factory47.com/shop-by-part/ha... This works with any of our Road Glide handlebars. We have an updated video for 2021-23 models here: • How to use stock cable...
Пікірлер: 203
@Davy197244737 жыл бұрын
Really makes my bike look awesome. 14" bars were perfect size !!! So glad I went with Factory 47. Flawless fit and finish. I would highly recommend
@ctanleywitac12364 жыл бұрын
how tall are you???
@johndurham89653 жыл бұрын
I'm 5'10 and I went with 14s
@CastleBaggers2132 жыл бұрын
First off, I want to say thank you to Factory 47. Your shop in Whittier is amazing!! Second, Your customer service is of the utmost excellence! Third my bars are great!!! This install video help me in doing my STR Miter Bars 14'' on a 2022 Road Glide FLTRX. Super easy process that took me only an hour to achieve!! Thank you Factory 47!!
@freedommasteroflife6 жыл бұрын
I got the 12inch followed the video for install on my 2016 road glide, simple process, with a 6 pack of cold ones.... hands use to go numb when I ride, now I'm flying in the wind....1 Luv for factoy47....
@HDRomine8 жыл бұрын
Installation went well. There were some changes between the 2015 and 2016 Road Glide. It's a positive change. The big plug that had to be removed is smaller and does not have to be remove to pull the wires through the bars. I am glad I bought the bars.
@Factory47cycles8 жыл бұрын
+HDRomine Thank you
@lawdawg58237 жыл бұрын
HDRomine how easy was running wires through with connectors on? Didn't give you any problems?
@bigkyle73955 жыл бұрын
Thanks for the heads up, just took apart my 16’ road glide to install these bars, I’m like where’s the big plug???
@superduty1318 жыл бұрын
First off, Thanks for making this video! Second pictures DO NOT do these bars justice!! "WOW"...I received my bars yesterday and after unpacking them from a very large high grade box I am blown away by the quality of these bars!!! Factory 47 ... WELL DONE!!! Fit , Finish-and overall quality is beyond my expectations. The chrome finish is true SHOW QUALITY!! Are they expensive?? Yes! But you really get what you pay for!! Thank You Factory 47, you are at the top of your game!! True Made in USA Quality. And to all the do it yourselfers, Watch the video.......its as easy as they show to install on the rushmore R/G's. No cable extensions, no brake or clutch lines replaced, unless you go over the 14 inch bars. Or pay some one $350-450. To install. I checked on 2 different shops and 3-4 hours is what they quote at $90 per hr.
@Factory47cycles7 жыл бұрын
Thank you for the review and we are glad you enjoy the bar. We take a lot of pride in making each bar.
@00Marez004 жыл бұрын
That's doable, someone just quoted me $$1800... he said it's a minimum 7 to 8 hour job!
@chrisr31554 жыл бұрын
Manuel Mares my dealership quoted it at 4hrs. Either way, it’s a rip off having them do it.
@baildriv12 жыл бұрын
Thank you, this is the video I could find for lacing wires through my style apes. Great video.
@HDRomine8 жыл бұрын
My bars came in today! I have to say they look absolutely great. I will let everyone know how the installation goes!
@JohnYoshii3 жыл бұрын
5 years is a long time to be still installing....
@angelandresgarciagarcia59559 ай бұрын
Now there are 7...😅😂
@mikeannan59762 жыл бұрын
Needle nose pliers for cluster screws you are the man. What a pain in the ass those screws are. Thank you for the tip
@frct725 жыл бұрын
I got a 12” F47 bars for my 2019 Road Glide Special and its a pain in the ass to install all these cables.
@noneofyodamnbidness63738 жыл бұрын
Nice job brother…time and patience!
@sam74sgtarms8 жыл бұрын
I love my 18"flat black factory 47 bar on my 2015 road glide special:)
@ctanleywitac12364 жыл бұрын
hows that ride.... im 6'3" try to choose a nice size
@rippedhog24828 жыл бұрын
mine on order ..can't wait
@ALPHAFTUCK5 жыл бұрын
Installing 12's on my '08 Road Glide this weekend 🤘
@jiggawuhhjiggawho3 жыл бұрын
Any updated pictures? I have the same year bike and am thinking about 12s.
