FANATEC QR2 IS FINALLY HERE! - In Depth Review and EVERYTHING You Need To Know

[@lucianp87]

I didn't expect this to be released before Half Life 3.

[@Tautulis7]

What's next, rain on iRacing?

[@laurasfar18]

Epic comment - you win this round 🏆😂

[@Chris-rf6xj]

Great one 😂

[@markvanwalsem3201]

😂😂😂

[@May2slow43]

We all know valve can't count to 3

[@Deeptronic1990]

I have a ton of Fanatec wheels, all equipped with the QR1. I run those wheels on a DD2 and a DD Pro. All have a tiny bit of flex from side to side but absolutely not noticeable while driving. I‘m gonna save my money and countinue using the QR1.

[@ThePower1037]

It's kinda ridiculous how expensive they are ngl.

[@jurgenw.5452]

Gut so, weiter mit QR1😊😊

[@mike617]

Have you made the change yet or continuing on just fine with the QR1? I have 3 wheels all with the QR1 but I want to upgrade my GT DD pro to the clubsport DD+ which comes with the QR2 so I’m considering upgrading the wheels🫠

[@eloy559]

I wanted to get the qr1 but there wasn’t any so I got the lite how long will it last before I run into issues because I bought two wheels so now I’m thinking I should’ve got the qr2 but there so expensive

[@scavenom2008]

........ok

[@AnthonyCaddo]

Very happy upgrading from the QR1 Lite to QR2. QR2 removed a significant amount of flexing and slop. Received the QR2 within a week of placing the order, nice work Fanatec.

[@Netrole]

I'm so happy that it finally released. I feel like I got the short end of the stick in terms of machining accuracy. I don't really mind the flexing, but that clunk and the feel of the shaft rotating within the QR without turning the wheel were just really bad. Happy to get this and have a solid QR

[@janik307]

Mine was so stiff, that i had to sandpaper a bit because it was so stiff 😂

[@mulltit.assking]

I've had a mix of both across my collection. Just put elec tape on the shaft slot if it is loose or take a polishing disc to it if it's tight. Perrrrfect

[@Netrole]

@@mulltit.assking Yeah i tried that. But i need to remove to wheel to get in and out, so quite a bit of on-off action. Tape was gone within a day

[@dirtysouthracingnetwork8830]

I’ve honestly never had a bad QR1 I got lucky felt bad for the ones that did

[@joshuavettiger7791]

I have a CSL DD. Is the clunk mentioned in the video and the one you describe an occasional, single, quite noticeable clunk typically experienced under high FFB load? Because that's what I notice and have wondered if that contributes to my wheel disconnecting. It can also happen (though not as big of a clunk) when driving in a straight line sometimes

[@EPiQ_cR]

Feels like forever...but this was joyous news. Never would have known if it wasn't for your EXCELLENT video. Keep up the amazing, informative content as always.

[@ivangomez8067]

Never really had any issues with Qr1 on my DD1, apart from finding the nut/rubber tightening method annoying when switch wheels. Glad they finally released the Qr2 and seems like a much quicker process to cycle between wheels. Excited to check it out.

[@I_Like__bananas]

I semi tightened the rubber thing and just swap them like that.

[@bobolimasterflex]

Just got my qr2 for my dd1 and I hateeeeeddd the way you had to unscrew and what not. It is so much better now. Idk what they were thinking with the first dd1 shaft

[@marioslrzn]

That new QR2 is the best out there now. it's so solid and what I like the most is the easy on and off. I used to hate pulling my wheels off, felt like i was going to break it when trying to get my porche of my DD1, so much better. Also, the wheel feels so much better now, I can tell the difference while driving it too. More details on the road. night and day, feels like a new DD all together

[@str8ripn881]

So just ordered mine and now I am not sure I will want to ever spend the money($170) to swap to full qr2 unless wheels start to come with it standard. I dont want to have to pay another 100 on top of every wheel you want to utilize the qr2 I honestly dont see myself switching wheels a ton. If I feel too much in the qr1lite as it comes does the qr1 metal with the screw really that much better? I may get that ordered up if I feel it at all when driving. It was kind of a spontaneous purchase so didnt look into that part much or the cheaper csl lc pedal but I am sure it will all be better than g920

[@RacerScott]

I know you mentioned it very briefly, in my experience using the locking bolt tightly removes all clicking and most if not all the movement in the QR1. It's extremely important to use the locking bolt as it protects the pins from any possible damage. I feel not enough people use the bolt then eventually have problems. Slop creates more slop without bolt, then by the time you decide to use the bolt the tolerance is worse than new. Use the bolt tight everytime!

