FASTEST 4 BANGER IN THE WORLD (DSM)

[@Hmonglauj89]

I hope people know how old this set up is. Can't really compare a decade build to today's builds. Much respect out for Brent still. ANY body here who hates, talks about this car that car, always a faster car out there has never ever even felt single digit drag cars. Anything auto should always have respect in the auto community. A real enthusiast would understand.

[@niko790321]

cant imagine that 4 cylinder could get 6 seconds pass. Incredible !!!

[@CHARLIENOS123]

14 years ago

[@killfase01]

Fuckin good ass tech. 86 lbs boost an 11000 rpm. I think I just pood myself a little

[@2slofouru]

+killfase01 It is a sick build, purpose built to just go straight for a few seconds, but very sick

[@IMOBILIZER]

Congratulations!!!!!!! Excellent video excellent job !!!!! Magnus Brent and the CREW NEVER GIVE UP!!!!!!!!!!!!! Thank you for giving this chanse to us about putting this video here!

[@JDMFLAMER]

Blake Knutsen How can you compare a non factory custom built billet v8 topfuel engine to a modified production 4 cylinder engine using methanol? These topfuel engines don't resemble any factory v8 I know of and the only thing in common is the engine layout.. You could fairly make a comparison if there were nitro 4 cylinder drag cars currently competing.

[@12cwell]

Regan D the topfuel dragsters are based on the chrysler 318. Watch a documentary and they put out not a puny 1400hp but an insane 10,000hp LOL

[@justforever96]

+RyTrapp0 And all it took is something over two times the displacement? Wow. Impressive.

[@mumukos]

MARCO thanks so much for the manifold,and congrats for the result Michael from Greece...

[@Pixel_FX]

86 PSI :O That's 6 Bars. OMG. Death on wheels.

[@Five.00]

by watching this video i have alot of confidence in my 99 gsx. oh and thanks for putting a smile on my face!

[@ArtisticSep]

Dsms are great, get a gsx, get a boost controller and tune and run 12s. Its so easy, it literally is that easy with the tiny 14b or t25/t28 turbo. Beat z06s all day that cost 20 times your ride, ive beat vipers, porsche 911 gt3s (2014 model), m6 bmws, gt500s. its ridiculous the amount of power this little engine can take, i dont expect a mustang without more work to pull off such an easy "build" of a boost controller and a tune. for 122 cu, its a mighty little engine.

[@phoenix_fox7773]

Sep596 damn bro! I want a GSX as my P plate car but it's a 6 cylinder and in Australia petrol is not cheap, $100-130 AUD full tank 😭

[@phoenix_fox7773]

@Mr B lmaooo yea ik now bro i was 13 when i commented that 🤣🤣

[@phoenix_fox7773]

@Mr B either way they aren't in Australia which sucks if you reallyyyy wanted one you needa import one and most of em are thrashed either way

[@TheSticky1970]

I know Brent personally and help build his new shop. This car is the shit and he was happy to show me every detail of it on a rain day. He hand fabricated most of this car. He designed the waste gate system that lets him get out of the hole the way he does. Think about 1500hp that can run down the track time and time again without a tear down.

[@FLeXn_YT]

this is how we do in Puerto rico. for ya 8cyl, hold this L bruh.

[@nsrailfann4life91]

Yessir. The engine in his Pontiac is a Chevy Ecotec 4 cylinder. Found in Chevy Cavaliers. Yet they said that the Cavi engines are junk, yet it is one of the fastest and most powerful 4 cylinders on the planet when maxxed.

[@joshdenham8404]

power to weight is ALL that matters. A fast car is a fast car. By the time you get everything together you are using shit from ten different aftermarket parts suppliers anyways. I don't understand the brand loyalty thing..

[@Slothayee]

+Josh Denham you forgot torque you know the thing that actually makes you move

[@Slothayee]

RyTrapp0 you aint got torque you aint moving

[@RyTrapp0]

BmxNitro ...so you literally didn't read anything that i wrote then...

[@billsmith8643]

+Josh Denham Well you have to have a platform right? Is the Honda world's fastest? They are everywhere, way more hondas than Mitsubishis, so yes having a stout platform to start with as a base makes a difference. But as soon as you can make any other 4 banger just as fast make sure and post in the replies. I am sure you can do it with even just a Yugo, right?

[@2slofouru]

+RyTrapp0 Horsepower is what gets the job done, you are absolutely correct. You can have 1500ft lbs of torque to the ground, but if your wheels are only spinning at 5 rpm... you're getting jack squat done.

[@Trickingfunhouse]

This video made my decision to purchase my DSM 3 years ago! Best decision ever.

