Farmertec 372xp Pro Upgrades Carbon Fiber Holzfforma Chainsaw HUS 372 with pipe review

New farmertec 372 upgrades, and differences are shown here in this video. Better revisions have been made. Hopefully this will last longer and perform better than the previous models, and of course I had to add a Cpi Racing exhaust pipe.

[@Bigcheif360]

It always gets me how a simple upgrade can make such a difference. 😎👍

[@dynojoemods2764]

That dipped saw sure looks good!!

[@rockymountainchainsaw]

Yeah...to good. Almost don't want to use it. Just want to look at it on the shelf with the black pipe.

[@timberslasher4899]

I have bought more than one assembled orange 372 with the high rise filter and had them shipped to NC

[@jamiedalluge9472]

We never had any luck with them saws but apparently their getting a lil better

[@Ketis1985]

I believe those PRO models have legit Walbro carburetors since Walbro has factory in Tianjin In china. I just got 1 of those g372pros.

[@matticus6339]

Man it would so AWESOME if Holzfforma would do a clone of the Husqvarna 2100CD.

[@rebeccarobinson7024]

Ya dipped saw looks awesome been trying find online to buy and no luck

[@swere1240]

that view in that backround when u were cutting is great man. all there is around me is corn and more corn haha

[@rockymountainchainsaw]

Come visit anytime! We always have wood and saws.

[@arturartur737]

Hello . Husgvarna 372 xp ..holzfforma 372 xp . SUPER SUPER SUPER SUPER SUPER SUPER SUPER machina ..beautiful . Pozdrawiam z POLAND . 👍👍👍👍👍👏👏🌳🇵🇱

[@GozonTheGonsarian]

genyouwine wallbro nuttin but da bestest

[@frankz1125]

I just got my G288 a couple days ago. Havent started it yet but it came without a scratch on the box. Seen the hydro dipped when I bought mine. Quite a bit more expensive for the dip. Cheers

[@alabob20]

It's more that just a color scheme. They come with a Walbro carb, Italian Nikasil plated cylinder, Meteor piston and Caber piston ring. I just received mine Tuesday and did some mild porting on it. It's pretty decent.

[@kylecromp319]

the only problem with the pipe is the narrow power band. If you get off the pipe it dies. i like it but a good port job broad power band

[@WeSRT4]

The prices have crept up steadily. No longer a screaming deal IMO.

[@steelcityperformancesaws]

what a view!!

[@dougmiller2459]

Where did you get that pipe. Or would you make one and sell one?

[@rockymountainchainsaw]

Got it from CPI racing yes they can build you one. Email [e-mail] for more info.

[@bretthallenbeck4724]

Two questions... is the fuel mix really 25:1 like the specs say? And the blue/orange vs Pro is about a $150 difference. Functionally, is it worth the difference?

[@DaveJohnsonad5nm]

The blue and orange are the same saw. The Pro is well worth the extra $150. With the Pro many of the second rate parts have been replaced with much better quality.

[@yungsmile7546]

For initial set in I used 32:1 for two tanks and will be running 40:1 indefinitely. 25:1 is too much, because it will build too much heat which can croak the saw.

[@DaveJohnsonad5nm]

I use 40:1 and have had excellent results for 40 years now. I would think at 25:1 you'll make more carbon in the cylinder than wood chips on the ground.

[@alanmeyers3957]

⁠@@yungsmile7546really, have you tested that theory? How about 50:1 for break in and then 40:1, what do you think of that?

[@miketyson8658]

​​@alanmeyers3957I 'm currently running 50:1 trufuel in mine, but I just fired it up for the first time today.... will let ya know how it goes. Wish me luck lol

[@larrywarner9314]

Wuts one of those white 372 pro saws go for ?

[@NothingButChainsaws]

Port that cylinder then run it, sounds freaking awesome with that pipe!

[@rockymountainchainsaw]

Yes hopefully next week I can get it ported up. Really wake it up.

[@Bsetzd]

What kinda rzr. Do you have lol. I got the same hoodie.. mines a 2018. Turbo. . I. Love it.

[@rockymountainchainsaw]

Oh dang. You have a nice one! Mine are old and beat up.

[@redeagle6842]

Do you have any of the g288?

[@marktcso]

Do you sell saws? If not, who do you recommend I buy one from?

[@rockymountainchainsaw]

Yes I do. Email [e-mail] for more info.

[@jimssawsnstuff8903]

All I can say is they look ok. Ive had a general lack of service/support. Nothing but issues when trying to get them to deal with damaged / broken parts or wrong parts being sent. Durability is very lacking in crank cases, as the crank bearing pockets stretch and won't hold the crank bearings, results in seals failing, air leaks seized saws, plastic is pretty brittle and breaks easy, screws are soft and break, or the holes for the screws strip out very easily. Might look good in pics, but Neotec 372 and 066 are more durable and better built for the money. Afleetcommand has done tons of videos on their stuff over the years, might be work a look before you spend the $ on these. Good luck.