[@HSV-604]

I've still snapped pins while using the locking bolt somehow

[@AndrewSmith-sd2pr]

100% agree. I used the bolt and never had an issue. But that makes the 'quick' release not 'quick'. Defeats the purpose.

[@TigerDave]

This. I also put some rubber o rings around the locking bolt to eliminate any clicking caused by the bolt shaft contacting the qr1.

[@LeoDavidson]

Thanks for a great review, as always! I never had any flex issues with the QR1 (guess I got lucky) but I'm definitely upgrading just to get much easier wheel changing. Glad this is finally out!

[@momchilkarchev5019]

Im new to this world , but after looking at Asetek, Moza ,simagic seems kinda absurd to charge 250 for just a QR on top of base price.

[@Missch_1]

Simagic quick release costs 70 dollars, lol. You can buy a Simagic wheel with QR for 250 dollars.

[@Tautulis7]

Bundles are 160€. And it's likely not to cost extra for wheelbases

[@brianz7850]

If you're buying a new base today, it should be coming with the QR2 already installed. It's not 250 on top of the base price. It's only for those that already have a base and want to update to the QR2 system, which is a heck of a lot cheaper than buying a whole new base.

[@MakatakYT]

@@brianz7850Unfortunately no. Even if u buy new base/rim from fanatec now, you get only QR1 for free. U have option to upgrade, but u have to pay same price...

[@AndrewTSq]

@@Tautulis7 but you need to pay postage also. Its 203 Euro ($215 USD) at checkout for me. Insane price if you ask me. The Moza QR is 67 Euro shipped to my door.

[@mra091666]

Excellent Review. This is the first video I watched about the new Fanatec QR2 and I would like to say thank you for the very detailed review. I found a seller online and purchased the same Entity Torque Wrench since I do not want to have any issues with a loose or over tighten shaft and possibly screw up my CSL DD Pro. The $15.00 (USD) cost is well worth it.

[@Snaggletooth68]

could you pass us the link please? im looking for it now. thx!

[@mra091666]

@@Snaggletooth68 Hi, I just saw your post. I just searched for "ENTITY TW30 TORQUE WRENCH" online and the search came back with numerous seller's. A few of those offered free shipping as well. I hope this helps.

[@John-ok8ts]

I had zero movement until I started swapping wheels with my PS4 DD1 but the locking screw removed that. What's a far bigger issue is the sound of plastic cracking which is worse with a solid QR. Fanatec please release an aluminum back for the Formula V2 rim - No R&D needed.

[@rankisdumb214]

I gotta be honest, the QR system that came on my Podium DD1 and Formula V.2 wheel fits together with a tolerance ive never seen on any gaming equipment before. Idk if i just got lucky and received a good batch, but the wheel gas absolutely ZERO wiggle. Ive never needed to use the lottle screw to hold it in place! It fits together so tightly it requires a decent amount of force to take the wheel off! Personally i dont see how a system could be better as long as the tolerances on the milling are correct and consistent

[@MetroBoy402]

Thank you for the in depth analysis on the QR2. I reluctantly ordered, but that was mainly due to price. I switch wheels often and hate bolting down the retaining screw every damn time, and can't get past the "clunk" without the bolt. I know there are other brands out there that may do better, subjectively, but the vast array of rims offered and the ones that I own already keep me in the Fanatec fam. Pedals, a different story...lol. Love the work you and your team put in. It is a true passion project that you all are stellar at putting out there for us racers. Much love, and keep it up!

[@ahmadbirani6605]

Great review. I've never had issues with either my dd pro or my dd1, although I always use the screw. I was pretty happy with my setup and didn't think much of the slightly extra time to swap rims, and I swap rims often. After watching this I decided to pull the trigger and pick up the Qr2. Im not gonna lie, I haven't been this excited to fiddle with the rig in a while. Thanks again!!

[@prozekutor]

Fanatec should have come up with a trading system. You get the QR2 at a hefty discount if you send back the QR1. Plus, it would have made the company look more eco friendly. Sadly, Fanatec charges the price of a wheel or even a base if you own more than 1 wheel for a QR system which should have been out years ago...

[@dimsoneill]

Yep, the price means I won’t be upgrading. What a joke I have yo pay them over $500 just to fix their design fault.

