Elegoo Saturn 3 Ultra Review - WAIT! ACF is Good Now?

[@FauxHammer]

Buy the Elegoo Saturn 3 Ultra here: shareasale.com/r.cfm?b=2351046&u=3060349&m=104244&urllink=&afftrack= Buy the Elegoo Saturn 3 Here: shareasale.com/r.cfm?b=2351044&u=3060349&m=104244&urllink=&afftrack= Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:6023738 (watch my video for full instructions kzbin.info/www/bejne/fZ6TXq1vbJannbs) Join this channel to get access to perks: kzbin.info/door/_9Jsf3SP8aMJgn0xv5jHjAjoin Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/wargamer?ref=FauxHammer

[@catagris]

At 8:28 it looks like there is a select all and then you can delete everything. Is that not the case?

[@Jedi_Jeff]

My wife just bought the Elegoo Saturn 3 ultra and wash/cure stations for my birthday. We used your link. All totaled $537 USD. Really great deal.

[@ericmoe63]

I just received my saturn ultra last week. It's not my first printer, but it's my first resin printer. I held off for a long time because of the cost to build volume. I did some research and had prior knowledge of resin printers, but I still took the chance on this as a preorder. Gotta say I'm impressed for many reasons. First-time setup like bed leveling, build volume, build quality, and I can't really complain about the slicer either. I went into this purchase mainly to print drone replacement parts, and now I'm searching through my files for models that took DAYS on my fdm printer because the saturn ultra produces highly detailed prints faster than the estimated build time. If you're getting one, just run every benchmark print you can find, and I don't think you'll be disappointed with the results. *Promise I'm NOT a bot or paid. I only wrote this because I saw another video about this printer and had buyers remorse because of the AXF film and the general sentiment of "Why does this printer even exist?"

[@DEmitch01]

I bought the ultra as first 3D printer ever and i am absolutely amazed by the speed and detail this printer can print really loving this printer and its so easy to use.

[@HakkeJoe]

I just ordered my Saturn 3 Ultra.. it will be my first printer, too.. i´m excited :D

[@sk8erdude2467]

As always great video! I've had my Saturn 3 Ultra for almost a month now and love it. It's my first resin printer coming from the olden days of a heavily upgraded Anet A8 FDM printer and I'm absolutely sold on resin printing. Sadly I scratched the ACF that comes with the printer early on but Elegoo still doesn't sell replacements yet. I'm using Saturn 3 PFA film until ACF is actually available but zero issues without changing the settings.

[@iwannaratrod]

I have one that should be arriving any day now. I even ordered a standard Saturn 3 VAT/FEP based on your previous experiments. But it looks like I'll be mostly using the ACF and have the FEP as a backup or when someone wants every bit of detail possible. Thanks for the update and I guess validating my purchase. :)

[@FauxHammer]

Would love to see your results in both as I’m still to confirm if it’s just me. And yeah, you picked a good one

[@topherc100]

You can do select all on the file browser to delete all@@FauxHammer seen at 8:27 / 8:28

[@Travis.O]

This is the review I’ve been waiting for. Thanks

[@FauxHammer]

Thanks for watching

[@patrickl9930]

I switched over my Mega 8k and Mighty 8k printers last month and have had nothing but great prints with ACF. Being able to cut my lift height by 70% _and_ increase lift speed 2x has been a gmae changer. No weird patterns so far!

[@FauxHammer]

Glad you had a good experience. My Mega 8k comes next month and I;m about to change my FEP for ACF today on the Phrozen Mighty 8k (now 12k)

[@kdonv]

Why do you think that is? I'm buying a new printer and the whole ACF bit has me nervous.

[@johnhinkey5336]

A more diffuse light (refractive) source will play better with the granular ACF surface whereas a more collimated light source (Fresnel lens) will be more sensitive to the granular nature of the ACF film. Your results make sense.

[@FauxHammer]

Good to know. Thanks for backing this up, because it’s blown my tiny mind

[@HumbleMonkey]

Is it known that the backlight in this model is less collimated, or more diffuse? I wouldn't equate "refractive" with either "less collimated" or "more diffuse". Just the opposite, in fact. EDIT: clarification: a fresnel lens is a refractive optical element, so really we're comparing a "conventional" (refractive) lens with a fresnel (refractive) lens, FWTW.

[@FauxHammer]

@@HumbleMonkey agreed, but I knew what was meant

[@ajc4477]

I love your videos but I think you should save yourself a couple of quid by dropping the stock footage of randos shrugging/nodding, etc. It's not needed and it's hackneyed at this point.

