Fanatec Podium Racing Wheel F1 REVIEW

[@FaithHopeLove77]

I bought the Podium F1 upgrading from the CSL Elite. I didn't need more force feedback but I wanted more feel and faster force feedback. The CSL elite now feels jerky and slow to react since the belt has to switch directions. This uses magnetism which is super fast smooth response. The Podium is 100% worth the price. I am selling my CSL elite to lower the price. Podium Rocks!

[@RoarS89]

For the QD mount, just unlock the locking ring completely, and add a bit of lube to the threads, as well as a little dab of lube to the rubber locking ring, as it will become much easier to swap wheels. You'll also avoid the threads to get ceased (as some have struggled with), and it the lube will let the QD mount slide over the rubber like nothing, and you'll avoid smacking your face in with the wheel. Regular bottom mount works fine, but side mounts are superior, that's for sure! Not sure if the Fanatec side mounts are worth it, but Sim-Lab provides a pretty nice alternative, for roughly 1/4th of the price Fanatec is charging. And they have sidemount options for both the P1, and the GT1 EVO (same price for both options). The need for only 1 USB from the wheelbase to the PC, to run the wheelbase and all the needed peripherals, is a godsend! As far as i know, there's no other DD option out there, that does this. They've pretty much nailed it for me, the tuning is convinient, and easily accessible from the wheel itself, no need to have a software running in the backround to make adjustments, no need to restart the simulators/games to have the adjustments take effect etc. The only thing remaining now, is to have a official full released version of the Fanatec tuning software! 10/10, would sell my kindey again.

[@Mikey6048]

Did the same thing. Put Dielectric Grease on the rubber and threads. Fixed the problem.

[@Mikey6048]

@@marble25 The ring in the back pushes the rubber inwards. Making it swell inside wheel. I've ran my DD2 hard, and it has yet to come loose. Adding a small ammount of grease is not a problem.

[@RoarS89]

@@marble25 It's not like you have to drench it in grease anyways.. I used a tiny bit of teflon spray on the threads, and just some regular lube that doesn't harm rubber, just to make it slide on and off a bit easier. And yes, the rubber ring is forced to expand inside the QD mount, to remove play between the mount and the wheel itself.

[@jefflangdon3540]

Thanks for the feedback. I’m new to sim racing, I’ll probably take this route.

[@mrp32gtr]

Open the tension screw behind the quick release before taking of the wheel!

[@imJGott]

i was thinking the same thing and i dont even have the setup

[@henrik1743]

The things you don't care to learn when you receive the product for free.. lol

[@williamfullerton8105]

Got my DD1 earlier this week.... I'm blown away and got my first podium finish on iRacing in part because of this wheel! I love it

[@pleo9215]

Highly questionable review for 3 reasons: 1. No "Honest review" in the title 2. Not using the phrase "at basic level..." 3. No tea drinking during the review

[@GamerMuscleVideos]

Need more tea !

[@CaseTheCorvetteMan]

GamerMuscleVideos now if you give a review on tea, thatll be one ill trust!!

[@TK421-53]

Fanatec has beautiful hardware, but bottom line it is cost that stops me from looking that way or any direct drive systems. I find myself sticking to the higher end TM gear - happy with my update to TS PC Racer, T3PA pro, TH8A and Sparco Mod handbrake plus a couple of wheels. Not nearly as nice, but the whole setup cost me a lot less than just the basic Podium set without extras. But if money were no object I'd picked up the Fanatec set for sure. Have fun.

[@aslatabistaalphonso4250]

I'm poor just watching this review 🥺🥺

[@CaseTheCorvetteMan]

TK 421 stick with the Thrustmaster, its better built and lasts longer. I cant see my Fanatec stuff lasting near as long, because it is nowhere near as good in terms of quality as it looks.

[@johncleave]

Give the Fanatec CSL Elite pedals with the load cell kit a look. It's not too pricey and felt like an enourmous upgrade over the T3PA (not pro) for me.

[@TK421-53]

John Cleave well something I did not mention is that I don’t want to order Fanatec from Germany. So it is cost, satisfaction with my current TM gear - including the pro peddles with conical brake conical - AND availability. I can appreciate good gear, but for now it is a done deal and I am not looking at replacing anything.

[@frazzefraz]

I have had the Logitech G29 and now I have two rigs. A Playseat Evo rig with TM T300RS GT (good wheelbase, steering wheel is ok), t3pa pro (lousy quality and do not recommend these pedals at all) and my SimLab rig. I have CSL Elite, Clubsport v3 pedal with Sparco pedal, TM Sparco handbrake (use it only as seq.), Fanatec handbrake and TM TH8RS (soon I have Fanatec shifter). My opinion is that Fanatec is in a higher class than Logitech and Thrustmaster.