@bav1144 жыл бұрын
Fantastic!! Can’t wait to get some.
@javoncharles19867 жыл бұрын
Excellent video @Factory 47 Cycles I recently installed my signature series bars on my 2017 RG standard and this video is 100% accurate as of how to install these bars took me maybe 1 1/2 hours with no help using all components in this video and I installed a set of Avon air cushion grips it is a very nice upgrade to the scoot and makes it very becoming and comfortable for the highway thanks for creating such a great product I saved $1000 bucks for investing in these ape hangers instead of having harley do a set of bars for me( $1500 bucks) thanks again!
@ajs33296 жыл бұрын
Javon Charles did you have to extend the wires and cables and do you have a version with abs lines if you did have to change your brake lines?
@javoncharles19866 жыл бұрын
ALJamaine Smith no I have the standard and no I didn’t have to extend the wires at all nor the brake lines everything was kept stock for the 14” ape hangers best product and bang for the buck if you ask me harley charges around 12-1500 bucks for an ape hanger install so with a lil time and patients u can install these in an hour or two tops and ride out in style
@rickgagne85645 жыл бұрын
Did you relocate and wire or lines to make them longer? And does it make brake and clutch lines tight when you turn left and right?
@JoseRodriguez-zg8ls4 жыл бұрын
H-D just quoted me $1400-1500 trying to tell me I need the cables and that it would take 8 hours. Thanks to this video I will not be going that route. Also got signature 14”.
@Chilllybob Жыл бұрын
I just did my bars . First I use cable lube, I did two cables at the same time alternating as I push & pull each one..I also installed kahuna heating grips which made the left side a pain .
@prjab73393 жыл бұрын
Just ordered a set for my 17 RGS! First mod stock bars bother my elbows!!!
@gutierrezc87095 жыл бұрын
amazing work brotha!
@OUTLAW21X7 жыл бұрын
awesome video saved me hundreds of dollars. no need to take plug loose on 2016
@Factory47cycles7 жыл бұрын
Glad to hear.
@ristearduihulginn35547 жыл бұрын
Which plug? At what point in video?
@Factory47cycles8 жыл бұрын
@Gregory Johnson No you can use all Factory lines
@louisbors3975 жыл бұрын
These work with adding heated grips also
@molonlabe57514 жыл бұрын
great video
@Factory47cycles8 жыл бұрын
Yes it is JonBlackboy but only for 2015 Road Glides
@curtosman39607 жыл бұрын
2016 road glide install. can I add heat demons and also run the wires inside the bar? any special instuctions?
@HDRomine8 жыл бұрын
I ordered a set 14" on 10-16-2015. I will let everyone know how it goes. I am installing them myself on a 2016 Road Glide Special. I will be going step by step using the video.
@rickromero66138 жыл бұрын
I have a 2016 will this bars fit the same way???
@HDRomine8 жыл бұрын
Yes. I put them on my 2016 Harley Davidson Road Glide Special. They are awesome!
@Factory47cycles8 жыл бұрын
+Rick Romero Yes they will
@rickromero66138 жыл бұрын
+Customer Service thanks brother for the info
@blsrulz8 жыл бұрын
+HDRomine How long was the install.
@sluggomagoo5 жыл бұрын
Hi, this video is awesome. A little over 3 years old. I have a 2017 Road Glide and at some point I will be swapping out the bars for a set chiseled. I'm wondering about the pin. Is it necessary to have it installed. I'm sort of short and wanted to pull them in an inch or so.
@cloverkingproduction71246 жыл бұрын
I’m about to order my bars and I’m going to do a KZbin video for my the people who keep telling me I need new cables for 14” bars.
@lon22784 жыл бұрын
CloverKing Production did you need new cables?
@fxrst_anvers69765 жыл бұрын
Look Awesome feel perfect
@EMMANUELC66 жыл бұрын
I just brought a 2018 road glide and I want your bars!! I need to change the clutch cables and brakes cables?