[@_--JohnVK--_]

@@ajc4477 Sorry for the O/T, but that is EXACTLY what I was thinking! It is very distracting and adds absolutely nothing to the video. I would really love to see those go. So, in fact, I would really love to NOT see them at all ;-)

[@Soldierboy441]

I’m super excited, these just went up on Amazon, Elegoo doesn’t ship to my region but they do. Looking forward to seeing the upgrade to my Saturn S

[@l.f3878]

Was looking at the Saturn two but now think spending a little more and grabbing this one! Thanks for reviewing super helpful ! Love your videos!

[@FauxHammer]

Glad I could help!

[@DisgruntledPigumon]

“Damn you” (not really). I had just accepted that the differences aren’t worth the extra price, with my only consideration being the change in light source… and now you’ve basically said it makes all the difference. 😮 I’ll wait until your next vid where you swap the two vats to basically confirm that. Also, I was shocked by the print speeds. To me that would be well worth it. To be able to start a print in the morning, and do all the post on the same day is honestly a game changer for me. So, thanks for going crazy. 😀

[@guillaumevanoost811]

Same here 😅

[@FauxHammer]

Sorry, I only know when I know. i did not expect this result.

[@julianthomas2742]

Lo Howler! Great video, but Morningstar on the computer screen in the back ground made me subscribe instantly. Hail Reaper and Happy printing!

[@FauxHammer]

Hail Libertas!

[@adamjung]

I was wondering how the wargamer resin would perform at high speed. Thanks for making me more jealous of the UK (longtime tv Anglophile). Need to find time to set up my ultra!

[@3Dprint4you]

I got a very nice matal scraper with my Phrozen resin printer It was even laser etched with the phrozen logo. 😜 Love the videos! Keep up the awesome work. I love your perspective on things and telling it like it is.

[@JohnVanderbeck]

Spoiler alert - the filters don't do anything really. Not even the big huge stand alone one. I bought it as a combo when I got my Saturn 3 Ultra and I have multiple HCHO and TVOC sensors in the workshop. These things on or off didn't do squat. The ONLY way to handle this properly really is venting the air outside. Period full stop.

[@nazaxprime]

Basically, yes. There's plenty of evidence for that. Anyone truly serious about this would perform an industrial hygiene survey, install exhaust hoods, down draft tables, would use resporators in conjunction with a respirometry lab and annual testing, and the usual gamut of PPE. ¯⁠\⁠_⁠(⁠ツ⁠)⁠_⁠/⁠¯

[@rallyfeind]

People also don't realize how many sources for VOC's are common to things like mineral spirits and almost every solvent we use for thinners. Almost everything we use to clean from a supermarket is still not safe to breathe fumes from either. The idea the average person is actually understanding what is on any MSDS or what respiratory PPE even means in practice beyond a mask and fans or venting is kinda absurd to expect. People don't use respirators when using mineral spirits commonly despite all the hazards and warning all over the art world.

[@ManAtPlay]

Is hepa filter works for voc?

[@Shrouded_reaper]

Yep, the cleaning solvents are much, much worse for you than the resin.

[@christophermarin3231]

I just bought an Elegoo Saturn 3 Ultra, as my first resin printer. It arrived today and now I am currently waiting for Elegoo's customer support to reach back out to me. As my ACF file came damaged in the center. Hopefully they respond soon, as you can imagine, I was excited to start printing.

[@Saintgoten]

New to the hobby, just bought one of these thanks to your reviews. Cheers mate

[@FauxHammer]

Welcome aboard!

[@ianwood9780]

iirc, refraction is when the input light (to a transparent glass) is below the critical angle (snell's law), the light travels parallel to the glass surface, and refracts up at the critical angle, so every bit of light is parallel. This is clever. Or i am hopelessly wrong.

[@omara2823]

Great review, I think I will be upgrading from my Photon S! Anychance your wargamer resin will be available in Australia?

[@FauxHammer]

Yeah, this would be a crazy upgrade. We are looking to ship worldwide, but unfortunately, Australia is a difficult country to get product into at a decent price.

[@neiswestnij]

Ordered my Saturn 3 Ultra based on your reviews. I planned to order PFA foils too to start with, but now I’ll try the preinstalled ACF for now

[@1topgumpilot867]

Hey Bud, I have received my Ultra, I got around to un-boxing it today, seems I have a PFA not an ACF. I assume the difference is the PFA is transparent not frosty as such like in your video, i can see the words on the levelling card like through a window? I will be very miffed if I have a late Friday special!

[@thejdi]

Sadly the Resin/Company won't ship to outside of the UK. Any idea if they are planning to setup a storefront/distributor in the EU? Would love to buy but not with the shipping expenses and import/tax fees.

[@FauxHammer]

We are trying to do it.

