FARMER'S CAN'T MULTITASK!! BUILDING CORRI FEEDERS ADDING BACKING BARS, AND BÒ FALLS ILL

In today's video we are finally building our JFC Corri Feeders, were also adding a new backing bar to our cattle crush, fixing a con saw in poor shape!! and lot's more... enjoy
If you enjoy our video's then why not hit that Subscribe Button
Give us a like and comment at will
You can also follow us on
Instagram: / ifarmwefarm80
Facebook: / ifarm-wefarm-101507381...
You can also check out our new website at
www.ifarmwefarm.com
Donate Paypal paypal.me/IFarmWeFarm?locale....
JFC Products jfcgroup.ie/sectors/agri/
JFC Tidy Wrap bin jfcagri.com/farm-equipment/tid...
JFC Calf Jackets jfcagri.com/cattle/calf-jacket...
JFC Corris feeders jfcagri.com/cattle/ground-feed...
Agri Direct for all your agri supplies www.agridirect.ie
Prima Tec dosing gun www.agridirect.ie/product/pri...
SR Security for all your Calving and Home security CCTV www.srsecurity.ie
Tools in this video
Dewalt Hammer drill 18v XR amzn.to/39yEWM3
Sealey Cordless Ratched kit amzn.to/2Y7l2B8
For the kit i use you can purchase them
here, it won't cost you any more but it will support the channel.
Camera's
GoPro Hero 9 amzn.to/36CmKQF
GoPro Hero 8 amzn.to/2HYBnU0
Canon M50 amzn.to/34qUtJW
Drone's
I've been using drone's for over 20 years and i've had them all, these are the best.
DJI Mavic Air Original: amzn.to/33DNj5X --- Used in this video and highly recommended.
DJI Mavic Air 2: amzn.to/33Fqwa9 --- Faster, Better battery, Range and Image Quality.
Camera Mounts
Most of my outdoor Shots The Magnetic Camera Mount: amzn.to/3ko1Ngx
For my in cab chat's The Suction Cup: amzn.to/3javS1F
Used in all my video's "Simply Brilliant" The 3 way selfie stick: amzn.to/3o2wKc2
For them hard to get shots The Flexible Jaw Mount: amzn.to/2He69s7

[@JMFarming]

Those feeders look really smart! A great way to make some! Also really nice to see Nicole helping and taking an interest! Happy farming Adrian!

[@randolphbutler1832]

How neat are these feeders. Good to have a caring helper. Funny how reluctant they were to eat from it. Big difference w/ clean bedding. Thank you for sharing.🇮🇪🐄🇺🇸😷👍

[@MartinRodriguez-px3rw]

hi, good videos, i like you farm is very clean and neat, best regards from Uruguay

[@conor7187]

You're a complete contrast from my dad. You're so incredibly positive it's nice to hear!

[@dodge7679]

Great vlog A. Can't wait for next few they sound interesting

[@diarmuidsfarminglife4936]

Great video Adrian I am looking forward to see how you get on with the backing gate

[@padraiggeaney3167]

Brilliant informative simple idea Adrian can can be used anytime love your videos great ideas 👍

[@Dermo37]

Great video Adrian keep up the good work. The calves are coming hot and fast at ya too.

[@radekm9922]

I'm always amaised how tidy is your wee farm. Keep up a great job.

[@shanehealy9046]

Great video as always Adrian keep up the good work 👍

[@themayorofdipshittery3646]

Another great video Adrian. Those troughs are a belter of an idea. 👍

[@paulfoster3400]

another great video Adrian . Irish man living in oz hightlight of me and my partners week is sitting down on a sunday night watching with a cold beer in hand. Keep up the good work. 🤙🍺🍺

[@IFarmWeFarm]

This is always great to hear, what it's all about. cheers lad

[@ollywareing9419]

Thanks Adrian, great job as per 👍🏻

[@colmanlong1032]

Again brilliant video,you got thorough a lot on this one ,troughs a great job.

