The Best RESIN 3D Printers of 2024 - FOR MINIATURES AND MORE - ULTIMATE RESIN BUYERS GUIDE

[@geekverve]

Thanks for calling it out. High quality prints is BY FAR more important to me than print speed. I mean, it's not even close. I would choose the slowest printer available, if it produced the best quality results.

[@Night_Hawk_475]

Pretty much same here - for personal projects even if I'm printing dozens and dozens of minis I'd happily take months to do it through 3d printing if it gave me quality to rival (or surpass) store-bought models.

[@effefffffffffffffffffffff]

On the other hand, I would far and away take speed as my #1 priority.

[@Night_Hawk_475]

@@effefffffffffffffffffffff yeah that's totally fair - I think it just depends on the kind of thing people are printing and what purpose it's to serve. If you're trying to make functional parts then you don't generally need mega tight tolerances or details, it makes sense. And doubly so for anyone trying to mass produce stuff to sell.

[@effefffffffffffffffffffff]

@@Night_Hawk_475 In my case, I would love a decent rapid printer to 3d print temporary dental crowns. Something that could knock out a 15mm tall print in a matter of a few minutes would be a game changer for me.

[@NorthernPaladin5146]

Saturn IV Ultra. I know it's not plug and play but it's virtually plug-and-play. I'm a new hobbyist and this was a very easy introduction to the hobby. Worth every penny

[@awildtomappeared5925]

I have had to help doezens of people who thought that but had issues with the plate that are super hard to improve (can't be fixed). The only thing nearing plug and play are the reflex

[@FauxHammer]

Agreed, I love it. Great machine

[@Gobi-Wan]

Mine hasn’t been easy . I still can’t print

[@georgeyboyhowe1685]

@@Gobi-Wan really you either have no clue or you have not looked at any videos about resin printers they are so easy to use turn on calibrate resin print simple

[@luisca92]

If you can’t get it to print 9/10 you’re doing something wrong and not realizing it. With the S4U I’m able to print industrial quality functional solid parts weighing up to 1kg with no supports printing directly from the build plate in under 3 hours per print. There’s so many variables that are not the printer that lead to fails.

[@Denny-Nien]

Bought Saturn 4 ultra one week ago and already used 2kg of resin. I just assembled it, plugged and started printing. Had to experiment a bit with exposure time and that is all I've done. Absolutely love this machine. Easy to use and print quality is good.

[@Helsfasa]

I’m picking up the Saturn 4 ultra. It’s on sale for $400. Seems to be the best value to quality combo. Between your videos and others is what got me there.

[@Weaver_Games]

It's been on "sale" for that price since it released lol. Eternal sale isn't a sale. I don't know why every single 3d printer does this fake FOMO sale crap.

[@adamjones9717]

Had to return myn insane z crushing due to spring compression

[@TylerTroglen]

Recently got a Saturn 4 Ultra and i'm still printing everything in the world because of how awesome the prints come out. I have 2 Qidi FDM printers and absolutely love them ( Q1 Pro and Plus 4) but small models just aren't great on them. I was terrified of resin but lord, I'm glad i made the jump. The worst part is learning how to correctly support models, which i can say i still suck at doing but i'm learning!

[@TheRobak111]

Hey, I have a small question, if you put two painted models, one from GW and the other from the printer, what would it look like in terms of quality? (Saturn 4 ultra)

[@holycan4234]

GKTwo. My first printer. Best decision ever. Printing is enjoyable

[@ronaldbell7429]

GK and Heygears are the two companies that I find myself looking at and saying hmm...

[@kanubul8142]

I picked up the Phrozen Mighty Revo at launch and have been super happy. I was brand new and had some learning, but figuring out how to support, there is almost no post production. I would agree that the heater is basically useless and I live in a cold climate in winter, hot in summer. Even in the cold it has still printed well. I cannot say that I am as pleased with their curing station. It works great but within 6 months the motor has started making loud noises and i have to start and stop it to get it to be normal. Since they are in Taiwan and I am in US, anything i order has about a $30 shipping cost. Although the resin is available on Amazon. Great printer for the quality, even with the price point, if you can splurge on it, its a newbies dream printer IMO.

[@chaley2935]

I bought a printer finally 2 days ago and I picked up a Saturn 4 Ultra as the HeyGears was sadly out of my league thanks to your earlier reviews so thanks 😊

[@FauxHammer]

Thank you so much for your support, this is incredible. And yeah as I’ve said before and again here! Solid printer!!!!

[@chaley2935]

@@FauxHammer Ohhh, I was Just able to pick up the reflex printer now. My sister-in-law gave me $2,000 for Christmas so I was able to at least get the printer and I picked up an extra screen as well as some resin. I'll just have to wait two or three months to get a cheap curing station cuz I'm sadly on a fixed income of a thousand bucks a month😌 On the bright side I'm on my way to being able to print eventually. And yes, I used your coupon and link 😁

[@LeftHandEats]

@@chaley2935I’d like to submit an application to acquire your sister in law!

[@chaley2935]

@@LeftHandEats I'll take that under consideration 😜

[@zothindemysticsc4405]

I decided to go for the Saturn 3 base. I am decently experienced with fdm and the found a deal for 220eur, so i decided that a basic no fanfare not "automation" printer was best for me, I want failures to be my fault because that means i can fix them.

