Fast And Fun Honda D16 Single Cam Build! Gathering Parts!

[@HunterTuned]

Thank you everyone for 40k subscribers!

[@titantries]

You earned every single one much love Hunter thank you for all the amazing content brother

[@nickclashez]

Well going to pick up the turbo manifold and waiting to see what you do next … need info on what injectors your gonna be using so I can buy them off the website

[@HunterTuned]

@@nickclashez I’ll use either the 1000’s or 1500’s

[@nickclashez]

@@HunterTuned just ordered the wastegate 44mm off your site …. Thanks for the info brother

[@Wreckedekcoupe]

You deserve it homie!

[@SlowDelSol]

These d series videos are wealth of information that will live on and be referenced for years since more and more people are adopting K series, but d series will never actually die and the platform will have a healthy cult following for as long as the parts are available. Please share as much as you can.

[@blakep7388]

That was me. I was that one guy on fb lol. It was fun man made that d16 feel like a non vtec b18!

[@SloppyMechanics]

i love single jingles i will be enjoying this one in particular

[@ivtec4fun55]

Man when I had my D15 hatch I went to the junkyard and found a Z6 cam sitting in some JDM engine.... Got it on the half off sale.... One of the best finds I've had.

[@ArthurSperotto]

The MAR Performance single cam Civic went 8.40 @ 158 a couple years ago at World Cup Finals! They can fly!

[@notone4029]

For single cams the Z6 IS the BEST! Your ABSOLUTELY right Hunter. With the Y8 mani. Been MANY MANY moons ago with the single jingles. Lol. K FTW. Oh yeah and God bless as well.

[@jimhiscott2918]

Z6 and the D16a6 are the best in my opinion

[@SimonD90s]

Congrats on getting a shop near home, preservice and patient finally paid off!!!

[@playerinpink]

This will be the hunter tuned shop car. Using all hunter tuned and vs racing products where you can. Love it!

[@89hybrid88]

Standard length rods and pg6 pistons gets you to around 12:1 comp ratio. Much more manageable.

[@Chris_Paul1]

I look forward to the D16 build. That’s a nice parts list. Congrats on finding a new shop, I only live about 4 mins drive from my work. It makes life a lot easier.

[@gerandoeley5429]

Congrats on your new shop I can't wait to see it

[@Fackler91]

Congratulations on the me shop bro

[@mecpello787]

God is in control! New shop close to your home, 40k subscribers and sales going up! God is good all the time and all the time God is good! God bless🙏

[@scotth1087]

I have a built vitara y8 with Bad Guys ported oil pump and redline is 7300prm on 22pds of boost. so far no issues, 3 years on the motor. Z6 crank would be nice peace of mind. Good series.

[@tactical_pat6449]

I love single cam builds. I am doing a single cam turbo vw engine. 2.0l . Turbo size is everything for the single cams jingle.

[@mobilebeeler]

Godddd bless this things gonna rip. I have almost the same turbo on mg eg right now. With 2" intercooler piping its full boost by 3500rpm vtec hits at 4000rpm and its a ripper

[@RorFinny]

My older brother is doing the notched block pg6/stock leng Hbeam with z6 head and I’m doing the p29/stock length Hbeam with ported y8 head… BOTH WITH TURBO!!!! Excited to see what 13:1 and the t3/t4 does!

[@jona_ej2330]

How go?

[@Yonelll_Kim]

Great job brother. I’m excited

[@Private-ks7be]

Stoked about single cam and the new shop close to home. 2023 is looking good!

[@ByThisShallAllMenKnow]

Dude, awesome news on the shop, congrats! I'm looking forward to the single jingle build.

[@EightyLoon]

this channel deserves support you really do come around give useful tips

[@27rally]

i have a old build on one of my crx track car...A6 head on Z6 block NA, 7300 rpm all day ! 14 season on this combo Z6 block are the best !

[@Blakegenskow]

Congrats on the new shop!! That will be nice being right up the road. Roxy will have to learn her way home and back lol. Just got my first shop last year at 21 years old and it certainly turns into a second home fast.

[@jsimmons3090]

Congratulations on the new shop congratulations on 40k subs. I'm super pumped the sohc build u seem pumped I think we are all pumped!! Lol.. keep pushing!!

[@jeroldbreazeale4717]

This is the exact build I’m doing very soon except I went with acl race bearings and oil pump

[@89hybrid88]

Awesome news about the shop man. I’m so happy for you.

[@DomkeBoy]

Dang that if I ever retired the old 14B for a BB dealo, this is probably the turbo. Nice man!

