Fanscreate Sugon T26 Soldering Station - SPOILER its good!

[@olodoh5196]

have u tried connect T245 handle to this unit ?

[@yoshiyusof853]

maybe now you can review a oss teams t12D solder iron.. and im using it.. so compact, fast heat, and also portable.. you should try out.. best for 2021 year were everything goes portable..

[@leesmithsworkshop]

Very nice solder station, when my ts-100 eventually breaks around the power jack section I would take a look at one of these.

[@backofficeshow]

I am a big advocate for the ts-100 but it certainly has some issues. The Jack is quite bulky but I guess they do not have many other options to get that current into such a slender body. It does sometimes feel like the Jack and the lead weight a lot more than the iron. (I suppose this is true!). A super capacitor iron would be a real cool idea that charges in its stand. I hope someone makes this!

[@skor_avensis]

I really, really need to upgrade mine. I have a cheap Draper but my GOD it's woeful. I would have more luck soldering with a spoon heated with a blow torch. This looks excellent and amazing quality too.

[@backofficeshow]

I have been using this on for quite a while and I am really rather happy with it. I know a lot of the ZD equipment is popular, but I do think I will be inflicting those on myself again when this level of quality is so easily available now.

[@mrofficialraheequr7765]

can we buy in india also fanscreate

[@tommyarvidsson8907]

Well, for what i do, iphone, Ipad etc that tip is needed. For what you do, i would say wrong station. Go with hakko insted :)

[@shoubhiksaha2788]

Is it ok for doing heavy soldering in THT for hobbyist like me and have you tried for tht yourself?!

[@backofficeshow]

It's just as capable with tht

[@hantusangap]

look nice.using fx951 now should i upgrade to this one?

[@backofficeshow]

It's your call 😂

[@eazysmokes3743]

If you want more power and jbc stuff

[@shoubhiksaha2788]

Does it support the t245 handle?!

[@backofficeshow]

You would need to check with the manufacturer, there is a link in the description

[@Ratchet_effect]

I was going to say it has the look of, JBC or Pace style soldering iron(s) then I seen on the site it says, supports JBC iron tips. Thanks to your direct link Dr A 😀👍 Before I go ahead, as I'm very interested. How long did it take to get to you ? & Will I be able to use you're discount code still around the middle of next month ?

[@backofficeshow]

That's it, the tips are JBC so you have plenty of spares available should you mash them 😂 If I recall it was around a week or so, so not too long. The discount code should be valid for several months so it should be fine.

[@Ratchet_effect]

@@backofficeshow Andrew Your a Legend!! I won't mash my tips, I will still buy the range I will use daily for it. In-fact, I still have some old irons and tips that are 30+ years old, granted they don't see much light of day now days, but still as I'm sure you do, we look after our equipment. Thanks again may you 🖖

[@CommodoreKazz]

Very nice video. I’m curious how well does it work on larger through-hole electronics like say C64 capacitors?

[@backofficeshow]

I have been using it s while and it works fine, I have a preset to bring the temperature up appropriately

[@kibernaz]

К sugon T26, подойдет 245 ручка jbc?

[@kac3514]

For smd soldering use 0.5mm solder or even better 0.3mm

[@darofernandez3858]

hi, i need schematic sugon t26 pls

[@backofficeshow]

Google might help

[@thedutchretrogamer]

nice vid mate

[@backofficeshow]

Thank you sir!

[@thedutchretrogamer]

@@backofficeshow youre welcome sir

[@mokansteven7582]

5% off of all products? Is it real?

[@fanscreate7259]

Yes, enjoy 5% off all categories by using this code BACKOFFICE on www.fanscreate.com

[@backofficeshow]

Absolutely

[@serdarxxx1073]

Very good Station. JBC is over priced and i ask me for what??? I order T26 now. Thank you man 👍👍

[@backofficeshow]

I use mine every day 👍👍👍

[@serdarxxx1073]

@@backofficeshow where can i buy cheap solder Tips for this Station?

[@backofficeshow]

How about from the same seller? I have not even changed a tip yet

[@ahmedejaz1125]

Those tips are bad for general purpose work, they don't provide enough area of contact to transfer heat quickly.

[@backofficeshow]

I disagree, I have used this iron exclusively for months and have had no issues. You would need to be doing a lot of heavy soldering for it to be an issue and most people are not soldering massive heat sinks to PCBs all day.

[@100ThingsIDo]

Looks nice indeed! :D

[@backofficeshow]

I am finding that I really like the pre-set functions on it. Not having to hold a button or blip on 200 times really is a boon!

[@smugcat2521]

Sugondese nuts

[@backofficeshow]

We have a winner here!

[@chanyou]

yes

[@informediatech-bruno5766]

For the price of a sugon now its not worth as jbc cost 60 euros more

[@tegu4life125]

No way you can get JBC for 60e more ,can you provide an link where?

[@ctbully]

Rule #1 Never use unleaded Solder ! LMAO

[@DIYwithBatteries]

Cool 🤓👍

[@johnburrows7938]

Never a good review if you haven’t used your own money, and, your allowed to keep the iron for free! If you gave it a bad review , do you have to send it back?

[@backofficeshow]

I often give bad reviews and warn anyone sending me items that they run that risk. They make no requirement to send anything back. And I stand by it, it's a fantastic iron and I use it daily no issues so far.

[@johnburrows7938]

@@backofficeshow so the point is, you got to keep the iron, regardless of good or bad review? Just checked your vids...not many bad reviews, unless I’m missing something?

[@backofficeshow]

They I can assure you any KZbin channel turns down more offers than they receive. KZbinrs will cherry pick the best items unless they are paid to do the review. That is why you see a 'paid promotion' type message being required. Also that is also how crap products seen to get good reviews, their promotors are paying KZbinrs to do them.

[@johnburrows7938]

@@backofficeshow I think your still missing the whole point.... the best KZbin reviews usually have bought the products with there own funds. My view anyway...still, viewers can make up their own minds 👍

[@thesadken]

@@johnburrows7938 If you'd watched any of the subsequent videos you'd see him using this iron all the time, so it can't be all that bad.

[@sshaikh3878]

Its an insult to use the Sugon soldering station on a single layered pcb 😭