[@prozekutor]

​@@dimsoneill it's not a design fault, they had a system which was fine for the csl elite etc... every manufacturer regardless of industries produces versions of its products that are better throughout the time, Fanatec is not to be blamed for that. Again, QR1 works fine. The biggest problem with QR2 is the late release, making all those who bought into the fanatec ecosystem wish they had it from start. But fanatec had bigger fish to fry, namely, production and stock issues, fierce competition etc... Still with the money they have, development should have been quicker (especially considering they just copied real racing quick release), but they better release a product that is available than do a paper launch.. Anyways, it's good for upcoming bases & wheels, but honestly, QR1 it is for those who value their hard earned cash more than the hyped novelty.

[@dimsoneill]

And then they brought out DD products with far higher Torque and didn't upgrade the QR to suit, so yeah, design fault. As you said, fine for the belt driven stuff, not fine for the DD. Rubber compression rings band-aids didn't cut the mustard. And no, the QR1 wasn't fine, which is the whole point of the long awaited QR2. @@prozekutor

[@BboyVReck]

Honestly, i would get QR2 if i own BMW M4 GT3.

[@prozekutor]

@@BboyVReck boi if you had that car it would come in baked in 💀

[@the_real_beaker_]

I am a victim of the disconnection issue and I am so happy to see them address this. And yes after many driver updates and driver update freezings and bricking of my base and then waiting for an RMA jus to find out this was the issue, ya this is great to see. I was going to just get an aftermarket clamp like the one in the QR2 and calling it a day but after finding out that this one flexes a lot less and doesn't have as much play I will probably end up upgrading. Fanatec's site is down right now so I can't order but I am sure I am in a long list of people trying to get them. So thank you for making this video so I have to spend more money hahaha but now I have an excuse to buy the BMW gt3 wheel since it comes with the pro QR2 with it hahaha

[@cozmiixx]

did you order the qr2 and if you did, did it fix the disconnection issue?

[@the_real_beaker_]

@@cozmiixx I did get the qr2 and no I haven’t had an issue but I haven’t checked in since I put it on to see if it’s pulled out

[@cozmiixx]

@@the_real_beaker_ thats good news then. did you have a qr1lite previously?

[@the_real_beaker_]

@@cozmiixx no the qr1. It’s night and day difference.

[@the_real_beaker_]

@@cozmiixx came back to let you know that the newer clamp still allows the new QR2 shaft side to slightly pull out and will leave you mid race with no wheel controls. You'll still have FF but none of the buttons on the wheel will work, including the paddle shifters... I have since bound my sequential shifter as a secondary just in case. It's a simple fix for the shaft, just loosen the clamp, and push the shaft back to being flush with the wheelbase. Part of the problem is because the QR2 wheel side doesn't open all the way so you have to pull kinda hard to get it off, which will slowly start to pull the shaft out. I was already looking into simagic, now I am gunna pick one up soon

[@Benry1984]

Excellent review. Seems like a much better product which is very frustrating for my 2 week old gear. With 2 wheels I'd be up for over AUD$290 for the base versions (and I can't even just do 1) for something that is supposedly going to be 'included as standard' very soon. With a 2+ year lead time and almost no updates provided, it's not like it was reasonable to expect a release to actually occur. I'm hoping they offer more than the weak bundle discount currently on offer to those who purchased recently.

[@gonzotronn]

I agree. I also just purchased a CSL DD and Pedals. Even if I wanted to take advantage of the discount of buying the QR2 installed on the wheel base, the wheel sides are out of stock so I wouldn't be able to use my new gear until they are restocked. Guess I'm the idiot for buying Fanatec instead of Moza.

[@rudyg323]

I just bought like 7 steering wheels with QR1. I think I’ll have to stay with them for a year before moving on the QR2. I’m really liking Fanatec products.

[@grayzedynamics]

Definitely a nice upgrade. Still requires you to change out the stem which can bring tolerance issues. The issue I still have is if you want to use a third party wheel, you still have to purchase the podium hub. Another expense compared to some other brands. Asetek, Moza, Simagic.

[@resset100]

I was gonna upgrade CSL DD to DD1 when I found out I have to buy new podium hub with each wheel I switched to Simucube. I understand that some people don't like USB cable hanging from your wheel but with CUBE-CONTROL wheels coming with wireless connectivity as standard you basically pay Fanatec penalty fee in the form of podium hub for using other manufactures wheels. Thanks but no thanks.

