Fantastic, Simple, Carving a Wizard.

Fantastic, Simple, Carving a Wizard.. #woodcarving
Here I carve a simple 15 minute wizard in Basswood..
so simple and fun to make...
The knife is a Beber BDK Detail Carving Knife.. £12.98
please contact me at... [e-mail]
If you would like to support my channel… you could do so by…
buying me a coffee… in the link below… its a one off payment…
its not expected but very much appreciated…
www.buymeacoff...
Disclaimer
this is not a tutorial .. this is the way that I like to work… you must only do what you deem to be safe…

[@TController]

Each carving has its own individuality & uniqueness. Cracking pieces!

[@AndysCornishCreations]

Hi Joe... Thank you very much.. I'm glad that you liked them.. Take care my friend and all the best from Andy

[@amandatallis9875]

Hello Andy how are doing the wizard carving is magnificent you have made an awesome item. Do you do much carvingas id like to see more. Is Basswood soft as it looked it whilst you carved. Nice to see your dog i love her she is cute. Thank you for showing all your wizards from the different tyles of wood they loo, wonderful. Take carr stay safe in this heat from Amanda xx

[@iansolly5684]

Brilliant Tutorial. I have found this the easist to follow. Thank you

[@AndysCornishCreations]

Hi Ian... I'm glad that you found it useful... Take care my friend and all the best from Andy

[@gwynnfarrell1856]

They're wonderful! I'm fascinated at how the face can be broken down into triangles and refined with even more triangles. Your control of the blade is amazing. Thank you for sharing these rustic fellows.

[@AndysCornishCreations]

Hi Gwynn... Thank you so much... Yes, I was surprised just how many triangular cuts there were... I still need the cut gloves though.. it's so easy to slip... My pleasure... Take care my friend and all the best from Andy

[@RadioFaceWoodWorks]

Very cool...you make it look so easy...hello to Ivy the faithful shop dog🐕...stay safe...press on 😎 Joe

[@AndysCornishCreations]

Hi Joe... Thank you very much... I did have to practice... Ivy says " hi Joe "🐶 Take care my friend...All the best.....Andy

[@whittler0507]

Very nice woodcarving ..you did a fine job ..Thank you for sharing

[@AndysCornishCreations]

Hi Gene... Thank you so much for your kind words... It means a lot to hear from one of the whittling greats !! Love your work and videos... Take care my friend...All the best.....Andy

[@AnthonyWiddowson]

Great looking wizard 😃

[@AndysCornishCreations]

Hi Anthony... Thank you... I'm glad that you liked it 😊 Take care my friend and all the best from a wet Cornwall... haha... Andy..

[@markduggan3451]

A man of many talents.

[@AndysCornishCreations]

Hi Mark... Thank you.. And master of none... haha Take care my friend and all the best from Andy

[@malbun3275]

Hi Andy Great little project for a winters night by the fire,great results thanks for sharing with a good commentary explaining all the cuts Stay safe over there Regards from NZ

[@AndysCornishCreations]

Hi Mal... I'm guessing that you are getting into winter over in New Zealand... We are looking forward to Summer when the rain is a bit warmer 😂😂 Take care my friend and all the best from Andy

[@MarciaHouston]

Andy, you make it look easy. Thanks for the tips and techniques 👍

[@jackthompson5092]

Great job Andy. I love them.

[@AndysCornishCreations]

Hi Jack... Thank you... I'm glad that you liked them... Take care my friend and all the best from Andy

[@denisvienat849]

Salut Andy’s tu es un vrai artiste c’est trop cool bravo pour cette vidéo 👍👏👋 prend soin de toi mon ami 🙏

[@AndysCornishCreations]

Salut Denis... merci beaucoup comme toujours pour tes gentils mots... Je suis heureux que tu aies apprécié cette vidéo... Prends soin de toi mon ami et tout le meilleur d'Andy 👋

[@Mckmake]

as always an excellent tutorial Andy, thank you for sharing I'm afraid my hands aren't up to this sort of work but very enjoyable to watch you

[@kimseyjustkimsey5256]

Very Nice carvings Andy!👍

[@AndysCornishCreations]

Hi Kimsey... Thank you so much... Take care my friend...All the best.....Andy

[@donaldchase6800]

Nice project and great step by step explanation.

[@AndysCornishCreations]

Hi Don... I'm glad that you liked this one... Take care my friend and all the best from Andy

[@garypeiz-fw4ns]

Well done.

