First Glimpse Of The New Shop Addition While Working On The Off-Road Roll Back!

#fabrats #offroadrollback #diy
Today you will get the first glimpse of what the new addition is going to look like as we continue progress on the Off Road Roll Back. Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your 4th of July Limited edition shirts today!
www.thefabrats.com/
More videos you'll love:
Off-Road Roll Back Series:
• Building The Ultimate ...
This Family Was Stranded With A Broken Truck And Nowhere To Go! Plus Landon's Truck Is Almost Done.
• This Family Was Strand...
Building The Ultimate FrankenTruck: Merging 5 Trucks Into 1 Epic Beast!
• Building The Ultimate ...
Building Our Most Ambitious Project Yet! Plus, An Update On The New Shop Build.
• Building Our Most Ambi...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: [e-mail]
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

[@briangalloway3684]

Happy Father's Day to all of you Dad's at fab rats!

[@markrebman9882]

You as well!

[@RUDOLF2994]

Балдёж реально 👍🙂

[@paulrivers7248]

Yes happy fathers day to the fab rat dads and happy fathers day too all of the fan Dads too🤷‍♂️😁

[@carl2771]

Mark this date, June 18th 2023, as the first of many fires in the new shop! 🔥🔥🔥🔥🔥

[@MastaT_150]

I could see tilt wheel going in there after it’s built. Personally speaking that would drive me nuts trying to squeeze past that wheel.

[@richardthomas1743]

Happy Fathers day to all Dads! 🎉🎊

[@justpain365]

You too sir...

[@iFNhU]

I'm not sure I feel comfortable watching a hard core criminal like Paul. (Sarcasm) ❤

[@briangalloway3684]

😂😂😂😂😂

[@bryanmorgan8501]

Happy Father's day Fabrats

[@petermoller8337]

Father’s Day in USA but not everywhere. Thanks but I’ll wait until when in Australia

[@bradgerow8565]

Anyone who’s ever had welding slag in the ear canal knows the look of fear on Ben’s face! 😂

[@richardthomas1743]

HEY ! Good morning everybody and thumbs UP to Fab Rats!👍

[@JanelleVocate-Ames]

Mornin' to you sweetie!!!

[@richardthomas1743]

@@JanelleVocate-Ames Good morning! ☀

[@Cletus.223]

Happy Father's day guys!..And side note...Intersting fact: All my life I thought I had 0 allergies then a few years ago I helped cut down a Cottonwood tree and the day after my face swelled up to the point I could barely even see..lol. That boat clip was just proof that the boat had been dry for EVER..There was NO way there was any mussels alive in that thing!

[@markwilde2391]

Cool shop! Having built a few myself I can tell you that once it is finished, you'll realize you didn't make it big enough😂😅

[@Kiki-Kauai]

I’m still blown away at how fast this channel has grown. Every addition has worked great. Sean, Hunter, Ben and Paul have great chemistry. Congrats on the shop and a great channel. It’s safe to say we’re all proud. Thanks for the awesome content!🌺

[@dalecronk4377]

Well said

[@michaelrobbins9679]

If.. you can do what you love doing for a living you will never feel like you are working.. hey Paul! Start showing shop time the love! chelle has her own budget!

[@charleswinner6805]

The off road rollback is coming along great. Shaun is definitely getting more comfortable talking on camera. He’s a natural. Lastly, I hope all of the dads watching this have a terrific Father’s Day.

[@jasonbickford4283]

Happy Father's day fab rats and to any father that sees this!

[@kevinstoughton364]

Great way to start Father’s Day. Hope all you dads have a great day!!!

[@neilfromclearwaterfl81]

Remember to Squint for Safety, ask your optometrist or local ER about it. I know safety glasses can be a pain but most people only get one set of eyes. Best!

[@danielsmith9500]

Happy Father’s Day to all the fathers out there!!! My kiddos cooked me a huge steak /shrimp , broccoli and mashed potatoes . Love my kids more then anything. Congratulations on thr new shop y’all deserve it so much and so happy for u Paul u deserve this new shop big times!!!