[@alecmillea4539]

It’s especially bad when you realize that there is no hardware problem stopping them. It’s only software forcing you to buy expensive proprietary stuff from them….

[@grayzedynamics]

@@resset100yeah I do not mind the cable and if you are wanting an eco system, go with so many others. They all let you attach any wheel and only need wheelside QR.

[@grayzedynamics]

@@alecmillea4539that is how they keep you locked in, this is a good upgrade but still not great. they are afraid to upgrade and leave some fans behind, but it is the nature of evolution. some will have to adopt the new standard.

[@matrix344]

I sold DD1 ps4 and got a simucube 2 pro and with a 65€ QR i attached a GSI Hyper P1, i'm ok to pay 1900€ for the wheel not 200€ for a piece of aluminium to attach the wheel that looks like a tax to be paid to fanatec, oh and gl getting a high level fanatec wheel unless you want to pay 1500€ for a wheel without a display, their signature formula wheel got 6 reskins but can't live up to competition from other manufacturers in the same price range

[@rykerhasyounow]

Hey man, great vid. Ill be jumping through your affiliates soon for a replacement set of these and the new v2 hub! Thanks! Just a side note though. Couldnt help wince at the thought of you having to stay home and work while your fams travels to the US. I make no assumptions about your personal situation but weve seen too many times before the burnout that the pressures of youtube can bring to creators and i just want you to be careful. We're seeing creators drop like flies with real and genuine health issues and its crazy. I hope in this mad grind to keep food on the table and create great content for us, youre still keeping a good balance man. Please look after youself dude. Love ya work!

[@4Kcorner]

What a review!!!! Excellent information with flawless delivery as usual

[@brandonduley]

Thanks for the great review!! Ordered the wheelbase side this morning and waiting on the QR2 Pro to show up from my M4 GT3 wheel purchase

[@blastu2fool]

My man I really enjoyed your video, the work you put on fanatec products, they need send you a paycheck. As I made the plunge and bought in the Clubsport DD+ now I have to change all my wheels to the QR2 quick releases.

[@wlls]

This is great and I want it but I really don't want to spend over $800 to upgrade all my wheels

[@tim_ten_]

There doesn’t seem to be any discount available for those of us with many wheels. Would cost me over £1000 before vat and shipping for my wheels and base.

[@bystander85]

Great overview and instructions. A little unfortunate to see the bend test was done with a wheel base mounting system that flexes itself but it was still clear the QR2 is a better design.

[@DaniMacYo]

It’s been 84 years now I’ve been waiting for this video. 😅

[@2Negativecool]

Thanks for the review Will. Thank you for everything you do BTW. I need these videos.

[@gregwootton]

QR2 Pro looks nice, not sure if its worth $200 though.

[@sinz1875]

Yea agreed i’m on the fence about picking this up just yet.

[@vjollila96]

it being FIA certified probably pumps the price alone

[@AndrewTSq]

A FIA certified quickrelease from Sparco is $40 less here.. so nah, would not bother with Fanatec in that case :)

[@ChrisSauer-oe5ve]

You mean $20 dollars max 👆😂 Trust me, I’ve had products manufactured there.

[@reviewforthetube6485]

Its crazy to see the dd pro pump out so much more detail then the dd1 in the same game. Thank god fanatec came out with the dd+ since it feels stronger then the dd1 hitting peaks of over 20nm and having 15nm homding torque. Yes fanatec confirmed the dd1 peaks were 20nm but only 15nm holding but now the dd+ does that and it has so much more detail then the dd1. So go for it and enjoy! I know I am!

[@VodkaRob]

Looks pretty solid but I'm not going to rush out for it straight away. I do have metal QR1s on all my wheels and I'm reasonably happy with them. I don't know if you know (you probably do) but your Mclaren GT3 wheel with the original shifters has a third party mod which allows you to put clubsport shifters on it and it really improves it. Great video as always, thank you ✌️ 😎

[@januza]

same here.. I get all sweaty that I need to pull wires from my DD2

[@dburzlaffs]

​@januza did it twice on my DD1. As long as you spin it loose the wires comes come out pretty far for easy connection/disconnection. I was sweaty the first time also.

[@brechtdebaene]

that new clamp should indeed get rid of the problem of disconnecting shafts. I bought a replacement clamp from ebay that looks similar to this one and it completely got rid of the issue. honestly Fanatec should send out these replacement clamps to all CSL DD owners.... but..I guess they won't.