[@ColAngus]

*86 pounds of boost* lol

[@ITsIMP0RT4NT]

With no intercooler 0.o cuhraaazy

[@silentfox8]

i bet a lot of blood sweat and tears went into that machine that is something to be proud of dude soooo many people under estimate 4cyls PROPS DUDE NOTHING BUT RESPECT

[@mrmeadowsiscool]

not the fastest.......the FASTEST is the sr20 datsun @ 6.93

[@shanehendrickson706]

Brent Rau's record was 6.82 actually, so that datsun isn't the fastest.. Plus there are 2 car's that are faster than even Brent Rau's Eclipse... GM made a car that does a 6.43 and there is a Mazda RX8 that did a 6.27

[@monsterink101]

jeffel80 WIN

[@Orangefurygt350]

Never get tire of watching this over and over! DAMN!!

[@davidporcell20]

4 banger modified gets more respect then a v8 modified. V8s are boring, new age now.

[@ITsIMP0RT4NT]

Said nobody ever about the majority of Ferraris, McLarens, Corvettes, the GT500, Saleens... And yes all if those have been modified along with countless other supercars. Dont get me wrong an AMS 1000hp Evo, Crawford 1000hp STI, or 1000hp Bismoto SI are all fun to dream about, but I find it extremely hard to believe any of those can go 10-20K miles on the same internals w/o needing a rebuild. Yes its impressive but so is twice the HP output from twice the motor. Name a 4banger putting out more HP/Liter than a 3000hp V8 and I'll go hide under a rock.

[@sevantookmanian]

ITsIMP0RT4NT As my old man always told me; "Kids now are building what they can with what they have. When I was a kid we did what we could with what we had." All cars deserve a chance whether you have a TT Lambo or a DSM.

[@RyTrapp0]

+"Turbo Kid860" John Mihovetz(youtube it) running 5.80s with production aluminum 4.6l Ford V8 block, production DOHC GT500 heads, and production crank. yea, boring...

[@Jeff99GS]

@OOQRA This car is a UNI-body so the rear half of the frame is still there. His Subframe was Modified to mount up a ford 9" rear end and some new suspension. Plus some bracing for added strength. I have up close in detail pics of Brent Rau's car if you would like me to e-mail them to you :)

[@SorsanSuuriAfro]

That sound of foul cylinder is so lovely, nice to see it hasn't gone anywhere!

[@kristopherpetekay]

Proud owner of a 96 eclipse! The eclipse stands up above all other! To hell with all others! Got a question though! Got any ideas why mine over reving while in park or neutral? It runs up to 40000 sometimes! Replaced all sensors on throttle body!

[@Pwn4geDJ]

@sirromrecords it is a 4 banger. what they did is changed the alignment of the motor so that it can be rwd instead of awd. the motor now goes with the length of the car and not from the left to the right.

[@cheetoh5]

The car is a tube frame and fiberglass body. It's also rear wheel drive, as anyone who knows Eclipse's would see immediately.

[@JKinz72x]

Brent Rau and Jon Sheppard are going to be hard to knock off. They have been around since the mid nintys. And still tearn shit up!!!!

[@LordSandwichII]

@zx636d6f How does he keep the front wheels on the road? Surely there would be serious tire squeal in all of the gears! Not to mention the torque steer as well...

[@celicaboy842]

haha thanks for the music, my 2 year old was dancing the whole time!

[@dsmeclipsegsx]

@shimrra Thanks for your concern, this is an old video. Next year in 2010 he ran 6.86 @ 200 mph. God knows what it is in 2011.

[@germancatala]

86 PSI!?!?!? highest boost i've ever herd of. this is amazing

[@Looptydude]

read up on this car in a magazine it was in, 2100lbs "back halved" misleading as only stock structural components left are the fire wall and floor pan. Used to be awd but kept braking parts so converted to a rwd with a ford 9". This let them find more power without breaking stuff. It runs lots of classes but record times are set on a 14.5 slick. Phenomenal car and build just make sure you read kiddies, remember Tim Lynch's mustang runs 6.4s on a 10.5 slick at 3100 lbs.

[@Kevin-zr5pl]

I wonder where this car is in 2022

[@ricardopadilla1407]

I give this car a 10 out of 10...great job guys...KEEP THE 4g63 alive!!!!!!!

[@502c10]

how do you guys keep the head on :) that's nuts!!! looks like fun.

[@ElxTapia]

I don't think people read the video captions. The car was RESTRICTED to a smaller turbo to compete with V8's. They ADDED weight to the car so it would be more or less even with the V8's. Won 1s't place in All 7 races he attended. And even if that wasn't enough, It reset the world record 3 times in 1 year? This is a godly 4 banger. It'll race with V8's anyday.

[@nickritter1992]

this video makes me proud to be a DSM owner

[@1998EclipseDSM]

Hey I love the video and love eclipses. I myself have a 1997 eclipse gsx 5 speed and its just stock right now but if you could give me a few tips or few ideas on what would be the best parts to get for it id really appreciate it I have a video of it on my channel and help would be much appreciated thank you.

