F150 5.4 3V Water Pump DIY 2004 2008

[@growlith6969]

Nice edit, makes a world of difference when the lighting is good, the camera isn't all over the place, and the subject is short and sweet. Five and a half minutes was great. We get way to many people falling in love with their own voice and footage and swinging the camera all over the place. So, great job :-)

[@nathan3306]

Short, sweet and to the point

[@ScottWilliams-o6e]

Succinct!! That’s what I like on YT videos!! Great filming coaching and organizing of the steps!!

[@etripp111]

Great video. I've been SLOWLY working on a 05 Expedition timing job as well. I have been going back and forth between you and Brian Ford TechMakuloco. I appreciate you taking a little extra time to mention some 'tips and tricks.'

[@movaughn20]

Contemplating timing on 05 F150. 260k miles who knows what I'll find when get into it. Hows yours holding up. Use Makuloco's parts list?

[@warbear55122]

I can't get any definite answer. I have a 2007 same motor. Is it a 30 Hub or 36. Both say that they'll fit but I know that's not correct. I guess I could just take it off first and measure it but I'd rather just know beforehand

[@ItzLeddie]

I need to see an actual 2008 F 150 FX4.

[@QBIX23]

Direct and easy to watch video. Would you recommend to replace the fan clutch assembly and thermostat? TQ

[@electropentatonic]

This is rad. I wish I was a better mechanic, just never picked it up

[@synthpro]

Very helpful video thanks for sharing! Tackling my friends F150 tomorrow for a weeping water pump. I was unsure what all was going to need to be pulled to access it but doesn't look too bad.

[@dwight2812]

thank you for this video Do you have any idea how long the belt is good for?

[@goneballistic]

great video, thank you!

[@BlackLocustPatriot]

Very good video! Excellent description and easy to understand. Thank you! We are working on removing the water pump in our 2007 Expedition 5.4, and it is apparently seized to the block due to corrosion. Not good.

[@jefferyreese4159]

All of the vids were good I just did a timing rebuild on my 06 f250 with the 5.4l 3v Triton, replaced the oil pump and water pump and got the timing case back on and valve covers lashed down, tomorrow will be all the connections except for the crankshaft sensor so I can get oil pressure before crank up.

[@leonuug]

How long did it all take?

[@dwight2812]

I wish I would have found your video before I started..... took me forever to get the shrouds and fan out.... ended up wrapping a stiff wire around one of the pump bolts to keep it stationary while I smacked the wrench on the big nut. Do you have any idea how many miles the belt is good for? thanks again for this video

[@davidsherrill382]

Excellent

[@VicTor-co5sq]

Good job 👍

[@hooliorayyes4233]

what kinda assembly grease was that that was used

[@anibalhernandez1217]

Why doesn't my water pump want to come out? even though I removed all the bolts, Do you think it's stuck ? To the block? Thank you

[@shanesmith2885]

What if the truck is off and you still have leaking antifreeze

[@38llee]

It's easy as pie!

[@kingdaniel3519]

My problem isn't with the video, but with the description. Anyone reading this be aware, the 2007+ F150s used a larger 36 mm water pump. The 30 mm water pump linked in the description only works on the 04-06 F150s!

[@TestDontguess]

That’s a good point, anyone wishing to buy any parts off amazon should use the built in parts finder that way it will say if that part will work with your year and model

[@johnwalters7415]

It doesn't have a gasket?

[@ianhillman4007]

Great video. Do you know if the same procedure is used on the 2010 f150?

[@curtoloid3826]

Actually the title is wrong, after 07, it’s different. So yes a 2010 is different.

[@ianhillman4007]

Curtoloid thanks for your reply.👍🏻🍻

[@genewilson6262]

I had to use air hammer 🔨 to take my fan off

[@bthompson1767]

Where's is the gasket ?

[@middletennesseepicker6245]

It has a o ring built in with it

[@HollywoodRoseJack]

Where's the beer bro?

[@Tony_ASA]

Channel name change?

[@THEdisgruntledmonk]

Just Minty

[@jimmymolinaro7554]

I got dizzy from all the head and camera shaking. Couldn't watch it.

[@TestDontguess]

Not my problem if you have vertigo issues

[@jimmymolinaro7554]

@@TestDontguess - Seriously? Maybe you should watch your own video a few more times. It's like you were filming on a pogo stick. Vertigo issues no, camera issues, yes. LOL

[@luckyace1000000]

Definitely vertigo issues. That video was tits.

[@Frenojan007rr]

Cant understand a bit, your video cant tell a bit of detailing

[@ericwhitehead7303]

should say :buy bitcoin" on your white board.

[@rheidtech]

Haya doin? Lol. Here 4 some knowledge. Lol. Mfbt🍺

[@TestDontguess]

You doing a water pump repair today ?

[@rheidtech]

@@TestDontguess this week. 4 a buddy.

[@TestDontguess]

Easy job, hardest part will be fan removal

[@rheidtech]

@@TestDontguess thanks man👊