[@matthewshoudy7887]

Happy Father’s Day to all you dads out there!!! Happy Father’s Day Paul,Ben and Shawn as well!! Have a great day folks!!

[@johnfitzpatrick2469]

G, day Paul and Michelle from Sydney Australia. The new workshop addition is vibrant progress. Truly a blessed place for business, mechanical engineering, learning challenges and fun times. 🌏🇭🇲

[@XCHANGEDAVE]

I love the way the roll backs coming along. Happy father's day.

[@TheBloatedPony]

Happy Father's Day Paul and Ben and all fathers! Dang I love laughing with you guys. Don't ever change. Thanks for the great entertainment.

[@donlittle832]

Happy Father's day to all the dad's at fab rats 🐀 have a great day

[@timmer1229]

As important as it is that Paul narrates, Love just watching his brilliant silent work also.

[@Northtide]

I think I figured it out. You and your brothers have created a generation of: " Do you remember the time when Paul, Ben, and Sean built that....". Those conversations will go on for years after you are long gone. Great memories are hard to beat. I like the new shop. Can't wait to see it completed.

[@johnhoover4237]

Nice work on the off road rollback. Keep the vintage steering wheel, but add a quick removeable steering wheel kit to make it easier to get in and out of the cab!

[@deweydecimal1446]

I'm more impressed with Hunter with every episode. His aptitude is growing.

[@shannonkoelbl909]

Flipping that part to cut in the band saw is a no-no. DO NOT hold onto a part being cut. It will only take once for it to catch and spin in your hand. Take it from someone with 30 years industrial maintenance experience. I would have NEVER listened to Hunter on this.

[@IEchuckie]

And next time you can get er done with the one hand that you have left.

[@paulrivers7248]

Agreed and when Randall left I thought man hes gonna be hard to replace but then along came ol Hunter lol and what 6 months later here we are and Hunter is an absolute amazing addition to the fab rats family...🤷‍♂️🤷‍♂️😁😁😁

[@thedumbassspeaks]

Is that “aptitude” or “attitude “?🤣

[@joehall6709]

I'm disappointed with Hunter's statement, "Holy Crap" and minutes later, "Oh my god". I used a small "g" because hopefully Hunter isn't talking to the Lord with that blasphemy.

[@dieseldave564]

You are right Paul, that down pipe will get VERY HOT!! I suggest in addition to wrapping the pipe, look into having the inside ceramic coated. Ceramic coating is very effective in keeping exhaust temps in check on custom motorcycle exhaust to the point that it keeps the chrome from bluing. Probably would be a great application for your needs.

[@steinjonah660]

The best advice Paul can get, I have seen many tubes and tv's showing the benefit of the ceramic cote. A bit extra now will save a lot later Claims the the coated exhausts even increase power is made Matt is having big heat problems in the engine bay of his wrecker. Lets learn from his "mistakes:

[@kirk467]

I love the dyne-mat, it cleans up the look inside a old vehicle nicely Paul! 👌🏻👍🏼👍🏼

[@timoldenburg2249]

😂 I love Ben’s “undercover” middle finger to Hunter about fitting under the truck 😂

[@patriot8087]

Wow that new shop is going to be simply magnificent. New "Fab Rat's" World Headquarters, congratulation to everyone for all the hard work that made this all possible.

[@IEchuckie]

Don't worry we'll pay for it

[@thedumbassspeaks]

Make that “The Fab Rat’s World Headquarters”!

[@michaelmcinnis9538]

I think it has more to do with the money they making off you tube and stupid people not ability or hard work

[@jbcollins5781]

the hunter mouse flashback never gets old.

[@PaulBarwick]

I learned to drive in a 10 year old '49 Chevy like that when I was 13. That old girl brings back some great memories. I ♥what you are doing with it.

[@baumannmichael95]

20:57 This is part of the reason i like watching you guys. "Lets make it happen" Your guy's ability to just make what you want is impressive and inspiring.