[@dak_719]

LETSSSS GOOOOO i just got my turbo d15b running on e85 thanks to you and the videos you make cant waitt for this build

[@mihailpetrovici5044]

Stocked for the new shop

[@fstockton6719]

New shop HELL YEAH! Congratulations

[@chris4710-s5q]

So cool u found a shop bye home

[@cedriccope178]

Looking forward to this build series, show love for the Lil guy

[@devinej8411]

I love this I have a z6 I want to do for my son I am just finishing a b20vtec build in a da9. Congrats on the shop I work a 15min walk 2.4 mile down the road so car being down for winter to build isn't bad lol.

[@regularcoach3544]

Words are hard to express the feelings of joy I have rn watching you bro💪🏽🙌🏽

[@louielou8262]

Congratulations on the New shop!!! So dope!!😍🙌🏼💯

[@jefflarson4117]

I started watching your channel because of your d series builds. I can't wait for this build series. D16y7 gt2056.

[@SloppyMechanics]

woooooo new shop goofin

[@captainmikek8695]

So happy you are doing a D16Z6. I have a 95 Delsol Si and it's bone stock. Don't want to dump too much into it. DISAPPOINTED that you are not doing a stock motor with with all add ons and not cracking the case...

[@xtremeboost7]

This video prompted me to take a second look at my dohc zc build. I'm running the same rods and pistons, and on my engine, they clear during mock-up even without a headgasket. So thank you. Hopefully, this helps as well.

[@jessetimm4809]

Good deal with the single cam build but even better to hear about the shop congratulations and good luck with everything

[@dominicshort7377]

Stoked for you about the shop !

[@claytonfaulkner3348]

Congrats on the new shop find! Can't wait to see it.

[@robertwcote]

Dude congrats on the shop! That's lit! I hope you love it. We're all excited to see it.

[@williedoesthings4705]

My favorite d series head combo was a y8 head with the y7 cam and rockers so its a y8 non VTEC. Just swap the end caps on y7 rockers to the y8 and it's a beast with a 272 regrind. That with a y7piston in a z6 equals happy daily driver.

[@h3xd3m0n9]

That's what I'm running now with 29 pounds of boost from and ebay turbo no regrind thought and ported y8 head

[@regularcoach3544]

Hell yeah bro got 2 motors built in my shed rn d series all the way💪🏽🙏🏽

[@jonek4731]

My y8 based build still going strong with the y series crank

[@asifdurr]

i heard the build, okay another vitara build. then you poppped out the pg6 11:1s and now you have my attention sir! lool waiting for more content on this build!

[@8301jarred]

I have this same setup I did the same speed factory rods and pistons I had to go to a 76mm bore then I had a built head with factory cam and factory intake with a top mount like yours I made 450 at the wheels on e85 had 1000cc injectors just ran out of injector it’s a great build super fun

[@HunterTuned]

Didn’t have issues with piston coming out of deck?

[@HunterTuned]

Or you used the vitara pistons

[@8301jarred]

I used the vitara pistons I wanted to run a different piston but I wasn’t sure if any other piston would fit on that rod so I just ran those they did really well I have the engine apart now cause I think I lifted the head cause the head gasket is toast so I am going to use this time to send it out to get it CSS and go back with a little better rod and piston set up

[@DomkeBoy]

Thought is seemed funny while listening, so I did some quick calculations. If it was PM6 pistons (-3.4cc 29.5mm height) They would yield around 11.7:1 with those long rods. The PG6 (1.5cc 30mm height) would be more like 14.2:1 w/long rods. However PG6 on standard length rod is also about 11.7:1 P.S. Congrats on the shop! If you don’t end up using those Speed Factory rods, I’d love to snag some hah

[@junkybuilt8990]

Glad to see you are going to do a D series in the red hatch. I remember when you picked it up and posted it on the channel. You said you weren’t going to build the d series for it. Glad you changed your mind. 👍🏼👍🏼👍🏼

[@SkyTheHondaGuyy]

I’m stoked to see this build as I’m fully building a z6 as well

[@LynnTwinCustoms513]

Congrats on the new shop!

[@jeffjones8434]

Looking forward to seeing this build, good to see you excited about it! Congratulations on the new shop! Can’t wait for the tour of it

[@spazda_mx5]

Good news on the shop!

[@jmillzthepimp27]

Also love this type of content this is my first Honda build d16y8 I'm going to search high and low now for a z6 crank lol big congrats on the new shop homie

[@Wreckedekcoupe]

That turbo is sick!

[@rosegold-beats]

Congratz on 40k lets goo. 100k soon

[@peterbryant3584]

Dammm man is a bout time we get some single jingle love out here im almost finishing mine but I dont know cuss every one telling me is to high of compression im like 12.5 for boost but great content keep up the good work and congras on ur new garage

[@youngkingoni7679]

The first for minutes of your videos just covered up a 4 day job I did on my damn 99 d16y8 i heard some loud ass ticking coming from the bottom end and I open up the oil pan and find shavings…..long story short they were connecting rod bearing that were spun 😂💀shit look wild.

[@perkins807]

right on bud congats on the new shop

[@deanmoberg445]

Thank you for the upload. Been a sub for a while.