@kylermelson16776 жыл бұрын
Will these fit on a 2018 road glide special without any extensions
@biggshd7576 жыл бұрын
Do you have to shim the front brake lever? To not break the switch on the 15+ bikes
@aqcrc513 жыл бұрын
thanks will be installing my 14" Rivera's soon. What was the glue used for?
@lilianmiralles74947 жыл бұрын
for the 14 pouces , without changing the clutch wire and brake wire for road glide 2015 ? Must it change the electric cables ?
@lawdawg58237 жыл бұрын
Did you install new poly riser bushings for these bars?
@Reneemitt3 жыл бұрын
Just purchased a 2021 rouadglide, I know its now a cable instead of Hydraulic, will these work without having to change out clutch cable?
@ajgill206rr6 жыл бұрын
Step @ 3:42 do I have to do that or can I just feed the cable through the bars with that connector?-Thanks
@canadianblueprint5 жыл бұрын
Can anyone confirm if this method did work for 2018? Did the check engine light stay on for everyone in 2018. Wanting to try this on a 2019
@1bagger296 жыл бұрын
Where you able to install those 14 in with using your factory cables and wiring
@nclanos6 жыл бұрын
I have a 2018 road glide will I have to extend the cables?
@dwaynehill66176 жыл бұрын
I change my handle bar from the stock to 18"
@fastwayne816 жыл бұрын
Anyone have problems with clutch feel after install. Almost like air got in the system.
@daltonevans94395 жыл бұрын
Does the big plug have a diagram where the wires go back?
@jmanderson66 жыл бұрын
what tool was used to undo the wires from the harness?
@jasons39197 жыл бұрын
will this work on 15 FLTRXS with stock cables and lines? HD says stock 6" will not stretch past 2", they lying. video looks convincing but just wanna make sure is all .
@stevebowley63484 жыл бұрын
will these work on a 2005 Road King without having to extend cables or wires?
@qwsa644 жыл бұрын
For a 2015 ultra limited do you need to change cables for 14inch?
@drumsforlife94746 жыл бұрын
At exactly 14:06 you are putting the wires back into the small plug but you never show how to take those wires out ... did I miss it or you skipped it .. I can’t get that plug to pass threw the bars , so it has to come off .. how do you do it ..? Thanks
@causa20096 жыл бұрын
Nice beats.
@ericgodfrey56325 жыл бұрын
I'm kinda hoping my bars come with a mix tape!
@Factory47cycles9 жыл бұрын
@Jesse Glatz You do not need that panel.
@jamesbell53547 жыл бұрын
Nice soundtrack
@williammann50823 жыл бұрын
hey guys quick Question im taking of my stock handle bars off my 2015 road glide special and putting on 14 inch factory 47 assault bars do i need to get extenions cables
@qballbaca5 жыл бұрын
Would be the same for 15 ultra cvo
@asashaw95923 жыл бұрын
Just got my 14". Not sure if they're gonna fit with the new clutch cable on the 2021's sucks cause the aftermarket is available yet.
@mikaedwards94113 жыл бұрын
I got 14” for my 2021. Today. How the install go.? Was New clutch cable needed?
@fourftr4 жыл бұрын
Honestly how long to change out those bars
@mazinbuds7 жыл бұрын
@Customer Service WIll the installation procedure for 2015 CVO roadglide will also be the same? as we have heated grips.
@Factory47cycles7 жыл бұрын
Its a little different due to the other side has the internal part for the grip and a few more wires. But its super easy.
@incmplteGORILLA7 жыл бұрын
Hey Factory 47, why does Harley tell you that you need me wires and cables for 14in bars. I know to make $ right?
@therealkarkus4 жыл бұрын
How long should this installation take?
@justinkasey10888 жыл бұрын
I have a dumb question ? On a 2016 R G ultra can I roll the handle bars forward for comfort the pullback mode sucks and it's 2,000 g's to replace with apes the stock bars in the right position has to b cheaper, please give in put
@Factory47cycles8 жыл бұрын
You can, just pull the pin out. It pulls straight back.