[@Old_Wizard_Minis]

Saturn 4 ultra is the machine to beat. Sweet spot between price and features.

[@breakupgoogle4584]

"Its a great printer... but..." this is the quintessential line to prepare a person when they are getting their first resin printer because it applies to all of them.

[@erdemergaz6987]

Saturn 4 Ultra. Amazing machine, high quality, fast prints from day one. As an inexperienced user, I was able to print industrial quality looking objects right from the start.

[@88RunnerBlade]

Does somebody own Reflex RS. Can you get the same quality print with 3rd party resins as with heygears resin? If not than I think its better to pick up like three Saturns 4 Ultra instead

[@beebe2142]

All I've used so far is Sunlu standard resin and it works great. No fails yet

[@88RunnerBlade]

@@hylgariss Yes, I saw it but i think he only comapred 3rd party resins amongst themself. What about 3rd party vs heygears.

[@hylgariss]

@@88RunnerBlade I can only talk about the PARP10 as it;s the one I'm currently using, it's not brittle and can print really nice details, and for the price, is a good resin to use with the machine. I haven't tested the High Quality resin like PAP10, it's quite expensive and only got one bottle that I'm keeping for ultra fine detail printing, so can't compare to other high detail resins yet, but will do some comparison when I get to it.

[@88RunnerBlade]

@@hylgariss Dont quite understand what are you trying to say. You mean the prints that you get with PARP10 are of the same quality that you get with 3rd party resins?

[@hylgariss]

@@88RunnerBlade Your question is if the Heygears resin is better in term of print quality, and my answer is no. As long as you use a third party resin that's using the same exposure time as parp10, you'll have exactly the same amount of details. What changes is how brittle / sturdy the resin are, and like I said PARP10 is quite nice and tough, not too brittle. I guess a resin like conjure sculpt grey or Siraya Tech Fast ABS-Like would be similar in feel / quality but cheaper to buy.

[@MrMitchfromtoronto]

So I just bought the Saturn 4 Ultra and this being my 6th printer let me tell you it is BY FAR my FAVORITE as it is the closest thing to "Idiot-Proof" Even my gf can use it LOL ! As for the software I started with the Chitubox Pro 3 month that they give you for free and was so-so happy with it until I tried a trial version of Lychee Slicer Pro then I realized there was no going back to Chitubox. Biggest factor was the supports ! In Chitubox you CANNOT use Zero Penetration whilst in Lychee you can (It is the Default setting). This made a HUGE difference in my prints-I mean HUGE. So my workflow now is to use Lychee Slicer Pro for it's AUTO supports and then I slice it into .CTB format and print it in chitubox (Non-Pro-FREE version) And VOILA ! Awesome prints as easy as Pie !!! He he he me sooo smart LOL

[@campaigngameminiaturesderm7084]

Really interesting. As I am getting much better at doing supports and thinking now of the Saturn 4 Ultra as a necessity this thing with CTB and Lychee could be a game changer. Thanks. If yucan give more details please do.

[@leahannwhite1111]

👍💓!!

[@HorusLupercal90]

I just picked up a saturn 3 ultra for $396 AUD ($257 USD or £203 GBP) with black friday sale and discount code. Wifi, 10 inches, sharp prints, premium metal design and rubber feet and no annoying build plate design like the 4 series. I prefer it to this year's models and for such a discount could not say no.

[@anthonylong5870]

Di you ever get the wifi to work? Mine will show irs online and on my network but Chitubox, Lychee or even Tango. All have fail to connect to printer errors even though they see the printer

[@OldSkullSoldier]

I bought very recently Saturn 3 and it's great. Not on Black Friday price difference between S3 and S3U is very small, so I understand your choice. I do not understand why neither of these 2 printers is mentioned here in this vide if Elegoo Jupiter SE is. Only printers from last 12 months were captured?

[@awildtomappeared5925]

I have an s3u and I tested the uv uniformity to find it down at 32%!!! (8.5x worse than the 92% advertised) if I ignore the sides and treat it like a 7 inch printer then it's 60% I showed elegoo and their response was that the chitu sensor wasn't good enough and I should use one that costs more than the printer which is bs because while the chitu uv sensor isn't the best it's not responsible for this much of an error. I then showed them prints where the brightest spot can cure a 1mm x 2px feature while the darkest can only do 1mmx 4px so half the size, clearly not 92% uniform so they said they were referring it to RND and it's been weeks with no response. Combining that crap with the new awful plates and more, I just can't recommend anything more than to avoid elegoo printers in general (I like the 8k space grey resin though, cheapest high pigment resin by far)

[@HorusLupercal90]

@anthonylong5870 I have just ordered but once it arrives and I do a couple of prints I will let you know.

[@shadowsedgeminiatures1230]

Greatly appreciate all of the videos! I ended up grabbing the Saturn 4 Ultra based on your videos (and used your link!)

[@Grave79]

I use exFAT formatted 64GB flash drives with my Elegoo Saturns with no problem. Even on my 2 yr old Saturn 2. Format the flash drive using Rufus (non-bootable + MBR options) and it will resolve all the formatting issues other methods don't which often lead to print failures. (I still bought the Reflex RS and after a bumpy start, really do love them, so thanks for introducing them to me).