[@Cakemagic1]

This is actually pretty fascinating and exciting. ACF that does not have that drawback makes this my new printer of choice now!

[@mitchellhastings1736]

Really want to try Wargamer Resin... is there a way to get it in US?

[@krisd9506]

Great video! Just ordered one! What wash/cure station do you recommend for it? From your video on the Phrozen Wash & Cure kit, it looks like that one might be a good fit with this printer.

[@yanis_s500]

Great video, just purchased this 3d printer! :) One thing I dont understand, when watching 3d printer reviews ( also FDM), is - Why people are so oldschool and they keep using USB sticks? I have Bambulab X1C and I never ever used USB stick, since sending files is so much easier and quicker. The same probably goes with this Elegoo 3 Ultra.

[@tiagojohannes5920]

Hopefully with this video I can convince my parents to buy the Saturn 3 Ultra. I’ve done a huge amount of research on Resin printers now (like 70 hours+ even made a presentations. . .) and I think this might be the video to do it. Only unfortunate thing is that it would have been for my 19th birthday but if they do get it, it will arrive a month from now which is past my 19th. :l Anyways keep up the great reviews!

[@gunrunner35]

Per your video request, I decided to buy this printer as my very 1st, 3d printer of my own. Years ago, I was doing some designing of models for a friend who got his first 3d fdm printer back around 2015ish. My goal is to print larger sized statue-like figures for my own custom painting. I really liked the details and all the information you provided in this video. It was a real struggle between this one and the Uniformation GK2, but due to the physical space requirements where the printer has to go, I don't have enough space to accommodate the pivoting up and back cover. If the Uni GK2 had a lift off cover, I would have bought that one in a heartbeat as my first. I really hope the Elegoo Saturn 3 Ultra lives up to all the reviews. Only time will tell, and I'm ready to see what I can do with her when she arrives. Thanks for all the in-depth reviews you do, as they were the best in providing what I needed to know the most about when purchasing a printer. Keep up the great work.

[@brutallica2944]

Got her yet? And how are you getting on?

[@gunrunner35]

@@brutallica2944 I literally just received her in the mail yesterday. Got her set up and made sure the plate was level and ready to print. Unfortunately, I need to do a couple more organization redoing tasks in my tiny mini-workshop where I put it to get it ready to print. I still need to get some good gloves, a respirator, a cookie sheet or rubber pad, you know bits and pieces that are needed to really enable printing. It's going to be a multi-stage process before I can even get my first print done.

[@ashouaxiong1404]

Hows it been?

[@antongunther3977]

Great video as always! I'm very interested in the acf vs nfep video. I've been tempted to try acf, but your other videos have made me put a breaks on.

[@FauxHammer]

i know, sorry this one flipped it, but i can only show what I see.

[@cuzzman01]

​@@FauxHammer I still get vertical lines on my S3 Ultra. I print a lot of flat surfaced geometry and lines are very visible.

[@Alex-xh4jn]

Hey there, as always love your videos - they never fail to be super informative and helpful! I was wondering what you thought about the mini 8ks vs this printer if the number one goal is to maximize detail on 28mm printed minis. Would there be any discernable difference between this and the 8ks to justify losing out on all the benefits you outline in the video?

[@compsultinc6417]

This video finally convinced me to buy the Saturn 3 Ultra after hesitating for weeks comparing it with the Anycubic M5S. Thanks Ross!

[@FauxHammer]

One is happy to be of service

[@ianwood9780]

fantastic. i was going to ask you to somehow keep these reviews up to date - 'cos firmware upgrades can make a difference.

[@gandalf3606]

I just ordered mine based 100% on your channels and reviews. Im ordering a spare vat and would like to get Nfep for it but unsure on which to get. Any recommendations? Thanks for all your hard work!

[@kaotictube]

Great review, but please PLEASE, stop using the stock clips for filler, it's better you just let your footage run a bit longer.

[@FauxHammer]

I’ve tried. It doesn’t look right. Sorry if you don’t like it but until I can get a setup where I can do my own talking head segments. I’m sticking with stock

[@PietroMalaguti]

I'm producing parts for scale models industry and 3D printed kits. I'm printing with 2 Saturn3 Ultra and I've ordered a bottle of your resin to be tested. Now, what layer height you suggest for better results with this printer? I understand good 0.018? Is that related to its pixel size?

[@jmssun]

4:33 I always use a short L-shaped USB extender, so it is flexible to prevent drive from breakage due to accidental bumping, and to prevent connector from wearing off due to frequent usage

[@marcoc.1646]

Regarding leveling, I'm happy that they changed the fixing system. I have an Elegoo Saturn 4K and just yesterday I started to notice that by printing miniature bases directly on the plate, I lose millimeters in z and the model becomes wider. I think it's due to the screw that blocks the Z of the plate which isn't able to tighten well.