[@MySimRacer]

I still have a lot of the sim racing ladder to climb to justify such a wheel, but this has got the bet the dream end goal. Would love to setup a public racing place with a suite of motion rigs, these wheels and vr where people can arrive and drive or where we could run competitions. Similar to a go kart track but indoors for all weathers.

[@02semiata]

Ended up going with the simucube2 pro. I think I made the right choice. Community and software updates will be a lot better with GD then fanatec

[@GamerMuscleVideos]

I think both wheels have there own market , Simucube for people with custom wheels and other kit and Fanatec for people that like the Fanatec rims and kit / want cross compatability. All the DD wheels on the market are great quality now and infinitely better than what it used to be like only 5 years ago.

[@02semiata]

@@GamerMuscleVideos You should have a look at the review Barry posted of the dd2. This wheel does not look very good compared to other DD wheels. :(

[@yungdadi]

From my little time trying out the podium wheelbases I feel they are just more powerful versions of the clubsport v2.5 while the simucube 2 felt like it added another level improvements on the ffb.

[@gbessette40]

I own both (CSW v2.5 and the DD1), the DD1 does not just feel like a more powerful v2.5. The fidelity is way higher, not even in the same league. Don't get me wrong the CSW v2.5 is the best belt drive wheel to date, it is just not a DD. It does not have the strength, speed or fidelity. Sim racing since 1998 (GPL), I have had many FFB wheels, Logitech Wingman Formula Force, DFP, G25, Thrustmaster TX, CSW v2.5 and now the DD1, so I feel I can speak to this with some authority when assessing belt and gear drive wheels. I cannot speak to the simucube 2, I am sure it is awesome as all the reviews of the original are great (small or large Mig/other motor). yungdadi, where did you try all these wheels (CSW v2.5, DD1 and simucube 2) to gain this conclusion? How long? What sims? No disrespect, statement seems pretty casual, still, I find it inaccurate.

[@yungdadi]

@@gbessette40 I tried a friend's DD2 wheel in Bristol and the only thing I felt is what I mentioned earlier. I also tried the the dd1 which was later replaced with a simucube 2 pro by a friend in new York and I will take simucube over it anyday because I immediately noticed a richer ffb. Maybe my shot time with it is not enough by you but I know what I felt and nothing has changed my opinion

[@MrSrimera]

Wait for the dedicated Fanatec software to be be released, might be a better comparison then.

[@yungdadi]

MrSrimera sure I will even thought going by the delays fanatec may not release the software or podium accessories for another year I guess

[@gbessette40]

@@yungdadi ​Well you are entitled to your opinion. Like I said, I cannot speak to the Simucube line of DD wheels but the DD1 is not "just a more powerful version of the CSW v2.5" as much of a compliment that might be to the 2.5. To each their own = )

[@ingobordewick6480]

Mine comes next week. Can't wait for it!

[@Alextraz]

As a console player i am happy to see the first DD wheel for ps4! I hope that there will be more competition in that nish and hopefully the price will decrease. Are all buttons functional on PS4? Is there information if this wheel will be compitable with ps5?

[@GamerMuscleVideos]

All buttons work on PS4 so long as the game supports them. No info on ps5 support yet.

[@barrymcaully]

Do they all work in PC2?

[@ccramit]

The extra top two paddles on the APM don't work though. All the other knobs and switches work.

[@Mersty.]

Can you do a separate review for the included USB please.

[@johnnycage3673]

Ok GM, I'm buying a Mad Catz wheel now.

[@unbelievablegreatness9792]

That's my boi

[@slatanek]

Fanatec is the Apple of simracing - they lock you up in their ecosystem and your f***ed for life. But seriously it's reassuring and convenient that my soon to be CSL Elite F1 rim will happily run on the Podium base in the future. Concerning longevity I'm currently still rocking the Fanatec GT3RS V2 and it's the seventh year of abuse and it's still going and all the buttons work. I'm actually amazed by that. Thanks for the review.

[@eirikol1]

slatan slatanek that was my first wheel! Died 6 months ago, and i went for the clubsport V2.5 and v3 pedals, with the formula carbon rim, so incredibly happy with it!

[@slatanek]

eirikol1 I just got my CSL Elite with F1 rim a gew days ago - very pleased with it. The GT3RS was very slow by comparison. At last I can catch slides I always thought I should be able to catch but never was due to the friction of the old wheel.

