For your next project mix pigment in Part 2 first. Don't use a power mixer as that reduces your working time tremendously. Use short nap roller. 2 coats maximum. Pour out whole container of mixed product to spread it out as fast as possible, the more you leave in the container by volume the faster it will get hot and start to kick. Never mix more then you can apply within 10 to 15 minutes.
@Samuria877 жыл бұрын
Fasco Epoxies well wish I would have known that,but it turned out great
@johnadkins59966 жыл бұрын
Fasco Epoxies does this stop leaks?
@getschwifty84496 жыл бұрын
Your company is the best I bought this because of him. The best thing I have to say is have a good sanded clean surface I also used Por-15 cleaner degreaser and Por-15 Metal prep. I used it for my 1973 Sears 14 foot Aluminum boat, I put 2 coats on.
@CoreyANurse6 жыл бұрын
Fasco Epoxies Hey can you please provide me with any tips on applying on a wooden hull?
@KamalaKackles4 жыл бұрын
[Get Schwifty] Has it lasted?
@michaelcamp55133 күн бұрын
I was in 5th grade when this album came out. They did a cover of the 70's song "Come on Feel the Noise" by British pop/rock group Slade. I saved my money and bought the Record. Other tunes on the album that I loved as a kid ... Run for Cover, Slick Black Cadillac ... great Album. Slade came out with an album not long after Quiet Riot hit with their song. Check out Runaway by Slade.
@7mm08man6 жыл бұрын
Thanks for making this video. I just picked up an old Bassway 1848 jon boat and am thinking about coating the bottom like you did. I already tightened the leaky rivets and am about to repaint the wood transom next.
@wdbbragg8115 жыл бұрын
Ok, I bought this for my 12' Jon boat. I mixed my colorant in part 2 first then added part1and mixed. Applied with roller and a plastic spreader. 2 coats and it came out great. I really appreciate your videos. My old boat looks new again. And no leaks
@ticesine65894 жыл бұрын
What product did you use the same one?
@jacklowe37884 жыл бұрын
Is that 2 coats with one batch or two separate coats on different days?
@gofish22332 жыл бұрын
The corrosion pitting from the trailer bunks is usually caused by pressure treated boards. The chemicals react with the alum. Only the regular boards should be used.
@mak90rocker865 ай бұрын
Awesome video. I'm fixing to do a 16ft smoker craft in this stuff. Hope it goes well. Thank you for this video
@TheChristopherBaker7 жыл бұрын
Thanks for the video and warnings about the struggles you had.
@Samuria877 жыл бұрын
Chris Baker yea it's a quick process
@getschwifty84496 жыл бұрын
Thanks for doing this video I bought this last year for my boat.
@Auntyweehaa4 жыл бұрын
hows it holding up?
@getschwifty84494 жыл бұрын
@@Auntyweehaa great so far. Had it flipped over during the winter, I did notice that one area that the sun was beaming down on had chipped. I figure it was because of a little dirt so cleaned it, and reapplied. Hoping to get it out next month.
@wdbbragg8114 жыл бұрын
This was applied two coats. One each day. Holding up great. Very please with results
@WellStudied4 жыл бұрын
JUST WISH PEOPLE WOULD LEAVE ROOM FOR AN UPDATE HOW IT WORKED AFTER IT HITS THE WATER!
@Samuria873 жыл бұрын
Sorry I sold the boat
@RustyNail58563 жыл бұрын
Great job. if you would like to make the job go faster steel wire it , that works great. and remove all the stuff off the boat first, and mix the color in the pint and mix it up first it, then add the harder and finish mixing it. that will give you a little more time to work with.
@captgreg33194 жыл бұрын
We use Steel Flex on our Airboat’s also a product called Frog Spit ( lol ) this stuff is great and hard as a rock, DO NOT USE A MIXER.
@mangravy20006 жыл бұрын
Could you give us an update? Show the bottom and any gouges from hitting things or grounding.
@Samuria873 жыл бұрын
Sorry I sold the boat,
@noelmunson25647 жыл бұрын
This was great! Thanks for posting it! Helped me with my Gheenoe restoration.
@mrhuntinjunkie4 жыл бұрын
Awesome news. I'm in the middle of a Gheenoe refurb.
@billdean19843 жыл бұрын
Man l won't you to you ready helped me out and save me alot of money l didn't know about this inteal I saw this thanks alot
@Samuria873 жыл бұрын
Glad I was able to help you!!
@timstricker78502 ай бұрын
Good information to know
@jasonboyington43456 жыл бұрын
Thanks for the video as I'm about to do a 16/48 lowe aluminum boat. I want to do the entire outside of the boat. Going to have a buddy of mine sand blast it first. The thing is got to remind who ever does the sand blasting they need to remember you can NOT blast aluminum to hard or you will loose hull thickness as aluminum is very soft lol.
@tellrich294 жыл бұрын
So how is the Jon boat holding up since you applied the sealant.
