Farmall M Discing with International 370 Discs

Farmall M discing with International 370 discs. Antique farm tractor in operation on the farm. Very old farm tractor in operation on the farm. #farmallfanatic #farmall #antiquetractors

[@Ticky66MN]

Ahhh...listen to that M work. That was the first tractor I drove when I was a kid and I just love that tractor. Thanks for sharing!!!

[@FarmallFanatic]

Best overall tractor pound for pound that Ive operated. Thanks for watching!

[@1959hogryder]

Close to 50 years for me ... { It was a 400.. }

[@FarmallFanatic]

@@1959hogryder id love a 400 with a fast hitch!

[@mattingly1217]

First one for me too.... that and a 826 ... I used to watch the sunrise and sunset in the same day

[@FarmallFanatic]

Outstanding

[@leonarddacus4054]

I’m impressed with the preformance of the M with that disk.

[@FarmallFanatic]

14 footers

[@ronaldolweiler7745]

I can smell the dirt watching this , memories of these old tractors are great , I kept a 1940 A with a woods belly mower just to have an old one

[@FarmallFanatic]

Look at my Red Power auction video...nice A with belly mower sold

[@jimsteele7108]

That disc gave the ol' m a good workout.

[@FarmallFanatic]

No doubt

[@DLTJR1959]

I drove an M with a M&W clutch for many years on the farm as a lad. Great old American Iron that would run forever. Thanks for the video. Great set up you have.

[@FarmallFanatic]

This is set up for the M&W hand clutch...thanks for watching!

[@briandietrich1373]

I love your 756!

[@joyfulgrower6514]

Heya :) Here from JoyFolds... Yeah, we got hammered with rain, yesterday, up here in the PNW. We rarely get flooding, but it happened yesterday. I posted a 20 second video, showing a water fall of rain coming down the hill, flooding the road... CRAZY! Ooh, that’s a MONSTER, man! Imagining the hundreds of hours of back breaking physical labor being saved lol 😇👍🏻

[@CountryFamily]

Love seeing and hearing those old tractors still doing their thing!

[@b.nunn.2702]

That's a load for Sure! Had a Super M with straight pipe exhaust years ago, loved to disc with it! Good video!

[@FarmallFanatic]

Thank you! My next tractor is either an H or a C

[@b.nunn.2702]

@@FarmallFanatic In my book all Farmalls are great! Some folks are partial to j.d.green. but I've always loved Farmalls best. Pull like crazy, and a 10 yr.old kid can work on one! Nice and simple.

[@billfischer6464]

Man what a great video! I learned a few things besides watching a great old tractor working in the dirt. It's good to know that a larger cylinder helps with the lower psi, and also I came to the conclusion that the farmall pumps work as long as the clutch is out. Thanks for sharing and looking forward to the next ones.

[@FarmallFanatic]

Thank you for watching! Yeah not having live hydraulics can be tricky haha

[@ccsworldaustralia4332]

Hi Farmall, that should be a great help to anyone, rain did you say rain? lucky you! all nice and green, Spring looks great down your way, thank you for sharing, would love to have a little tractor down my block.. did you mentioned it is an old boy from the 40th i probably misunderstood.... does a great job for sure, .cheers

[@FarmallFanatic]

Yep, its a 1940 tractor

[@ccsworldaustralia4332]

@@FarmallFanatic amazing, they don't build them like that anymore, cheers

[@rayhayden]

Dropping another LIKE on your video, Watching and Supporting!

[@houndsmanone4563]

As soon as I heard the M running in 4th gear the 1st thing I thought was to drop her in 3rd ....and you did. That's the gear I would have gone in to let off that heavy drag/load. The old M did her thing great in 3rd. Nice job. Full watch.

[@FarmallFanatic]

Appreciate it man!

[@ericchapman399]

I agree third gear found the sweet spot with the motor not labouring just working hard and getting better overall fuel consumption to boot.

