THE ENGINE IS OUT!! | MF 1200 PART 1

In today's video, we are finally back in the workshop and working at the MF 1200. We have to get the engine out so that we can get easier access to the belly of her.
Hope you enjoy, any questions hit me down in the comments below, thanks for watching! G'Luck
Please like and subscribe for more. Videos every Tuesday, Thursday and Sunday.
FARMER PHIL Merchandise:
www.stewartfam...
Stewart Family Farm - Home produced beef & pork
www.stewartfam...
Telephone: [phone]
Email: [e-mail]
EirCode - N39 C6V6
Also, head over to my amazon storefront to check out products that I use and would highly recommend: www.amazon.co....
paypal.me/FARM...
Lickd - Licenced KZbin Music : lickd.co/r/far...
Business enquiries: [e-mail]
FACEBOOK: FARMER PHIL
INSTAGRAM: farmer_phil_135
TikTok: farmerphil135

[@luckystar4356]

Father Phil is some man for one man. His mechanical know how is astounding. Nasa should get him in as a consultant. 🚀 😆

[@lukagiltrap77]

I hope these fine young gasuns appreciate some day just how lucky they are to have a man like Father Phil to learn from and mentor them. Having a man like that as your father is like winning the lotto very early in life - it should set you on the right road from early on. Fr Phil Appreciation Society here! Also, please tell Uncle Ian we were asking after him, and wishing him well. Regards from a Monaghan man.

[@brianmullins5824]

Well said

[@kt3537]

Great video...I'd say there will b alot of rooster's crowing by the time it's finished 🤠

[@billyroberts6727]

Love these shop videos so much and can’t wait to see this old girl out working

[@jimpolk]

Great video. Seems like Father Phil is driving the bus as far as wrenching. Good mechanical knowledge.

[@DianeD862]

Wonderful we just love farmer Phil and Father Phil.Good luck with the machine.❤🍀🍀🇮🇪🇮🇪

[@adriansheehan360]

Well Done too Farmer Phil, Father Phil and Bro, Great too see a start on the 1200, Looking forward too seen the progress.Great Content As Always.

[@kevinryan3475]

Nice to see father Phil back on the spanner’s

[@michaelstaunton1632]

Team Farmer Phil & Co in action …. Mighty job …… thank god for the bleep button !!! 😂

[@roberthiggins6401]

Father Phil reminded me of evenflow when you were lifting the engine out.

[@petertiffney4413]

Nice job lads and so nice to see you all on the job together

[@timizod8966]

Brilliant to see you working on the 1200, guys. Please, please 🙏 spray her back to her 1200 colours. You all make such a brilliant team.

[@MrShanbla]

Lovely stuff Phil, good to see the 3 amigos flaking away at project in the workshop. Don't think father Phil was the happiest camper when ye lifted out that engine 🙈😅

[@pierce.ireland]

Juniors Hair has to get a mention. Looks Awesome.

[@mistaken_stranger8343]

Definitely will be an interesting project. Wishing yous all the Best.

[@homey3051]

Thanks for sharing your vid’s with us!

[@boylantalkssport23]

Brilliant as ever lads, especially love seeing the old gear, but I must say that loader is a seriously nimble bit of kit for the size of it

[@johngouldsbrough1418]

love to see farther phil working on the tractors he deserves a medal working with you to lol enjoyed the video

[@markphilpott9531]

Great video Phil jez yer father is a mighty man 👍

[@calftobeefwexfordpaul1482]

Great content men keep up the good work, father Phil knows his stuff

[@martincraig1974]

Great to see you all having great craic 💪all the very best with the 1200👍👍

[@rosstheoliverman]

I love the old 4x4 tractors! They’re often overlooked in the collecting world which is a shame because they can still do a days work. You can usually buy them very reasonable. I bought my White 4-180 for $4000 and I think it’s been a great deal so far.

[@michaelhealy7964]

Getting on well

[@dermotward6540]

Great stuff, progress on the 1200 at last. 👍👍

[@Maxxum-farming]

Plenty of roosters 🐓 in todays video 😂. Thought my farm was the only roaring match when something big was been done. Great videos. 👍👍

[@andythewelder6181]

It's good to see bro getting stuck in and it does come across that he is enjoying it

[@johnplatt8369]

It's going to be great watching the 1200 rebuild,,, and even better hearing you start her back up and of course the test drive..... Do you think we will see her in action next year??? Fingers crossed this is going to be great 👍👍👍👍👍👍👍

[@antmorgan5255]

Great to see ye got the pallet of time looking forward to seeing lots of things getting fixed. You and bro are learning from the mistro .👍🤠🔨

[@colmanlong1032]

brilliant video,,some GAS craic in that shed.Father Phil a genious.