[@i7rooper]

No. They sell it for $200

[@Kudalinny]

Outstanding review like always Will! Not sure if already existing bases and wheels will come with the new shaft and QR but if thats not the case, $200~ is quite the steep in price for a new wheel and base i'd say, thats a whole extra wheel you could buy. Regardless, QR2 looks very solid and cool, a much needed improvement!

[@drewpydesigns1054]

I'm glad they can ship you a new product that just released...... here I am waiting for my order for over a month

[@Pustul]

Coming from a CSW 2.5 I can’t wait for a 12-15 Nm Clubsport DD equipped from factory with the QR2!

[@n3rdstrength]

Amazingly detailed video. I watched most of it and didn't hear you say whether or not you recommend upgrading from a QR1 to a QR2. I think the vast majority of people buying this product are in that boat. Thoughts?

[@paulbyrnes]

Great review. Can’t wait for it to turn up. Ordered QR pro as soon as I finished watching this review. Thanks boosted media

[@jeffdobell4821]

Thanks Will for the advice I just got the qr2 for my csl dd I had terrible disconnection problems had a heap of play side to side was just about to throw it out but seen your review on this gave it a go no side to side movement it’s rock solid

[@OutLanderUSN]

I'm not feeling a need to upgrade to the QR2 just yet, but I am glad it is there and ready for when I finally do.

[@JorisDek66]

I'm so happy i saw this video in time. I ordered before i completely saw the video, but now its sold out already. Just in time. Good luck for the others!!!

[@tehsimo]

Thanks very much for these videos, the fanatec ecosystem is completely baffling to a newbie, but this cleared up all my questions about these quick releases

[@greguska67]

Thanks Will & Tom. Your reviews are really helpful when deciding if and when to upgrade my equipment.

[@raroxburgh]

Yep, long moved on from Fanatec. A little too late, they took forever to being this to the market. Happy to see they finally did however.

[@bigdbarger]

Just when you thought you were done with upgrades... now I need a new shaft and 3 QR2's 🤦🏼😵‍💫

[@NoOne-zo6gj]

Great review, very helpful seeing the movement up close. The issue with all DD wheels is the shaft length, the shafts need to be shorter so the wheel is closer to the base, that is why shafts are breaking too. Take a look at the belt drive wheels, the wheel is closer to the base, no to little shaft flex.

[@Daz555Daz]

The long shaft is great for people who place their screen in between the wheel rim and the base.

[@giogamer4825]

Hey Will, thanks for the review. The only thing I was hopying for, you would do the dimension of the QR1 vs the QR2. The reason for asking, will the wheel sit closer or the same to yout sitting position, without needing to change your base/wheel position. Hope you can let me/us know

[@dimsoneill]

Good question! I don't wan't to have to re adjust my rig.

[@Rapid_GT]

With the Base-side Nickel Type M which is higher quality plus the weight of the DD1 made it an overall more solid combination, you could instantly see the difference Vs the DD Pro Type C combo which was still very good, cheers for a very detailed clear understanding of how all this works, the "base side" "wheel side" Type M and C etc can be a bit confusing until you've watched this. Just to add it looks even more solid with the Club Sport V2 type wheels which is understandable at 27" which are a very popular wheel for GT anyway.

[@RaiyzorX]

One of the best reviews/install videos ever thank for the super informative video!

[@cavemandan543210]

I literally have a picture of my busted lip after trying to pull off one of my wheels. What a chalked design, though as you’ve stated it’s understandable how we arrived here…

[@johnathanmoyer2375]

Man, the solidness of the QR2 on the DD2 looks incredible. I can't wait to get mine. I worry that the QR2 Pro might have me feeling spoiled and I'll need the Pro on all of my wheels, not just my BMW wheel.

[@tech-eddy]

Victim of fanatec? My new QR costs 35€!

[@johnathanmoyer2375]

@tech-eddy I don't even like the authentic D1 QR on my friend's Miata, let alone the chinesium QRs that people get for their Moza wheels. A QR shouldn't spin around till it's seated, especially if that QR has a pin out data connection.

[@May2slow43]

​@@johnathanmoyer2375but it being cheap plastic on fanatec is acceptable though?