[@FauxHammer]

I’ve never used Rufus l, only windows format tool I shall try, thanks for the tip

[@Antheraws]

Hey I was wondering if anyone had recommendations for a first time buyer on 3D printers. I live in the PNW and will be setting up my space in the garage which averages 40°F in the winter. I was thinking about getting the GKtwo cause it's highly regarded and has a heated vat. Also your video pitting it against the saturn allowed me to see how nice the build quality was in comparison. Just leaving a comment to ask what printer and curing station you or anyone else would recommend being a first timer and having the workspace above. Thanks.

[@Workingpour]

Im gonna grab one of the GK2 today with your code. The price the build volume the quality and the heater. would really like auto fill, camera monitoring/phone notifications with a light but that'll be the next time i get a resin printer. P.S. first resin printer wish me luck and happy holiday

[@Luca__]

I just bought a GKTwo a few days ago, so perfectly timed video 🤣 But still, thanks for all the work you put into this, it shows!

[@HideoGojira]

Got the Saturn 4 Ultra 2 Days ago and I've been loving it so far. Also it looks so futuristic!

[@ehabulous]

Pulled the trigger on the Heygears Reflex RS this morning, not a fan of the closed eco system, but and Big BUT if it means taking the hassle out of dialing in resin, less failed prints, consistent results, then that is trade off I'm willing to accept. Already have 2 GKTWO and I love them, and was gonna go with the GK3 Ultra until I saw yours and others YT videos on the Heygears. Thanks always for your honest assessments.

[@3d-resin-dude]

What was the room temperature and the the resin temperature when prints failed? Also about the white residu, did you mixed the resin properly? Resin tends to seperate after standing still for a long time. I'm printing resin for 2 years now and had way worse experience with both different kind of resin and multiple printers. So compared to that I think you did very well.

[@JerryBWagoner]

Great video, and it's has been a crazy/amazing year. I'm only in year two of this rabbit hole and it seemed like just yesterday everyone was clammering for the industry to get away from the resolution battle and start giving us more features...wow...have they. For me, first it was the Photon Mono 4K, then this year the GK3 Ultra. This winter it will be a mid-size, just to complete the collection. I was thinking about just creating a GK branded shop, but the GK3 has been an ongoing project in tying to get it to produce results, meanwhile, that little Mono 4K is an unrelenting workhorse. This have me considering going back to Anycubic and that M7 looks to be everything I wanted the M7 Pro to be. I'm not buying until December, so I still have time for the GK3 to impress me. I will say that it's build quality makes the Mono feel like an Easy Bake Oven. :)

[@HeyyoPasso]

I have 2 original mono x 6k machines and print a lot of tabletop stuff from small to decently big. Looking to upgrade and consolidate a little and leaning mostly to the m7 maxhayou mention quality drop off for smaller items due to the larger screen but in your opinion is it very noticeable on say a 40k mini vs a flat panel like you've shown off in the video?

[@tr4ck_day]

I bought a GK3 with your affiliate link 30 minutes after you released your first vid on it. Been absolutely loving it so far

[@FauxHammer]

Glad you enjoy it!

[@eduardowt]

Heyyy! Been binge watching all your videos in search for the best printer upgrade for me. I’m a dentist and have been working with a Photon S for the past 5 years. It suits me well in terms of overall quality but I wish to go a step further and look for better detailed prints. I mainly use the printer for mockups and implant surgical guides, in most cases it’s 2 or 3 piece/print, so the printer bed size wouldn’t be such a dealbreaker. Print speeds do matter sometimes since it does make a difference when print fails overnight and I need to rush results. I’d say print quality matters, but not as much in a real-world scenario since the photon S has been just fine. My main options for upgrade would be the Photon D2, Mono M4 Ultra or Mono M7 Pro. Which would you recommend most? I see that the M7 Pro is your fav for 2024, it would provide a bigger printer bed with premium features that the D2 might lack, but this last one also delivers sharper details with maybe faster prints and a simpler experience, right? The Mono M4 Ultra could be a cheaper option in between those two, if I’m correct? Please give me some light to this 🥹🙃

[@BLINDrOBOTFILMS]

I've been doing research on getting my first printer and I was planning on getting the Mars 5 Ultra for seeming ease of use, quality and nice features, but I'm pretty sure this video and the comments just upsold me to get the Saturn 4 Ultra instead.

[@GarryWButler]

Thanks, Ross! I WAS about to pull the trigger on the GKTwo... but Now I'm going to have to wait to see these new ones.

[@FauxHammer]

When I grew up, my parents always used to tell me to eat my food before it got cold. My parents were smart people.

[@davethepak]

There will always be a "new one" - just buy it.

[@ronaldbell7429]

@@FauxHammer It's the perennial problem in tech of course. There's always something new coming. But when it's juuuust about to be announced, it's paralyzing. That's probably how it ought to be though ;)

[@japhetaguirre4880]

Finally bought myself a 3D resin printer. It's the Saturn 4 Ultra. So far, it's good and you can print out of the box with just a few setup. A lot of fails though due to me being a newbie in preparing the 3D files. Any suggestion for the correct exposure setting for clear resins? I couldn't find a definitive answer online and even here in KZbin.