[@DakotaandFamily]

Your farm equipment may be old but well maintained ty for coming by earlier

[@johndowe7003]

Ain't nothing wrong with using old iron, you gotta remember these tractors fed America, back in the day the Farmall m was the largest tractor in the market for a few years

[@FarmallFanatic]

It sure is easy sleeping at night knowing that nobody can take my equipment that's for sure haha

[@PaulOtis]

Great video! I love watching folks using their machines to work their land.

[@tomjones8209]

Good old American tractors ! Got-a love them .

[@DadRandom]

M can barely handle this in my mind. Farmers worked the M to death. The diesel m-TA would get the job done! Love your stuff. My grandpa had an M and my other a super H, one went diesel and never looked back. Now my uncle is farming 1000 acres of corn in Minnesota. My other grandpa was a dairy farmer, and the M was perfect. He had an m TA and eventually a 706 workhorse. I have pulled each of every implement you have shown. 51 year old farm kid that was urbanized. sad but I remember my dad dropping me off in the field and saying, I’ll see you at lunch time! 12 years old🤜🏻💥🤛🏻 boom!

[@FarmallFanatic]

Its weird, I was in 4th gear wishing I had a T.A. lever to pull back.

[@glenkellner9936]

We had a gas M, gas 706, and a diesel 4020. My dad couldn't farm to save his life but I miss the farm life. My goal is a hobby farm before I'm 6 feet under.

[@FarmallFanatic]

@@glenkellner9936 HAHAHAHA what you mean he couldn't farm?

[@glenkellner9936]

Farmall Fanatic long and frustrating story.

[@DadRandom]

@@glenkellner9936 Sounds like my story, my dad wanted to Dairy and my Grandpa said diversify, my uncle wanted to Cash Crop. well, my uncle is still a farmer

[@gonerydin4225]

The M sounds good. I spent some quality time on one about 50 years ago. : )

[@Jacquelinexo]

I watched until the end! I gravitate toward farming vids and such. I love tractors! I used to live by farm land and when those tractors were in the field till late at night it was so comforting to me for some reason. This tractor purs like a kitten! Big like👍

[@FarmallFanatic]

Thank you!

[@CowboyJojosAdventures]

I’m not a farmer 👨‍🌾 but this was an interesting video about equipment I have no idea. I’m glad you got it up and running. Have a great weekend 👍🏼🙏

[@RickBork]

Nice disc man. It's nice to see the old equipment out getting it done. Thanks for sharing man have a great weekend.

[@w_hunter2461]

SWEET!!!!!! We just had our M restored and I drove in the parade the same day it got done!!!! LOL

[@cherriesweightlossjourney3323]

Great video TFS i enjoyed watching Happy Saturday to you i'm looking forward to seeing more videos to come Amen take care & have a blessed day Amen

[@stevendyer4925]

I love watching that M turning dirt thanks for the video

[@heprovides5604]

Old tractors are just cool to look at. I like seeing them in the local parades.

[@ATJHTRAVELS]

Ty for sharing your Farming vid sledgehammered that like button I miss living in the country

[@thegreenerthemeaner]

I was 15, ran neighbor's 1944 M with M&W Super kit in it. Weights plus fluid in tires and duals pulled a 10 KBA Deere disc. All it really wanted in NWMo river bottoms.

[@FarmallFanatic]

I'd like to get a set of duals

[@crslyrn]

The old M sounds good dragging that disc. Especially after you dropped down into 3rd gear. The old girl was sounding a little labored trying to run in 4th. The disc was doing a pretty good job working up the ground. Thanks for the ride along. Stay safe.

[@FarmallFanatic]

Thanks for watching!

[@GrantMcIntosh]

New cylinder and hoses BOOM! That's some pretty dirt! 3rd gear! 👍

[@DrewsClues]

Well that sure looks corroded. Yeah, let's see it hooked up. Thanks for sharing! *#FullView**!* *#AllAdsRan**!*

[@christopherkinney7357]

Nice tractor and disc. Practically grew up on that exact same combination!!! Dad had a 370 disc too, his had a lift assist spring and cable that is missing on this one. If the spring ever broke it was a job for the M to lift it.

[@FarmallFanatic]

Very cool!