[@PewpewFiah]

Bought a Saturn 3 Ultra through your link a couple weeks ago, so DEFINITELY super surprised to see this. I even bought some PFA Film to go along with it thinking I'd need it, very surprised to see I may not.

[@FauxHammer]

I’d love to hear what your results are

[@pablofiasco2]

as i said in the chat, thanks for another good review, its good to have a pricerange to set a goal for saving up to!

[@FauxHammer]

Agreed. Decide what is right fir you then find a way to make that work. Much better than just settling fir something you’ll be unhappy with even before purchase

[@DFDragoon]

Thank you for the video and consistent content. Much appreciated. Out of curiosity, have you tried or looked at thermal vat bands / vat warmers for resin? I'm debating between the Saturn 3 Ultra with one added on or the GKTwo at the moment for what will be my next printer. I've seen one video looking at it, and while it seems promising, I'm always curious what multiple reports say. No worries if not, just curious. Thank you again for your time and content. Have a good one.

[@HavasiP]

Makes me very happy that I ordered this printer now that I've seen this video. Could it be the resin you're using? Are you getting those lines using that resin on other ACF printers? Have you tried a different resin in the Saturn 3 Ultra with different results? Just imagine if its actually your resin that somehow can take full advantage of ACF.

[@FauxHammer]

Yep tried this resin in the Mars 4 Ultra too. Same typical ACF issue

[@petercallison5765]

@@FauxHammer So its the light source then?

[@FauxHammer]

@@petercallison5765 doesn’t seem so. Same result on Saturn 3 basic with ACF. So this must just be a different ACF

[@the_kroete4357]

😮 that leaves me surprised, i am excited for your future experiments for this.

[@FauxHammer]

Thanks kindly

[@chublez]

Oh man. I just need to buy one already. I'd really like a nice breakdown comparison video of all the resin's though. That would be supper handy. What goo is good for what? I know you are mostly a miniatures guy but what if i want to print say an RC scaler body or bits of Gridfinity to organize my toolbox is any resin better or even goot at that or should I be leaning on a fdm printer for that sorta thing.

[@FauxHammer]

Yeah I’ll be doing a comparison soon with Sunlu Resins

[@chublez]

Subbed and waiting. Looking forward to it.@@FauxHammer

[@Optix334]

Pro Tip: Store your sliced files locally, and when you send to the printer use the same name so it overwrites and never fills up. I can't think of a reason to keep files not actively printing on the printer itself rather than my PC since its all 100% wireless now. You can also skip Z=0 when leveling. The printer already goes to 0 when you home it. You're just setting it to the same setting over again.

[@FauxHammer]

Oh that’s genius!

[@TheIcemanModdeler]

Awesome review, mine should arrive this month.

[@Iskelderon]

Good to know! I've had my eyes on this one. My Photon mono has served me well for quite some time, but it's time to move on to something larger with a better pixel size and sharpness.

[@bruceknapp8170]

Did you try replacing the ACF with FEP? I did and have not had a single successful print.

[@alexchester1617]

Bought this printer with your link, Great video! cant wait to get it and hope you get your kick back from the affiliate link!

[@ItsDrMcQuack]

At 8:28, the screen shows "select all" and a Delete button. Unless I am missing something, that is the EXACT thing you're criticizing them for leaving out, is it not? Great review, by the way.

[@FauxHammer]

Sorry, that’s the USB stick showing. Not the internal memory

[@RadishTap]

Thanks for your content! What would you recommend Elegoo Saturn 3 Ultra or Anycubic Photon D2 as a first 3d printer? The Price is the same.

[@FauxHammer]

That really depends what you want. Small build area with very sharp but slightly pixelated prints. More was of use and longer lifespan before replacement parts are needed Or a larger build area, still with quite sharp prints, less pixelated but a tad more bloated, a tad - most people won’t notice. Like 99% of people. My pick would be a Saturn 3 ultra having had both. I print miniatures…

[@KarnikDew]

You know Ross means business when he has a 3D model of Chibs (Sons of Anarchy) in the first minute of the video! Here's to FauxHammer and to sons of anarchy, an amazing YT channel and one of the best series I've ever watched ✨

[@FauxHammer]

I still have all the other lads to print at some point.

[@bacawaka2813]

I wish it was heated too. I moved my 3D printing to my garage because fumes are starting to become unbearable and I dont want intermittent failures during the winter.