[@simonmurphy4411]

Great video Adrian thanks keep them coming 👍

[@matthewharnett402]

Brilliant video 👍

[@spideybrent]

Great video thanks for sharing.

[@oconnellsfarm811]

Great doseing gun have one troughs turned out great job

[@loweswaterhillfarminglaked6572]

Great video! Lovely bit of kit that gate is 😍

[@michaelstaunton1632]

Really enjoying the videos keep up the good work ✅

[@johnchambers1770]

A great job those antibacking bars by Barrets. As in the tractors and gerry6420 it's always the CASE 😜👍

[@markconlon1999]

Handy piece of Kit 🙂

[@seanmchugh4283]

Those anti backing bars are a great job, I know you have nice quiet cows so probably not an issue for you but be careful putting it on an old crush or up beside a welded spot on a tubular bar. If you have big heavy cattle pushing back on it it can collapse the tube and it won't slide forward and back. Happen us we had to replace the middle bar of the chrush with a heavier wall galvanised tubular bar.

[@raymondconnolly1435]

Great video keep it going 👍

[@jimmygm325]

NIce work Adrian. One thing you should get for the loader is a soft ride cylinder. It takes a lot of the hardness out of the loader ride. That spot in the video near the end where you were dumping the straw and the whole cab / tractor was bouncing, it takes all that away. Much less stress on the loader, tractor & operator. I cant recommend one enough.

[@georgerome5416]

Another cracking Sunday video Adrian and family😁👍 love seeing the updates on Instagram too . Your a family/man of many talents keep up the great work 😊👍

[@IFarmWeFarm]

Cheers lad 🤣

[@liammoran346]

Serious video 👌🏼👍

[@skilltrainingbyaasifmlone6970]

Very nice man

[@adriankennelly1338]

Don't mind them jd fellas🙃. Had to laugh when I saw the orange disc on the grinder. The farmers friend them discs. They last forever but god help you if you had a lot of heavy steel to cut. Them troughs look a mighty job. That case really looks super on her new rubber. Great video again Adrian, 👍

[@IFarmWeFarm]

Thanks Adrian 👍👍

[@craigdoig9486]

Interesting video

[@mariekav7766]

Great video we all have yo have the oul case

[@Horea_Suciu]

Makita lover, i am also😁 keep up the good work, i learned a lot from you 🥰

[@IFarmWeFarm]

Cheers lad 👍

[@juliefetcho7801]

Neat idea for feed troughs.

[@roberto33812]

Great video again I think this starting tractor thing has started something 🙈😆😂

[@darraghmartin52]

As always good video amagine if he made more vids🙃

[@cdemo1186]

Gerry 6420 wasn't the only one having the Craic about the case Adrian 😉 sorry buddy I couldn't resist 😂😂 Another great video on a wet windy Sunday morning, thank you 🖒

[@IFarmWeFarm]

It’s all part of the crack 👍👍

[@cdemo1186]

@@IFarmWeFarm couldn't agree more. If we can't have a laugh we're in bother. 😆

[@BirconuGaming]

Nice video 👌😊👌

[@gerry6420]

Those plastic meal troughs turned out well. Fierce handy job. 👌 How they finish.... love it 😂😂

[@callummcginn6184]

Great video👍. I am yet to try it but i seen someone with ht wire strained above the the length of the crush and hooked his dosing carton on it looked like a great job you should test it out see what you think. Will you have a video up in the middle of the week?🤔

[@georgiaannbicknell6129]

Adrian: please be careful how you use your open hand as a hammer. There are tendons that can be injured in your palm. Love that little battery operated tool you use to tighten the nuts on the bolts.

[@jix177]

Agree. Hammering things with your palm will come back to haunt you in a few years.