@patrickconstant57263 ай бұрын
IT Looks like the STR Miter bars have the factory pin notch at the bottom of the bars so you don’t have to pull the factory pin in the riser. The picture on the webpage shows the clearance notch as well. Is that correct? I believe it also states that in the video to leave the pin. The bars are made to accommodate. Correct?
@eagbaseballadventures30675 жыл бұрын
Wonder if it fits stock wires and cables on a 2017 roadking anyone knows?
@nomargins5 жыл бұрын
Not if you want them to look original
@chasingexcellence22465 ай бұрын
I have a 2024 and I cannot get enough play out of the clutch cable. Do you have any suggestions or am I missing something? Other than that it went fine.
@karlnickola74068 жыл бұрын
i have 12.5 tallboys on my 2015 road glide special that were installed with all factory wires and cables. i want to change to the 14" chiseled bars by harley, will these be capable of being installed with all factory cable and wires as shown?
@Factory47cycles8 жыл бұрын
I would think so with 14"
@nicholasandrews86237 жыл бұрын
Could I do 12" hangers on a 08 road glide without changing the clutch wire and brake wire. Or could I go as tall as 14" ?
@Factory47cycles7 жыл бұрын
No only 10"
@MrDPdrum6 жыл бұрын
Stock lines will NOT work with 14 inch bars, on 2018 Road Glide Special. I found this out the hard way. $300 for new lines.
@nomargins5 жыл бұрын
You are so right they don't talk about the hydraulic clutch and the brake lines only thing fits is that middle extension piece that's about thirty or forty dollars 👍, I have mine I love them though just pay the money get them done right.
@kevincrew47702 жыл бұрын
How tall are you? I’m 6’3” waiting to know if 14” is tall enough or would you recommend 16”?
@lawdawg58235 жыл бұрын
What’s the name of the song that starts out the video?
@chriscouchon095 жыл бұрын
I want to do this on a 2019 roadglide special. Will ALL cables and wires reach? Also does abs make a difference.
@chriscouchon095 жыл бұрын
So I went forward with the install and all cables/wires did reach. ABS did not make a difference. Great bars easy install! Nice work Factory 47
@therealkarkus4 жыл бұрын
How long did the installation take?
@Jason576688 жыл бұрын
From what I can tell there were no modifications to the brake lines and clutch cable. Is this correct? Would you say that anything above 14 inch rise would need all new cables and electrical extensions? Thanks.
@Factory47cycles8 жыл бұрын
Yes anything above 14". But only for 2015-17 Road Glides
@1bagger296 жыл бұрын
Customer Service actually Factory 47 figured out a way to do up to 16 in with repositioning stock cables
@bretoliver12287 жыл бұрын
Is it the same for a 2017 street glide special? and if not what is different
@Factory47cycles7 жыл бұрын
No this is different. For the street glide you need to take apart the whole fairing and extend your cables and wires.
@iflyaaord3 жыл бұрын
Does this work for the 14" Legacy bars?
@daddygee458 жыл бұрын
IT DOESNT STRETCH THE BRAKE LINES? I WAS GOONA BUY THE 14" YAFFE BARS BUT THEY SAID I WOULD HAVE TO BUY NEW LINES AND WIRES FOR MY 2015 ROAD GLLIDE
@Factory47cycles8 жыл бұрын
+Gregory Johnson We have sold over 500 and personally did 20 of them.
@1bagger296 жыл бұрын
Well I just did 14 inch on my 2017 Road Glide although the wires were long enough the clutch cables not too bad but the brake line although it's up there is very tight
@kintoramessesiii93505 жыл бұрын
I never saw a reply from customer service on weather you need to extend the stock cable and wires for 14" bars on 2018 Road Glide special.
@Elwinator35 жыл бұрын
Hi Dylan, I installed with some HD extension wires merely because I didn't want to pry away the connection behind the instrumentation. To me it made it easier and kept it original.
