Loved how you opened the box. So professional like !
@SleepyPantsSimRacing7 ай бұрын
Yes, no amateur could replicate that feat!
@mercenarysaw7 ай бұрын
One of the best channels. Still rocking your old Aiologs shifter off ebay. Still love your videos brotha 👊🏽
@SleepyPantsSimRacing7 ай бұрын
Thanks man! I assume it's still running strong!
@Sithhy7 ай бұрын
Now that's a *short* shifter
@SleepyPantsSimRacing7 ай бұрын
I nicknamed it "stubby or stubbs" depending on my mood.
@richardthompson76117 ай бұрын
Good review and cool looking little shifter...
@SleepyPantsSimRacing7 ай бұрын
Yes indeed! Super cool
@SIMRIG4127 ай бұрын
Very nice! Only one problem I see with this is it’s going to sit way lower than your handbrake handle. Unless you don’t use a handbrake. But still a nice item
@bobradar7 ай бұрын
I've always preferred to run my handbrake a few inches higher than the shifter. For me, it just feels more natural that way.
@SleepyPantsSimRacing7 ай бұрын
I just raised up my shift mount. :)
@SIMRIG4127 ай бұрын
@@bobradarI get it mine is also that way. But some people like them even
@SIMRIG4127 ай бұрын
@@SleepyPantsSimRacingyes I know they’re ways to fix it up. But some people will have to buy extra brackets and bolt/T nut and profile. I have extras of that stuff but some people have barely minimum. So may not work for everyone. I do like it though and very nice.
@SleepyPantsSimRacing7 ай бұрын
@SIMRIG412 understandable, yes this will likely work for most users but if they don't have the adjustability, it might be better to get a V3 or other taller shifter.
@Plutoman097 ай бұрын
So. The ancient question would apply here. "It's a little bit shorter I think" Does size really matter ??🧐😵💫
@SleepyPantsSimRacing7 ай бұрын
In this case, I would say size definitely DOES matter, if mounting options are strict, this would be a perfect solution. While it doesn't have as much available resistance as the V2 or upcoming V3, it has just enough and it feels unique and satisfying still. I was going into this unit expecting it to have far less resistance than it has so it was a pleasant surprise. It feels similar to the Simagic Q1s in a lot of ways, as I said in the video, it feels mechanical in some ways even though it is a magnetic shifter. Coolest thing about that is no springs to wear out! Same feeling shift every time!
@DouglasThompson7 ай бұрын
Could you sneak it in your pocket to work as a fidget toy?
@SleepyPantsSimRacing7 ай бұрын
Yes, possibly. Especially if you wear jnco jeans. Or Lee pipes...
@DouglasThompson7 ай бұрын
@SleepyPantsSimRacing Good to know...can I use it to show my partner that I am in fact "BIG"?
@SleepyPantsSimRacing7 ай бұрын
@@DouglasThompsonOh yes, this Stubby will let you impress anyone you are around, male or female!
@oktanedesigns7 ай бұрын
@@SleepyPantsSimRacing missed opportunity on the outro... STUBscrub
@SleepyPantsSimRacing7 ай бұрын
@@oktanedesignslol
@grafire807 ай бұрын
nice. But now, in your vids we cant see no more the big "Mic" in middle front 😅 HAVE FUN und peace
@SleepyPantsSimRacing7 ай бұрын
Lol, I raised it up so i would be able to practice for the upcoming American Idol.
@alles_Freaks7 ай бұрын
Maybe fanatec could license the Design 😅
@SleepyPantsSimRacing7 ай бұрын
I thought about that lol
@oktanedesigns7 ай бұрын
Maybe I should have named it the "Magnatec" sequential
@SleepyPantsSimRacing7 ай бұрын
@@oktanedesigns that's great!
@MedicP2517 ай бұрын
If you say it's good, it's good, how much? Website says $0.00, and it's Sold Out!
@SleepyPantsSimRacing7 ай бұрын
This is a prerelease product, it should be out soon, no solid price yet but its looking like a reasonable price.
@oktanedesigns7 ай бұрын
Now taking pre-orders. $259 is the base price.
@dirtinthebox327 ай бұрын
How cute…..
@SleepyPantsSimRacing7 ай бұрын
Hey dirt! You get my messages? :)
@dirtinthebox327 ай бұрын
@@SleepyPantsSimRacing yes but I’m so backlogged. Started a new company with day job so it’s been hectic. Been seeing all of them! Keep me included with all man!
@SleepyPantsSimRacing7 ай бұрын
@dirtinthebox32 sounds good, glad to hear you are busy! That's a good thing
@Countrymusicnumber17 ай бұрын
How does this compare to the Aiologs sequential shifter?
@SleepyPantsSimRacing7 ай бұрын
This feels better but if you already have an aiologs I would say that's already a pretty decent sequential unless you are looking for a more pronounced shift feel.
@Countrymusicnumber17 ай бұрын
@@SleepyPantsSimRacing Thanks! I might get the Oktane then. Do you know if it's possible to adjust the tension on the shifter?
@oktanedesigns7 ай бұрын
@@Countrymusicnumber1 There is no tension or throw distance adjustment on this shifter. It breaks at about 8 lbs (measured from halfway up the knob)
@captainhec80737 ай бұрын
Can we extend the shifter if need be?
@SleepyPantsSimRacing7 ай бұрын
As in make the knob taller? You could but it would lessen the sensation.
@oktanedesigns7 ай бұрын
Extending the lever would negatively impact the performance of this shifter. If you need it to be taller, I'd recommend getting a riser, or side mounting it on a piece of profile at the desired height.
@SleepyPantsSimRacing7 ай бұрын
@@oktanedesigns that's what I have done, that's why aluminum extrusion is king. So adjustable.
@atechcheck5 ай бұрын
300€ for + and - buttons and few metal plates..... man we buy anything and praise everything without any commonsense LOL
@SleepyPantsSimRacing5 ай бұрын
You could look at it like that, or you could think of it asa super compact, super solid, awesome feeling sequential that fanatec has yet to make. ;)
@atechcheck5 ай бұрын
@@SleepyPantsSimRacing dont get me wront it looks great! Its just that cost to price ratio for all those shifters and handbrakes is just crazy :D would buy it if it is up to 150€ since lets be honest for 300 you can get DD base with wheel xD
@SleepyPantsSimRacing5 ай бұрын
@atechcheck i feel you. It seems pricey for how simple of a device it is, but there is a pretty awesome magnetic system inside that is unique to oktane. He is great at maximizing mechanical feel in a tiny package. This is definitely not an entry-level priced item, and you could get more value out of other pieces of gear potentially, but this is an item you would purchase after you are already well set up. For instance, I own 2 shifters that are more expensive than most my other gear, I own a bdh shifter which I paid 1.3k for and a bash that I paid around 1.1k for. I could purchase a whole rig almost for those prices but those items I would never buy before I was well setup with the rest of my gear. I will say that the V3 sequential is more practical but the mini is more intended for small spaces.