[@IFarmWeFarm]

I do agree 👍

[@patodwyer721]

Nice one Adrian. That's a busy show you're running there for sure but you're well organized. When it comes to the Case and John Deere, Gerry is Just Dreaming (JD)😂

[@adrianboyle5208]

theres lads in the jfc factory for years and they wouldnt make them troughs as handy looking to make as you did, but they use a jig saw to cut the pipe up its handy as long as you follow the line, you should get little 8 ml bolts and put them on the ends high up at the sides not at the bottom . there a grand handy trough to be fair to them.

[@Tractorguy-kl8xj]

with the dosing gun make sure you put the spring on the pipe as it helps hold it on to the gun

[@unaoconnor3628]

Think we spotted your Da doing a little cameo.

[@theghostofcornpop4175]

Well 🤙

[@seamusmurphy2877]

Well done grate video as ever. Would you think of a good wide forkes for cleaning out 😋?much quicker. Miss nicole will keep you on your toes 👍

[@louispower2853]

Excellent video love watching your channel, but now I must watch my college class about workshop safety 😂

[@IFarmWeFarm]

Been there done that 🤣

[@louispower2853]

@@IFarmWeFarm Bet you never had to do it online though, terrible times

[@ivandavidson5599]

Very clever chap, pity you didn't do vlogs on sheep.

[@jmurray236]

Ivan check out. The sheep game.

[@donalhickey8506]

I thought you could buy those troughs readymade as for the dosing guns I have tried a lot of them and the best of them which is the one I have at the moment is the njphilips gun which is excellent

[@anthony342]

hudson looked comfy

[@IFarmWeFarm]

As always 🤦🏻🤣

[@mauricecahill3385]

Ha.......still have to side with Gerard on the whole eady start story Adrian......cause I love to stir it up too🤣🤣🤣...loving the CCTV...but it looks like it's not going to be a fan of those dry roasted peanut and lucozade nights I used to love.....🤠🤣🥳 🙈🤣👍💪

[@mauricecahill3385]

BOOM!!!

[@FarmerP]

Good video again Adrian, Enjoyed that...... Boom 😄

[@IFarmWeFarm]

Ha ha, did you see my last video where a mentioned starting your Case Ian, your should be more or less the same as mine.

[@FarmerP]

@@IFarmWeFarm I start mine in the next one... You and Gerry get a mention, in fact Gerry got an extra one by mistake 😄😄👍. My bad. 😄

[@tomoneillagriphotography799]

Put rubber mats on the bottom of the gates in the calfing pen to stop the cows or calf to stop hitting off them and going under them.

[@michaeldorn5330]

We have them in Canada on everypen man gate so any cows won’t get stuck we call them no backs

[@hurleyagrivideos4919]

Do a Day in the life

[@IFarmWeFarm]

Done mate, one of our highest viewed video’s

[@matthewjones6831]

Do another one

[@thomascollins3773]

.....Please

[@lucianamariaalves3920]

Boa noite pra você meu amigo

[@aidanmckeown7533]

Great video i have made them troughs for ewes

[@IFarmWeFarm]

They’d be great for sheep in the field

[@tonybanahan3114]

Hi Adrian you should a get a big flour sieve for spreading the lime. just scoop into the bag of lime and shake it. we use it for lambing pens easier than using your hands.

[@IFarmWeFarm]

That would be very handy, thanks for the tip, think my wife has a good one :)

[@tonybanahan3114]

No bother thanks for reply

[@sandymcghee3328]

Awsome video nice 👍 looking calf’s have you got still a lot to calf yet keep safe 👍👍🇬🇧🇬🇧🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿😷😷🚜🚜👩‍🌾👩‍🌾👩‍🌾👍🇬🇧🏴󠁧󠁢󠁳󠁣󠁴󠁿😷

[@IFarmWeFarm]

You too Sandy

[@ruairimuldoon330]

That ending to the video 😂😂😂 another top quality video.

[@nirvairsingh1678]

good

[@johncrosse9964]

Now Adrian i hear you bad chatting john deere lets see your case start on the button my JD 2650 starts instantly

[@jonathanfarms2279]

Our case maxxum 5150 with 13000 hours start on the button every time you turn the key

[@jamiedorris3685]

Our 6320 John deere starts on the button

[@robertcarroll160]

Great idea what size of pipe is that?