[@timhenson4815]

Happy fathers day !! So happy for your new shop !!! Can't wait until the fun things yall create

[@robertjean659]

Going to be a great food warmer for the passenger with that turbo pipe there. Going to be a killer truck when done. 🇦🇺🇦🇺

[@BernieRunns]

I love this channel. There are a ton of fabrication channels on KZbin but the personalities are what makes them worth watching. This channel is the perfect mux of rad projects and entertaining, down to earth folks. I cant wait to see what the future holds for Fab Rats.

[@rickhay9782]

Paul, I love your new shop...however you can never have a big enough shop. I would build a separate metal carport enclosure for camper and take full advantage of your new shop area for builds...just my 2 cents...thank you guys for the awesome entertainment !!

[@Rattlecanjeff]

By the time you store the finished projects under cover, you are out of space again!

[@IEchuckie]

Don't worry we'll pay for it

[@haroldphipps3457]

@@IEchuckie how? I don't spend a dime. If I buy a shirt or hat, it is my choice. No big deal. It ain't like they are welfare rats. FabRats don't get money for nothing, they work for it. If it is such an easy deal, start your own channel!!

[@jaywebb3105]

Good morning Fabrats

[@younghoggy]

A GREAT start to father's day, getting to watch a new vid and my wife and kids surprising me with an official The Fab Rats hat!! 😁

[@saintracheljarodm.holy-kay2560]

Have a good fathers day, and God bless amen.

[@stevenstritenberger1761]

Hey guys, thanks for all the great content and Happy Father's Day to you all!

[@Gedit]

Shaun has found his voice, largely by just talking to Hunter as he works. Very happy to see the headline on this one - the new shop - as I had just asked for more info about that :)

[@xvsj5833]

Happy Father’s Day Fathers 💛

[@pedrogunner9750]

In military survival school we were taught one of the best fire starters are cotton balls covered in Vaseline. Get a handful of them, cover them in Vaseline and pack them into a good ziplock bag. Great to have in your vehicle or pack while in the backcountry…along with a good flint

[@cpgisme915]

Best thing Hunter has said, it’s gonna be hot! Might want to wrap that.. you will definitely want to wrap that downpipe! Happy Father’s Day to y’all out there 👍

[@richardthomas1743]

Hell yes to the new shop !!

[@DallasMu]

woohoo new Video to watch before I go off to the lake.

[@JanelleVocate-Ames]

don't rub it in! LOL

[@detroitdiy]

Happy Father's day guy's. Hope you got out of the shop and did something fun with the family.

[@saewoody6366]

Love these FabRats vids!

[@moparman1962]

Ben is under the truck holding parts in place, Paul is up above him raining welding slag down on his face, Hunter asks Ben if he's ever caught his beard on fire, Ben answers at Mach 1, "YES!"...I laugh out loud at 65 decibels.

[@thedumbassspeaks]

Yeah, if you thought the visit from Division of Wildlife “Officer Krupke” was bad, just wait until an OSHA enforcer arrives!😬

[@leodriscoll2929]

I like how there is a window in the break room, so you can see if people are stealing your Dews.

[@karlshaner2453]

I hope you know, beard hair is very flammable!😁

[@olivier2553]

I'd suggest to wall the shop all the way including the last bay and have a half wall, like 6 feet tall to separate the camper parking from the flat floor bay *so the junk does not spill into the camper parking bay). You better have full walls on all the outside sides or the shop and mid walls inside if you want to spare on the cost of material.

[@briscoeparanormal7178]

That is going to be a awesome shop, congratulations Paul.

[@TxRiderDave]

Ben gets haz duty pay for today’s video. Sean is really showing off his fabricating chops. I can easily see now he is a great addition to the team.

[@henrikadman2046]

Poor Ben that was showed under the truck he’s a trooper take it for the team😂💪💪

[@castafelice]

Hi Paul, I usually don't comment on builds but the discharge of the turbo is a pretty sharp turn downwards and might create back pressure or poor flow at that acute angle. If you tipped the turbo down 10 degrees front to back you maybe wouldn't have had to mitre that discharge fitting, just adjust the long sweep bend at the bottom 10 degrees to get back level. Looks like lots of height under the hood? Second option is cut the firewall. Just suggestions. I really like this build, should be great when finished. Happy Fathers Day to all the Dads on your team!