[@GT-dq4uz]

hello, congratulations on the video, a summary was needed in the chaos of 3D printers. However, I make a note on the concept of the dimensions of the printers that you expressed. Generally, printers are around 10" and it is a good size mainly for miniatures or at most for human models or similar in scales from 1/9 -1/10 and up. I say this simply to take into account the printing times. We know very well that if we want to avoid hours of sanding and post-production, the models must be vertical, so if we consider a human model or similar in 1/6 scale which tends to be the most used, also for reasons of practicality in painting the details. We will find a 10" plate to be effectively "monstrously" small for all the components of a model, especially with the base included. This means that on a 10" LCD with a plate of about 218*222*XXX for a complete 1/6 scale model we have to think about 3/4 total prints, with an average of 6 hours per print we have approximately arrived at 24 hours of total printing, which is really a huge time in my humble opinion. For this reason, I believe, that a 12/13" printer can help to halve the printing time, since we will find ourselves with only a maximum of 2 prints of 6 hours, if not even a single print with small bases. Of course a Gk3 or an M7 max for miniature prints makes little sense, unless you have to print an entire collection of miniatures including those of your neighbor.... In conclusion I don't think that a 12/13" printer is mainly suitable for large-scale printing, on the contrary, I would prefer it to a 10" to optimize printing times, if manufacturers invested in NOT losing quality with larger LCDs it would be appreciated. Bigger is Better ;) by @Artein3d_

[@ckling217]

Do you still feel good about the GKTwo at the clearance price? I used your discount code for it over the weekend. It will be my first 3D resin printer. Thanks in advance.

[@dannysoni3518]

Which is the best printer for jewelry work

[@lawcreations6805]

I just purchased my 2nd saturn 4, not the ultra. Great printer, user-friendly, and produces fantastic prints!

[@andyfirthbespoke]

Here's a question from a newbie....me! I work with hardwoods and epoxy resin and I've started putting small Star Wars ships into some of my work like river tables. At the moment I'm old-schooling it by casting the ships in home made silicone moulds but it's very messy and doesn't always work. So, I'm looking to buy my first resin printer. I only need a small one and had the Elegoo Saturn 3 12K in mind. Would you recommend this one as a good starter printer? Any advice would be great appreciated.

[@captainamiga6813]

Does it make sense to buy an UniFormation GKtwo at the end of 2024 or is the GK3 the better choice?

[@madosa.customs]

I am looking at new printers right now. For one I might need to replace my Emake3D Galaxy 1 since that one was getting LSU issues and hasn't been working since August. Communication and support with Emake3D is slow and I'm not sure if the issue will be resolved eventually. I mainly used that printer to print bigger statues in 1:4 scale and was thinking of replacing it either with the Uniformation GK3 Ultra or the new Anycubis M7 Max. I also need to replace my Anycubic Mono X for smaller prints like 1:12 scale action figure heads that need to be crisp and very detailed. Which would you recommend for the bigger prints between GK3 Ultra vs M7 Max and which smaller printer would you recommend to get the best detail possible?

[@samdaniels4961]

Hey, Awesome video! Im a little overwhelmed. I had a anycubic Photon Mono that has just packed it in. I mainly use my printer for basing bits or printing models for My D&D campaign. Im looking to spend 500 or so and if I can get a wash and cure station with that, that would be awesome. What would you reccomend for someone that uses the printer 1-2 days a week for 2-3 prints? A good/big print bed is always a winner and less fidly the better. Thanks in advance

[@lejezza2492]

Got myself the saturn 3 ultra on sales. Struggled a bit at the beginning, making a bit of a mess. All dialed in now and I am really happy so far.

[@FauxHammer]

Nice. Hole you’re loving it!

[@donjohnson19]

just looking around trying to find a nnice one that will work in my apartment thinking about the elegoo saturn 4 ultra love your vids man you actuily helps me really want to get into resin printing more

[@jamessalisbury3320]

I print jewellery with bluecast x1v2 resin. The release liner that comes with Saturn 4 ultra has to be changed to 0.127mm The factory 0.150 is too stiff and detail is lost and majority of the time, failed prints. Change the fep and sand the plate and I’ve not had a failure since.

[@leahannwhite1111]

Can you point me in the right direction on how to go about doing this? I'm wanting to print jewelry prototypes & molds, too.. for sand casting and first of all, I can't decide between the Mars Ultra 5 and the Saturn Ultra 4. I was thinking Mars will allow for better small build detail but now I see your comment & you say it's possible to use Saturn 4 Ultra for jewelry if you make these revisions. Can you tell me where or how I can accomplish this same thing as you? Thanks so much! ❤❤❤❤❤

[@jamessalisbury3320]

@ hi, to be absolutely honest, I don’t use elegoo anymore. Especially these new models with tilt release. I get successful prints but I just finer like them anymore. I’ve gone to phrozon now. Mighty revo. I still have to change the fep to a finer grade to the one I’ve mentioned. But it’s far better quality built machine than elegoo. Elegoo good for cheap parts. Have you seen how to change the screen on the new elegoo printers?