[@danoohara397]

Hi adrian. Great video as always. How much a pop are the jfc yellow ends you used. Thanks in advance.

[@IFarmWeFarm]

I can’t mention prices on KZbin but just Google JFC Corri feeders and you’ll find them straight away lad 👍

[@jerryodriscoll3691]

Bit of a tip for you and fellas watching as I cant tell with the discs you use, if you put the disc on the grinder with the painted side or the side with writing on it facing into the grinder the discs last way longer that way (obviously with metal, plastic shouldn't be any bother to a disc)

LOL no.

[@jerryodriscoll3691]

@ what?

[@claetuswoodroofe4164]

Barrett’s also make a good head scoop as we got one a few years ago

[@IFarmWeFarm]

I’m gonna get one very soon

[@claetuswoodroofe4164]

@@IFarmWeFarm we have to dehorn 2 yearlings this week that got forgotten about but the head scoop is no use for that but brilliant for dosing on your own For holding cattle for dehorning we have a ring in the cement 5 foot in front of the crush gate that we pass a rope halter through to keep them steady and straight

[@mohameddeeb9305]

I am from Egypt i need to do farm like your farm your farm is very good ☺️👍🐂🐂🐂👍👍👍👍🐮🐮🐮🐮🐮

[@mohameddeeb9305]

Thanks for you ☺️☺️☺️☺️

[@andrewlynchclerkin7190]

You should try upload more than once a week the content here is great

[@elaineconroy9292]

I signed😀

[@Jp12987]

Great video as always. You pack so much in and always so positive. Do you get discount or free stuff for advertising products?

[@seamuspower5900]

What’s the angle ratchet you have ? Great video by the way 👍 “Gerry Boom” 😂😂😂

[@IFarmWeFarm]

Mikita Grinder, the ratchet is in the description lad 👍

[@robertkeane9887]

Them corrie pipe feeders are handy job have them myself but the only thing bout them is when meal goes down the holes and rain goes down in it then the smell is rotten and the feeders are light so they blow easy especially And also i seen video of gerry and john deere found it funny but of course everyone has there own opinion and your own tractors is always the best we have deutz tractor very happy with it but other people dont like it who cares as long as you like it 😂 Good video Adrian 👍

[@IFarmWeFarm]

It’s all a bit of crack between us, regarding the holes all you need to do is use a bit of expanding foam or stuff them with wool

[@robertkeane9887]

@@IFarmWeFarm good idea adrian well we have chnaged now anyway to feeding cob nuts so u dont need troughss were im living in galway in the hills and bits low land sheep need bit of feeding so we are using cob nuts there waterproof so the dont melt like ordinary nuts cob nuts can be thrown on ground which ideal for us because wind blows away our feeders overnight and youve got to fetch them half way across moutain the next day 😂😂

[@simongreen247]

Should have put the bolts 🔩 the other way inside out so there is no overhang to cut the noise

[@IFarmWeFarm]

I cut of the ends flat, and filed them too. The way the handles are made doesn’t really allow it to be done the other way. 👍

[@nicklad9463]

First

[@shaneprior]

Nice one Adrian, don't worry about your hand, i used to use my head to hammer in nails, never done me any harm, ah, what's my name again!

[@IFarmWeFarm]

I lad already told me he could pull the nails with his teeth😬🤣🤣. Is that a Johny Logan profile picture???

[@conallmurphy948]

What pressure washer lance do you use?

[@peterdooley2393]

Great video Adrian. Where did you get the ends for the half pipe to make the feeders

[@IFarmWeFarm]

JFC Ireland, you can order them in at most agri stores if there not already there lad 👍

[@noelgalagher2712]

Put a bit cow mat on gate bolt

[@herdyshepherd1411]

What make is your little battery operated socket wrench? - looks a handy tool

[@IFarmWeFarm]

Check out the video description

[@andrewnolan5825]

Adrian how do u put on seals on hydraulic rams I think your the man that knows

[@IFarmWeFarm]

There all different, done a few in my time, it’s quite straight forward but hard to explain here. Have a look on KZbin as there’s loads on videos on how to do so.

