Faster way to unclog your heater core

Hi in this video I will show you how to unclog your heater core the faster and best way to do it, get your heat back working normal again in no time

[@hamdanla]

I think it s my problem I’m gonna do that, thanks great job

[@jamesvw769]

Wheel acid works the best. 5 minutes flush it out and its like new. Dont leave it in more then 5 minutes is key. The acid reacts with the metal and anything stuck will be released. We do this at work with a 90% sucess rate and its cheap.

[@kennethrobinson1672]

So 15 min is to long ...thanks ...so 5 min is the charm

[@kennethrobinson1672]

Confirmation I was gonna try that method, thanks for the info

[@MyDearestTinaMarie]

What is wheel acid and where to buy it?

[@kennethrobinson1672]

@@MyDearestTinaMarie white lighting ,you get it from the part store

[@edaniel1899]

I used chrome wheel cleaner too ... 15 minutes worked great

[@kjarby69]

Great troubleshooting techniques!! Great information and very practical!!! Thank you for sharing!

[@nestorautorepair]

Your welcome boss thanks for your feedback

[@oneshoe123]

Great video, I got to try it.

[@nestorautorepair]

Ok thanks

[@murrayndumba3290]

Helpful stuff bro way to go...👏👏👏

[@nestorautorepair]

Thanks Murray

[@MattRubano]

Since the heater core is made of an aluminum alloy, I would be VERY hesitant using any lye-based product like Drano. The Drano website states that it will not harm metal, but I'd still be reluctant to use on an aluminum heater core; I just had to un-clog my heater core recently and I did it the same way shown here but I used CLR which did make a big difference. First, I flushed the heater core with pressurized garden hose which did blow out allot of crap, then I added a mix of CLR & H2O, let it soak for 10 minutes, then re-flushed with the pressurized garden hose and allot more crap came out due to the CLR mixture.

[@joew7013]

Well done lucky I found you I was looking at changing out the heater core I'll try this first

[@nestorautorepair]

You're welcome boss , thanks for your feedback

[@theriddlers4630]

Hi there I have done what you showed video but here in the UK 🇬🇧 I use mr muscle same stuff what you put in your heater matrix as we call it here still no heat but my car is a fiat grande punto 1.2 08 if you can help ? Good video

[@nestorautorepair]

Wow make sure your door blender are working

[@chriscreek8577]

Great video..But, i just used a air hose with a trigger and with a rubber adapter.Blew it in reverse worked GREAT..and NO chemicals...I hate chemicals..lol

[@nestorautorepair]

Nice

[@keithqoqo]

What size are the hoses pls

[@guitarstalkandtech9085]

Drain car coolant. Fill radiator with white vinegar let car run 15 to 20 min with heater blowing and drain vinegar and refill with coolant. You should be good. Thank me later ☺️

[@craige.1712]

I liked the cone and pipe

[@nestorautorepair]

Lol thanks

[@neryahwilson6499]

where are you located, may i make an appointment!?

[@nestorautorepair]

Sterling va Google Nestor auto repair

[@kennethrobinson1672]

👍

[@wonderwalls3565]

cant you just use hot water?

[@rondellschuyler7074]

At the end.of video. Junk in bucket looks like antifreeze silica. I have never liked silica antifreeze and or extended life antifreeze.

[@nestorautorepair]

Yup

[@97warlock]

titles slightly misleading. I dont see that this would be any faster than the traditional CRC or Vinegar or other methods, Still gotta access the inlet /outlet lines & remove hoses & prep & all the traditional stuff regardless. only difference is using drano

[@nestorautorepair]

Yes sir

[@theriddlers4630]

please can you get back to me Thank you

[@nestorautorepair]

Yes hi

[@theriddlers4630]

Hi there I have done what you shown ad I use mr muscle here in the UK 🇬🇧 like the grano but it's still running out slowly bit of help please

[@nestorautorepair]

Did you put hot water ?

[@theriddlers4630]

left it for half hour used pure boiling hot water thru the funnel thru both pipes on my fiat grande punto