[@CommunityToursAustralia]

Very nice tractor thanks for showing looks sounds Great

[@EssayonsFG]

Putting in the Spring work! You have me motivated to get at it harder this weekend! 💪😠💪 Rob

[@jonstevensmaplegrovefarms3754]

good to see you having fun! woke up this morning to 2.25" at the farm.

[@FarmallFanatic]

When do yu see yourself getting into the fields?

[@jonstevensmaplegrovefarms3754]

july. if anything happens this month I will be surprised!

[@FarmallFanatic]

You aint plantin corn then lol

[@LyndasDiamonds]

Hubby has been playing your videos to his dad today. He has really enjoyed watching them.

[@sorum29]

I still use these good old tractors for field work no cabs and no gps system i got a 44 m something about the sounds of these tractors i could listen to them all day long

[@FarmallFanatic]

I agree!

[@tomzimnoski97]

That M did an impressive job with a big disc of that size!

[@FarmallFanatic]

It's a beast

[@smallthingshomestead279]

Them M’s get to their sweet spot and dig in and pull like a bear . Nice tractor.

[@FarmallFanatic]

Yep...and the drive tires are loaded lol

[@LWYOffGridHomestead]

Tractor looks & sounds awesome!field looks good too

[@DennysCountryLife]

Nice to see the M grunt a little! Boy do I wish I had sandy soil!

[@FarmallFanatic]

Im lucky

[@23KCOutdoors]

I love to see people disking all they do around here spray that damn no till And they do it right next to all the good water sources not thinking the next day it’s going to rain and boom it all ends up right in the water keep up the good work brother

[@dehavenfamilyfarm]

She got a good workout! Hopefully we will get more dry weather soon.

[@BNOOutdoors]

What a straight up Beautiful machine. You do a great job of keeping that tractor nice. Hell of a disc job!

[@kejay74]

Growing up we had two M Farmal tractors. We pulled 3 x 16 drawbar plows. One was a hydraulic lift, the other trip type. However, we had only 9 foot discs, one for each. Ken

[@FarmallFanatic]

Ive been looking for a 3 bottom. Ive got a 2 bottom, but its just not enough

[@AaricHale]

I really enjoyed watching you disc with old Farmall M . It did a good job with that size of disc I thought .

[@DadRandom]

Aaric Hale we used a similar disk but pulled diesel. I too am impressed with the M pulling this rig

[@wms1650]

@@DadRandom I was surprised at how the M pulled too. My Pap Paw had an M gas and a JD 70 diesel. I think they pulled a 4 row disc. I know they would sometime swap out or borrow a 6 row planter and use the M Farmall. I liked the sound and smell of the JD 70. My Uncle who farmed with Pap Paw always said the M Farmall was more powerful. They also had an Allis Chambers they cultivated with. It was small with the engine in the back. Don't remember the name or number.

[@Rdrake1413]

In my 1950 Farmall Super A I used SAE10 which what is called for in the manual. I did have some trouble with it lifting my IH 1-F36 Tandem Disk Harrow. Replaced the hydraulic pump and works great now. The seal was bad and it was pumping oil into the engine. Love the sound of that 756 working.

[@MomsSelfReliance]

Beautiful land very nice tractor thanks for sharing

[@bobhickling1837]

Glad you switched to 3rd gear...4th seemed to be pulling it hard. We always plowed in 2nd with a 3-14" and disced in 3rd gear with a 10' disc, sometime with a roller behind it. M's are great tractors!

[@FarmallFanatic]

I need a 3 bottom

[@bobhickling1837]

@@FarmallFanatic could you put a 3 pt hitch on the M and use the mounted plow you used with the 756?

[@FarmallFanatic]

@@bobhickling1837 thats a fast hitch plow, but its too big for the M

[@hughes2397]

That's a very nice M sir! How can anyone not love an M Farmall, because that is THE classic tractor to have! That new hydraulic cylinder came from Tractor Supply right! I could tell by the County Line brand lol! That's usually where I get a lot of my tractor parts from.

[@CBsGreenhouseandGarden]

Now that is how you Git-R-Done! Great job done!