[@May2slow43]

​@@johnathanmoyer2375i have a NRG qr in my Ford Focus ST it feels very solid, and my Simagic alpha U better than anything fanatec has made

[@adzy1893]

what a great video, thanks Will

[@soracing]

I’ve been using a g920 for ages and have been looking to upgrade, and I was tossing up between moza and fanatec, and was originally going to go with moza due to the fanatec QR1, but now I think it’s back to the comparisons

[@braydonromer591]

Great video! Answered all my questions and more. Did see the hour long video and was like shittt but I watched the whole thing and was very entertained. Great stuff thanks again! 😊

[@vincentschwaller1478]

if i had the money i would buy a whole setup right now, the QR2 seem really like a upgrade for the feeling and ease the change of wheels

[@EliasWEC]

Why would you go for fanatec? 1. Literally the worst customer support i have ever experienced 2. Products braking all the time and i have to use tape to make shitbox stop making sounds 3. Overpriced af 4. Go for Moza

[@May2slow43]

For ease of changing between wheels, you shouldn't have chosen fanatec for that one. Moza and Simagic are the best on that regard

[@StonedRambo01]

IT'S ALIVE! I thought this was like Star Citizen..... just a figment of my imagination

[@MrFatman489]

Will your a legend .. i KNEW youd have this video within 24hrs of it going live on the website lol but fid have a question for ya. Does this add length from the base to the face of the wheel? Looks taller but hard to tell lol Either way great video and thanks for constantly kicking out constant and quality content for us!

[@bschalker]

Definitely going to order this for my DD1 the Porsche Podium Rim and the Fomula V2... just cant decide between the Pro and the Standard... somhow i think the Porsche rim deserves the Pro.

[@TurninTrackOut]

Just ordered mine. Looks like a great improvement.

[@cullendavis5199]

Great review, super informative! Regarding QR1 experience, honestly, with my DD2 there is flex when you're actively trying to push/pull on the wheel, but when driving it's not enough to be noticeable. I noticed it during my initial setup back in 2021, but since then it's honestly never crossed my mind since. But I do have that rubber ring torqued down and don't need to change wheels.

[@UmbertoNoto]

in order to be more efficient you should try the plastic QR with the other wheel, P1 wheel is in plastic and oscilation is also related to that wheel not only to QR2. This is clear visible in the video.

[@shaunlunney7551]

Great breakdown! Will likely pick one up later once stock stabilizes and sales happen!

[@shawnadams6479]

Great review very informative as always. Cheers Shawn

[@Aniki_66]

the prices are crazy, man, this is insane

[@vman7321]

Good vid, as an ex cyclist, I’m good for torque setting Allen keys 🤙

[@Veterans_for_Harris]

Screw this. It's too complicated. I'm going to check out Moza.

[@Liesthroughisteeth]

Seven mentions of "Ecosystem" in the first three minutes and 4 in the first. Love the channel and content....but I'll explode if I hear it one more time. :)

[@dloc2907]

Great video and info. Please keep the coming. New to Sim and it's awesome!!

[@alecmillea4539]

Fanatec still selling there bases with the QR1 and not even offering the QR2 as an option is a huge mistake. Having to disassemble and reassemble your brand new base in order to get an acceptable quick release will still be enough for some to pass by fanatec as a viable option.

[@Darklord_tK]

The biggest reason I'm in the fanatec ecosystem is console support/compatibility believe it or not fanatec is considered high end equipment for console players where entry level is Logitech or the various no ffb cheap bases

[@davefarmery8180]

​@@Darklord_tKi wouldn't call the logitech g pro wheel and peddles entry level at £1300

[@Darklord_tK]

@@davefarmery8180 I'm specifically talking about the g29\923 when referring to Logitech most people I see talking about Logitech are rarely ever mentioning the g pro base and pedals

[@spongeknock7387]

Great review may be time for me to get into the fanatec ecosystem now as my first dd wheel, i was waiting for this review before deciding

[@ews1532]

i def smashed my nose once getting the QR1 off. another advantage of this mechanism should be eliminating the stem becoming separated from the on-off process ultimately leading to the wheel not functioning requiring an adjustment. i had this happen to me for the first time and, while it was an easy fix, it wasn't something i anticipated so i had a bit of a panic moment until trusty reddit helped guide me to the correction.

[@Leadfootedpom]

This is an excellent video, thank you so much! 👏🏼👏🏼

[@Chidorin]

simagic/moza’s qr look more reliable

[@fermillo65]

The torque spec is a funny one. I had a problem with my CSL DD base when it arrived and they asked me to re-tighten that screw, but be absolutely sure it's 8 Nm. How can I do that without a torque wrench beats me, and you could damage things if you do it wrong. Considering how critical it is, I refused to do it so they made me send the wheel to them. Obviously this wouldn't be possible if you get the QR2 bundle but shipping a basic torque wrench like that one is essential since it's a manufacturer requirement, basically.