[@CrazyTacky]

How can anyone hate this, domestic or import.. this is bad ass.

[@sigmapsicharlie]

@karsown The block is still the original cast iron block. And the head, will be a close cousin to the stock one, just ported. But of course, its a race car. So everything will have been built for going fast, not daily driving.

[@x2percentmilk]

@WeNeedFoodPlease how many cars in the sixes are running the original frame? (and dsmeclipsegsx is right about the behind the firewall)

[@luuquangminhpro]

wow so nice car friend

[@semagednim]

i like your enthusiasm

[@VisionaryStreetCustomz]

WOW! that is some fast ass shitt bro! gotta give props where its due, nice car!

[@ALMN8U]

The Rayglass Toyota Celica is a 4-cyl from NZ ran a 6.90 sec, this was in 2008.

[@alhayem2009]

@RaGeSwAgE thanx ,, mm Pleas can you tell me the best number in the drag race for the Japanese engines

[@killerwhale187]

@stuntcc It's a 4G63T, AKA 2.0Liter Turbo Inline 4 Cylinder. Most likely it's twin because of the insane torque. But if it's Single then the turbo is larger than the back tire on a 66 Chevy.

[@Tommy1198S]

Less than 7 seconds at almost 200 mph is no joke.

[@SuperColossal33]

@jbreu2 its just a general rule that the more volume you have, the less pressure you need to get the same result. I'm not saying that exactly 15psi on a v8 = 30psi on a 4 cylinder...but because a v8 is bigger you get the same result with less pressure.

[@TheWoebegoneJackal]

I think its more about proving what a 4-banger can do, rather than doing what everyone knows can be done.

[@globalraverx]

Really awesome....great job

[@MrBdi1]

question where do i get a transmission like that? and what will it cost me? that baby shafts amazing.

[@frozendrake]

WoW first 4 cylinder car im giving respect to, damn thats fast

[@Subsw00fers]

So is there a new video of this 4 cylinder in 2011, because in 2010 our rotary made a 6.58 1/4 mile run.

[@Grab-A-Lane]

what transmission is that??

[@westcoastlife4show]

lol no kiddin all tubes good fabrication sounds insanely awesome

[@Mallampapi_iv]

@Paintballa53 at 86 PSI, wtf are the internals made out of? Titanium forged in the hells of Mordor?

[@2jzgtejza80]

@IssaBendeck1 There's some V10 and V12 with over 6, 7 or even 8 liters, but AMERICAN V8s specialy constructed for drag have 9,10 or even 13 liters engines. Ford Weineck Cobra 780cui, example. Have a nice day.

[@Kersapimpalicous]

I gotta agree with Chris on this one. They are powerful motors stock. Anything else you build for the drag strip first thing someone does is throws a more powerful motor in it. Nobody has EVER swapped a 4g63 motor for anything "more powerful"

[@Meest00GT]

I've seen this car in person and heard it in person too... INSANE

[@tobythesandwich]

@deadchild66669 No they were all FWD or AWD. You can basically remove the front axles (Totally wrong way btw) to force all the power to the rear. But given the power it's putting out it's probably moved the engine from transverse to longitudinal.

[@mitsuevo8mr]

the best engine ever built, the bulletproof 4g63

[@ionizdgrunt2]

BEST comment ive heard in a long while! Made my day haha

[@tobythesandwich]

@strittan I want to see this thing do something other than drag racing lol. If you're talking about that Volvo Amazon it's using a heavily modified S60R engine. And it can handle too.

[@93grech]

@ALMN8U The rayglass celica i know has a 2JZ in it, dnt know where you got 4 cylinder from

[@rvndmnmt1]

And a quarter of the weight...... Maybe you should mention that. All asides, there was a maniac that went by the name of the "Michigan Madman" back in the 60's and 70's. Mated a small block 350 to a motorcycle frame. That bike could do 170 in the quarter roasting the tire all the way down the track. Had a turbine trike that would do 200 in the quarter. Impressive for the time. Man had balls the size of grapefruit. To bad he died about a month ago.

[@trugemini6382]

@Warblade118 no its because top fuel runs on nitromethane which is 40% more oxigenated then c16 race gas..which is what this eclipse runs on....and this motor is also on the production eclipse 4g63 block ..top fuel engines has no relation to any production engine other then being a V8 and is a complete custom built engine..and top fuel cant drive 1/2 mile before needing a full rebuild..this eclipse motor will last half the season at least..yes it is expensive but not as much as u may think..

[@SuperColossal33]

@jbreu2 yeah thats true, another example would be to compare a Supra to a Corvette...Search up any 1000+hp supra and its generally going to have around 30 PSI, 28 is pretty common, and at the same time you can look at a 1100hp lingenfelter Vette, they run at like 21psi...both cars are similar, but the v8 is bigger so it can't handle as much boost...yet it gets as much power from smaller boost.

