This video I show manual probing and setting offsets.
Пікірлер: 345
@ChrisMaj2 жыл бұрын
25:36 That tool change, nicely edited.
@65cj552 жыл бұрын
I like channels like this, no annoying intro, just straight into the action.
@daverodwell35085 ай бұрын
And no background music, this is real stuff getting done.
@stanmacdonald10732 жыл бұрын
Peter, thank you for these videos. The amount of effort you put into these while doing production jobs is most generous. The level of detail you provide maybe more than most of us need to see but it gives us a feeling for what it takes to set up and run these jobs. Your craftsmanship and professionalism in both your Machining and your video production is most impressive. Keep up the good work!
@DancingMachine12 жыл бұрын
1:40 I love how you always take your time to properly clean and deburr everything. I am paying way more attention to this at my work since watching your videos!
@Bigblockfooter11 ай бұрын
Hi Peter, what do you use in that spray bottle as a cleaning & anti rust agent ?
@gregkrueger3312 жыл бұрын
I used to work for Ingersoll and one of my last projects that i helped engineer was an ingot scalper. Thing was 191’ long and had an 8’ diameter cutting head and a 1k hp main motor to handle the 30 metric ton ingots. I did all the systems programming and debugging on the very first one they built, also had to install that beast in Saudi Arabia. For being such a “simple” operation, they’re decently complex.
@Tomanista2 жыл бұрын
When the people in the office asks you "how long will this take" And I'm like "Ask me when I'm done"
@kevndo2 жыл бұрын
Lol, especially when you never done a job like that before.
@billmielke73952 жыл бұрын
I like the answer of I think x hours, but it takes what it takes if you want it right.
@kevndo2 жыл бұрын
You got that right. I can do it in that many hours, but you may not like the results..lol
@Sketch19942 жыл бұрын
Q: "When will these parts be ready" A: "When I am finished machining them"
@TommiHonkonen2 жыл бұрын
I always say maybe by the end of next week if nothing goes wrong
@cameronskinner61972 жыл бұрын
I see why he has so much work. He's AMASINGLY fast. On some of those moves his hands are just a blur. I wish I could work that fast, do 8 hours of work in 2!! ;)
@calholli2 жыл бұрын
I like your zero trick-- starting in the center first. That's a really good efficiency insight.
@number40Fan2 жыл бұрын
PETER....yes, I'm yelling. :D Anything and everything that you can show of the work you are doing will be very welcome to most, if not all of your viewers. As long as it doesn't keep you from getting your work done, I'd love seeing every minute of your day. It is FASCINATING! I know you couldn't show any machining of the Titanium rudder fins from the fixtures you made the last few videos, but an update of how things went would be nice to hear.
@adamwisialowski20032 жыл бұрын
Most definitely would like to see the probing video and setting the work offsets automatically!! Please and thank you!!
@MachiningandMicrowaves2 жыл бұрын
Yes please, the detail of how it is done is very interesting (to me anyway)
@trustaskinnycook6102 жыл бұрын
Peter I love the horizontal mill videos anything you can show is awesome. Thanks for sharing
@FinnoUgricMachining2 жыл бұрын
LOL, that coding, reading and writing it fluently, remainds me about the Motorola 6802 microprocessor whose machine code I could read/write quite fluently back in 1983. It was all hexadecimal in a 6 digit 7-segment display having address and the byte therein (MEK 6802). Nice video as always. Thanks!
@saytencushman3758 Жыл бұрын
I love your videos cuz you always show the set up of the parts which is some of my favorite stuff. You lose me in the CNC controller stuff. I feel like manual guys wish they were CNC and visa versa. Lol.
@ForensicCats11 ай бұрын
Thank you for posting and pleae post more, i know its time consuming but level of machining is unmatched on KZbin... Your equipment is beautiful works of art.
@paulshouse5242 жыл бұрын
Thanks for the dramatic tool-change sequence.
@garyshirinian2 жыл бұрын
I'm still on manual machines, and I love watching see skilled guys like you. It's understandable some customers don't like their projects to be shown. Thx for sharing. I wish I went in to cnc long time ago.
@PatrickHoodDaniel2 жыл бұрын
At the beginning of this video, I thought it would be one of those meditative ASMR-type videos, then he started to talk, and I was finding that I was learning so much after coming out of my meditative state. Ha! So satisfying!!
@dlstanf22 жыл бұрын
You do a fine job with your videos. I watched when you were setting up the blocks how you positioned the threaded rod on top of the hold down by using the bolt head of the table to avoid damaging the table. Little things like that are hard to teach newbies. And the detail of the program cycles were explained well also.
