

Matt has a Subaru?! He just went up a notch on my belt!

[@m.k.1340]

Now that the WRX is properly broken in... upgrade time. Forester suspension lift, long-travel Bilsteins, WRX STI hubs and brakes, and forged Method rally wheels and dirt tires. Show the Raptors what a much lighter rally car can do. Amazing how close to that sort of thing new sport SxS unit really are, though. Now that Polaris is doing the Xpedition ADV Northstar, it has roll up windows with a full cab, a folding rear seat, heating, AC, sound system, it is pretty much an automobile... and costs as much as a new WRX Limited, too.

[@Webbys_World]

Raptor battle!!

[@stu9stu9stu]

Gawsh, I thought a VW beetle hood made a dangerous sled but yours is gonna warrant protective clothing 😂😂😂

[@woofersd2383]

They need to build those boxes for SxSs. Crap always flying out.

[@TheBroncoKid79]

you know what would be cool to see cheap rally car challange and maybe end it with the gambler 500

[@stansspeedshop]

Just awesome glad your keeping it og

[@OneExhaustedFather]

Wait... is that really THE Raptor?

[@tedlambert1988]

Should have cleaned the mill scale off for better penetration in the welding and no contamination of the weld

[@tedlambert1988]

You do that before fit up to get under the joints of the pipe

[@tedlambert1988]

And i would have used that squarewave 250 to tac it up tig is where it's at

[@brentbeiler7051]

Really good content today great job everyone!

[@bryancamden6766]

Man I would love that Subaru one of my dream cars to fix up

[@sparky21287]

what are you doing about a roof for the pro r?

[@mattsmit8784]

Still waiting on that reverse wheelie !

[@Granferch]

yes

[@HankAaronJoseph19]

See You On The I ain't worried about it

[@BerryMcCaulkiner859]

Think I would of cleaned the tubing before welding it?!?

[@theglitch99]

👍🏼can I stick weld the cage w/my 300$ harbor freight welder?? 😂

[@bayoubanditcharters]

Need one for a Talon 1000x 2 seater!

[@horsetrainer1052]

In all seriousness how’s the 125 little Papio

[@CraaaigV302]

Is it confirmed dougs raptor is the one in that video ?

[@anthonysprouse7793]

What’s going on with mud lyfe in the background

[@BudgetGroundPounder]

I think you should make another vehicle with all D4S products in it. Like batteries & super caps. Because I'm hearing to many people saying that. There's a reason JP doesn't use his own products. Just to prove them wrong. I'm sure it wouldn't have to be as extreme as the Neo Hoe. Or if you would like to use my 08 focus as I already have a bunch of your products in it. I'm on the east coast, well Buffalo N.Y.

[@jimsimpson4385]

Could I see that part again to old man? Sitting in the cage rocking it back and forth in their sandbox. Is gone to the dogs. Is for me anyway.

[@ryanburke9655]

How much for that oem cage

[@boris2873]

Glad to see it wasn't the Rianbow Raptor!

[@MabutiKazoku]

I wish they made that DIY kit for a 2017 XP4.

[@jessethompson2828]

Cagewrx make a nice kit

[@HRSales-dq9bq]

We do, give us a call.

[@MabutiKazoku]

@@HRSales-dq9bq will for sure once I get my machine back from the shop, depending on the bill nightmare from that 🤮

[@michaeltn8]

That tub thing would be full of ball joints, axles, a belts clothing is not a part of our packing process😂😂😂

[@drew.w.w162]

Dude rally the subiii new tires suspension

[@MyDogsRipit]

Doin the ruff upside down

[@CDJCBMWOGJRIOGUFHDFLM]

Hey what’s up bros how y’all doing much love

[@matthewcarapia]

We need more truck vids🤙🏽

[@joshuagooden4212]

You can see how much better the 1st gen raptor is over the second gen

[@backfireproductions4362]

Oh man I think I’d love to see everyone out there in a Subaru or doing a cheap truck challenge😂

[@Alexwinter123]

MATT IN THE WRX!!??

[@eric_xmrmy3292]

YOU GOT LIKE 3 INCHES OF AIR THAT TIME

[@metatechhd]

💸😂 Here goes my shameless request for sponsored Raptor suspension parts! Watching this video, I can't help but imagine the incredible performance and durability upgrades those parts could bring to the RZR Pro R and Ford Raptors. It's always exciting to see these vehicles in action, pushing their limits. Who knows, maybe one day our dreams of upgraded suspension will come true!

[@Speedy2222]

Headgaskets have left the chat @18:40

[@liamfoley4452]

Kinda curious why brick city is no longer a friend of the channel. Not a huge deal but hopefully it was just a mutual understanding

[@yankumreed6121]

They closed man

[@liamfoley4452]

@@yankumreed6121 oh damn. Well that makes a lot more sense

[@susboi6698]

We want hell force back

[@rytime700]

I don't think there is a lesbian anywhere with a bigger "strap-on" than Leo!

[@TrevDoggTV]

I used to put sidexside cages on them. Also the reason I won't buy a sidexside. Absolute junk

[@DR.P3RKY]

Cheap rally car challenge 🔥🔥

[@SuperGoooooooof]

WOW, so it's all commercials now?

[@sneezinhatch]

If he had the newer baja raptor no need for suspension

[@____MC____]

1500$ tuff truck competition

[@Ultra77737]

Where’s the hellcat