[@eirikol1]

@@slatanek yeah! My new favorite car is the 488 GT3, which were near impossible to drive with the Porsche wheel! Currently waiting for the podium quick release so I can do some vintage/rally stuff with a round rim.

[@slatanek]

eirikol1 good to hear. Good luck man!

[@tHoM0r]

well if you say its pretty much a small mige with more natural damping, then it can't be so bad. I'll wait to see what Barry says before deciding. SC2 seems to require much more extra rig work for me unfortunately, whereas the fanatec will bolt right on.

[@BLITZKRIEG1]

I'm thinking of getting this. I have a call elite. How much longer is it including the wheel in place? Does it feel you're too far away from the screen? cheers

[@roverboy1687]

Going from 6 USBs to 1 would be convenient.

[@Mikey6048]

It's very convenient. One of the most overlooked features people miss when pimping OSW and other DD Systems.

[@SuperPITSteelers]

Yes it indeed is. I have I think 9, maybe 10 usb ports on my PC, and still had to buy a few USB hubs BEFORE I bought my Podium F1 wheel. Such a relief to only have outgoing USB

[@MarkDavidBlack]

Just sold my CSW V2.5. Ordering this in 3 days!

[@PandorusFightStick]

None of my cables are loose like that at all on my dd2, especially the power cable like yours !! Struggle to get it out!! Add a small bit of lithium grease on the shaft, had a bit which came with my v3s and works a treat putting time on off

[@1027hristo]

You should not use the grease from the Brake Performance Kit - this is Lithium Grease and is not suitable for the rubber sleeve. Fanatec recommend silicone grease.

[@Mikey6048]

If able, use dielectric grease. It's electrically inert. And doesn't solidify into paste.

[@PandorusFightStick]

Cool, I will try some

[@SladeRenegade]

What about the side to side play in the quick release? Watch The Sim Garage review of this wheel...

[@untitledproductionMI]

I second this.

[@lurcho101]

He's the only reviewer to mention this and it's because he bought it

[@SladeRenegade]

@@lurcho101 right, so it's the only review worth watching. I love the hype around the product and I myself would purchase one, however for $2000 CAD, I expect a little better. Especially from Fanatec. I still use my Porsche 911 turbo s wheel and csl elite pedals and they work flawlessly. Lol. I'll wait for version 2 with an updated qrl. Simucube looks like a good alternative however....

[@mariosloizides5331]

Happy new year I have the PlayStation five and I got the DF one but now with the Gran Turismo which wheels can I use on my dd? Thank you for your time

[@ChapuzasconRober]

Thank you for the video. I am thinking about jump to DD in the future and it has been useful. Hope one day can do that. And of course I will use your link. Best regards.

[@Mw3warriorConn1]

m currently stuck between buying csl elite f1 or the dd1 for ps4..i mainly play f1 but will be progressing to other racing games..im thinking of homding out for ps5 before buying dd1..any opinions thanks

[@Zero.X]

Choose the CSL elite + for the start. Can explain you why Easyer handling because less FFB, Lower price and you can possibly sell it faster because a DD wheel is highprised. And until no ps5 combatibility is confirmed its possibly a good choise for the start. Pro for the DD1? Its a DD wheel that meams you have more FFBs and and and, you have a base combatible for all racing games in the past and future, a long live setup for the next 5-10+ years in the DD class.

[@RaceFanatic7]

Very happy with my DD1 - even happier for the fact that I originally payed 971€ and then got a 350€ voucher because of the delay, bought a rim I would've bought anyway. So could say I payed 621€ for the base, so almost HALF PRICE of what it is now! :D

[@tmck6490]

Great review! I'm thinking about getting a dd1, just wondering. Do they use lots of electricity?

[@ianbradley2153]

Very good vid,I'm looking at getting in to sim racing and I'm loving the lokk of this,quick question,how do you install the drivers if you dont have a PC? I know you dont strictly have to but me being me I'd want to!!

[@HardwareAddiction]

Which cockpit are you using now? the previous one couldn't take the forces obviously.

[@sheldongayle6780]

So im looking to get the podium dd1. But do i need a rig for it or could i mount it on table top clamp v2 or anything else?

[@vman7683]

Good reviews James. Can we get some ffb settings guide for each sim. That would be interesting and informative 👍

[@GamerMuscleVideos]

Yep I have a few things I want to cover :) thanks for kind words as well !