[@stevenwex8966]

Just found out about this, another reason to delay getting a CSL DD, 9 months later looks like the ready to race bundles still come standard with the QR1, and the CSL 5N sold out. Then something about Corsair buying Fanatec, I'll look again at Xmas, might be more clear what's happening. I think Fanatec will sell it's QR1 stock out, then QR2 will come standard.

[@LLB.13]

Lets hope the QR2 is better than Fanatecs customer service 😬

[@LindsayMuddle]

Honestly ive been waiting for their customer support to respond to me for 3 weeks about my broken wheel

[@LLB.13]

@@LindsayMuddle It’s actually incredible how such a well established company, with such great revenue (since everything always gets sold out fast) have not been able to develop their CS departement in years.. Also around 1 week into waiting for a answer after I recieved my order and found half my wheel was missing :) In total soon 4 weeks from original order, and I live close to germany..

[@EliasWEC]

@@LindsayMuddlekeep waiting😂 i recommend to switch to moza

[@Netrole]

At this point even the QR1 was better than their customer service

[@Darklord_tK]

​@@LindsayMuddlethere service department is in Germany getting in touch with them outside of Europe is an absolute nightmare but at least the repair was pretty quick after the back and forth with support got my stuff shipped and back within a 2 week frame and it was out of warranty

[@jimashby43]

Can't thank you enough, I went with Fanatec because I thought it would be easiest to go through your videos and pause when needed during setup.

[@jimashby43]

I only have Project Cars 3. I would love another game. What would you choose for a Grandpa and his enthusiastic 11 year old Granddaughter? Anyone could answer this... please.

[@BurtSampson]

Fanatec has had some good deals going on recently, and the competition in the market has been great for the consumers. But I think people are either forgetting, or maybe they're new to the hobby, but Fanatec used to be a pretty fancy/high cost option in the sim market. At least for the majority of racers. Not excusing anything here, but I just thought people need to remember that Fanatec can be considered a fairly premium "consumer(?)" level brand in the sim space. New players came into the market to directly compete with them, which drove costs down all around. But Fanatec still is known for having some costly stuff.

[@MobileMrManiac]

.Agree. I got A G923 almost 2 yrs. ago. First wheel but have been racing in games for 25+ years...I did expect to get a fanatec for a few years. I just got CSL DD 2 mnts ago, and I freakin love it. Amazing.but before I get carried away.. Will. great videos, great content... going to get me one these now too. I just hate the waiting for shipping.. amazon has everyone ruined.

[@dimsoneill]

Irrelevant. They have to complete in the current market where they are not premium offerings at all.. The upgrade price for 3 wheels is a joke.

[@BurtSampson]

@@MobileMrManiac I was on g29 for 6 years before getting a csl DD when the Ready 2 Race bundle came out. I've spent a few months with it myself now and it continues to amaze me with how good it feels to drive on. Fanatec was always one of those companies I never thought I'd be able to afford gear from. Glad I finally could.

[@BurtSampson]

@@dimsoneill sure is nice being able to go from 5nm to 8 for $173 including shipping. Nobody else can do that. There's no better, or cheaper way to get your foot int he door and then upgrade form later on. None.

[@flipcoin6301]

The recent deals were to dump the old quick release inventory, before the new one is out. So the folks who bought a recent bundle got shafted with the old style.

[@AttilaTheHun333333]

I’m putting a bundled QR2 into the shopping cart, yet they don’t account for the bundle discount at the checkout…classic Fanatec.

[@Tautulis7]

Yup, same

[@boostedmedia]

I'd suggest waiting if that's the case. I think they're still working on ironing out some bugs.

[@AttilaTheHun333333]

@@boostedmedia Thanks Will, I’ll do that of course. It’s just baffling to me how they mange to have website related issues at every major product launch.

[@sincity_steve]

For those of us with multiple wheels, and have already upgraded the shaft to a 3d printed Z ring, I just cant justify the cost of upgrading to QR2, when I have no play in my wheels and swapping them is already quite easy, albeit with a bit of force which Im more than used to now.

[@FinnBosse]

They fixed it now!

[@penguinfury007]

Fun fact. The QR2 is just cheap rebranded Krontec style quick release just like how Moza and Simagic use Works Bell style quick releases.

