F150 rear turn signal bulb replacement

[@ricotinez]

Thanks! I had a reminder in my phone to replace that bulb. I had done this before but had completely forgotten how to access it. Watched your video and walked outside in my pj’s to do this. Took me about four minutes.

[@adame7951]

Thank you. I used a flat head, put it in by the push pins, and popped it out easily. You made my life easier with this video

[@SSDirk1976]

Thank you so much for taking the time and effort out in making this video. Solved my issue and first project I've ever done for myself on a vehicle. Working like brand new now

[@jimnayzeeum5428]

Giving it a go, same for me, first time

[@jimnayzeeum5428]

Update to that.. super easy.. but now the other bulb went out lmaoo. Not too long after, my passenger mirror got wacked. Thats easy to replace too FYI !

[@mwsc04]

Your tutorial worked perfectly, took about 10 minutes to change (including tracking down a 8mm socket)

[@ultralitigatorable]

Thanks. Your video was short and to the point. Took about five minutes.

[@winna101ify]

Thank you, very helpful demo. I just lost the lower left turn bulb, now I can replace it without a big service cost.

[@MTN_mtn]

Great video! I noticed driving in that a turn signal did the fast-pace meaning a bulb was bad. Wanted to see a video first! Thanks!

[@dleaf1964]

First time f150 bulb change. I think you just saved me a lot of time. Thanks!

[@cubehire3653]

I have a fast directional blinker on my 2019 F-150 just like you did. I thought it maybe a fuse. Tomorrow I will go out and check out the directional signal lights. This gives me a good excuse to visit Harbor Freight and I see that as good thing. Thanks for posting this video.

[@QueenViper101]

This is awesome! And so simple. Thank you so much for the video and step by step walk through (AND the explanations). My dad taught me everything under the hood, but boy if we didn’t forget the lights!

[@rineneff1272]

Thanks. Simple clear instructions and no added music!

[@brandonhanson9412]

Thank God. A big flathead works perfect for pulling out the assembly. Even in dead winter when plastic cracks easily, was able to do it without a scratch. Thanks buddy

[@GoKash66]

Man, thanks for this! Fun fact, i have the same truck with the same turn signal lights issue😅

[@RW-zh7kl]

This is exactly the video I wasn't looking for. I had a lower bulb just burned out so ur video popped up on my googs👍

[@philos212]

Appreciate your video! i replaced this about a year and half ago and it has gone out again now. I think it has something to do with rain and moisture. I am going to replace it again today. Thanks for taking the time to do this video man - it is much appreciated!

[@Attemptedvelocity]

Great video dude. Love Ole smokey moonshine as well

[@michaelyoung1522]

I had a hard time telling the filament was burnt. When it was in my hand . No way you could tell without pulling it. Thanks, good info

[@burrelleful]

Thank you for this! Because of your video I just replaced one of my turn signal bulbs myself. The whole process took less than 5 minutes start to finish and saved me well over $100 in labor at the shop

[@jackhumberger8017]

Thank you so much for the demonstration. Excellent!!!

[@kelburns8507]

Perfect, this is the correct video. Thank you man for the tutorial, I probably would have broke something otherwise lol

[@jackhumberger8017]

Lol. Me too. Like the tool recommendation. I'd of used a screw driver, and scratched, or broke something. Those taillight assembly, are not cheap!!

[@Mhe987]

My top push pin snapped off, of course. Hopefully the 2 screws and bottom push pin are enough!

[@GungaLaGunga]

Woo hoo! Thank you for the nice concise instructions with 8mm bolt and tool requirements.

[@johnmaldonado3909]

Thanks for the easy to follow video. BTW-I have that same shirt 😂

[@travisinhouston]

Thank You for the video. I just changed my driver side turn signal. Appreciate it 👍🏼

[@eagleeye761]

might want to lubricate those two front posts that go in the anchors... had a hell of a time getting the anchor off when it came out with the housing... now lubricated

[@wam0357]

Have your new bulb out of the package before you take the screws out. With that done ahead of time, you dont have to set that light and all the wiring in a precarious position. Also on my 2012 Ford f150, i only have one push pin /peg holding the light in the back, not two, and its about dead center. After removing the 2 8mm screws it did not come out easily, but i was putting pressure on the top and bottom on the edge to wedge it out. When it did finally effect the peg it slid out nicely.

[@fuggedaboudit223]

I have a 2020 F-150. Top right rear turn signal bulb wasnt blinking.Just now took it out. It looked good, so i pushed it back in. Works fine now. Hope it stays that way. 8mm bolt on a Ford. What will they think of next. Good vid.

[@ogmo77]

Thank you for the detailed instructions.

[@adame7951]

Front and rear turn signal bulbs are the same as well

[@wesblanford3024]

So 3 total different bulbs? Brake, blinker, and backup?

[@mohrt13]

thanks man simple and easy guide

[@grantwbubb]

Thank you! Worked on my 2004 Ford F-150 as well.