[@HomesteadingtheHardWay]

Pretty work with a gorgeous tractor , I started farming with a 400 farmall

[@FarmallFanatic]

Id love a 400

[@HomesteadingtheHardWay]

@@FarmallFanatic I miss mine only down fall it was a tricycle , keep saying i'm going to find a wide front like yours .

[@Masseydriver]

The old M handles that disc, but if you hit a wet spot......she’ll sink like an anchor. They just don’t have power to spare with a bigger disc. Have you planted anything yet?

[@FarmallFanatic]

No they sure dont. Not a seed man...hbu?

[@Masseydriver]

Farmall Fanatic nothing yet. I was going to try and sock some corn in today but rain is on the way. And I really don’t want to get caught in it. Lol

[@FarmallFanatic]

Agree

[@JohnAvantiBK]

The blades turn as you pull them, and hydrolic is just to raise the wheels?

[@FarmallFanatic]

Yep, on this implement

[@scottpearsontoolsmore185]

Great video thanks brother. Sounds like it's doing a great job and looks great. Keep up the great work see you in the next video thanks again brother

[@robingra2]

New friend here .beautiful tracker i love farmer . I only buy from local farmers. Thanks for sharing

[@karljacobson1575]

That disc has almost new blades on it!!!! Nice disc! Those bring good money.....

[@FarmallFanatic]

Yea, its been a good set

[@karljacobson1575]

Farmall Fanatic yes, I spent a lot of time back in the 60s discing with the same disc and a D-19 Allis!! Still farming, only with a lot bigger equipment.....

[@FarmallFanatic]

Very cool

[@MrKen-longrangegrdhogeliminato]

Old iron does a great job with that 13.6 footer, and such a sweet purring sound the M has.

[@molcs]

Interesting stuff Farmall!

[@joycemaguire4633]

Wow awesome video thank you for sharing 😊 💕👍 👍

[@FarmallFanatic]

Tfw! 👍

[@ChipsOutdoorChannel]

That disc does a great job! I have a small single-row disc. The frame on it broke. I usually have to make about 10 passes through clay to get the grass and such broke up.

[@FarmallFanatic]

Do whatever it takes to shoot a nice buck

[@a.j.leonard964]

That old school Farmall is a real beast.

[@TAHDAHFarm]

My disc is 2' narrower and I use a 3" cylinder. The manual talks about a 3" and a 3.5" cylinder all the way up to 14' wide. So you should be fine. Looks like the ground is working up nice.

[@FarmallFanatic]

The M wasnt gonna lift em with a 3"...at least I dont think

[@HamiltonvilleFarm]

Farmall getting it done!!!

[@NorthEastSaskFarmer]

My grandpa bought my farmall M new in 1948. He used it to pull a one way 15ft field disc, and a 10ft one way breaking disc among many other things. Now it just floats the yard and pulls and pulls my stone picker

[@FarmallFanatic]

Great to hear that it is still in use

[@Garden4Cheap]

hello Im coming over from Lynda's House of CHILL live stream. Great video

[@JerrysWoodShopandOutdoors]

That sucker sure looks to be running good buddy

[@HeavensGatesCherryFarm]

Great video, love them old tractors looking good!!!

[@66Oliver]

Ya got some good angles man! Lol. I’ll be doin this with an Oliver 1900 here soon! Screaming Jimmy...

[@FarmallFanatic]

I'll be watching

[@DorothysHobbyFarm]

I can watch that tractor for hours brother, keep on chugging along.

[@FarmallFanatic]

Thanks for watching!

[@PusaStudios]

Man those3 old international pull, Nice vid!

[@RODPIKERDRONESUK]

Great job well done thanks for sharing cheers 👍👍🇬🇧

[@Treetrimmer82]

I hit that like and now im watching #truesupporter #loyalty

[@larryraynor3311]

doing a beautiful job as have run a 480 IH disk harrow as just a step up from the 370 you have,,,enjoy your videos

[@FarmallFanatic]

Im lookin for a set of 350s

[@OnlyclaireJones]

Cool 😎 nice job on the big filed 👍

[@LivingtheDreamtv]

Awesome! You are in good shape for a bountiful harvest.

[@FarmallFanatic]

Thank you!