@kintoramessesiii93505 жыл бұрын
@@Elwinator3 Thanks Alvin.
@PezRacer4 жыл бұрын
Alvin Gallegos Thanks for your comment. Any issues with your stock clutch and brake lines being long enough?
@kintoramessesiii93504 жыл бұрын
@@PezRacer no problems at all.
@BigTee30997 жыл бұрын
whats the music too?
@natepinkley7 жыл бұрын
Of course... it always looks easier on KZbin.
@bradarnold49205 жыл бұрын
Hey guys I was just wondering some people have told me that I can use the factory cables just extend the wires for a set of 16s on my 19rgs I was just wondering if you guys knew
@1bagger295 жыл бұрын
Brad Arnold for 16s you will to change cables.14s is the max
@KAGEDEVIL4 жыл бұрын
You can use 16 in bars and use your factory cables you just have to cut the tie and the plastic piece underneath and reroute
@jasoneaton45142 жыл бұрын
I've watched a few of these videos. Why doesn't anyone ever pull two pull strings in the throttle side then pull one of them out of the control location so they can pull all of the wires at the same time? I'm an electrician and it can be a pain pulling wires into a conduit that's already pulled. This is how I would do it it would avoid having wires twist around those already installed.
@davidesparza94008 жыл бұрын
would I need to buy a wire kit and new brake and clutch cables to install on a 2013 road glide ?
@Factory47cycles8 жыл бұрын
+David Esparza Yes you need to buy new cables and wires for 2013
@Factory47cycles8 жыл бұрын
+Customer Service Yes you do
@yakovlev88fcsm6 ай бұрын
Do I need cable extension for Road Glide CVO 2018? Same bars Factory 47 Handlebar Chrome Signature 14?
@JesseGlatz9 жыл бұрын
Right around 18:40 you disconnect the plugs from what looks to be a plastic mounting piece and then don't reinstall it, why is that part no longer needed? Docents it keep the wires neat and keep them from moving around and such?
@Factory47cycles8 жыл бұрын
+Jesse Glatz You don't need it and it gives the wires extra room
@1bagger296 жыл бұрын
I removed my plugs from that plastic piece and you definitely need to to fit the wires back together but I left the plastic piece in there was no need to take it out wasn't in the way
@inoginoino Жыл бұрын
Thank you,I was quoted $400.00
@statessu8 жыл бұрын
how much different would install on a '13 RG be?
@Factory47cycles8 жыл бұрын
Its a lot different. Plus you can only go up to about 10" with stock cables and wires.
@DRIFTFACTOR38 жыл бұрын
now is this the same process of an 06 road glide
@Factory47cycles8 жыл бұрын
+Benihana Larry No sorry
@TampaBayDino6 жыл бұрын
Will these fit on a 2018 Road Glide Special? I'm thinking so....but would like to be sure. Thanks in advance.
@Buszzbait696 жыл бұрын
I just did install on my 2018 RGS w these 14” and the wiring just comes out from the bottom hole making things tight but works. Everything works but my engine light stays on. I loosen the controls one at a time to see if it was a pinch wire and no luck. Going to check code and see if I can clear it...Anything else I should check?
@rainsadventures83676 жыл бұрын
Buszzbait69 did you ever get the issue resolved?
@Factory47cycles8 жыл бұрын
@David Esparza Yes you would
@warrickroper43574 күн бұрын
How much are the bars and where can i get them
@TheBigruss3188 жыл бұрын
hey I have the same bike how much will u do my for$$$ the same bar
@Factory47cycles8 жыл бұрын
+big b big b The bar is $450
@notdrphildrmike8 жыл бұрын
Should I presume this is the same for the '15 Road Glide Special as well? Are the Malo's usable for the '15 special?
@Factory47cycles8 жыл бұрын
Yes.
@booboo11417 жыл бұрын
I called local HD shop to inquire if I needed new lines and they told me all new lines and a twist grip sensor if i installed their 14" road glide handlebars (part #55800440). Any ideas, other than getting taken to the cleaners! I just saw video and I want your bars!