[@MUCracing]

@@GamerMuscleVideos +1.. I have one from the first batch and still dont feel its setup correctly after countless hrs of fetteling. (nearly brought a mad cat.) Pls make it more than just going thru the menu or recomended settings from fanatec as i feel they are lacking.. Cheers..

[@RTAMOTORSPORTS]

One day I need to try one of those! Gorgeous wheel and base

[@B_stu]

"If I grease up my shaft, I can pull it off much easier". "That's great Mr Muscle, but are you going to pay for those tea bags now?" Said the Lidl shopgirl, nervously.

[@matthewsurabian3410]

Question; I'm an Xbox user primarily. And i think it is wonderful that there a wheel for the Playstation. But i would like to know what an additional "rim" is. Because i am interested in purchasing this product even if i have to purchase an additional rim. But i have no idea what that is.

[@GamerMuscleVideos]

If you go on the website and chose wheels from the options you can filter by compatablity and then choose Xbox one all those will then make it work with xboxone fanatec.com/?FAP+Banner&GAMERMUSCLE&General+Links&a_aid=GAMERMUSCLE Most of the Xbox wheels also have the Xbox logo on them as well 👍

[@Hattori_GT]

Great review. Can you use a round wheel from fanatec and still works with ps4?

[@zetetick395]

This is the kind of product that seems painfully expensive, but if you know you're gonna be using it regularly during the week for over the next 5 to 10 years it's actually really not such a bad proposition at all It's one of those outlays that hurt at the time, but you're always glad you did while using it some months / years later.........Just keep it's price on the DL from the missus ;)

[@mobilesecure]

Hi! Thank for a great review. I have Csl Elite at the moment, is it worth to upgrade for this Podium racing wheel f1? Thanks

[@GamerMuscleVideos]

Yah DD wheels are a big upgrade from and belt driven wheel 👌. CSLE is still really good though so only upgrade if money is not an issue 😅

[@codyzempel5506]

Okay need some advice or opinions and any and all will be greatly appreciated..I have a CSL DD GT PRO and have been thinking about upgrading to the F1 podium as I race on both PC and PS so that's my only option within Fanatec, so I guess would it be a huge improvement over my CSL GT Pro or really not that of a difference? Asking before I hit that buy now and my bank account goes wth you doing

[@Leynad778]

After 4 years of Accuforce I thought to give one of the new DD's a go anytime soon, so I tested the DD1 and Simucube 2 both twice at the Expo. Long story short: the Accuforce might have another four years until SimXperience releases a new wheelbase.

[@2Old4Forza]

So you are saying accuforce > podium simucube?

[@fastfolky]

2Old4Forza I don’t think so, but the difference between DD is not very big and if it still works why get something else?

[@Leynad778]

@@2Old4Forza Yes, the FFB was IMO not even close to the Accuforce with my Sim Commander settings. Not just the missing engine- and road-vibrations from the telemetry made the others too lifeless. The dampening feels more natural with the AF and much better car & tire connection in four different Sims. It's likely Sim Commander which makes the big difference here and they and I had four years time to tweak the settings, but the most important are not available with any other wheel anyway. I'm just trying my AF without Simvibe and motion if my impression was just coming from the other devices, but no, my FFB is better at least for me and by a landslide. I could order the S2 and Fanatec DD tomorrow if i want, but that's not going to happen.

[@wildturkeyuk3005]

So does this wheel offer full analog gas and brake using just your hands? I'm disabled and my legs are deader than dead. So many wheels out there but none offer hand controls for disabled folk. Any chance of doing a demonstration video with this wheel using the paddles as gas and brake? Thanks for reading this. Cheers...

[@GamerMuscleVideos]

Yah the podium F1 wheel rim has two analog inputs that you could map to gas and brake. You have two shift buttons and 1 analog on each side basically.

[@mh7711]

What about the Difference between the Logitech G29 and this Wheel? Much difference?

[@VMVarga-yf6eg]

I went for the DD2 because of the 5 year warranty and the customer support for fanatec in Australia. If you know you are going to use the thing for many years to come the premium price is worth every cent

[@GamerMuscleVideos]

Here is our affiliate link if you want to support me 👍 fanatec.com/?FAP+Banner&GAMERMUSCLE&General+Links&a_aid=GAMERMUSCLE

[@CaseTheCorvetteMan]

GamerMuscleVideos i own the same DD1 set and use it on PC, and its not bad by any means apart from the usual Fanatec terrible quality control, disgraceful security, and virtually non-existent customer support, but i do find it rather hard to take these sort of videos as "unbiased reviews" from the likes of yourself and particularly Sim racing girl, due in large to the fact getting such an expensive item essentially free is an instant bias, youre going to be a lot more critical of an item you had to actually pay for and especially if it is £1600. I do enjoy your videos though, some are quite funny to watch :)

[@slatanek]

redSKORPION50 I view it this way: if a reviewer says: "disclaimer: I got item X for free" it basically translates in my head to: " look out I'm gonna be slightly biased. I'm not gonna lie when there's a serious issue but I might unintentionally let something slide". That's human nature 101. Unless you're Barry Rowlands - then you're gonna take the sucker apart no matter who send you what. God bless the man!