[@williamuskoski1385]

Can’t tip the turbo at all. Would have to tip the manifold which would mean you have to tip the engine. Which you can’t do. Also can’t cut firewall cuz foot room inside

[@cliff4377]

it's backwards, in any sensible universe the cold side would be next to the cab. Bonus if you flip it, no sharp exhaust bend.

[@markstopkey4085]

Paul cleaning the new shop floor with a torch! 😂 If you gotta cut a shaft, you must flip it. If you gotta cut a shaft, you must flip it. 🎶

[@CallitlikeIseeit]

Eye wear and ear wear guys. Use these Dakota Digital VHX Series Direct-Fit Analog Gauge Systems

[@larrydudley2941]

I am watching a year old video with Matt on a mountain with a Lexus and Paul. I want you guys to know how much i love your channel and you guys.

[@Ashley_Schaeffer]

We need a Uncle Ben shirt... In the style of the rice box. Please!

[@TheTuttleCrew]

Ben is the best brother ever going under ther to hold a pipe while Paul welds on it! Potentially getting seriously burned or loosing his eye sight, I'm sure Paul would do the same.... You guys abvously gave him a jeep when his was wrecked and family means everything if you just watch the channel! Great family! Sherm did something right! Happy Fathers Day to you guys (all the guys on the channel)!

[@mcvet57103]

Suggestion. The end bay of the new shop. A pressure washer bay for cleaning parts and cars.

[@toddwilliams5905]

they would want a sloping floor and drains for that

[@davidbruin4381]

HAPPY FATHERS DAY GUYS!! And your little fire trick with the cottonwood fluff was cool 😎. But imagine doing that in Australia on 100 acres of spider web. That's a real cool thing to see. Your shop is gonna be awesome. A suggestion for your blinker switch, use a toggal switch that you turn on the left turn signal, and right for the right turn signal and center turns it off. And have a separate switch for the hazard lights.

[@williamuskoski1385]

Way easier to use a multi function switch. They make them for everything

[@PACOtheTACO97]

you should swap the break room and Michelle's office so you guys can easily switch shops when Michelle is working :) looks great guys!

[@westhomas4206]

Happy Father's day to all of the fathers around the world

[@darrylgibson7430]

Happy Father's day Paul. Tell Shaun to wear glasses when grinding towards his face if he wants to keep his eyes

[@toddhunter2511]

Paul, cover the turbo inlet, keep dust and other debris out.

[@francesrice7898]

Happy Father’s Day to all you dads in the shop. Good video today. ❤️🙏🙏🙏🙏👍👍👍👍❤️

[@KrazyRedNeck]

Happy Father's Day. You guys should use the open end bay for a wash bay for dirty vehicles

[@pedrobedoy9574]

Good Dad's teach your children like he does 🎉

[@wesleyedwards2764]

I thought the offroad rollback was basically going to build itself in 3 episodes. 😂 Safety squints are particularly helpful when lying under a vehicle whether you have your eyes closed or not (and every single time I pick up an angle grinder). It's hard to see what you are cutting while trying to keep metal shards out of your eyes. I hated wearing safety glasses in mills I worked in because they fogged up all of the time. I learned to wear them and cope with the annoyance. Sprayed carb cleaner into a chainsaw jet one time. It came out of another oriface pointed directly into my eyeball. I thought surely I would lose my vision. It cost me some shop time. I survived, but I wear squints whenever using aeresol solvents now. A day with Ben in the shop probably never feels like work. Ben's jovial nature makes a big difference. Hunter does such a good job with fabrication while behind the camera. YT finally recommended Sawdust and Lugnuts. I'm going to check out more content. Have heard a lot about the heat from that turbo pipe. Any extra clearances that could be done on the cab would probably help. My BF had a CJ-7 with fenderwell headers and his floor would get very hot. He put some thick industrial rubber in as floor mats. I think they were heavy duty conveyer belts that had been cut up. Helped a good bit. Maybe add a heat shield on the outside. I would work hard on the heat issue if it will get used much.