[@jjabyrosario5320]

Hi, I run that combo a lot, you have to notch the top of the piston for valve clearence, I use a Comp Cam stage 3 and it lights up super fast. Thanks for the contant👍🏼👍🏼👍🏼

[@Officialcaydencemusc]

can you clarify more on that setup ??

[@minidraglife6732]

@@Officialcaydencemuscfr plz im tryna see if i can run stock length rod+pg6+comp59300 cam

[@stooky127]

That lag impression has me weeeezing 🤣

[@jmrogers75]

keep up the good work brother!!!!!!! im loving the d series content.

[@Anthony-fc1zb]

Gonna be a ripper!

[@lilokyang6280]

I will love to see your single cam build. I have a d16y8 turbo with a DSM td05 16G. Keep it up 👍

[@maxinnn1]

Hello, you just earned a sub from argentina thanks. Wanted to see a d16 build.

[@tommylyeah]

1.7mm delta between Vitara & PG6 piston compression height, according to ZealAutoWerks. Any problem this might cause could likely be solved with a different head gasket.

[@prestonking5692]

Yeah the pg6s with the long rods will stick couple thou out the hole (don't quote me on this) but I'm almost sure I read about this subject on hondatech years back and someone did it with like a 50mm or 60mm head gasket and had minimal P2V clearance but it kept blowing head gaskets if memory serves me right. Again don't quote me on this.

[@trentonherrera1783]

Congrats on the new shop, been watching you for years,and keep up the outstanding work 💪

[@BlaserBuilds]

Your shop is supposed to be closer to MY HOUSE... Whut Da Haaaiilllll!!!

[@gusplymale1797]

Man I'm excited for a single cam build, and congrats on the new shop!!

[@sideshow45]

Man I'm always stoked to see you growing, new shope is gonna be awesome for you. This is the style of build a D needs to rip.

[@Brookerbass]

New subscriber! Looking forward to this build! Hopefully get some pointers on my own Z6

[@adrianmartinez6029]

I'm looking on what parts to get for d16z6 and ran into this video. Can't wait to see what you do with your build.

[@spring6meow]

Finally!! hell yeah let's goooo!

[@ekcivicuk]

Would love to see a full in depth video of the teardown and the build, got plans to build one myself and would love some inspiration on parts

[@Grâce-n1d4x]

What is Veytera? I’ve never heard of it.

[@mastercricket7626]

Hell yeah brotha congrats on the shop n look forword to the single jingle

[@2LegitTooQuit]

Congrats on the shop and I agree with basic single slammer turbo setup. But I’ve heard good things about the D16z6 with the Suzuki Vitara internals turbo. Should be interesting to see how yours turns out!

[@BoostedPastime]

Thank you for making this!

[@really6965]

Bhhhhhhaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa!!!! Best part of this video!!! Great job!!

[@casink]

Keep the d series vids coming!!!

[@Lost10mm.]

Thanks for the crankshaft swap not sure yet what motor my wago has. But I've been looking into turbo or swap b or f series and turbo.

[@Fackler91]

I want that turbo

[@BlaineChamberlin]

I’ve heard the y8 crank is better because it has 2 oil ports on crank just need to mess with oil pump to crank up pressure

[@HunterTuned]

Z6 has 2 ports y8 has 1

[@89hybrid88]

Love the video. But that combo is going to get you around 14:1 compression before any head or block milling.

[@jdmchickkustomz9417]

Hey that's what I'm doing is gathering parts for a d-series build

[@Gusmanbro]

Thank you for spreading your knowledge, Hunter. I just got a 89 si hatch shell last year, and got it running + driving in a matter of weeks. Just has a junkyard d15b7 right now, but the z6 speedfactory/vitara build is exactly the direction I want to go with it. Much Love

[@DrDangerDave]

The Ultimate VTEC SOHC Turbo Build!!!

[@4nikat3]

back in the day it was z6 block with y8 head

[@hondad-series9265]

You need to use the street Savage cam for the head

[@oswaldoibarra6157]

Go Pack Go!!!

[@MrZeroLag]

Thanks for putting decent d series videos out there! This will be an interesting build I'll keep watching 👍

[@majorkin19]

I plan on doing this same exact bottom end build , now im intrigued , i have a vitara speed factory build, but too much boost bro 😂😂, i love it but the car goes crazy after a while at 32 lbs

[@kyletice811]

Grats on the new shop! Sounds like a sweet setup. Very interested in these new vs turbos, is it a dual ball bearing billet compressor?

[@HunterTuned]

Yes dual ball and billet

[@Assertiveman]

It's crazy how turbos and turbo manifold pistons and rods cost more then the engine

[@TheBestBuilds]

Might need you to tune my build once I got it all together

[@HONDA_gAWD]

Congrats on the new shop bro. Keep up the grind and the great videos. God bless you and the family.