[@alanmeyers3957]

People are always looking for a deal, truth is, these are junk compared to Stihl and Husqvarna.

[@EcSsAwS]

Granted that's a new saw. But damn...that's depressing to watch it cut

[@EcSsAwS]

@@jason3211 I don't like the Stihl clones. I have a bunch of the husky 372 clones. Including the pro model couple real huskys too I plan to make a video about longevity and quality of the saws. Since I've had one 372 clone for well over 2 years and 70 plus gallons thru it

[@jtaylor9355]

Who can i call to get one of these saws?

[@rockymountainchainsaw]

Start by emailing [e-mail] I have a few left here that I can sell.

[@baldwinracing28]

Jes Ray at smelter saws

[@cowcatcher9186]

I’m waiting on my 660 pro to arrive. I ordered Jan 13th so I’m sure I should quit holding my breath. Lol

[@rockymountainchainsaw]

They are pretty sweet. Worth the wait.

[@cowcatcher9186]

Rocky Mountain Chainsaw I too just buy new stuff to give the kids some boxes and bubble wrap to play with. I look forward to your 660 video. I’ve been on the fence with buying one of these saws for a few years and the upgrades convinced me on this pro model. How long did shipping take on yours? Thanks

[@rockymountainchainsaw]

@@cowcatcher9186 took a few weeks, I ordered 20 saws. 10 of each pro series models. Along with lots of other needed parts. The 660 has a nice protective plate on the bottom that I wish the 372 had.

[@miketyson8658]

​@@rockymountainchainsawmy 372 pro came with the skid plate

[@yungsmile7546]

"A few things they don't tell you about it". Oh yeah, like the anemic oil pump and junk chain adjuster on my new G660 PRO? Farmertec would have done much better to resolve these two longstanding problems rather than the pretentious faux carbon fiber paint. They've lost me for future purchases and recommendation.

[@andrewotero1972]

Not baby looker!!! nice spruce logs! It's pipy!!!!!

[@justinterrell9555]

Can I purchase just the full wrap handlebar

[@rockymountainchainsaw]

Yes you sure can! They have different colors if you know what your looking for. Black or gray.

[@justinterrell9555]

Will it be the full wrap that's just a little shorter than the xtorq or is it like the xtorq full wrap? Do you possibly know

[@justinterrell9555]

I tried looking it up but I can't find it on the website what do I need to put in to pull it up? Thank you

[@erikb8172]

@@justinterrell9555 Hi Justin, I,m guessing that the full wrap they offer would be like the ones from the NON Xtorq models since their G372, is a replica of the Original 372 XP,s( Non-Xtorq). Good way to tell the difference between an original 372 XP and a 372 Xtorq is the decompression valve comes out the side of the cylinder head on the 372XP Non-Xtorqs and on the Xtorqs the Decomp comes out of the top of the cylinder next to the spark plug on an angle. Hope that info helped.....

[@justinterrell9555]

Yeah I have 2 original editions 372s if I put a full wrap on one I just didn't want the one for the xtorq because it's alittle taller not that it really matters but it does to me I guess. Lol.

[@AbdulAziz-eo8er]

Bisa kirim ke Indonesia kah bro

[@nathanchild3256]

How’s the new 660?

[@rockymountainchainsaw]

Pretty sweet. Im in the middle of editing the video. I should have it posted here in a day or so.

[@nathanchild3256]

@@rockymountainchainsaw awesome, I’ll keep an eye out for it. It’s been a toss up between a 660 and 444, the improvements on the carbon models maybe be the selling point for me

[@buddysumner4022]

What is the price on the pro model

[@weirdowolfstudio5409]

Watching the cutting of this saw is painful

[@vasilegirigan5096]

💯💯💯💯👍👍👍👍🤝🤝🤝🤝

[@hiradhojrai2231]

Hawu mani parayc

[@tomsteinmetz1215]

Inner dog does not belong there..Hope you figured that out before the chain does.......

[@mattphillips4260]

i can not stomach the idea of buying from china is the bad thing and the other thing is the crazy gas oil mix here we have the 40:1 or more common 50:1 mix these blue saws want a 24:1 mix i think it was at the time i looked at them 3 or 4 years ago

[@metalandwood4u]

They dont "want" any oil. 32 and 40 ratio work perfect after a bit of a break in. That 50 mix on any saw can be bad.

[@clintbliss2046]

Boy that was sooo not impressive

[@user-yp3lm7tj5i]

👍👍👍