[@tonypatrick9362]

Happy Father’s Day to all that have raised children you don’t have to be a dad to be a father

[@wesgraham9588]

With that down pip an your stacks it’s going to rumble

[@trippnbilly7130]

This channel keeps it real.. None of that horrible acting. Thanks

[@robertgibbons361]

Michelle--tell Paul the squinting is not as good as saftey glasses when using a cutoff wheel. LOL

[@williamhickman9107]

Add a few salvaged heat shield tiles from the space shuttle, and the cab will stay nice and cool.

[@POScc]

Paul seemed like he thoroughly enjoyed welding over Ben! 😂 my brother and I would never be able to work together like that.

[@jackmill4235]

I like the lighting in the new shop. Looks like natural sun light.

[@mikekuczynski1552]

The rollback is starting to shape up and the shop is coming along nicely. I hope your having a great Father’s Day . Thanks for sharing your adventures

[@Deadcntr]

Paul just couldn't wait to start a fire in his new shop. For pete's sake it isn't even finish yet.😂 Happy father's day guys.

[@cosarbafilip332]

I have only one thing to say about the new shop... Simply awesome 😮🎉.... Can't wait to see the new truck finished 😁✌️

[@Prisonmike89]

They really make it hard on themselves picking these old vehicles with tiny cab and engine bay. But it's still awesome!

[@Bryanja81]

You should get the chrome on the dash all polished up and paint the interior. Leave the exterior alone as im sure you already planned on, but make that interior pop.

[@twwtb]

We have to play with fire as much as we can today...because tomorrow may never come. Happy fathers day Fab Rats dads.

[@larrypelletier1312]

Ben is crazy letting Paul weld over his head

[@RodolfoLozano-pk1er]

Happy Fathers Day to ALL Fab Rats Dads viewers!!!!!

[@user-re2oo3xs6p]

Ben will sacrifice Life and limb. Amazing!

[@bradtatro8718]

Hunter Is Sharp As A Tack......Good Kid !!

[@ToddAdams1234]

Install a FLOOR DIMMER SWITCH for your dimmer problem. It’s extremely easy to do. 3 wires. Easy peazy!

[@cannonmead2766]

I think this truck should be called FRANK. Short for Frankenstein! Excellent idea for a build right here. good on ya boys!

[@woodrowwilliams1812]

I suggest insulating the bathroom walls from Michelle’s office and also the break room.

[@andrewphillips9123]

Paul are you putting clear panels in the roof. You'll save a lot on lighting. It makes a big difference to the power bill each month. Also I watch another channel called "Mike the scavenger". He goes around looking for scrap metal in dumpsters in Huston. Over the last year he has got truck loads of flouro lights and mercury vapor flood lights that have been pulled out of factories and have been replaced with L.e.d. style lighting that's cheaper to run. Consider it. It means you can save money and pay Ben more LOL He'll love that idea. You'll wonder how you ever did with out it when its finished. It will make a huge difference what you can do.

[@spsliger]

Put a quick connect on the steering wheel

[@jamessavage503]

Happy father's day to all the dad's at the Fab rats shop

[@kimetherington2252]

Happy Father's Day to all the Fab Rats Dad's and all the Dads around the world! That 49 is going to be cool for all to see driving on the roads of Utah! I see a competition coming soon against Fab Rats, and Chad's Fab, the 49er against Kenners 52! What do you say ? Can you make it happen? Tug of war, race, scavenger hunt, a good clean fun competition. It would make an exciting video for all the viewers to see! Til next time, take care, and we'll see you on the next...

[@andrewtegarden9589]

Happy Father’s Day to all dads at Fab Rats!!!

[@DownNDirty_OffRoad]

This Roll Back is going to be a great addition!! New shop is looking awesome!!!

[@newfie66xbox76]

Happy Father's Day To Paul and Ben

[@caseyrenner7024]

been absolutely loving these longer episodes!! so great to see!! can't wait to see Ole Paul Whippin' and Rippin' around in that Rollback!! Diesel Power!!!👍

[@randymiller1604]

I remember when you had 150 viewers you’ve come a long way my boy the shop looks great an indoor bathroom Nice touch can’t wait to see The shop when it’s completed