@Factory47cycles7 жыл бұрын
As long as it is a Road Glide 2015-17 it will work. Show them this video.
@annaconte48907 жыл бұрын
what about a 13 roadglide
@showtimedawson79996 жыл бұрын
Is that the stock clamp?
@dronepilotbob4697 жыл бұрын
Omg the dealer said 20 ft lbs I made it 20 will I be ok
@Factory47cycles7 жыл бұрын
That is fine. The tighter the better as long as it never broke.
@xnowxforeverx15 жыл бұрын
I picked up a 2018 can I do 14" bars without cable extensions and lines
@Elwinator35 жыл бұрын
Yes but if you want to avoid altering the stock appearance you can get HD extensions. I bought HD extensions for less.
@ronaldlsmith18 жыл бұрын
where are you guys at i need my bars done 07 ultra classic
@Factory47cycles8 жыл бұрын
+ronald l smith Pico Rivera CA
@ronaldlsmith18 жыл бұрын
Cool see you all in june I'm riding down from Chicago
@brianflint72195 жыл бұрын
This procedure would be the same for a 2017 road king using 14 " Malo bars
@Factory47cycles5 жыл бұрын
No, it is different. Unless it is a special model you would need cables.
@brianflint72195 жыл бұрын
@@Factory47cycles you can do it with a road king special. But not 2017 standard road king correct. Will need clutch & break cable's.
@shadowdyablo5 жыл бұрын
So you are telling me I can use factory lines on a 17 road glide if I only go up to 14 inches?
@nomargins5 жыл бұрын
If you do it's going to be real close to tight. unless you don't care how your wires stick out got mines done two years ago I tried it didn't work at the dealership install them in. 216
@SickBoyExtremeLimitz6 жыл бұрын
Does anybody remove the pin so they can put the bars the way they want them instead of at a fixed position
@brogus065 жыл бұрын
I punched in the pin to move my stock handlebars forward. You'll be fine. Most bikes don't have the pin anyway.
@Elwinator35 жыл бұрын
NP it will move without doing anything.
@SickBoyExtremeLimitz6 жыл бұрын
Y’all ever hear of a battery operated drill to make things a little quicker
@vaughnfontenot45353 жыл бұрын
How
@rickromero66138 жыл бұрын
I need them in black , how do I other them ??
@HDRomine8 жыл бұрын
Call and talk to them. They are very helpful. Andrew is the person I spoke with the most.
@rickromero66138 жыл бұрын
U been a great help brother , u have a number for them ? I been looking and I don't see to find a contact ..
@HDRomine8 жыл бұрын
562-692-5227
@CAPOSAPO8 жыл бұрын
+Rick Romero don't bad customer service incorrect wait time.
@pammelasanchez92347 жыл бұрын
Rick Romero 0l
@SickBoyExtremeLimitz6 жыл бұрын
Just kidding great video
@nicholasroth5106 жыл бұрын
I take it this will work for the 18 RGS too?
@Elwinator35 жыл бұрын
Yes it will I ended up buying HD wire extensions and installing heated grips. I used extended wires so I didn't alter the original wire placement. Where you see him using a needle nose pliers wasn't needed I had easy access to the screw heads with a screwdriver.
@nicholasroth5105 жыл бұрын
Thanks I didn't have the patience so I just went and bought them. I did have to get the wire extensions from the website, but after I put those on these bars were a breeze to install. All in all probably 4 hours from start to finish.
@massivepump30594 жыл бұрын
Alvin Gallegos that part threw me off. Is it because the original wires aren’t long enough to bend the bars giving access to the screw with a driver?
@jahmakecan6 жыл бұрын
what is the liquid in the bottle?
@Factory47cycles6 жыл бұрын
Super glue. We used it to re glue the stock grip.
@jahmakecan6 жыл бұрын
is that a necessary step?
@CactusJack2526 жыл бұрын
jahmakecan yes
@jodymcclure13005 жыл бұрын
a narration of what the tech is doing would be a lot better than the music