[@Madd_Dadd]

Damn it! I was so set on getting a Anycubic 3D printer, based on your reviews. But now? Hmmm. Any chance testing this printer with water washable resin? I love your channel, it’s my go to for printer reviews, keep up the good work ❤

[@patrickstack2741]

I have the Saturn 3 ultra for 4 weeks now and Im on my third bottle of Anycubic water washable 8k resin - about € 30 , Its my first 3d printer and the quality and ease of use / reliability is excellent. would totally recommend.

[@Madd_Dadd]

@@patrickstack2741 thanks, that helps alot

[@DragonSkullStudios]

I almost waited to get this printer. I ended up going with the Saturn 2 8k. It's works for me. I'll watch your newb video to learn how to tweek it.

[@FauxHammer]

That’s still a solid printer and as I said in this, I wouldn’t rush to upgrade

[@rorycampion5890]

Completely torn over this or the regular Saturn 3 at the moment, is it worth the extra £££?

[@FauxHammer]

The difference is WiFi and a UI you’ll rarely touch

[@rorycampion5890]

And now I've just had the email for the Saturn 4 reveal next week, looks like it has a flip lid, not sure what else it may offer though

[@andygeorge6065]

I bought a Saturn 3 Ultra on the recommendation of this video... Shame I couldnt buy it off an afil link, Elegoo doesnt ship to New Zealand (but they DO have an outlet here. Go figure). Questions regard machine: Do I water clean the vat after use? I use Water Washable resin, so clean up didnt use a metric assload of alcohol. Secondary question, can that water cleanup be HOT water? Would a detergent be detrimental to the continued usability of the vat? Whats the toxin in the resin? How do you get rid of the wash water at the end of the day?

[@andygeorge6065]

Oh, and Great video series, earned a Sub...

[@miguellopez3392]

The liniar projected light can give light uniformity of over 90%, other methods get between 80-85%, dlp gets over 95%.

[@watsonstudios]

Used ACF for awhile but switched back to nFEP. ACF creates vertical lines in the print. The frosty surface scatters the light and creates light and dark voxels, almost like adding noise to the light coming through the LCD. I'll take quality over speed any day.

[@FauxHammer]

Seen that many times myself. This did it do it

[@rllsryc]

Hey I just found a delete all button, You mentioned the lack of a button to clear all the files in the internal memory. Its there just do a long press on one of the files and then you have the option to select all and delete all.

[@FauxHammer]

thanks, that's super helpful

[@slayingrn]

Really wondering why they didnt send you an ApexMaker X1 printer for review?Your channel is almost as large as the kid they did send one to.Are they afraid your Elegoo love is unbreakable? Did they contact you at all?

[@julianopolito]

How well do you think this ultra serves as an upgrade to the mono x? Any cons?

[@frankcastlexd1660]

Damn, I don't know what to think. I bought a Saturn 3 ultra and it has crisscross lines. I've had many printers in my life and I know what I'm doing. Is there a chance that your resin is causing the effect of the lack of intersecting lines? What would the situation look like in your case, using ordinary gray resin, e.g. Elegoo or Anycubic? I will also add that after changing to regular nfep, the lines disappeared. Software differences? You are actually the only person I know who doesn't have a problem with ACF :(

[@FauxHammer]

Ok, thanks, this is the first I have heard from a different user where this is the case. I also herd back from Elegoo where they advised that they use the same ACF on the Saturn and Mars…. Unlikely the resin because I used the same resin on both reviews. So I assume it’s just a lottery with ACF. Damn

[@FauxHammer]

Also, I’ve only not had the problem this once… I’m also very cautious in both this, and my upcoming video to say, this could be luck.

[@Rhyds86]

I was going to hold off on getting a printer until towards the end of the year but I'm hearing good things about this Ultra. Might have to reconsider. Thanks :D

[@FauxHammer]

Sales will be on towards the end of the year, but I worry they will sell out fast!

[@r1ck5m1th]

Mine's just arrived! Thanks, Ross 😁 am I smoking crack or can you print multiple different exposure tests at once on the same plate with different exposure times? Swear I've seen you say this before but can't find where 🤣

[@FauxHammer]

You can on Anycubic printers, not these ones unfortunately, one at a time

[@r1ck5m1th]

2s seems to work reasonably well with a lift speed of 60>600. First print posted after the burn in layers and we have plate adhesion. Let's hope we have some lion's tower minis in the morning

[@TerranFederation93]

Just looking at this review to decide whether to get this vs the standard Saturn 3 as my first printer , have you had to replace the tray since the review to see if it was just a one off lucky draw or if they have genuinely got a good product?

[@FauxHammer]

No bit enough people have comment to pretty much conform I just got lucky. Personally I;d dicth the ACF just for the sake of consistency. This is still the better printer IMO. Even Elegoo have ditched ACF in their new generation.

[@TerranFederation93]

@@FauxHammer Fair, thanks for confirming. I'll look into the PFA tray replacement should I go for the Ultra.