[@otisharris7380]

Thank you! I feel empowered doing it myself. Peace and Blessings!

[@MikeDSchnell]

Knowing how difficult it is to pull straight out gave me the confidence to pull harder - before watching video, I was afraid of breaking a hidden plastic clip

[@louisdufresne6086]

Got mine out, replaced the bulb, easy peasy but I cannot get the unit back into the truck without there being a gap where the 2 pins are. The bolts line up perfectly and I can screw them in and the housing doesn't seem to move, but it looks odd with the gap. Any thoughts on how to force it back in?

[@harlinowens8872]

Thank you sir, clear and to the point. Appreciate you sharing this

[@jr3254]

I've got a 2018 just tried the left side,and I'll try the trim tool ,

[@angrysnook8839]

Thanks saved me some time!!!!

[@rikkinelson7953]

Thank you for the video! Just please note that you should not touch the bulb while replacing - the oil from your fingers can heat up and make it burn out faster

[@Anon88282]

Great video! Any house hold item I can use to pop the assembly off?

[@anthonymiles9375]

you rock bro, thanks big time

[@kennethdeford7133]

Exactly the info I needed. Thanks!

[@chocolatita50]

Saved by your video! Thank you sir. 👏🏻

[@wy-jomingorbust709]

Just what I needed - thanks!

[@mitch7066]

What are the Gaskets called on the steel of the truck that the push pins Go into I need new ones for my truck but I do not know what them two gaskets are called

[@cmoore8434]

Good video. Thank you!

[@cookie_cake676]

Plz do more reasons: lol 1. Ur cute 2. U know what you doing 3. Its facts 4. I would watch u every week an talk about on my small yt channel x😋

[@haydenhodges34]

Thank you!

[@laurafy]

Thank you! Going to fix mine today!

[@jsdinvegas]

Appreciate the help buddy!

[@johncondry8876]

Very helpful video.... thanks!

[@wrbwn]

Thanks, good video.

[@Vincent-396]

Thank you.

[@jerome7838]

The first bulb you took out was the REVERSE light, not the bottom brake/turn signal

[@venomcamaro]

Thank you sir

[@ajkosova]

Thank you sir!

[@GabeArang]

Thanks 🙏

[@cesarpaez364]

Very helpful thanks

[@alejandrodelmas7948]

Gracias!!!!

[@williampendleton8541]

Thanks

[@kaneadkins9650]

8mm Socket, Sylvania #3157. Perfect.

[@quinnjim]

He pulled out the reverse light and thought it was the turn signal too? Why is nobody noticing this???😀

[@donm9871]

I've had luck disengaging the pins by applying a strip of duct tape on the fixture and long enough to form a handle to pull on.

[@garywilkerson6228]

The Ford dealership in Shreveport wanted me to pay them $125 to do that. Negative, it's still under factory warranty, so unfortunately Ford will have to absorb that massive repair 😅😅

[@atomac23]

maybe next time dont do it with bare hands,put vinyl gloves, extend bulb life. Hand grease actually burns that bulb. but in general great video, helps a lot,saves time and money.

[@KingdomcomeJesus]

1:53 trim tools needed... 🔧 ✔️ ✅️

[@kylehensley4524]

THANKS, too me 10 minutes to do this.

[@markd1882]

thanks buddy

[@Zaay93]

Dang my f150 isn’t getting that good of Mpg. I drive mostly highway.

[@topdawgentlv7029]

Both of the bulbs in my left rear are out including the brake light

[@HomeSource]

Hmm. I wonder if there might be a short somewhere. I’d look for damaged wires. Seems kind of unlikely they would both go out at the same time, but stranger things have happened.

[@topdawgentlv7029]

@@HomeSource swapped them both out and bam problem solved thank god I didn’t have to get into wiring problems or fuses

[@patcoffey7757]

Them push pins are stupid Fought like hell to get it out and one tip broke .

[@branobrap7902]

nice video but don’t touch your bulbs. transfers oils from your hand to the bulb

[@frankthetank8098]

I would recommend to not touch the new bulb with your fingers, wear some clean gloves. The moisture in your skin can make a bulb fail prematurely. Also a dab of grease on the screws and push pins make it easier to remove the next time it has to be removed.

[@dianadavis8005]

Hey everyone do you have to have a Drill gun,?

[@Lil_blueskies]

No

[@terryogletree2128]

Yep

[@KingdomcomeJesus]

0:57 step #1

[@samuels646]

Fuckin legend

[@MrRebelss]

Don't touch those bulbs with bare hands!!!!!!!!!!!!!!!!!!!!!!!!!! *POOF*

[@scott9607]

Great video thank you !

[@QuadeQuick]

Thanks - nice video!

[@DredgeX97]

Thank you!

[@RJ_1911]

Thank you

[@glennevans2566]

Perfect thank you!

[@dabigduong6605]

Thanks

[@campfirerob1089]

Thank you