[@carstenschuetz4709]

I am completely new to 3D printing and have informed myself by watching a variety of printer reviews. Your videos have been most helpful for me to make my decision to buy the uniformation GK2 printer. I am very happy with the machine. It is simple to set up and produced very good results from the beginning. I picked the GK2 because it was supposed to have good print quality (which is true) and comes with an internal heating and a build plate that is easy to handle and to clean. The final decision was between the GK2 and the Heygear Reflex RS. I decided against the Heygear Reflex RS because of its proprietary eco-system. Obviously you can use resins from other manufacturers, but these videos were not out by the time I made my decision. I dislike to be completely dependent on one manufacturer. This leads me to one question: If the UV light source of the printer has to be replaced from time to time, do you have any insights, for how many years manufacturers offer replacement parts, after the printer has been discontinued? P.S. Your german prononciation is fine. Keep on going!

[@Paul_Johnston]

I've been looking at the GK2 for my first printer, everything I've watched makes it feel like it would be the best one to get but with something new on the horizon and from what I saw in the chat about its support going away in the somewhat near future, makes me want to wait to see what they have next and then go from there.

[@DragonclawMakerStudio]

Same thoughts here. I was ready to buy the gk2 system but now gk3 is coming out but the lack of support and parts for gk2 has me apprehensive.

[@blackhand9581]

Since you mentioned it at the end of the video.. I'm not so much as looking for a printer. I've finally decided on the Mars 5 Ultra after numerous recommendations from various 3d printing groups. According to them, its the most out of the box one could get as far as SLA printing is concerned. Downside is that I live in a one room apartment. The printer hasn't arrived yet so I'm preparing for its arrival. I'm looking into getting grow box with a vent sucking the air and out a window. That being said, I've been met with incredible amounts of hostility when I mentioned this and had realized that owning a Resin printer is very prohibitive. Should I just cancel my SLA printer or should I go with building a corner for it?

[@FauxHammer]

Unfortunately the long terms health risks of having resin fumes around are unknown. I hope it;s obvious that you should never physically touch the stuff. But yeah if you are gonna have one in a one room apartment. you may be best to pump the fumes out, just be aware it pumps the heat out too,

[@blooper1098]

Love your insight and willingness to share candid advice.

[@rigocuellar5964]

Hello, I’m completely new to the world of 3D printing and I’m trying to take my first steps into and buy my first one. I’m trying to make miniatures for my D&D campaigns as well as maybe a few small toys for my kids. I’m trying to get into the hobby and my budget is definitely not the best but I’m not trying to make perfect things but I would like to be able to paint them and have them look nice. So any recommendations would be heavily appreciated!

[@bobbyvaughn7136]

Hi Ross, I am blessed to be able to purchase the GK3 ultra whole eco system, for my first printer, and very glad people like you are here to help understand this type of products. Do you know of any videos to help me setup the right setting to get the best prints out of the GK3? Thanks.

[@paullancaster297]

So up front think I would be described as a Anycubic Fanboy - started with the original Photon, then moved up to the Mono X 4k, finally getting a M3 Max. Now I get the resolution debate (always have) and my printers are all roughly the same pixel size. This year it was time for an upgrade, and I'll primarily blame yourself (there were quite a few others involved) but I broke with the faith and bought a Saturn 4 Ultra, and to be honest I'm blown away with it, especially the network send printing function within Chitubox. The speed and print quality is in another league, now I'm using the same resin with similar-ish cure times, the difference being the tray mechanism of the Sat 4 ultra. I'd have loved to be able to justify the Heygears printers, the build plates look great especially compared to the Sat 4's, but for the price I could get 2 or 3 Sat 4 ultra's. Anycubic for me had me hanging in anticipation on the news of a new Max printer, unfortunately the only real gain I'd get with the M7 Max over my M3 Max is a heated vat, and I've already added a band heater to the M3 Max. What I wanted (and would have paid for) was an improvement in pixel size or bed size. Enjoy your holiday and look forward to the nex installment of Fauxhammer world

[@hablandobochinchepodcast]

I’m stuck on the gktwo , Saturn 4 ultra & the phrozen sonic mini 8k s , what has the best quality on prints? Idc the speed. I just need a response for this Black Friday sale so I can go and make my choice 🥺🥺💪🏽 hoping to hear back soon. THANKSSSS for your long videos I’ve watch all but hard to tell your choice as to what’s better etc in quality

[@FauxHammer]

If I gave you all 3 of these printers for a week and you printed as many models as you could on each of them… and after that week l, I printed a model 3 times, once in each printer. and asked you to tell me which print was from which printer, Based on print quality…. I doubt you would tell them apart. I say look at the extra features around the printers like heaters if you need ten. Extraction ports WiFi and webcams. Decide which features you want and if you’re willing to pay that for it. Get the one that ticks the most boxes for you.

[@hablandobochinchepodcast]

@ I love the auto leveling , I can care less for the camera.

[@AronFigaro]

So as someone not just doing minis, but doing industrial prototyping and positives for industrial parts casting: what's your take? We're looking at the Halot Mage Pro, since we're mostly a creality shop, but firmware RERF on the anycubic printers is attractive. Then we hear a bunch of stuff about elegoo. Right now we have a trio of first-gen Photons in the lab and they work, but they're ancient, and we're running out of spares for them.