[@staticfracture5691]

Sorry to comment on such a short video, but I can't seem to get my settings right for this thing. What were your final settings to get such speed and detail if you don't mind me asking?

[@rebekkamejlby5379]

ohhh darn it ! I thought I had nailed down to what printer I would buy: The Anycubic M5s with a M5 vat, like your previous video, but this Ultra looks amazing too!

[@FauxHammer]

This one, easily this one!

[@ridwan3533]

Thank you after seeing you review i decided to buy saturn 3 ultra after several consideration and meet some colleagues of mine who also own this printer i buy this machine love your others vidio explaining about printing resolution it gives me some new insight Moving From machine with 4k 7.5 inch with xy 40 micron to 12k 10 inch with xy 19x24 micron is massive gap for me especially for post production

[@Rhino_Aus]

I ordered the Saturn 3 Ultra as my first resin printer, and after watching your Mars video, added on a spare vat with FEP. Guess that wasn't necessary! I'm now super curious to compare them 1:1 and see which performs better!

[@FauxHammer]

I’d love to hear your impressions too

[@trentenian]

Do you know when you'll get your hands on a Saturn 4/Ultra?

[@the_arcanum]

Hey Ross, thanks for posting your results and your sharing your uncertainty. Could the screen protector thickness + added thickness of ACF vs NFEP be accountable for a better light diffusion, reducing the surface effect of the ACF while softening a bit the print ? I expected the M5S and Saturn 3 Ultra to have different results if only because of the autoleveling floating screen of the M5S (that adds some distance between screen and ACF) that doesn't play in its favor. But I'm puzzled you find such disparities between models of the same brand and segment (Mars Ultra vs Saturn Ultra).

[@FauxHammer]

Not based on all the tests I did on the M5 series. Screen protector had no discernible effect

[@zior92]

Would love to see a video with you testing the Vocs and see if these carbon filters help at all.

[@FauxHammer]

Working on it, they don’t help at all

[@zior92]

@@FauxHammer Haha okey, that doesnt sound good :D

[@herrnerdmeyer3638]

How long did the prints to complete? I mean lift speed is one thing, but how long took the whole process? Thanks for the video?

[@FauxHammer]

Well, the whole of Tenjin took around 16 hours for about 4 plates

[@herrnerdmeyer3638]

@@FauxHammer that’s very nice. I don’t need fast printers. But I have a place for a very fast printers in my life. It sounds weird. But it doesn’t make a difference for my daily routine if a print would take 5-10hours. But I could get two plates done, if it takes less than 4 hours.

[@grahamfrench340]

I've just ordered one of these but I would have been interested more in how it handles more geometric shapes with hard edges than figures which I don't need it for. My previous Mars 2 Pro used to misprint the lower edges of items or keep putting steps in long vertical positioned items so I've got my fingers crossed this won't do the same. I prefer the power switch being on the side as I got fed up reaching around and fumbling for the switch on my bench at the back particularly as I like to have a bit of space in front of the printer as a working area. With my experience of CNC machines I also went for this as I believe the metal chassis will be sturdier as a mount for the ball screw and slides, more rigidity should result in a more accurate model. I'm hoping the grey lid is transparent enough to see in because it's looking a bit dark and would have preferred a red lid.

[@Desmo904]

Ooooh, you were on 69 likes and I struggled to click on 'like' to change that (but I did) lol! Nice review of the new printer though. I really like the plug in filter on my Saturn 8k. I can have the printer run in the same room and I barely notice the smell at all. I'd still run a flex plate on any printer I get. The rare build failures (not many at all) are worth it for the simplicity of removing models from the build plate easily.

[@FauxHammer]

Thanks fir upping me, it would ah e changed at some point but being stuck at 69 is not so bad

[@RocktCityTim]

Ports location vs. Wash-n-cure vs. deskspace - put the wash-n-cure on the left side 😅 But I do agree that the ports should be on the front and power should be on the back.

[@MetalMatt2510]

I am new to 3d resin printers. I am looking at a Saturn 2 8k but for an extra £7 i can get a Saturn 3 12k. Shall i go for a Saturn 3 ?

[@robinonrust8756]

Love you reviews and your totally right in the K marketing rubbish. Nicely explained about all that is important is the pixel sice. I'm not into miniatures but in to flat surface mecanical parts printing. Ordered this one now because of the light source and the steady Z-arm. Cheers.

[@nazaxprime]

Always nice to see a win. 👍👍

[@FauxHammer]

tahnks

[@sixthsacrifice4458]

I understand the complaint about power button and other stuff placement... But if your desk space is tight, there's a whole other side you can put your wash and cure station on.