@toolbox-gua2 жыл бұрын
I will watch anything you share. Its a never ending learning experience. Thank you.
@oldstudbuck35832 жыл бұрын
I’m not a machinist but still in awe of the skills/knowledge of your work.
@theessexhunter13052 жыл бұрын
The basics never change Peter, vice off stone the bed, clock up next fixture....just love it. I put up the vice yesterday on my old mill..still the same way since 1977
@hambone44022 жыл бұрын
Well, that was educational. I’ve never so much as touched a CNC machine before, and I actually understood about half of what you were doing. Thanks so much for sharing.
@peterdupont75592 жыл бұрын
And they happily say that these machines do all the hard work for you .... Thanks for all your videos.
@expidition072 жыл бұрын
Another great video from the Edge Pecision Shop. Great showing how one can set up this kind of machining. Your videos are very informative and very enjoyable to watch. Thank you for sharing them with us.
@Einzbrn2 жыл бұрын
Never faced a part that large. Great video and thanks for sharing your knowledge, specially with work holding.
@johannglaser2 жыл бұрын
Amazing! Thank you very very much to include all these details! I was wondering since a long time, how these would be done, like how you are changing the pallet top, adjusting the coordinates, how to start a program somewhere in between, ... I especially liked all your sanity checks, e.g., with the tape measure, summing up the coordinates in the calculator, and also the 1-2-3-block trick. The tool change must have been a hell of a work. Thanks for going this extra mile! And yes, I would be interested how automatic coordinate measurements work. Thanks, Hansi
@bugrobotics2 жыл бұрын
The real work of machining! Love the content Peter. Thanks for sharing.
@mattyboyace12 жыл бұрын
Hey. You’ve helped me out a ton man since i discovered your videos a week ago. Learned alot already. I figured out that you’re a bit different before i came across your explanation video. But that’s ok. We all have our issues brother. And thankfully, talents.
@capnthepeafarmer2 жыл бұрын
Great stuff, Peter! I really enjoy seeing all the little checks you do to make sure you're successful. I do something similar with automatic probing in fusion 360. I use the Haas WCS macros to update the G54 based on a static "known" point assigned to G59 that matches my model. That way I never have to manually probe a job, it's just all baked in to the program.
@eugeniopizzorni2 жыл бұрын
Buongiorno Signor PETER. Non mi stanco Mai di guardare i Suoi video. Ottimo lavoro come sempre. Grazie MARSTRO 🤗🤗🤗🤗🤗🤗🤗🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️
@chrisneale74532 жыл бұрын
An amazing video, thanks Peter. Very informative. Your working practices match my night school tutors methods. No crashes yet!
@ramanshah76272 жыл бұрын
A TI-30X user! As you narrated the plans, I was punching them into my own TI-30Xa
@captcarlos2 жыл бұрын
Thank you Peter. I vote yes for anything you willingly show us.
@mikeshort42912 жыл бұрын
Love how you show the operation in the inset.
@jbrownson2 жыл бұрын
Great video, it's fun seeing all the little details of how you work
@johnlawler16262 жыл бұрын
This is a great video for training apprentice with, particularly the set up at the start thanks for sharing 👍
@Steve_Just_Steve2 жыл бұрын
I'll take all the probing info your willing to give. You tha Man Peter! Thanks!
@xenonram2 жыл бұрын
I'd like to see the auto offset programming. Cool tool change edit at 25:35.
@kimber19582 жыл бұрын
Thanks for sharing, also thank the customer. Let them know We appreciate watching their parts being made. To a point
@Andy_Hunter2 жыл бұрын
Always learn something from your videos. Thanks Peter
@Mikael57322 жыл бұрын
I want one of these for Christmas tomorrow morning. I think it will fit in my spare bedroom.
@travisjarrett23552 жыл бұрын
Ha ha! I thought those looked familiar. We have the same exact work boots sir. Excellent video. Keep up the good work my friend.
@smedoz2 жыл бұрын
I’m always astonished by the amount of prep that you go through
@carlosmorais74752 жыл бұрын
Hello there Mr CNC I really enjoy watching your videos. To me you are the very best. Keep up the good work.
@TomChame2 жыл бұрын
Excellent explanation and camera work, beautiful. Thanks.
@25vrd482 жыл бұрын
Very informative and educational . Thanks for the lessons . I'd like to see the entire machining video of the block . Great video .