[@AndysCornishCreations]

Thank you very much... Take care my friend and all the best from Andy

[@WoodenItBeNice]

They are lovely. I would end up with just a load of small bits of wood that wood need a Wizard to cast a spell to put them back in the right shape. Take care my friend. Cheers, Huw

[@AndysCornishCreations]

Hi Huw.. Thank you very much... Haha... perhaps you could make one of your matchstick creations with them... Take care my friend...All the best.....Andy

[@mykhough6614]

Always so relaxing watching you work and always a great result. This may even inspire me to dig out the bag of basswood blocks and the carving tools I bought a few years ago and have a go.

[@AndysCornishCreations]

Hi Myk... Thank you so much for your kind words... Yes.. please do get carving and don't forget to wear your gloves... Send me a picture of your work... Take care my friend...All the best.....Andy

[@keithhoward9647]

Thanks Andy, I enjoyed that! I've been watching Doug Linker too and I'm determined to have a go. Take care!

[@AndysCornishCreations]

Hi Keith... I'm glad that you have enjoyed this one.... Dougs videos are great... Give it a go Keith, it really is great fun... Wear the cut gloves though. Send me a picture of yours... Take care my friend and all the best from Andy

[@ThePapa1947]

Good stuff Andy!

[@AndysCornishCreations]

Hi Gary... Thank you so much as always... Take care my friend and all the best from Andy

[@davidparkyn4716]

Nice whittle Andy or should I say many nice whittles and very well explained as well, I need to start doing more of this again! Take care my friend

[@AndysCornishCreations]

Hi David... Thank you very much, I'm glad that you liked them... I would love to see some pictures of your whittles... Take care my friend and all the best from Andy

[@MarklTucson]

Very cool. Really appreciate that you did the voiceover and explained what you were doing at each step of the carving and what the result of that cut was intended to be. It's always a pleasure to see your artistic creations. Thanks for posting

[@AndysCornishCreations]

Hi Mark... Thank you very much...It's great that you are enjoying my videos... I'm glad to hear that you liked the voice over.. I think that I will stick with this format in future videos... My pleasure... Take care my friend and all the best from Andy

[@hanapa]

Many times, right after I watch one of your videos, I end up my workshop. This time was another one of these instances. I went, picked up a piece of chestnut and a knife and made my own "Gandalf". As it was a first one it took me a bit more than 15 minutes, but I will practice to get there 😁 Many thanks for the inspiration ♥

[@AndysCornishCreations]

Hi Hanapa... Nothing pleases me more than to hear that my videos have inspired someone to get out into the workshop and create something... Please send me a picture of your work... my email address is in the description... Take care my friend...All the best.....Andy

[@toddatglencovewoodworks]

You are so talented Andy! That looks great. 😊

[@AndysCornishCreations]

Hi Todd... Thank you so much 😊 Take care my friend...All the best.....Andy

[@TheMessyStudio]

I always love your carvings, Andy! You make it look so easy!

[@AndysCornishCreations]

Hi Billy... Thank you so much... Haha... it must be down to clever video editing... Take care my friend and all the best from Andy

[@colinwatmore7041]

Why is my basswood always harder than yours? Nice carvings Andy and explaining the cuts is really useful. Mine would probably end up as 2 or 3 hour cross eyed wizards with wonky beards. Are you demo-ing at Stock Gaylard in August?

[@AndysCornishCreations]

Hi Colin... I used to think that about my Basswood... haha... It does vary though.. I have had some hard stuff in the past... It doesn't matter about the length of time or the result, just how much fun you had making it... No... I hadn't heard of Stock Gayland before I looked it up... Looks like fun though... Take care my friend and all the best from Andy

[@WoodenItBeNice]

1st BOOM. HB Andy

[@AndysCornishCreations]

Well done Huw... Haha

[@indianatone218]

Nice wizard Andy ,im into the owls and penguins there really relaxing to do ,check out Doug liniker a canadian he does all sorts of carving he got me into this , it makes a change from wood turning ,Take care Ant .

[@AndysCornishCreations]

Hi Ant... Thank you... I have watched all of Dougs videos... I really like his work... I haven't tried carving the Penguins or the Owls yet...I would love to see a picture of yours... Yes, it does make a break from turning... Take care my friend and all the best from Andy

[@indianatone218]

@@AndysCornishCreations You can see a bit of them on my channel , making wood carving gouges from hacksaw blades ,theres loads of other stuff its a diverse channel ,some funny ,check out catching mice lol ,