[@1topgumpilot867]

well sorry to hassle you so long after you posted this. i bought the Saturn 3 Ultra after checking out this and you side by sides however laughingly, you cant seem to get the Elegoo standard rapid resin in this country, any ideas?

[@FauxHammer]

No worries mate, I’m always alive and watching no matter the video age. But honestly, I e never even heard of this resin. Try not to worry too much about particular resins it handed resins. If you want a fast resin. You can try Anycubic, Elegoo, Creality, ir anything.

[@prymsonify]

I was chosing between Saturn 3 and Anycubic M5. I ordered Saturn 3 (maybe because it was cheaper), but the same day I relaized that I need Ultra, or I will not be fully satisfied. I asked Elegoo support to change my order. I don't regret that. For me it was Linux system that changed my opinion. I beleived it will have much more hardware capacity. After all I think extra 100 USD is nothing compared to better OS, touch screen, light source, Z axis, WIFI etc. It's my first resin 3d printer, I could not beleive in the quality it deleivers. I managed to crack LCD screen already, in my first 2 weeks of using it, but still... wouldn't change to Anycubic. Thanks Elegoo!

[@FauxHammer]

Good choice. Sorry about your screen woes though

[@prymsonify]

@@FauxHammer by the way. Elegoo is sending me LCD for free. I was shocked that they took warranty for crashed screen. Best customer service ever

[@Prickles2001]

How did you crack it?

[@prymsonify]

I was changing resin so I cleaned everything. I was printing 8cm circural shape. During this print ACF was slapping loudly for the first time ever. And in about 75% shape released and slapped back into LCD and broke it leaving big circular crack on the screen. Temperature changed and I didn't calibrate I think I was overcuring. ACF was already scratched so maybe those tiny scratches made it more sticky. I'm not sure

[@D3m0n7x]

Quick question i think i missed it, when you started to up the speed, where you still using the same resin or did you switch to a special quick print resin?

[@FauxHammer]

nope, same resin all the way through mate

[@D3m0n7x]

@@FauxHammer amazing thank you!!!! I just purchased this printer yesterday and I really like Jamg He 10k resin but I'm not too sure what speed it can take I will definitely start to experiment!

[@FauxHammer]

@@D3m0n7x just start slow, so you know it works, then incrementally speed it up on every following print until you start to see failure, then back off. That's your fastest speed. Don;t waste time doing speed tests when you can be printing stuff and doing it at the same time.

[@lewismcintyre9483]

Im really torn between this, the mars 4 ultra and the mars 4, is there a washer curer that can fit the build plate for either the mars 4 ultra or saturn 4 ultra? Also, say i couldnt fit all my prints in the washing basket, how long would the other fresh prints be ok sat on the desk waiting to be washed and cured ?

[@dovmerrill804]

First time commenting on your channel. 1) With kids, how do you find time to make some of the most actually useful videos on resin printing and reviewing resin printers? 2) Maybe this is a dumb point, but wouldn’t we-all benefit if we ( the resin printer buying community) had a “standardized 3D model”, say with a standard set of flat and curved surfaces, with a standard set of varying resolution details, that could be printed with a standard set or sets of print parameters ( including resin print temperatures), and tested using a set of community-chosen standard set of resins, so that those who wanted to participate could crowd-source test these new printers and submit “controlled” data on problems like the elusive “ACF” problem? This might help us isolate the problem source(s) and feedback this data to the manufacturer community ( be that machine makers, film makers, or resin manufacturers). Please advise, thanks!

[@Starfury0042]

I've been looking at adding a Saturn printer since I currently have a Mars 3. My Mars is great and just works - but (you knew this was coming) - the build plate is kind of small when I'm printing larger miniatures. One dragon took me 5 print jobs to do. My dilemma is which Saturn to get? The new one is a bit more than I want to spend and I'm not super clear on how much real difference there is between a Saturn 8k and a Saturn 2 8k for print quality and overall build/reliability. I've watched and read reviews - and can't find all that much difference other than age/price and maybe build height.

[@FauxHammer]

Check out my Saturn 2 bmvs Saturn 8k video. Can you see a difference? Both are still great lrinters but the difference between those 2 is minimal. Between the Saturn 2 and this is even less. It’s there. But you need to really squint and stare for ages to spot the differences

[@meatlifter]

I just bought this bad dad last week. Calibration has been interesting, but this is my first printer.