@Forbidden3032 жыл бұрын
Loving the edits man, good work!
@Randy_M_12 жыл бұрын
I love your videos, you do such a great job!!!
@arnljotseem87942 жыл бұрын
Very educational. Thanks for taking the time to make this.
@jimsvideos72012 жыл бұрын
I didn't count them but I am impressed with the number of shots you set up to make this. Anyone who wants to understand how much time you put into your videos should consider that.
@arfonjones71882 жыл бұрын
YES, I too am yelling, full video please, provided it doesn't take you out of whack with your customer.
@johnnycab89862 жыл бұрын
Liking the quick editing for the tool change, putting the camera on the chain was cool.
@guybrown23392 жыл бұрын
Give him a raise. Stoning his surfaces. Start precision.
@artmckay67042 жыл бұрын
Hey Peter, thank you for sharing what you could! I think everyone understands that customers have proprietary concerns to protect their stuff. You can't help that. Btw, I'm still very curious about how strongly your custom toe clamps grip the part..... Now that was a clever design! You're quite the innovator! You definitely have a fun job! I'm almost jealous but happy for you that you get to do all of this fascinating stuff! Thanks again Peter! :)
@chrisleech15652 жыл бұрын
Very clever tool sequence Peter.
@mattfuchs76262 жыл бұрын
Thanks for showing grabbing a 1-2-3 as a quick Z safety check before going full depth. Years ago one of my guys always programmed with a 6" z first so he could use a scale to check every tool. I still use 6 or 1 and even on repeat programs to double check and or catch a boo boo.
@hk-bp5ku Жыл бұрын
love your videos. thanks
@erikliebtrau27402 жыл бұрын
Great Job! Keep on doing so..! Greetings from Germany.
@juanyamasaki99302 жыл бұрын
another good lesson Peter.thanks
@gordonjones15162 жыл бұрын
The feed hold sanity check was one of the first things I learned as a CNC machinist.
@TrPrecisionMachining2 жыл бұрын
very good video peter..thanks for your time
@davidcox6922 жыл бұрын
Great video again buddy
@gv77562 жыл бұрын
Cool Cool Cool And I like the perfect commercial placement when you hit the first cycle start went directly to a kenemetal tool on the lathe
@EdgePrecision2 жыл бұрын
I'm curious, because I have no control over what adds are played on videos. Are you referring to a actual add for Kenemetal tooling showing on my video?
@gv77562 жыл бұрын
Not sure if it was the kenemetal or a site selling them but was perfect placement almost looked like that's what you had put in the machine. I didn't think you placed it but just came out like it was 👍👍
@bhimapandava77672 жыл бұрын
Yes, I would really like to see a video explaining how the automatic cycle works and how you use it.
@Chorca2 жыл бұрын
Love the tool change bit there, that must have taken some time to set up each of those shots and cut them all together! Great work!
@hewlejr2 жыл бұрын
Wow! Super impressed!
@MetrologyEngineer3 ай бұрын
I’m a little bit surprised you don’t use and drill or impact to remove or install the socket head cap screws onto your table. As well as using a torque wrench to tighten everything. Still fantastic work and I learned a ton from watching this!
@miles323232 жыл бұрын
I would definitely like to watch a video about an automatic probing cycle.
@Equus_Master2 жыл бұрын
Great! Greetings from Republic of Korea
@dtiydr2 жыл бұрын
Very good camera placements!
@jeffgreene60422 жыл бұрын
I see guys like you... and awe at your knowledge and understanding. Then I see on the news that a teenager want 15 dollars per hour to make a hamburger... and... I wonder what's wrong with this world.
@T-rock_chr0n1c Жыл бұрын
Another great machinest channel
@Bianchi772 жыл бұрын
Nice video, keep it up, thanks :)
@brantonbeall90612 жыл бұрын
Definitely do want to see a video on probing automatically!
@airgunningyup2 жыл бұрын
when most of your day is fixturing and machining is a second op
@hansdorfer33712 жыл бұрын
I remember when we machined really large aluminum Castings like this, using a 300mm Facemill on our big vertical boring center
@lwilton2 жыл бұрын
Peter, I think when you were measuring the finished 14" you were saying that the top was slightly wider than the bottom. I was wondering if this was the result of tool pressure, or possibly because you set an unmachined surface on 4 blocks rather than 3, and possibly it could wobble a little? Would using 3 blocks have been any more stable?
@truthcam12 жыл бұрын
Great videos ...