[@shimrra]

@dsmeclipsegsx how often do they rebuild this motor though?

[@Looptydude]

Read up about this car, originally had awd, but it kept blowing things apart, so a a Ford 9" was put in

[@CykoNL]

did that 4 cylinder come stock with that turbo? cuz man that thing is huge

[@wordreet]

Jeez! That has the same power as the turbo F1 engines from the '80s, and they were spending millions on their v10s and v12s!

[@CodyDickson]

86 psi! holy, were those pistons forged in the depths of mordor?

[@probe26]

I have never been scared of a 4CL car before, into NOW.

[@BalticMotorSport]

This turbo making his work nicely...

[@bbblahoo7]

enlightened me please if you would on the matter... what type of transmission was that he was using? is it power glide>

[@MrShark4488]

Liberty Clutchless 5 Speed

[@corvette4554]

what type of gear is in that eclipse cuz i see him only changing gears without clutch

[@RiversideRacecraft]

2:41, if you would please turn your attention to the back of the car, you will notice that it still burns rice, just not as much as normal. (it appears as though it only burned 2 grains.)

[@chavis808]

i have a 1994 eclipse and i have a dohc 2000 16 valve was wondering if that is stock?

[@LordSandwichII]

@ChillOutShockakon An engine made of diamond. Just imagine the possibilities!

[@GhostSenshi]

insane that they getting so much power out of four cylinders.

[@trugemini6382]

@jklsd yeah the motor is original 4g63 but of course its fully built ..

[@hanknathanielgorman1491]

they also have vw bugs that are tiny 4 bangers and they run low 6s all day with the stock motors in them bored out. a bunch are 8 second daily drivers thats no joke either

[@PLEDGEY]

WOW!,for a 2.0L, 4 cylinder thats impressive, the engineering tolerances on that thing must be minute, like i said impressive.

[@AYEcorolla]

@Jeff99GS Oh and the AYEcorolla thing comes from my friends car. I named it ayecorolla because it keeps breaking.

[@Lexusstylie]

1:41 haha love the way he throws it in last gear

[@Five.00]

this really makes me a proud owner of a 99 gsx..!

[@AudioFreqx]

A purpose built Volvo 4 cylinder is running 6.80's

[@lonelywings1]

I wish someone would attempt a build like this again with modern tech.

[@xilix]

@AE1 Sorry but it doesn't matter that it's a 4 cylinder just like it doesn't matter that a top fuel car is an 8 cylinder. It doesn't matter how many cylinders you have, it matters how much air you can push though the engine, and when your cylinder walls are 6 inches thick, that tends to be a piece of cake no matter how many cylinders you have. Whether it be 4 or 8 or 16, it's all the same, you have to do A to get B. They did A, they got B. A=building an engine that can take 86psi.

[@asillynoob]

new mitsubishi commercial "Introducing a not-so-stock rocket"

[@rowinglove4ever]

@SpeedFreakNO Todd Terry - Uncle Tech (Bart B More Sub dub)

[@956mik]

whats better a automatic gst or stick gst? same question for a gsx?

[@trugemini6382]

@Warblade118t..the gtr can do 600hp easily on a few more lbs of boost and some tuning..yes it will take more psi to make that 600hp then a 7L V8 but the motor is easily able to handle it..im positive the stock bottom end on a gtr being forged. is able to handle over 25psi on pump gas and at that psi will be close to 800 hp..where as say a LS3 6.2L V8 will need to be built up at over 15psi..but yeah of course it take more psi to make the same power...and a single 650hp turbo is not a small turbo

[@n2opkain]

man, this eclipse is epic !!!!!!!!!

[@yajstylez]

@thujunkyarddog it's a half-back... not solely a 'shell'... ...it's still an eclipse.

[@USAon3]

Don't listen to that troll. his whole life is a video game. And you were right all along, it is longitudinal. One look in any dictionary will back you up.

[@bmxer1478]

@thujunkyarddog the 4g63 is an eclipse motor so thats another thing that is eclipse

[@alfredo5771]

Saludos tengo unas preguntas yo tengo uno del 95 estoy tratando de consegir un motor 4g63 para el pero no se donde puedo consegir uno soy de bayamon algi me podria dar una mano quiero montar mi eclipse pero no tengo nungun tipo de ayuda me podrian dar algun tipo de info por favor gracias

[@ymmmmij]

Great vid

[@e320e98u]

@bmxstreet6 this is no eclipse, basic thing that defines a eclipse is, transverse mounted engine, awd system. this is a drag car with a eclipse engine

[@Snattle_Rake]

whats the name of the song? ive been looking for it since i heard the vid!!!