[@justmike57]

That Farmall was just purring right along there

[@wasblind4835]

Well heck. I’ve watched this for the third. Lol it came recommended. Lol I already watched it twice. Lol Why did it bring it to me again. I kept thinking this looks like the same field. Lol and when you talked about the ground might be wet, it’s like wait a minute. By the time you got to third gear I had to look. I already liked it and had left a comment. Lol So I watched it 3 times for you and YT. 😜

[@FarmallFanatic]

Odd 🤔...I just uploaded a similar video today

[@pahillbilly7455]

The M is doing a real good job pulling those discs, doesn't look like you need to work forever on that ground like some places

[@ronbootsfarm8266]

Tractor purring right along!

[@Cichlids23]

Don't know squat about farming but Im fascinated with it...new sub here.

[@mariascraftingcreation624]

Awesome job. Thanks for sharing...

[@AsmLoke]

Yoyo. I'm from TreeTrimmer82's live that you watching now. Just come to spport you ^_^

[@henryofskalitz2228]

love the sound of the old international tractors

[@carolyn2bfree235]

Disc away. I have been gardening like a madwoman

[@CartersEat]

I learn something new everytime I watch your video. Ohh.. the tractor pulls it.

[@ReapWhatYouSeauxLeJeune]

Good job man. Been plowing for years farm life only way to go. Thanks for the video 👍

[@FarmallFanatic]

Tfw! 👍

[@jankotze1959]

Whaoo, I can't believe the Farmall pull the disc, it is fantastic, awesome video

[@NigelNNoahHeretoShowYa]

Looks like it's working like a charm, coming out nice and neat even in third... thanks for sharing keep it going

[@jim1934]

He said it is in 4th. It should be in 3rd. LOL

[@JohnAvantiBK]

Good plowing and farming machine video 👍👍👍

[@CashisKingtrucking]

I wonder if tractors built today will hold up like that Farmall has.

[@tomjones8209]

Cash is King trucking , new tractors will never last like a old farmall .

[@scotthanson7888]

No, no one is going to care much about the imported plastic wreck with a fried circuit board. The M though , it will be around, working for a living

[@Pinkstonfamily123]

Fantastic job thank you so much for sharing

[@JunkyardTailgate]

What HP did does the M have? We had a 730 John Deere Diesel that would pull that disc and it was a 55-60 HP Tractor

[@FarmallFanatic]

40hp

[@HeavensGatesCherryFarm]

Looking good, she still has good pulling power!!!!🍒👍👍👍👍

[@johnnybrooklynNYC]

Awesome farming and plowing video 👍

[@hturbo1007]

You've got an impressive M, 12 foot disk in plowed ground and in 4th gear..wow!

[@FarmallFanatic]

3rd was the right gear...but it did pull in 4th. Still need an H or a C.

[@mx500a4]

That tractor sounds good, I'm used to my Johnny Popper.

[@FarmallFanatic]

I actually have a video on my channel of a John Deere B disking.. check it out it's pretty cool

[@IslandLifeFishing]

I really enjoy your videos because I know nothing about farming and tractors so every video is like school for me! Also your explanation is easy to follow too! Thanks for farm school brother 💥 BOOM 💥

[@FarmallFanatic]

Youre a great supporter man! Keep the fishin videos comin!

[@BrendaKline]

Very cool dude! I see some small and creepy “discs” on Craigslist. 😂 You drive that tractor pretty fast we should have tractor races in your field. 😆 Another great video sweetie!

[@FarmallFanatic]

You all healed up? Those tractor races can be a little bumpy 😁

[@BrendaKline]

Farmall Fanatic I go to the doctor tomorrow for him to check it and hopefully take the stitches out. Still hurts and I’m trying to stay off it but it’s on its way

[@FarmallFanatic]

Couple weeks

[@PSPRParanormalPursuit]

You make it look easy. I need a tiller so I can put in a small garden.

[@FarmallFanatic]

Im so far behind this year smh

[@kylecasetta4091]

So the cylinder was causing slow or hesitation on lifting? Have a m and a deere 10 foot disk that is real slow to raise up was thinking hydraulic pump but you may have given me a diff idea.