2021+ F150 Side Vent Light Installation F150LEDS

[@josipdolic6391]

Ordered this from more than a year ago but never dared to install.With these instructions showing I see no problem.thanks

[@F150LEDs]

So glad to hear the video helped! Thank you so much for your support and for being apart of the F150LEDs family! We look foward to serving you again soon!

[@Benjamin06267485]

FINALLY AND INSTALL VIDEO!!!! Btw, you guys need to sell LED brake lights and rear turn signal bulbs. With no resistors or modifications to be done. Just the LED bulb so it can be plug and play. Thanks for all.

[@F150LEDs]

Sorry for the wait, we were upgrading our filming equipment but we're back on a regular shooting schedule now! Thanks for the support and valuable feedback on bulbs! We're always looking for ways to make all of our products more plug and play and we are certainly working towards making that a reality with turn signals!

[@Eric.schmidt]

Installed mine in march and I love them. Still watched the video by the way

[@F150LEDs]

Awesome, glad to hear you are loving them Eric! Thanks for the support!

[@AdrianGarcia-qb3sl]

A color chasing version would be awesome, excited to show mine off today at the truck meet

[@F150LEDs]

Hey Adrian! Thanks for repping the product at your car show, hope you had a blast! Also, thank you for the suggestion, we look foward to serving you again soon!

[@RedSizzler]

I wish you guys sold a tailgate lightbar that is plug and play with taillight harnesses so there’s no splicing or trailer connected messages that pop up when you buy a cheap one and have to plug into 4 pin and not fond of having to splice wiring on a 60k new truck lol

[@CamIAmTV]

Just installed mine on a 23 roush and install was 👌🏼

[@F150LEDs]

Awesome! We are so glad you are enjoying the vent lighting, thank you for your support! Please let us know how we can serve you further!

[@zachb86]

Ordered these and the illuminated door sills for my 2023. Excited :)

[@F150LEDs]

Fantastic! Thank you for your support @zachb6740! Please be sure to let us know if we can help in any way, we look foward to serving you further!

[@zachb86]

@@F150LEDs ordered the illumination kit and cupholder lights as well. Thanks again!

[@F150LEDs]

Awesome! Thanks @zachb6740! We truly appreciate the support and are excited for you to enjoy the lights!

[@scrub175]

Love it. Killer install.

[@F150LEDs]

Thanks Rick, we appreciate the support!

[@billsteeves2974]

Im going to update my last post instead of editing it. I rambled trying to be precise....I got a, ONE, bad light. F150LEDS IMMEDIATELY reached out and rectified the situation. So KUDOs to them. They will be my go to for any future upgrade projects

[@F150LEDs]

Thank you Bill! We truly appreciate your support and look foward to serving you again soon!

[@ChrisMotorONE]

Need this for Gen 2 Raptor.

[@F150LEDs]

Thanks for your comment and letting us know your desire for it! We are looking to expand our offering for this product so stay tuned! We look foward to serving you soon!

[@mylesb3578]

Like the lights , should make a plug and play harness .

[@F150LEDs]

Glad to hear it Myles, thanks for the support and the suggestion! We look foward to serving you!

[@billsteeves2974]

Bought these for my 2022 Platinum. Very first problem was getting the 3M back tape off. the blue covering would NOT come off, the LED strip itself came off of the front rubber. Secondly, once i got the blue backing off the 3M backing itself became unusable, WOULD NOT STICK, to my side vent. The strip itself would not hold as the adhesive backing was not adhesive enough. Cheap product.

[@F150LEDs]

Sorry to hear about the adhesive issues Bill! Did applying the included silicone adhesive help? Either way, we have a new solution for you! Please reach out to our support team and inform them of your issue so they can get you taken care of. We look foward to resolving the issue for you, thanks for your support!

[@markfucile7901]

When connecting with harness do you need to strip the wire insulation first? Thx.

[@F150LEDs]

Hi Mark! No, you do not need to strip the insulation. Thank you for your support, we hope you enjoy the lights and look foward to your feedback. Please let us know if we can serve further! www.f150leds.com/pages/contact-us

[@josephturnbull3659]

Can’t wait to get mine and install them! I used that same side marker for the Amber LED’s in my front grill - can I use it to tap my MKII vent lights as well or is that too much draw on that one set of wires?

[@F150LEDs]

Awesome Joseph! Yes you certianly can 😎. Thanks for being a part of the F150LEDs family! We are excited to serve you!

[@williamminer540]

MKII or MK III - how do I know?

[@F150LEDs]

@@williamminer540 Hi William! We no longer sell the older MKI option, only the newer MKII upgraded version! Thank you for your support, we look foward to serving you! www.f150leds.com/collections/2021-f150/products/2021-f150-exterior-side-vent-led-lighting

[@MrDu24nt]

Very helpful video thank you. How do i wire it to one of the aux switches in my 2021 f150 tremor?

[@F150LEDs]

So glad it was helpful! Check out this video that walks through how the AUX wiring works. Thank you for your support, we look foward to serving you soon! kzbin.info/www/bejne/h6vcdaZ9btWKpqs

[@michaelrix3546]

Installed on my 2019 F250. Install was painless the only issue I had was the lights do not stick well with the sticky backing. I had to really throw on the supplied silicone. They look great! One question I do have is how do they hold up in the car wash?

[@F150LEDs]

Thank you for your support Michael and glad to hear you are enjoying them! We are sorry to hear about the adhesive backing but glad to hear it was resolved with the included silicone. We recommend using plenty of the silicone regardless of the level of adhesion you achieve with the backing so you should be all set! Since you applied plenty of silicone you should not have an issues in the car wash! Please let us know how we can serve you further!