[@arquit3d]

Very great and comprehensive video. When I thought I was done with Anycubic, it seems like they have outdone themselves. It's just scary though getting new printers, knowing that new models with many more features will be released within the next couple of months, maybe 4-6 at most. Chasing the last technology is always a never-ending game. Thanks for keeping up with the videos!

[@oroszlan5048]

Hello, I’ve been REALLY obsessed with that Japanese mask that you show at the end. I can’t find a way to contact you online (I don’t have social medias) but is there anyway to find it somewhere!??? Whether even buy it like this or just the file???? It’s just so perfect!!! Thanks again for helping me on choosing a printer!!!

[@DragonclawMakerStudio]

Love your videos. Learning a lot. I need a built in heater. I need ease of use and decent prints. I plan to run a project 1-2 times per week. Not my major tool but just something for fun with the kids. I am leaning to the GKTwo. However a couple questions: 1. If I have some projects that really would be small enough for a Mars5, is the GKTwo overkill? I want to go big in case I ever need it but don't know if bigger will make small pieces worse. 2. Should I be concerned that the support/replacement parts for GKTwo are being discontinued at end of 2025? (according to their facebook). I don't want to have to buy a new printer each year just to keep up.

[@DevilsWings]

I love anycubic. I had a M3 Max and it was perfect but very slow. Got the M7 Max and can´t wait to start printing with that. I mainly print huge Models because why not right? And its just perfect and it doesn´t cost a arm and a leg and is just good enough in details.

[@user-hr1rw7zy4i]

hi all - what printer should I get for super high quality RESIN miniatures that prints SUPER fast and has a LARGE bed? thanks!

[@Gwenx]

Uniformation GKT2 was my choice, after ALL the review videos and comparisons i have seen i just thought it was perfect for me, not too expensive, and great quality and features! I have an Anycubic Ultra, and i just found it is too small for the things i wanna print.. It has been working fine, but i have had to change the settings a lot and stuff to make it come out good. I would just like to have a bigger printer, GKT2 are within my budget, i can lay double that but then i would have absolutely no budget left, I'm looking to print minies, busts and maybe cosplay pieces. I live in Scandinavia so it get cold, but i am also printing inside my home, thus also the reason i cant have a machine much bigger then the GKT2.. Now, i will have to wait for the new printer they have to be released before I'm making any purchases! I can also see the offer is not yet implemented on their website for the GKT2 haha 😅

[@LeftHandEats]

The offer is ABSOLUTELY on the website now, I’m looking at it.

[@dwightlee4315]

I will be purchasing my first Resin printer in the next 30 days, watching this with great interest

[@befoot]

I have so many questions...but I'll try and make this short. I have never 3D printed anything, my main hobby is making model cars 1/24 to 1/12 scale. I'm seeing lots of great upscale parts that need to be printed. is this something I should look into or should I run away fast Ha Ha...this is black Friday week so I was thinking of picking up a printer but not sure what I should be looking at...any help would be appreciated

[@FauxHammer]

I think it would be best to go through this playlist and watch what you are getting yourself into kzbin.info/aero/PLngF4BVc8PpGi9_y_kIIl7xIbFPMRMr2H

[@befoot]

@@FauxHammer Ross thanks for link and all your hard work, I'm learning lots... Cheers from Arizona

[@befoot]

@@FauxHammer Wow! that is a lot of info...so I hope I chose well ordered a Anycubic Photon Mono X 6Ks thanks for the discount code

[@gravballemandendk]

dont knwo if i should keep my gk3 ultra preeorder (that is yet to be shipped) or cancle it and wait for the new uniformation printers....

[@FauxHammer]

Keep it

[@alfredanil]

Looking at the current trends, I think they might be comming up with a force sensing bulid plate for their upcomming printer. Wish they could have this force sonsor in their GK3, maybe futue GK3 pro.

[@gravballemandendk]

@@alfredanil im a little concerned with the many level problems people are getting on the build plate, so yes... its weird that was not picked up before.

[@alfredanil]

@@gravballemandendk Camera is clearly visible, so remote monitoring will be possible.

[@gravballemandendk]

@@FauxHammer you dont think the better avc size and the fresnell lense will give better results on minis?

[@ElCasualGer]

Would you guys go for the Mars 5 Ultra, Mars 4 MAX or any of the Saturn 3 versions?, I'm looking for a new one and these are around the same price range lol

[@ThomasAnton-fr2hl]

This is incredibly informative. Thanks for being so detailed! I’m curious, for specifically the mid size printers, what do you think is the best value Black Friday sale you’ve seen?

[@comunistaverde2180]

I'm going to buy my first resin printer. I'm unsure between the Mono 4, X 6ks and Saturn 2

[@kariko07]

I just upgraded from the Mars 3 Pro, as my beginner printer, to the Saturn 4 Ultra and I’m blown away by the speed and quality.. a few niggles but nothing major.. love it! Used up 5 of the 10ltrs of ABS it came with already!

[@avinashpanchal485]

Which printer best to prints jewellery designes ?

[@leahannwhite1111]

Yes, please tell ??? Thanks!