[@CaseTheCorvetteMan]

slatan slatanek couldnt agree more really, Baz is a top fella, and i do trust his reviews and his knowledge. The man knows sim racing. Some youtuber sim racers i watch their videos and just shake my head at times... This isnt one of them, but when i watch one that says "im 44 seconds down but im 15th in the world..." Ummmm really?? I was 17 seconds down on the same stage and 362nd in the world... You gotta wonder...

[@payman.amini1]

@@slatanek Barry did it too with Fanatec DD, unfortunately.

[@herrlogan17]

I watch this video with my G25 on my desk, which cost me 150 bucks, playing Gt sport through Cronusmax plus :) One question though, I see on video some input lag while playing Gt sport. Is it correct?

[@guybuurmans1984]

I noticed it as well, I hope that can be adjusted so it matches the movement of the wheel in game.

[@lebojay]

5:10 what’s with the latency between steering wheel inputs and the reaction on screen?

[@jijingebob]

It's just animation lag

[@carltonsmall682]

So the PS4 version has slightly less Torque. Is it enough to buy the pc version and then get a converter? I play on both PC and PS4

[@seanp7277]

Did you try it with the PS4 and what’s it like? Thanks

[@vik3877]

Thankyou for you time and review mate

[@GamerMuscleVideos]

Thanks for the comment and being nice !

[@swiftangel88]

Price seem to have gone up, now selling for EUR1,799.95 at their website

[@counterdebate]

He's ALIVE!!!😀 had me worried there baldie😓

[@misterdog7]

Skull all polished and ready to rock.

[@erwinlommer197]

He has spent the last two weeks trying to go the wheel to work in ps4 (it was a cable issue)..

[@theotherone5214]

Mr Muscle works as a cashier at Lidl now, so he doesn't have a lot of time to make videos and stream.

[@counterdebate]

@@theotherone5214 ah, I see...so your saying...he has got his dream job!!! May aswell uninstall KZbin then😭

[@unbelievablegreatness9792]

He died, its his clone

[@naasirmahomed]

Hi,I would like to know if I can mount this on a table considering the fact that the cockpit is only coming later

[@Matias_sebastian]

Is the power cable compatible with the US plug outlet? I think we use Plug B here in the states

[@electricalmumu9646]

That wink near the end kind of hypnotized me and made me click the fap link without realizing it. You're playing with fire here.

[@uklmngubane5661]

This is the best review by far: Fanatec; you have a winner with this MAn: nice

[@channelvr1293]

Ok just finished my video review of the podium DD1 ......might as well bin it now...LOL exact the same video except for a cuter actor in the visor... gonna have to review my own review...LOL good job GM i hope you get to keep that piece of kit....i bought it and i LOVE IT !! 😜👍😍😍😍

[@GamerMuscleVideos]

Sorry ! Still be good to have your review , multiple people saying the same thing by accident adds more credablity to claims good or bad :)

[@Greywolf40BD]

Yeah, GM I'm going to get rid of my DD1 wheel and get a madcatz. I'm arosed now...not really! Excited for PS4 people. I'm a PC guy forever.

[@GamerMuscleVideos]

I think ps5 might be really interesting but yah it's a shame we have yet to see a SIM on console that's in the same quality level as RF2 iRacing and AC ( AC on console is nowhere near as good as pc AC) #pcmasterrace 🙃

[@jamesbutler606]

I think it's a shame the CSL Elite won't work with the Clubsport V2 pedals plugged into the wheel...i've run out of USB ports and have to do a dance to plug stuff in!

[@GamerMuscleVideos]

They should work , hit up Fanatec support , you might just have a faulty cable or something 😀

[@helluminati]

Do you connect it to both the ps4 and pc at the same time, when you update first time?