[@reggiemurphy7028]

so awesome

[@F150LEDs]

Thanks Reggie!

[@johngriffin1589]

Does the amber color match the color of the marker lights?

[@F150LEDs]

Hey John! Yes sir, they compliment each other nicely. Thank you for your support!

[@deanbirks]

I took a look at my F150 2022 Lariat and there are no bulbs just one big led lighting compartment with a ton a wires all in one plug? Any instructions for wiring this?

[@F150LEDs]

Thanks for the question Dean! For 2021+ models with OEM LED Headlights you will need to wire into the headlight harness itself since there is no front marker! We have an article with the wiring diagram and colors of wires you'll use for power and ground here: support.f150leds.com/en/articles/5520946-installing-raptor-lights-or-side-vent-lighting-on-a-2021-f150-with-factory-led-headlights

[@johnskedgell405]

Wish you would show a. Idea installing on factory LED.

[@F150LEDs]

Hey @John, thank you for the suggestion! We don't have it on video but do have an instruction article which you can find here! support.f150leds.com/en/articles/5520946-installing-raptor-lights-or-side-vent-lighting-on-a-2021-f150-with-factory-led-headlights Thanks for your support, we look foward to serving you!

[@samharmon4692]

@F150LEDs.com there's two types of factory leds, is it the same for both types? (One has bi leds the upper trims have projector leds) clarification would be nice

[@YankMyRodFishing]

Just got these today. My light strips and quick splice connectors are different from the video. The link on the box for the install video says 404 not found. Kind of shitty tbh

[@F150LEDs]

Hey there! It sounds like you may have purchased our newest model! kzbin.info/www/bejne/iJObqWSYf66dhMk If you have any questions please feel free to reach out to us with your details and we would love to serve you! Thank you for your support! www.f150leds.com/pages/contact-us

[@williamminer540]

I am wondering whether the stickum used on this install is going to hold up to a power drive through carwash.

[@F150LEDs]

Hi there Mr. William, yes sir they absolutely will! Our latest MKII version has an upgraded adhesive that is even stronger and needs no silicone. They will hold up in any condition and situation that our trucks would find themselves in. Thank you for your support, we look foward to serving you soon! www.f150leds.com/collections/2021-f150/products/2021-f150-exterior-side-vent-led-lighting

[@williamminer540]

@@F150LEDs I've seen reference to MKII and MKIII. How do I know which one for my truck?

[@F150LEDs]

Hey William. we only sell the latest version of the vent lights so you just need to select your truck and color and you will get our newest model. Thank you for your support!

[@guillaumedubois629]

Possible to connect on the turning flasher so it sync altogether?

[@F150LEDs]

Hey there! You can certainly do this and have them sync with your turn signals! Thank you for your support, we look foward to serving you further soon!

[@j.conrad5374]

I’m having issues I think with the electrical connection. Got the lights installed and spliced in and nothing. Doesn’t turn on. I triple checked good connection with the side marker lights. Suggestions?

[@F150LEDs]

Hi there! We would love to help you get this resolved! Can you please message our tech team directly so we can get your info and help get this resolved for you? www.f150leds.com/pages/contact-us Thanks so much for your support, looking foward to serving you soon!

[@tymenkentrop5264]

mine didn't work out of the box, would have like to see info on wiring to uplifter switches in the f150, very poor quality.

[@F150LEDs]

Hey Tymen, we're very sorry to hear you had a problem with your side vent light kit! If you haven't already, please reach out to our customer service team through the link below to get a replacement rushed out to you! They can also help advise on wiring to your upfitter switches! www.f150leds.com/pages/contact-us

[@southfloridalunkers6645]

Where do you get thoes splicers??

[@F150LEDs]

Hello! You can find our revised easy T tap connectors using the link below! Thank you for your support, we look foward to serving you soon! www.f150leds.com/collections/brackets-hardware/products/t-tap-wire-connectors

[@cjsjewelers]

Is that a Deap Sea you are wearing?

[@F150LEDs]

Hey CJ's! Your questions certainly matches your name 😜. It is indeed and holds very special meaning to me. Thanks for watching, we hope to have the opportunity to serve you soon!

[@JesusRodriguez-qk6gm]

Mine did not stick aswell it is difficult to get it o stick even with silicone

[@F150LEDs]

Thank you for your support Mr. Rodriguez! The base adhesive is weaker than the included silicone adhesive. It is highly suggested to be sure to be liberal in the silicone application and be patient for it to set up. Thank you for your feedback & support, we look forward to serving you again soon!

[@QRLSpoon]

I try to order from canada Québec and the command cancel twice….🤷‍♂️ i fund light somewhere else.

[@F150LEDs]

Hey SG, thanks for your support! We are sorry to hear you were experiencing difficulty checking out, please contact our support team or let us know a way to reach out and we will be happy to help! Thanks again for the opportunity to serve you!

[@robd.7090]

Took truck apart to find out the 2022 doesn’t have the same light set up

[@F150LEDs]

Hey Rob! The 2021 and 2022 models have the same setup. Please reach out to us so we can make sure we get you taken care of! Thanks for your support! www.f150leds.com/pages/contact-us

[@beyondthedetails]

This is not accurate for the LED model. There is no side marker to unplug.

[@F150LEDs]

Hey there! We have instructions on which wire to connect to if you have LED headlights so no worries! The guide is located on our website or please feel free to reach out to us with your details and we would love to serve you! Thank you for your support! www.f150leds.com/pages/contact-us