@jaycrook10762 жыл бұрын
Hi Peter. Great video. I would also like to see the probe auto-setting the offsets. Thank you in advance.
@dnjmachine2 жыл бұрын
And I complain when I have to take off my 6" vise... Cheers from Texas
@tonibauer84492 жыл бұрын
Definitely recognize those mitzs ran them for about 5 years. The 800mm ones.
@dan30762 жыл бұрын
looks like you made your own pallets? real world!!
@steelwheelsminnesota2 жыл бұрын
Man if only all the saw cuts were that straight! Good video. Ever consider writing a trig cycle for your offset evolution around B? I have a couple days of doing it. The first will wrap your G54 B0 position to any other B angle/offset number. The second way, my preferred way, will run the same offset for any B position. It references B0 position, reads the current B position, calculates and sets a program offsets. Programming that way, all locations follow print dimensions.
@jessefoulk2 жыл бұрын
That's really awesome
@macaion8972 жыл бұрын
Good job!
@duncanbell14253 ай бұрын
well my new found friend, I am amazed at your skills you are unbelievable engineer that's for sure, but please invest in a Milwaukee it would make life easier quick fastening stuff down, I am watching and learning from you at 73years old Top Man
@davekeach48982 жыл бұрын
Nice Editing of the tool change segment.
@joelhart90202 жыл бұрын
Nice job as usual thanks for sharing, have you considered a 1/2 inch drive impact driver for all those cap screws?
@mtraven232 жыл бұрын
im now watching you do your fixturing in avoidance of doing my own (much smaller) fixture.
@Tacomaguy4582 жыл бұрын
Man, I miss running aluminum... The shop I work at we only run castings, steel weldments and 8620 for the most part. I run a big boring mill but every now and then I'll hop on a 600mm pallet horizontal when they need help. My table is a bit bigger at 63 x 86. Most of the parts I run are between 6-12 thousand pounds... lol I havent seen any of your other videos but, you could cut down a ton of setup time going to ball locks to align your tombstones. Dont really need to dial in as long as everything is clean going on.
@guybrown23392 жыл бұрын
Removing a machining tombstone with a beautiful Kurt vise
@williamschmitz22182 жыл бұрын
Ah man just watching you take all those cap screws out and back in made my wrists hurt, ya need one of them impact drivers
@cristinelpricop2 жыл бұрын
I'd like to see the automatic offset probing and some of the math behind the variables. :) Thanks.
@tomb77042 жыл бұрын
Peter - “Would you like to se..” Me - “Yes”
@MrNeverseeme2 жыл бұрын
Those picky weird customers :) just let them know we the viewers do not care about them building there space crafts or what not we just like the content you share its informative and educational... not everything has to be hush hush secret secret proprietary mumble jumble. Great vid as always... From Cali...
@James-fs4rn2 жыл бұрын
👍 thanks for sharing.
@christopherterry58312 жыл бұрын
Always but always use packing around sharp edges under lifting straps 5:09
@emrfixit2 жыл бұрын
This was awesome, I love the tutorial on the numbers... Can we see more???
@EdgePrecision2 жыл бұрын
Look at my newer video after this one.
@MetrologyEngineer3 ай бұрын
Nice tombstone!
@demondude3600002 жыл бұрын
Used to love it when we got an aluminium part in as opposed to the traditional Inconel 718, the jobs seemed to fly past! Just wondering on this sort of operation, have you tried out round insert face mills at all with a lower axial depth? Due to chip thinning you can really get those cutters movin'
@EdgePrecision2 жыл бұрын
On other parts in this group of parts I do use a milling tool with round inserts to rough with. Its a 2.0 diameter with five inserts. I run it at 5500 RPM at 200 inches per minute fee .150 depth of cut. At a full width of cut it draws 100% spindle load of this 40 Hp spindle.
@demondude3600002 жыл бұрын
@@EdgePrecision sounds aggressive, although with softer materials that's the only way to be I've been doing some research lately into cutting technology and it's really opening my eyes to what's possible when using the right type of tool combined with the right toolpath. As mentioned before the chip thickness is the key with cutting rather than simply using feed per tooth when engaging on less than the radius of the insert/cutter
@tedsaylor60162 жыл бұрын
Peter, can you explain the Axis Arrows painted on the forging? Is that the company mark, or some indication on how it was forged and the resulting grain structure? Do those arrows matter in how you machine the forging?
@EdgePrecision2 жыл бұрын
They are the grain direction. For this part it isn’t necessary to know.