[@reviewforthetube6485]

If you would loosen up the brass lock ring you would egt it on easier like others because you having it already tight is expanding the ring undo it the ring shrinks so you can slide it on yes its still a little heavy but not as bad as yours seemed but better to be tight then loose but dude I loved this video you were very very in depth loved it I cant wait to get one in like 6 months from now hahahaha

[@pandabar5736]

hey men , greetings vienna part 2 ( meet you on the Sim EXpo :-)

[@GamerMuscleVideos]

Ha hello !

[@BLITZKRIEG1]

what doesn't add a ton to the immersion is the length of the unit. Would completely destroy the FOV immersion having it so far from the screen.

[@SimRacingVeteran]

Back off that locking ring all the way when taking the wheel off. I have no issues taking my wheel on and off. Expensive unit but this is a game changer. In Canada this will end up costing 2,720 dollars. After the US dollar conversion, shipping costs and duty fees.

[@fcolon1976]

What's the difference between this wheel and the ClubSport Steering Wheel Formula V2 USA wheel ?? Thanks

[@mrp32gtr]

The color and the V2 wheel is closed in the bottom. The V2 wheel works with xbox one and comes with xbox buttons that you can take of. Worth kbowing tho is that alot of the functions is bot supported on the xbox. The led shiftlight and the thumb wheels for example.

[@essa28_fsr]

Might be a stupid question but how does the FFB compare when playing say Project cars 2 on both PC and Console??? What I mean is, is there a noticeable difference between systems???

[@DomB_Fanatec]

Multi-platform games typically operate at an overall lower latency when using a decent PC compared to console versions. This means that FFB can feel significantly sharper/tighter on PC.

[@SuperPITSteelers]

Umm you're using the quick release wrong. You have to unscrew the gold thing on the base completely and make sure you're fully pulling back the blue release on the rim. Then you can screw it back into contact with the rubber ring. Also, how did you get the oled screen and shifter lights working with Assetto Corsa? Mine only works "fully" with F1 2019 and partially with iRacing.

[@DomB_Fanatec]

I didn't really see GM use the QR incorrectly in this video. You only need to loosen the gold locking nut to the point where the rubber sleeve is no longer being compressed. It's not necessary to unscrew the locking ring all the way back each time - if you go too far back it can create some 'stiction' against the black clamp ring.

[@SuperPITSteelers]

@@DomB_Fanatec then let me rephrase: the way he is operating it is not the most effective way of operating the quick release, or so I have found with my product

[@SuperPITSteelers]

@@DomB_Fanatec also, Dom, while you're here, I do have a question. When will the Fanalab software be released to the general public? I am having a hard time finding any information online regarding this and while my experience with the podium base has been great, it hasn't quite been "complete" since some of the features, such as the shift LEDs and screen, don't work in all games

[@momorious]

@@SuperPITSteelers FanaLab is coming soon. For leds in older games you need to use the CSW v2.5 compatibility mode.

[@lenny2137]

Where’s he been 🤷🏻‍♂️ GM at the Sim Expo getting more Fanatec wheel rims 😂

[@GamerMuscleVideos]

Lol the new Porsche rim looks nice , I'm happy with just formula rim and oval rim to be honest 🙃 I allways liked there BMW rim as well.

[@MrTheSmokinman]

If you buy this and run it under 50% you're pretty much throwing your money away. If you run it at 40% (8nm) you would just be better off buying a Fanatec Clubsport v2.5 for a 3rd of the price, maybe even cheaper on Ebay because it can do 8nm max. And if you run it at 30% (6nm) then you could have gotten a Fanatec CSL elite for like $300 and just run it on max settings (6nm). The point is DD wheels are more for simulation and would probably benefit someone who's training to be honest. If you like to race for hours on end without having your arms feel like jelly or like they're about to fall off in 15 minutes and actually enjoy the game just get the Fanatec Clubsport v2.5. It's all the power you'll need for gaming and it has great FFB and is also smooth and quiet.

[@milesonewheelwinter]

Do u not understand duty cycle? Its more then just power. Speed =realism. You are clueless

[@Bierce88]

I was beginning to think you got lost on your kayak or something lol.

[@jimrussell9757]

Hah! With VR I always have the right rim with my podium.

[@tokenride04]

Still using my Clubsport v1 with no issues but considering a DD

[@MazdaChris]

The way you say "braided sheath" sends shivers down my spine...

[@aracon9721]

Fanatec says you can use the "FEI" setting on your wheel to reduce these noises 4:17

[@GamerMuscleVideos]

Lol the rattling noise was my keyboard moving , i Need to tighten down the bolts on my rig a bit more :) I found with the fanatec DD the FEI setting is best put to around 90 and I just use it to remove some of the higher frequency FFB effects you get in some games.