@Samuria874 жыл бұрын
Sorry, its has been great I saw it a month ago and zero chipping, zero leaks
@jamesdeanpresley694 жыл бұрын
Thankyou brother
@KamalaKackles4 жыл бұрын
How did it turn out? Are you please? Any loose rivets or leaks
@razerburn42163 жыл бұрын
Just did that to my job boat did the water test no leaks I put 2 coats on I will see how it does on the water
@hectormacias53953 жыл бұрын
How many qts did u use on your boat for the 2 coats?
@razerburn42163 жыл бұрын
@@hectormacias5395 so I have a 10ft 48 I used 2 quarts
@bufunga6 жыл бұрын
Hey buddy put up an update. Thx
@jimsque7 жыл бұрын
Great video! Thanks!
@JacksonNoble266 жыл бұрын
Hey man do you remember what pigment color this was? Looks like a forest green almost. I'm looking to order some but I want more of an Olive Drab color..
@johnnelson82714 жыл бұрын
Nice job
@ryanisley39534 жыл бұрын
Before you put that on. Did you have any cracks were rivets are. I bought a Bass pro 15ft tracker jon boat in 2010 2012 plus I'm running a 15hp mercury 4stroke.i used boat to install boat lifts all over lakes in oklahoma so your talking about putting around. Well this year I'm not installing lifts.in tje years ive owned this boat ive put flex seal paint bottom & inside jb weld on a crack it held for a little bit. Now I'm scraping the flex off the bottom cause it's flaking away ive noticed around rivets thier is cracks oh ya also a weld in the seam has a big --- crack about 8 10inches long. I guess bass pro is cheap on boats but they are exspinsive.im not sure how all this has happend to this boat from pushing lifts. I'm talking trolling speed.
@guesswho15657 жыл бұрын
Thanks for video.
@Samuria877 жыл бұрын
Guess Who your welcome
@kingtut59233 жыл бұрын
Next one he is going to sand blast it , wow I want to see that.
@Samuria873 жыл бұрын
I am going to do another one soon make sure to subscribe
@AceofSpadesKingdom6 жыл бұрын
Nice bro
@marty46196 жыл бұрын
Hei Blake, how bout some update on your steelflex 2000. really curious hows that turn out so far. Thanks in advance
@Samuria876 жыл бұрын
marty4619 it's has healed up perfect.. love it
@trevormetcalf30346 жыл бұрын
Could I use this on aluminum???
@tedsell14554 жыл бұрын
The boat is aluminum 🐡
@Perez_Pesca_pfc4 жыл бұрын
nice video men thank you men
@mainenorthwoodshunter32655 жыл бұрын
Looks great, I have a 14 foot by 36. Do you think 3 pints will be enough for mine? Is the stuff expensive?
@Samuria875 жыл бұрын
Yes absolutely
@davidpate22373 жыл бұрын
Where did you get it and how much was it very informative video
@Deerslyr815 жыл бұрын
So how did it turn out/did you need another coating?
@tedsell14554 жыл бұрын
Any body else want to move the drill ? Thanks for good ideas 💡
@Samuria874 жыл бұрын
Move the drill?
@TI149284 жыл бұрын
What size is your jon boat?
@razerburn42163 жыл бұрын
im doing mine do think it will still stick to a primed jon boat
@markofexcellenceconstructi27765 жыл бұрын
Would this product be good to paint on a fiberglass water trough for a water fall ?
@vicmorrison81284 жыл бұрын
Enjoyed the sh=t outta this video. Thanks.
@unknownsounds69533 жыл бұрын
let out a sneaky fart out at 21:12 lol
@Samuria873 жыл бұрын
No lol
@unknownsounds69533 жыл бұрын
@@Samuria87 lol no one well know
@chrislowkeylisby51385 жыл бұрын
So I just bought a jon boat we are currently stripping it down to paint it but I we did discover some leaking rivets would I be fine just covering them all with this to stop the leaking?? Also do I still have to Primer over the thing or should just paint over it?
@danpatrick90805 жыл бұрын
I'm doing the same. No primer. Remove all the paint. Sand down with 24 grits. I even sanded down old jb weld. Clean. Apply
@haroldtunnell56313 жыл бұрын
I watch your video and did every thing you did except adding paint is this why it harden up real fast?
@Samuria873 жыл бұрын
No, probably mixed to long of a time.. it dose not take long to harden,
@danmcginn7725 жыл бұрын
whats wrong with a paint brush?
@williamquam2953 жыл бұрын
What size boat was this?
@Samuria873 жыл бұрын
14/36
@mt-nv4jd4 жыл бұрын
You said 30 SF and later said 30 SY. Which is it?
@sstatic60935 жыл бұрын
can u use it on your boat if its already painted on the bottom?
@Samuria874 жыл бұрын
yes just prep correctly
@jimmycrocker81186 жыл бұрын
where did you purchese the steel flex
@fiberglasssupplydepot51324 жыл бұрын
fascoepoxies.com
@johnadkins59966 жыл бұрын
Will it stop leaks?
@Samuria875 жыл бұрын
Yes
@TI149284 жыл бұрын
Were the two pints of steal flex enough for you Jon boat?