[@Trident_Media7104]

FDM experience only and I want to go resin for D&D minis and terrain sets. What are your thoughts on the Anycubic Mono 4 Ultra Paired with the Anycubic M7 Max?

[@cotyplays2122]

I chose the Saturn 4 ultra, from every review and video I’ve seen it’s one of the most beginner friendly. My only gripe would have to be it doesn’t have a built in heater(I get it on Christmas I can’t wait to get started)

[@RocktCityTim]

I'm still on the fence with my update plans. I have 2 Mono X 6Ks units that are working wonderfully, but the added size of the GKTwo and the M7 Max are quite the temptation. As for Creality - what's happened there? I still have a fully functional LD002H and use it for many smaller items (32mm Loot Studios Fantasy) with very good results.

[@keinekunst6397]

I've ordered the GK3 Ultra because i want to do only a few print sessions a month while still pritning a lot of minis.

[@AG-x4r]

Allright, i can't decide; M7 regular or S4U. The only thing holding me back from the S4U is that i can't find any intell on weither the 'auto level' system could result in less dimensional accuracy. Even when not printing directly on the buildplate. As in; if supports aren't accurate, would that also effect the accuracy of the model that's supported? If anyone could share some insights on that would be really great! Nice and helpfull videos though!

[@bubumon81]

Hello! Can you please tell me where to find the model at 12:44? The undead with a scythe, thanks.

[@VANUSUAL]

How do the higher-priced models in your overview compare to the Formlabs models?

[@thatblastedsamophlange]

Mars 5 Ultra here - It was a matter of price, size, and the speed - I test print/prototype all my miniatures, so having extra speed is a good thing for me.

[@thomasbeebe3375]

Hello ... getting into resin printing for 32mm tabletop minis and maybe some larger (still tabletop sized) ones for painting/modeling... looking to get the best bang for the buck and not get something thats overkill for the size im doing... Any reccomendation would be greatly appreciated

[@miguellopez3392]

Elgoo mars 5 ultra is a good choice for a beginner printer especially for 32mm minis, provides one of the highest resolution densities as well as decent speed and good reliability from tilting vat. Photon mono 4 is also a solid choice and cheaper.

[@takumonju]

Given the Gk2 is the same price as the Elagoo Saturn 4 ultra which would you pick?

[@FauxHammer]

I would personally pick a GKTwo, but I would miss the speed of the Elegoo a little

[@savageswagg]

Been waiting on a vid like this for a while! Great stuff! I've been out of the scene since my phrozen sonic mini, like not even 4k version. Your channel has really brought me up to speed quick, so thank you!! Do you think the GKTWo is really at its lowest price point now? I live in a really cold climate and it's the only printer I think will be suitable, but I'd hate to see it on sale next week lol

[@idkzero]

i want a printer.. but i live in a studio with a porch. i could technically vent out "smell" from to the porch.. but I don't have huge room. what printer would you recommend?

[@Trond_Karlsen]

Overwhelmed by the amount of info and specifics I am in awe of the sheer knowledge displayed! However, as a total noobie to 3D printing, I´m still a bit confused as to which printer to get, and what all this info means regarding my requirements. I`m planning to print many HO-scale models simultaneously, everything from cats to houses (complete or in parts). Looking for a medium printer preferably not more than $800-850 where print time has no factor and details are everything. Could you recommend a printer for me?

[@miguellopez3392]

The most detailed medium scale printers are $400-$600 as they have newer high resolution screens, i would recommend saturn 4 ultra, i have the mars 5 ultra and it's very intuitive compared to the 2 other printers i owned from anycubic and phrozen.

[@longpal]

I picked up a Mars 5 Ultra maybe 2 months ago as my first resin printer as it fit the budget and need - little bit of a rocky start, but I got my head around it and am now enjoying it for all my needs (so far)

[@lukesdaddy8263]

I need advice. I cancelled my Uniformation GK3 Ultra after a lot of contemplation. It has everything I wanted in a printer. I would purchase the Heygears RS but the build plate is too small. What is important to me is mechanical accuracy, ability to use engineering resins, and ease of cleaning. I rarely print miniatures. Budget is no more than $3k. I have a Saturn 3 Ultra but the screen went out a couple of months ago and Elegoo has been out of stock since then and not communication on when they will get another one. Thanks, and I love the channel and your humor.

[@ClownedandPound]

Have been looking into 3D resin printing to get in to Trench Crusade. Thanks to your video I ended up going for the mars 5 ultra. I think for a newbie it seems the most straightforward from box to good prints

I've followed your videos for a while now and unfortunately my good old Mars 2 Pro decided to give up a few days ago, so, I watched a few of your videos again and decided that a Saturn 3 Ultra is the way to go, the Mars series aren't an option since I strugled with the build volume a lot on my Mars 2 and didn't print a few things becase of that and atm it's just 50 bucks more than the Saturn 3 with added Wifi which will make my life way easier. so what do you think? Is it a good choice?

[@Edber97]

good video, it helped me to consider options but I still have a doubt.... I currently have a photon mono 6ks, I use it mainly as a hobby to print anime figures and some other piece of minimum 10cm high, the highest I have printed is a 2B of about 45cm high, and I want to print more figures, so the size is fine and the quality is good (or so I think), but I have doubt whether to change for a saturn 4 ultra for a little more quality and print speed, is it worth the extra expense? Is the difference enough or I wouldn't notice it so much? because printing very high parts takes a lot of time and I also want the printing to be as perfect as possible so I don't spend a lot of time to make it look good.