[@aracon9721]

I was referring to the woohoohooooos and such 😉

[@Mikey6048]

Already broken my DD2..... Have to send it in for repair. :( Stripped a front face screw hole using my Asher Racing Rally Paddle Shifter.

[@GamerMuscleVideos]

That sucks did you over tighten them or was it some other issue ?

[@1986alexpotter]

Mine died last week, power buttons and killswitch failed. Having to send it off to get repaired.

[@Mr_Latte_UK]

With the new upcoming wheel adapter to enable other wheel rims and with the upcoming software, can you confirm something no review seems to cover. Can PS4 & Xbox be played with PC USB based pedals? Or does compatibility for these require "Fanatec Pedals" to be installed. If so, this is a major drawback of the PS4 Wheelbase for PC sim racers that use the popular and high-end pedals. If needing to change pedals and then the need to still purchase Fanatec pedals defeats the purpose of multiformat compatibility between PS4 and PC titles.

[@momorious]

You can always use 3rd party Pedals when connected to the pc by USB of course. No problem at all, you just only can connect Fanatec Pedals to the Fanatec base, of course. However, therefore it's not possible to use 3rd party Pedals on console, that's a Fanatec exclusive right in the DD world.

[@ruptured1701]

The reason the wheel was so hard to pull on and off was because you had the gold ring as tight as it goes if you loosen the gold wheel its much easier to take off.

[@GamerMuscleVideos]

No it's still hard to pull on and off even with silicone lubricant it can sometimes take be a bit stiff.

[@lachieplays8002]

Hello there how are you doing, im currently saving up for a fanatec dd, yours looks like fun.

[@GamerMuscleVideos]

I'm really enjoying it ! I love all the DD wheels hopefully you can get one for a good price and you enjoy it as much as me 😁

[@steveplakhin1139]

does this work for ps4? f1 2021? getting a ps5 in a few months

[@AbideinChristFully]

Sweet wheel! Did you get to keep it? I saw it in your new vid...which led me to watch this.

[@daren42]

A really good, well made review video. 5 stars. I would have liked to see it working on a PS4 though, perhaps that's to come?

[@gamingxprox124]

On the website it says Xbox One ready and I own an Xbox one. So, would I be able to use it full on Xbox one ?

[@nikhilrw]

Dude, I lost it at 02:47 ROFL

[@TinoushGTR]

Damn thing is so expensive that in every video I see they have it for free or they don't. Really love to get one but damn. Gonna go with clubsport wheel and pedals.

[@kevinharkness2108]

Its too expensive. I would also need the fanatec gearbox. By the time you throw in clubsport pedals, your getting close to €3000 here in the uk on amazon!

[@TinoushGTR]

@@kevinharkness2108 I ended up buying the clubsport family. Around €1100. Csw2.5 with Porsche 918 wheel and cs v3 pedals. €90 for drivehub and now it works great with PC and PS4.

[@TinoushGTR]

I had a th8a shifter and I use it with PS4 and PC now

[@Tyborg425]

But I would like to buy this base with an Xbox wheel...... where is this option

[@derekbird8958]

Vibration motor seems very weak compared to accuforce.. Cant get anywhere near the feel of road texture, kerbs and bumps on DD1 compared to the accuforce

[@momorious]

The motor actually is a lot stronger, not weaker. AF oversaturates those FFB effects when adjusted wrong.

[@GamerMuscleVideos]

It does not have a "vibration motor" it's a DD , there is a seperate vibration motor in some of the Fanatec wheel rims though.

[@derekbird8958]

Then it would be nice to be able to oversaturate it on the DD1 to be able to adjust it to a preference i like. I know some people don't like any vibration of kerbs or bumps and just want the turning forces, I like to feel the bumps it helps with immersion.

[@derekbird8958]

@@GamerMuscleVideos My mistake. The force feed back is strong but however it generates the bumps and kerbs they feel weak to me.

[@momorious]

@@derekbird8958 they feel like the game intends them to feel. If you want to oversaturate it on a Fanatec wheel you can increase the force from 100 to 120 which bumps up the bumps and kerbs, but other than that if the game has no option to increase those effects you can't do it on a proper DD like the Fanatec one.

[@NickG40]

The "carbon cover" actually does serve a purpose as it's what everything is mounted to.

[@MacAudio74]

Nick Gregory It could have been Alumnium. He meant carbon may be a tad over kill.

[@ludacrisleon828]

After seeing the dd2 review by sim racing garage I wonder how the flex was with this one. Kinda hoping there isnt any and its just Barry being Barry

[@GamerMuscleVideos]

Its not really "flex" its play if you push on edges of the wheel , I never really noticed it myself it takes quite a bit of force on mine to move.