[@ianhaggart1438]

What a laugh 😃 to me to you 😆 now remember the plan . Don't write it down the plan Then the plan can change at any time when I see the plan not working. Making the plan look like it's working 😉🤪. Cracking job boys.. 👍🏻 bro your a star in the making 😁. Stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@jimmy75256]

Nice start

[@williamdonohoe6842]

Ye guys are absolutely priceless 😂, horrid bit of craic, start of the video with Father Phil & bro was brilliant, and the back end fumes, normally around ant house

[@eoghanhayes7699]

Wurth penetrating oil will make wd look like rainwater and ditoil spray will make the wurth look like water, expensive tack but seriously good for the important jobs like the tacho

[@agoodbluewilldo8359]

Who is this bro fella... he will be a mechanic soon

[@sampowell6240]

12:25: Knew that was coming ! LMAO

[@Wee-Nico420]

I actually was hoping you would do a video on this tractor to I love the 1200 a faerce machine

[@gearsandtears7643]

Father Phil be a right man with guiding a flock of sheep 🐑

[@George_Ren]

I'm so glad I was sitting down.... Bro NOT in shorts! It must be winter. 😆

[@Dave-jm5yo]

Great progress.

[@case4006]

Looks like a two Guiness day

[@sandymcghee3328]

Great video again Phil nice to see bro farther Phil is the boss 👍👍👍👍

[@Gearoid35]

Nice video lads that was fun

[@Gadger2109]

Hey Phil, your father mentions a ?trachometer cable in the video at 1:05. I have a Perkins 6354 at home, just wondering would he know where to get a cable? 😊

[@calumanderson5617]

Not sure if their still on the go but there's a company called , Speedograph Richfield LTD they made a tachograph cable from scratch for my mate's Leyland 302 if you still have the remnants of it for a pattern they do all kinds of cables car's trucks, ect. 👍

[@johnharte4857]

Lads year have a great teacher in the old man 👍👍👍👍👍

[@ianward3943]

Great to see work start on the 1200. Will you be doing it full justice and putting it back to Red? 👌

[@ronanwalsh7024]

Lads what sort of connection is on the engine for the rev counter cable?... I have an 1135 here with a combine engine in it and the cable is not attached because there's only a round shift on the engine.

[@alanobrien1817]

Making a start is half the battle...

[@dalesfarmer2430]

some cockrels in that shed that night boss lol

[@caffrey9762]

Good team work 👌. The engine looks smaller when it's out

[@kcahill2777]

Great stuff 👏👏

[@shaneduddy]

Great stuff chaps, looking forward to see this ongoing process.

[@user-rw2um8ro2p]

Great video Phil

[@himself2]

Go Father Phil,is there anything he don't know

[@brianovington]

You have a spare perkins engine in the old venerie loader. Would it fit

[@gerardmcdonald2534]

Love this type of video

[@patrickaherne3598]

I hope you're going to re-spray it in the original red.

[@michaellorio9774]

re bonjour belle vidéo et du beau boulot 😍👍👍

[@michaelconroy7445]

Fantastic video I could watch you and your da all day ye are hilarious 😂, Cant wait for part 2.

[@ciarainbridgeman2137]

Will ye spray it Phil when it finish

[@OOpSjm]

Not going to hone the cylinders? Replace seals?

[@ChrisTheIrishGamer]

gas he not in shorts lol 😅😅 I AM IN SHOCK

[@aidanbrennan7389]

Have you the Michelin Tyres ordered for it? Greetings from Dún Dealgan...

[@Alexwalsh175]

When will ye do the maze

[@jackbarker7315]

What have you done with the multipad joystick you put on your Instagram story a while back?

[@johnmcdonnell5372]

Some craic. If you need any filters or oil for the 1200 im happy to support. REDMAC DONALDSON FILTERS.

[@Wee-Nico420]

What color will you respray it red or yellow

[@brucerae5522]

In the bin or call the scrappy 😂😂😂 what Perkins is that one ?.

[@georgedoorley5628]

3654 -4

[@georgedoorley5628]

sorry its a 6354-4.........

[@brucerae5522]

@@georgedoorley5628 hope they upgrade it to the 180hp version not sure the trans will handle it but.

[@Modlendingen]

Finally :) Looking great so far, how's Uncle Ian these days? :)

[@OOpSjm]

He was in the combine videos

[@andrewfreer5797]

Need a v8 perkins.

[@declanf9184]

That’s a torture off a job for a old tractor

[@truthplease4868]

Straight to Roddy Wiltons

[@alexthomson719]

Did you do anything other than hold the camera I see you didn't run the coolant out ?

[@tommykarate5126]

He's a big KZbin star producer now 😂

[@greggroome2791]

❤️🇮🇪👍🙏🙏

[@alexthomas637]

🤣🤣🤣🤣👍

[@joemcardlester]

No harm to you Phil, but u didnt make life easy for Father Phil when lifting the engine out. Great video and content as always.

[@phil6465]

I imagine with the noise of handler it wasn’t easy to hear the directions.

[@martincraig1974]

He obviously couldn't here father Phil 👍

[@Johnnycambell]

I was kind of hoping for something a bit better than this

[@adrianshjadesheehan9991]

Father phil is unreal

Why don't you power wash it then use the compressed air to dry it.