@twistedjigco.5483 жыл бұрын
He said he used 2 pints but had a 3rd to thicken up the thin spots 🤙🏻
@rogerflamesfan7 жыл бұрын
How did boat work out on the water. No leaks?
@Samuria877 жыл бұрын
Tim Commerford lol it's still in the garage.. I have been busy. hope to have it next month
@Ryan-rq8hs5 жыл бұрын
Blake Sanders I just watched this today. I see you replied to Tim Commerford’s question about being out on the water a year ago. May we please have an update as to the status of your boat with a video of it on the water. In this video, you said something like you couldn’t believe someone hasn’t done a video like the one you were doing. Every video I watch about fixing Jon boats/aluminum boats, no one ever shows the boat out on the water to prove their handy work is what they claim it to be. I’m not hating. I’d just like to see if your method really works before I go ahead with your informative video. It was a great video
@ticesine65894 жыл бұрын
What product is this exactly? , there are a lot on the site , thanks
@castkid7 жыл бұрын
How much did you have to use to coat the entire hull well? 1 quart or did it take 2?
@Samuria876 жыл бұрын
Sean Behnke took 3 quarts
@anthonyhernandez76046 жыл бұрын
How is it holding up and is there any concerns with this product?
@Samuria876 жыл бұрын
Anthony Hernandez holds up perfect
@davidlewis95726 жыл бұрын
Looks good , how did it seal up
@Samuria875 жыл бұрын
Really well
@bradhuskers3 жыл бұрын
Can I. Add a layer of poly eurethane over the flex seal? Or is it unnecessary?
@Samuria873 жыл бұрын
Not needed once it cures it would not stick due to the Teflon coating
@jeremiahlavoie79983 жыл бұрын
Hey what color did you choose? Just the basic “green”?
@Samuria873 жыл бұрын
Yes od green
@jeremiahlavoie79983 жыл бұрын
Thanks. They have a green and then a dark green
@robertmercer424 жыл бұрын
What products did u use and where can i get them
@weeverob Жыл бұрын
like Bondo, if you want to slow the curing time just use less hardener. in addition, the chemical reaction will be much faster if you are mixing on a hot day.
@Samuria87 Жыл бұрын
If you do not use the correct amount of hardber it will not cure correctly, if you use to much it will over cure causing it to fail later .. yes temperature has a lot to do with it
@weeverob Жыл бұрын
@@Samuria87 it will cure perfectly if you drop the hardener 10-20% if you’re not in a hurry.
@dreamaviation3812 жыл бұрын
Is it durable for beaching a boat?
@joereynolds17675 жыл бұрын
Where can I order stuff and what does it run
@jerrykey90534 жыл бұрын
What was the name of the product
@paullahocki25392 жыл бұрын
How has the steel flex handlled long term ?
@Samuria872 жыл бұрын
No longer have boat but lasted a long time
@ryanisley39534 жыл бұрын
With All that flex seal & jb weld it still leaked
@Samuria874 жыл бұрын
nope
@ChannelMarker4 жыл бұрын
How much would I need for a 16ft boat?
@Samuria874 жыл бұрын
one gallon
@ryanisley39534 жыл бұрын
I'm needing some help
@Auntyweehaa4 жыл бұрын
update?
@Day12My4 жыл бұрын
what is a pient?
@aftereffect48325 жыл бұрын
A little on the job education, "how to" video.
@straightwhitemale5753 Жыл бұрын
What kinda of roller is that?
@Samuria87 Жыл бұрын
Just a NAP roller from lowes.. nothing special
@straightwhitemale5753 Жыл бұрын
@@Samuria87 Thanks. I heard to use lintless. I'm about to do my boat is why I'm asking.
@jerrynewberry28235 жыл бұрын
Damn no wonder that set up on you. You have to be the slowest person I've ever seen You didn't clean off your extra material before you started, wasted time! That stuff started setting up as soon as you mixed it
@billdean19843 жыл бұрын
Were do you get it
@Samuria873 жыл бұрын
"Fasco 9XN2000 Super Slick Epoxy Bottom Coating" fascoepoxies.com/Fasco-9xn-2000-Super-Slick-Epoxy-Bottom-Coating.html Or Amazon
@TechWizeGuy7 жыл бұрын
Did this help prevent noise from hull slap?
@Samuria877 жыл бұрын
Brad yes on my other boat it did
@Samuria876 жыл бұрын
Yes it helped
@carlosmarrufo23505 жыл бұрын
You sound like its a real chore to get your Jon ready, personally, I don't want to watch you paint your boat for 20 minutes
@impacc445 жыл бұрын
well go and get on top of your daughter for 20 mins....u should be excited now...he did a good job !!!! cant wait till funky trump build that wall
@Astralpilot2.06 жыл бұрын
what does that shit do?
@FT4Freedom5 жыл бұрын
It is a long tested bottom coating epoxy paint. It is used for marine applications. It comes with a choice of pigments to add color. The cost per gallon is around $140 including four oz pigment. About the same price as any marine epoxy paint.