[@urmoderngamr]

Hey I got a genuine question, outside of size of the prints and price, is there any major disadvantages to getting a larger resin printer?

[@tenabrae]

so torn... do I get a base m7 and hope I get a good one... or do I buy 2 saturn 3 ultras because they don't have the screens anymore but 2 is like, every spare part.

[@Spadie]

My fiancée and I got the Saturn 4 Ultra in September and we have been absolutely loving it. If the house burned down tomorrow and the printer was incinerated, I would get another without hesitation. I totally get the gripes about the build plate, especially the retaining resin thing. But damn it's a small price to pay for me! Thank you for the video, great to see all the other options out there in a single video.

[@alexwat5433]

Nice vidéo! You narrowed my choice between the elegoo saturn 4 ultra and phrozen mini 8k s. I wish this last one had a medium size version. I am looking to get starting in printing after 6 months of lootstudio sub! Also the Elegoo saturn 3 looks like a good deal now without much draw back.

[@herrnerdmeyer3638]

I'm torn between the Saturn 4 Ultra and the Mono M7 Max. I don't need the huge build volume, but it's handy. I want great detail and quality. But I really need to heat my resin somehow. In the winter, I print in 12-15°C. I can rig up a solution, but I feel like have a build system is just nice. But I pay extra and the detail is a little worse. If you have any advice, hit me.

[@giroadster]

I have a brand new Wanhao Duplicator 8, never used. I am ready to resin 3D print now, is that printer compettitive with newer resin printers or should I consider getting a new one? Thanks!

[@MomentalnoVMore]

Wanhao Duplicator 8 is obsolite printer. Of course, you can probably print something. You know better what you want to print on it.

[@giroadster]

@@MomentalnoVMore Thank you very much for your reply. Is the Saturn IV Ultra comparable/better to what the Duplicator used to be?

[@miksteruk]

I have just ordered a Mars 5 Ultra as my first 3D printer and some additional FEP film, i have watched your vids and i hope i have made the right decision. I am only planning on printing games work shop sized suff and even then just addons for things i dont like (like Tau rocket pods *yuk*)

[@TheDentalHobbyist]

Great work, as always. Your videos are definitely a go-to for me to get some perspective.

[@Red2k4Intrepid]

Looking for a first printer for me and my kids 10/12. No real idea what we want to print, figures has been tossed around, just want to get into the hobby, any recommendations?

[@camerontraer3136]

Hey! I'm a 3D Artist here, looking to take my models I make and print them. But not sure what printer would be the best for me... I don't know too much about supports, so if there a system with a slicer software that is best for auto supports? Also, what can I do about fumes? I have asthma and am worried I'll get sick from the fumes. And, what do I do with my resin wash? Since you can't throw them down the drain. I live in Canada, so it gets really cold in the winter. Looking for something around the 4-500$ CAD range Thank you~!

[@Inventureology]

Thank you for the info FauxHammer! I went with some on sail AnyCubic Photon Mono X2, I am wondering if you may be able to suggest a good online location to buy their 9.1 inch LCD Screen for Photon Series On the website it says Regular price$99.00, but I don't see the X2 available on their website, also no 9.1 inch X2 LCDs on there anymore, are there any good locations to find a 9.1 inch LCD?

[@stevebuk100]

Hi Ross, my brother is buying a Bambu A1 at christmas, is it possible to print 28mm Historical figures on this printer..

[@zestybomb]

Is there a way to replace the build plate on the sat4U? Preferably without voiding the warranty? lol

[@nomojo1110]

re: Elegoo's current Ultra's and their initial layers inaccuracies. Could the visible flex of the build-plate from excess force (build-plate & screen interface) be responsible? Regardless, your experience and observations are greatly appreciated. Thankyou 🤘

[@rafaelsibila6306]

So where can i download or purchase that file or the wall piece? or the mask? Thank you

[@RikiB]

Hey FH. What are you using for rim lighting? I think it ads a very nice touch. Also I just got my gk3 in the mail with the wash/cure and it’s massive. Can’t wait to start printing with it. Just need to figure out the ventilation setup first…

[@the_real_kai_ray]

i get the coments for the rs and heygears but i just got one because i want to print with little hassle, so i can do my main hobby of painting

[@FauxHammer]

And that’s totally your call to make!

[@bjf10]

I bought a mars 5 ultra as my first resin printer, and in general I really like it. The multi-layered build plate doesn't really bother me; I printed a 45° build plate holder on my FDM printer that helps the vast majority of the resin drip off (use the drip tray if you have tall models on the plate). The quality is fantastic and the machine features in general are great. I do now wish I had bought a Saturn 4 ultra. I almost did, but it's bigger than the spot I wanted to put my resin printing setup (printer + wash/cure with venting and a tent), whereas the mars just fits. After going through a few kg of resin, a bigger build plate is looking nice enough for me to think about figuring out a new setup.

[@bjf10]

Personally I do not care about phone apps or cameras. Chitumanager on my PC is fine.