[@eurodj101]

I trust your reviews so i ordered 2 QR2 and the shaft for my dd1, il lorder a thrid one later on, almost 400 for this order but ive had mine for a few years and still rnnig welll, figured im refreshing it instead of swapping to some other brand, i think stuff like this thought expensive and maybe shold not be a thing really but does get you more life outta a old product

[@SidVish]

A torque wrench is must for these things. Ive just had to spend £50 on 1. Fanatec must certainly need to include something like in the kit.

[@AmariMaahes]

Excellent review! I can't wait for your review on the new PlayStation Clubsport DD+ 15nm wheelbase.

[@shanewright9489]

Can’t wait to get this. Been waiting forever

[@tassadarforaiur]

The bundle prices on the qr2 base+wheel kits dont seem to be working once the item is in the cart. At least for now

[@CF_Explore]

I'm thinking that adding a bolt like the one on the QR1 it's always a good idea for those who don't swap wheels so often. Just to make sure the wheel will not come off and doesn't create tolerance issues over time. But I was waiting for that QR2 since I get my CSL DD 8Nm... I was using grease and all the internet tricks just to make sure my QR lite doesn't fall apart over time. Now it's the time to upgrade it all, and buy new wheels when they provide them with the new QR2

[@mattm6430]

What are the tricks?

[@JuliusLemonhead]

Great video 👍incredibly useful information for me as I think about purchasing a DD setup. The used markets are flooded with an absolute mish mash of Fanatec gear, the prices seem to be over inflated when compared to the basic ready2drive kits direct from Fanatec at £435 delivered😊

[@tech-eddy]

Would be nice from fanatec to enable 3rd party usb wheels without the podium hub! I can't understand why they don't solve this like moza (deactivate connection in shaft in software). 2nd point why I sold my fanatec ecosystem

[@superstar5042]

Why solve this if you can make money from it? People should stop buying their product if they want fanatec to become better and more customer friendly company. For now they are just trying to grab as much money from their customers as they can

[@giangigiangi-fq1ep]

QR1 on Clunsport 2.5 is perfect on my case on two different wheel... no problems, pins broken or movement... o my case it's good...

[@DOBROVONAIR]

excellent, thanks for the review.👍

[@-fatal-]

Thanks for the review Will! I have a ClubSport RS with a CSL DD and waited for the new QR to buy a Formula wheel, I will upgrade. :) Rattling without the screw is very annoying on the QR1.

[@michaelb3798]

Thanks Will. Just ordered mine

[@braedonrogers5534]

Dang. While this is a great and marked improvement, I cant help but wish this was on par with moza and simagic QRs (only the plastic qr, the others seem good)

[@H_llorca08]

will they still selling the old quick releases?

[@Emrahsuna]

❤ Thanks Mr Boost. Love your videos

[@nathantw]

I have a LE 2021 Formula wheel that has the Podium Advanced Paddles and a CSL DD. The mount clanked with a sound like a spring coming out. I think it was one of the ball bearings slipping and then going back in the hole. I used the screw pin and that solved all the noise. However, after an hour or two of driving it would work loose and would need to be retightened after I started hearing a metallic sound. Even though the current system works I figured I waited 3 years for the QR2 so I'll just purchase it. I went with the gold ring even at it's $100 premium. It wasn't until I heard Will say that the only difference was the color and a little smoother that I realized that maybe I should have just saved that $100. Oh well, it's already ordered and I don't feel like canceling and reordering. That said, not having to put the screw in is going to be great!

[@skolvikings5263]

More ways for Fanatec to take your money!!

[@reycarlosantos5055]

Without the screw on the QR 1, theres a metal to metal vibrating sound thats created. This version removes the use of the screw and makes real sense of the word quick.

[@IsItAnyGood]

When are they performing installing them on wheels and wheel bases?

[@andmo90]

The cast qr2 will be a more brittle alumin(i)um than the solid block cut version and thus more likely to crack. After a couple years of steady use/cyclical stress you might notice the difference.

[@Bajomano]

The only absolutely stiff zero flex QR in the market is the Simucube's. It's not "quick" but it's the best.

[@redeyerob2176]

Agreed, had a DD2 for all of two weeks and granted this was during covid so production tolerances might have suffered but both my QR1's had quite alot of play in them, refunded and bought a SC2 and haven't looked back since

[@BigMeanyVids]

Triple thumbs up on this video. Great job. Probably the pro for me.