[@ludacrisleon828]

@@GamerMuscleVideos Thanks, that is what Ive been reading from some other users too and what I hoped for since you mentioned the fidelity which would be affected with a lot of flex. Now I have to convince my wife I really need this 1600 euro wheel and some pedals 😂. Thank you for the awesome review

[@808GT]

Are there any other options to run a DD on a PS4? Gran Turismo Sport, in particular?

[@momorious]

No other option.

[@808GT]

@@momorious Thanks. Thats a shame because I just cant justify that much money for a DD.

[@Mw3warriorConn1]

Im currently stuck between buying csl elite f1 or the dd1 for ps4..i mainly play f1 but will be progressing to other racing games..im thinking of homding out for ps5 before buying dd1..any opinions thanks

[@Zero.X]

@@Mw3warriorConn1 For the start stay at the CSL because the DD1 is higher prised and much stronger FFB. I would do that too.

[@1zingero]

Works with all games except project cars( the first one) anyone know how I can get the wheel to be recognised?

[@maxshand]

First of all love the videos...I am thinking of buying a csl elite setup for my business rig, has anyone got a discount voucher. I missed black Friday and Monday due to operation in hospital

[@erwinlommer197]

HOW DID HE GET THE USB IN ON THE FIRST TRY?!

[@zaneislandd4650]

Usb logo up (logo in the cable) as USB specification states. If mfg is smart it always goes at that direction. You can check it in your hand before plugging and should always be correct

[@erwinlommer197]

@@zaneislandd4650 Witchcraft, burn this man!

[@milkman100001]

put a little smearing of silicone lubricant on the shaft and the wheel will pop off and on with no issues

[@LeeFall]

Nice camera work!

[@AjwinF1]

Can you use the csl elite base ps4 with the wheel in this video?

[@GamerMuscleVideos]

Yah IV used it with GTsport ,. PS4 compatablity comes from the base not the rim so I think you can use all wheels on PS4 👍 so long as you have CSLE PS4. Or podium with PS4 support

[@reviewforthetube6485]

There keeping the quick release the wya it is but there starting to make pads fornthe front of the wheel so you have some safety if you hit yourself in the damn face haha and yes believe it or not it happens to alot of people but I would rather it be that tight I feel much better about it fitting that way I'm not one that gets upset about little things at all that wheel is so quality it's crazy there wheels to me at this kind of quality and there price is outdtanding and I dont mind the fanatec logo but for me I'm perfectly happy with my tmx pro for now I love it and at least its force feedback and is pretty darn good with performance I do want some new pedals def want some new pedals but these are better then the other thrustmaster pedals it's like you were so worried about being positive like your worried about people saying your bais or something and that's not the case dude if you like it day it be positive dont feel bad about being positive I can tell you love it but had to put negatives in it and it was a great review

[@christopherbudden1652]

Great vid, please keep it up!

[@OhItsThat]

Would you trade your OSW for this wheel?

[@GamerMuscleVideos]

I'm happy with both , I'd use this Fanatec DD more than the OSW mostly because of the QR system quick access to FFB settings on wheel and the wheel rims / QR.

[@aky19832001]

$1,799.95 *. Not including mounts. That's 2k for a wheel man! You can buy a 3DOF motion sim for a few hundred bucks more. They are other wheels that are realistically cheaper. By $1000 easy.

[@steviemac2475]

Does the pedals come with the steering wheel

[@GamerMuscleVideos]

Not with this one

[@steviemac2475]

@@GamerMuscleVideos I was looking for the podium wheel and pedals that works on xbox one

[@askanracing]

recently got my DD1 and read the instruction manual to see "IMPORTANT: Take care not to use high forces when attaching the steering wheel." and then me 5 min later: 13:31

[@GamerMuscleVideos]

Can't get it on the shaft without some force.

[@mrp32gtr]

@@GamerMuscleVideos I have no problem at all on my DD2. You need to loosen the tenson screw behind the quick release....

[@BobbyDazlerRS]

Need, thing of beauty 👌🏼

[@showtime951]

Why on earth would ANYONE EVER drive with a steering wheel with digital data shown on it, also an on-screen overhead dash display, also an on-screen virtual steering wheel with duplicate digital data on-screen display?

[@Vikingkinggaming]

Is this still a good wheel?

[@GamerMuscleVideos]

Its not bad , club sport DD is better though as well as some of the other wheels on the market.