[@bulletsie]

Great video, I Love Elegoo! had their mars, saturn1 and saturn2 printer and their nepture FDM. My original saturn1's on the way out as I've got the LED wont turn off issue that I believe is a dodgy mosfet which only happened after I updated the firmware. I'm currently looking at the Saturn3 Ulra as there's 100bucks discount at the moment. I had wanted to go DLP so I would not need to worry about LCD screens but the printsize on the current offerings is too small I prefer the bigger print volume so looking at the S3. Some questions about ACF (Its new to me) Can you put ACF on older Printers that use standard FEP If the ACF gives crap results on an Saturn3 Ulra and you change it to a standard FEP do people need to adjust Exposure times and what other settings ? ~B

[@FauxHammer]

ACF is fine on the Saturn 3 Ultra it seems. You can use acf on older printers and you may not need to change settings but you’ll need to relevel.

[@ipbk8471]

Would you purchase this saturn 3 ultra over a GK2? I am struggling on deciding which is a better choice

[@spammerscammer]

Like comparing apples to oranges. The GK2 is in a different category.

[@ipbk8471]

@@spammerscammer well factor the price if you can

[@rtsstream]

why not dip the entire plate with print still attached into some alcohol to remove all that resin before you scrape it get resin everywhere? just curious, maybe im doing it wrong. I like to clean all the resin off then remove the pieces..pop them into a iso/ultrasonic bath..

[@FauxHammer]

I do t like to put my plate in cleaning solution. If has led to follow up prints not sticking

[@DMHightower]

Great video! You sold me!!😊

[@emanuelperono1562]

I know this is late but I'm still confuse how you able to remove the cross hatch surface due to the ACF film you mentioned on your previous video?

[@FauxHammer]

I got lucky, I can only assume something like my ACF sheet was from the end of a roll or something where the frostiness was not prominent. Others have echoed my experience, others say they have had crosshatching? My view, ACF is crap at this scale.

[@scottybruce4302]

I do like your videos and i think you are doing an amazing job, so keep it up! How does this compare to the GKTwo? is the £715 pricetag worth it over the £450 for the Saturn 3 Ultra?

[@FauxHammer]

Come winter. Yep

[@sonic4life]

My first print had a significant amount of layer lines. Might have been my print angle, but the distortions were more than I expected

[@Rhyds86]

Could you please link the video you mention at around 12:30? Couldn't find it in the description, Thanks!

[@FauxHammer]

Sorry, done now. But it;s in the description too.

[@Rhyds86]

@@FauxHammer Thanks!

[@JetStream3D]

@fauxhammer great video! Any educated guess if ACF would work any better on Elegoo Mars 4 DLP? DLP is much better option than LCD for higher production volume applications, and the increased speed with ACF would make it even more compelling. I reached out to Elegoo directly but no response yet.

[@FauxHammer]

The theory makes sense, but i no longer have that printer, nor a spare sheet to test with,

[@JetStream3D]

@@FauxHammer response from Elegoo tech support: ACF film supports fast printing. The printers we currently use for ACF film are Saturn 3 Ultra and Mars 4 Ultra. Mars 4 DLP does not support fast printing, so we do not recommend installing ACF film on Mars 4 DLP

[@FauxHammer]

@@JetStream3D still might be worth a shot to see if it helps in terms of detail.

[@JetStream3D]

@@FauxHammer indeed, I sent follow up question to Elegoo “Can I use ACF If I use the printing parameters for FEP or nFEP? I am just trying to reduce the film separation force to avoid damaging the delicate geometry I am printing.” Will post response.

[@ger5956]

Would trying to print a “perfect” sphere be of any use to judge quality?

[@spencerk2829]

I’ve been using the Mars 3 mainly for jewellery. My saturn 3 ultra is on the way but just wondering if I can still use any castable resin or is it subjective?

[@YarHarFD]

I have a Mars 4 Ultra. They don't lift slower than 100mm/min. Seems like a firmware issue that Elegoo is not willing to admit that they are troubleshooting. This has made mine essentially useless for castable resins.

[@BlackjackBat]

Similar results on my 3 ultra here, was dumbfounded by your review of the M5s and Mars 4 ultra because I am getting crisp prints on mine.

[@FauxHammer]

Do you have the M5s and Mars 4? Would love to compare notes and get a wider range of results to compare

[@Frankenstein1985]

After testing the Saturn 3 Ultra and the Photon M5S, which one offers better print quality and which one would you recommend? I attach great importance to the print quality and less to the speed, although if both could be done at the same time that would be great. The autoleveling function and error detection on the M5s are great, which the Saturn 3 Ultra doesn't have. However, if the Saturn 3 Ultra delivers far better printing results than the M5s, I can do without the features. So, which one would you recommend to me??? Thank you

[@FauxHammer]

I can answer that exact question in detail on Tuesday in video form, I just uploaded the video today for my members if you are eager.

[@Frankenstein1985]

@@FauxHammer Thanks, I'll take a look at it on Tuesday