Does the pigment come with the kit? Or did you have to buy that separately?
@SwampNStomp Жыл бұрын
You pick the color you want and buy it separately for a few bucks. -Danny
@patrickthompson8913 Жыл бұрын
Was there any leaks in the boat before and if there was did it seal 5hem up afterwards?
@SwampNStomp Жыл бұрын
No there wasn’t. If it’s a small leak I think it would do fine but if it’s a crack I would fix it before applying. -Mark
@SouthernRancher138 ай бұрын
i’m thinking of putting in a coat on the bottom of my Jon boat , which I grinded down to bare aluminum, but I was also thinking of maybe putting a coat on the inside bottom, which has a coat of paint my question is, do you think if I just scratch that paint with 80 grit will the steel flex will that adhere to it or do I need to take that down to bare aluminum also?
@SwampNStomp8 ай бұрын
I wouldn’t worry about paiting the inside. It’s not affecting the performance of your boat, and aluminum can’t rust so what’s the point? Seems like a lot of work for nothing. Steel flex requires adherence to bare metal. -Mark
@mattchumley67355 ай бұрын
I wouldn’t want the inside of my boat being slicker than a minnow’s peter. It’s an accident waiting to happen.
@snookking87417 ай бұрын
What roller did you use?
@atrboi81712 жыл бұрын
You think one pint is good enough or 2 is better i have a 12ft also thinking of doing it too
@SwampNStomp2 жыл бұрын
It was more than enough. There no benefit to do it thicker and you can’t layer it anyway
@atrboi81712 жыл бұрын
What kinda roller did you use?
@fishfullthinkin1272 жыл бұрын
What’s it look like now ?? How’s it holding up ??
@SwampNStomp2 жыл бұрын
I’ve run it into a lot of stumps and rocks. The rocks will scratch it a bit but for the most part it’s all there and still super slick. It’s worth the time and money!
@fishfullthinkin1272 жыл бұрын
@@SwampNStomp cool !! I wasn’t sure if spending the money difference between it and the Gator Glide stuff would make a difference, Thanks !!
@razerburn42164 жыл бұрын
Crap did I screw up I sanded my boat and primed it should of not did the primer ?
@SwampNStomp4 жыл бұрын
Probably not. But it’s done now...
@RustyNail58564 жыл бұрын
looking good . i read the comments . it seems like it is holding up . good job.
@Kevin-fe4zd4 жыл бұрын
How is the Super Slick 2000 Epoxy Bottom Coating holding up?
@SwampNStomp4 жыл бұрын
I have drove over some pretty stupid things and the super slick doesn’t care... I have another video where I do a speed test and you can see me drive it over a log that basically took the whole boat out of the water. Not a scratch! Thanks for watching, don’t forget to subscribe! -mark
@stevegriner49303 жыл бұрын
@@SwampNStomp can u send me a gallon for me boat I need address of this so I can order rhanks
@tomlandefeld36014 жыл бұрын
How is it holding up? I literally just bought a 12' project jon boat to turn into a mud boat 3 days ago. I was researching bottom coats and saw this.
@SwampNStomp4 жыл бұрын
It’s holding up great... except I got a big scratch it where I ran over some rocks... don’t run over rocks! -Mark
@brenalee68293 жыл бұрын
hi, what outboard is that? i see them alot in SE asia, but rarely in the US
@SwampNStomp3 жыл бұрын
It’s called a long tail or a mud motor. You can buy the kit from Swamp Runner and fit whatever motor you like to it. Personally I have a 13hp predator motor from harbor freight. - Mark
@zachhasson83524 жыл бұрын
Is that south Florida?
@SwampNStomp4 жыл бұрын
No it was Alachua county!
@stephenperry19763 жыл бұрын
How much did you use and how big is your boat ? Gonna order some for my 15ft boat and don’t want to over order haha
@abod3eej9902 жыл бұрын
How much you end up using I bought the 2 pints kinda wish I would’ve got gallon
@Randymcsendy2 жыл бұрын
How slick is it? Have can you push it off the trailer or on flat ground? I’m trying to decide between this stuff and gator glide. Thanks in advance for the input
@SwampNStomp2 жыл бұрын
Yea you can push it right off the trailer. It’s slick!
@stevegriner49303 жыл бұрын
Need that for mine,
@terryswails1191 Жыл бұрын
If yiu have a girlfriend that will help you do that kinda stuff, better keep hee and put a ring on her.
@SwampNStomp Жыл бұрын
Dumped her ass and found a better one 😅
@mackjenkins77213 жыл бұрын
Man that was a good video. That was cool watching You do that work. You did a very good job man. It was also awesome to watch you do it in flip flops. The flip flops is the only Footwear that I can wear because i have big very very wide feet sz15 6 EEEEEE wide with very very fat wide toe that are equally straight across making my foot 6 1/2 inches wide from my big toe to the lil toes. my foot out grew tennis shoes 33 years ago so there's no shoes , sock , or boot that's wide enough for my foot. The flip-flops is the only thing that were barely and I mean barely fit my foot because my toes are wider than the flip-flop straps. It really really sucks having a very very extremely wide foot that is 6 1/2 inches wide with very very fat wide toe that are straight across. I wish my toes were at a 45 degree angle like everybody else toes that way my foot would not be so wide. I also like your tattoos man those are awesome. Great video man thank you for sharing.