[@garymcbrien2853]

Drill a small hole in each rib understand to let water out

[@irishfarming9496]

Have u any thoughts of a new tanker an do dribble bar since the grant is there

[@IFarmWeFarm]

Yes down the line we will be looking for a new tank and possibly dribble bar

[@johnhaughian6120]

Could you please do a video on the ptz

[@IFarmWeFarm]

This week lad

[@pinic22]

Do you have a link for the non return gate? Cheers Great video btw👌

[@IFarmWeFarm]

www.barrett.ie , I think that should fund them. I bought mine in TeeMore engineering Co.Fermanagh

[@johnheaphy298]

Adrian......any chance you could give us a look at the latching system for the double gates shown behind you around 22:28 in this video ?

[@maguire5455]

Get dyspetil oral solution for the calf

[@IFarmWeFarm]

Perfectly fine now, liquid paraffin was the cure 👍👍

[@jaapbruijn1300]

How far away from your house is the other farm, where the hevers are?

[@IFarmWeFarm]

Very close, about a kilometre clear line of sight from my front door.

[@Rassd1345]

If ur gunna buy a tanker u should buy a rain gun nice bita kit

[@MF12000]

Maybe drill a hole in the middle tube of the crush behind the new backing gate, then you can put a bolt through the hole to stop the cows arse pushing it back done the crush, if that makes sense.

[@IFarmWeFarm]

I know what you mean but you don’t need to do that with these, they would go back no matter what force is applied, it’s the way there designed. There simply great

[@simanoliver5218]

Adrian . Where did you get the stop ends four the ribbon pipe ?can you let me no. Thanks

[@IFarmWeFarm]

There a link for them in the video’s description lad 👍

[@patrickcarvill9708]

How much do them Corrie troughs cost

[@peterkeaveney6209]

Where did you get the corrie pipe ends and what size pipe did you use cheers.

[@IFarmWeFarm]

It’s all there in the description, 300mm pipe and JFC Corri feeder ends, all agri stores should be able to get them

[@J-F01]

Hey a have a question. Do you have the slats and the feeding area level? Or is it feeding area little higher?

[@IFarmWeFarm]

Mine are level lad

[@mikeysky8917]

Is the radio at the out farm still doing it’s job with the crows? Ordered two radios myself. Bloody crows are now dunging on the handle of my silage grape. 😫.

[@IFarmWeFarm]

Yes but switching over to a nut form feed really helped too, make sure your radio is on a continuous news station. No music

[@markfoxton894]

Do you just use the small gate in your calving pen to calve your cows?have u have a proper calving gate or do you prefer just using the normal gate??

[@IFarmWeFarm]

Ya I much prefer the gate I have, very safe and really handy. A lot cheaper too

[@markfoxton894]

@@IFarmWeFarm do you keep it closed with a chain?

[@shaneflynn7676]

What size pipe did you use?

[@davidrigby1543]

What’s happened to the demo of the log splitter pls was looking fwd to seeing her in action

[@IFarmWeFarm]

This Sunday 👍

[@mjbj3001]

Do you plan to put a roof over manure heap area I need to upgrade mine and looking for your opinion on it if u get a chance

[@IFarmWeFarm]

No as it gets moved from there into a bigger heap in a field corner ready for speeding later in the year

[@MrSherry2011]

Is there anywhere around Cavan that sells that backing bar or did you buy it from Barret direct?

[@IFarmWeFarm]

All Co.Opp’s would have them

[@MrSherry2011]

@@IFarmWeFarm Nice one, cheers

[@jix177]

That's quite a calving production line! What powder do you spread in the calving pens?

[@IFarmWeFarm]

Just lime like to kill off gems, and it drys it up faster to.