Build A Smart Dolly Vehicle Combine Mini Crane | Tips to Build Rotate Crane

[@jaygee9249]

I think that is good enough to win the Noble peace prize for fabrication

[@fawabros]

Many thanks for your compliment!

[@danielgonzalezmendivil8025]

Va

[@ohcrap3263]

I want one of these, for absolutely no reason!

[@fawabros]

I don't sell. Sorry!

[@CrusaderSports250]

Very interesting build, I would have put Akerman geometry on the steering so the wheels turn correctly relative to each other, the rest I would build as you did. One thing in your use of the crane, never choke your lifting wire, always use a strop, (you could make a box to sit underneath to hold strops and chains), choking the wire damages it and can cause it to fail eventually, stay safe so we can watch your future builds.

[@fawabros]

Many thanks for your useful opinions!

[@continental_drift]

Agree about the steering. I didn't know about the wire, thanks for the advice I'll keep that in mind. Cheers.

[@ГамлетМакян-т4ж]

Э Хэхэ

[@Subgunman]

VERY NICE BUILD! You could add one or two fold out outriggers with feet you could lower on the side where the crane mounts. This way you can prevent the cart from tipping over if the load is too much for the crane side and if you have to unload on the crane side. Love the locking brake on the front wheel, excellent idea!

[@fawabros]

Many thanks for your advise!

[@ΔημήτρηςΚαΐτσας-ρ5β]

U⁷788i

[@alexsandrodasilvasilva3134]

Ç Lp

[@constantintanca6401]

Sfj

[@motche6868]

you have wonderful hands and brains, creating useful products, looking forward to interacting with you, thanks

[@fawabros]

Thank you so much!

[@fawabros]

Thank you so much!

[@charlesonyango5608]

I'd like to know what the 486 people know that I don't know. This is brilliant. Thanks for sharing.

[@fawabros]

Thank you so much!

[@АндрейСтракашин-ж7о]

Огонь. Шикарная работа. Мастеру браво и респект. 🔥🔥🔥👍👍👍👋👋👋🤝🤝🤝

[@fawabros]

Thank you so much!

[@donatocamacho1731]

@@fawabros 1111

[@AleksandrVasilev.]

Эта перемычка 100 кг не весит , всегда такие руками ставили в проём , а эти поднять не хотят . И как он собрался на этой телеге по стройки ездить . Тот кто не строил - тому шикарно . На стройке когда перемычки ставят - ровных стяжек ещё нет , а все перемычки лежат на улице рядом с плитами перекрытия , их надо в здание по ступеням занести , на ровный пол положить( которого ещё нет ) , потом на улицу вынести , и краном положить , ну или как всегда руками , лучше верёвкой и вчетвером , по 50 кг на человека нормально , значит перемычку на 200 кг ложат руками.

[@stenor]

My grandson would love that, nice job..

[@fawabros]

Thank you!

Rất thích,Hoàn toàn tuyệt vời xây dựng! Rất ấn tượng với kết quả cuối cùng!👍

[@fawabros]

Thanks!

[@papachupet]

Very creative idea thanks for sharing this new friend

[@fawabros]

Thank you so much!

[@Sergey-Alekseenko-qk6mf7te7j]

Вдвоем перенесли бы этот столбик без тележки. А тележка мощная.

[@fawabros]

You're too strong!

[@dds8586]

👍👍👍👍👍👍👍 !!!!!!! 🔥🔥🔥🔥🔥🔥🔥

[@miguelrivera2751]

Hola me gustan sus ideas para poner a trabajar el cerebro un saludo desde Iztacalco cd de México felicidades

[@fawabros]

Thank you and welcome!

[@scottr.hampton2474]

Looks great. One small point... Ackerman angles on your tie rod ends. Will make the cart steer better.

[@fawabros]

Many thanks for your advise!

[@xuanhainguyen5468]

thông minh và sáng tạo,cảm ơn anh

[@fawabros]

Thanks!

[@munnirchanel4404]

Manteppppp mas bro sangat bermanfaat sekali.... Semangat dan sukses selalu mas bro Salam sukses dari kalbar mas bro

[@fawabros]

Thank you and welcome!

[@danielribera2484]

It lacks some extendable supports to avoid tipping due to displacement of the center of gravity. The cranes have four extendable arms that increase the safe surface of the load movement. I would have put the crane in the middle just above the front axle. You could have designed the same car without so much height to the ground (it is not necessary to lift the load so much to move it). For the rest, this is very good. Congratulations for being so creative.

[@fawabros]

Many thanks for your opinions!

[@eyesofagemini7715]

So what gives a given vehicle its strength? Is it the gwv or the materials used as the reinforcements to support such a load? Lets say we have a typical car, say panda @ 3,800. 4banger 220hp, 200pf, how much could this said vehicle pull or lift with a prefabed harden steel bracket modified at some point where the unibody frame is structurally sound? I ask because you seem to be knowledgeable about crane tolerances, booms, lifts, ECT. Im trying to understand these tolerances that are sometimes given for safety, but can probably exceed there limits if reinforced by fabricated brackets like a winch plate or something chemically engineered to flex, bushings/ spring loads that withstand major forces & remain intact.

[@Нурик-ш2п]

👍

[@Нурик-ш2п]

👍

[@Нурик-ш2п]

Күшті

[@ETV1970]

Хороший подъёмный кран

[@fawabros]

Thank you so much!

[@projectbuild9784]

Absolutely brilliant build! Very impressed with the final result!

[@fawabros]

Thank you so much!

[@МЕХАНИК1973]

Да получилось круто. Отличный ролик. Авторы на славу заморочились лайкос за сторания 😎👍

[@fawabros]

Thanks!

[@prakashnelajeri]

It's very useful to lift and transfer heavy things like hard metallic in the corner

[@fawabros]

Yes, sir!

[@miguelrivera2751]

Me asombra la técnica y la facilidad con que aplica la soldadura de argón tig hojala y diera una cátedra en la aplicación de sueldar un abrazo fuerte de su amigo saludos de Iztacalco Cd de México gracias

[@fawabros]

Solo escondo el polo negativo del soldador. Puede consultar los parámetros de esta máquina de soldar: bit.ly/3zRuNUY

[@teamidris]

If you build one it will drive you insane for falling over. You don’t need a rear axel bar, so make it so you back it around the load, like an engine hoist. You lift the weight up within the wheelbase, throw a couple of planks under and lower it back down. I know this because my home made mobile garden crane is an unstable beast. Useful, very useful, well worth the building, so make one like the one in this vid with a mod so that it is stable :o)

[@fawabros]

Many thanks for your opinions!

[@ابومحمدالحداد-ر2ب]

٠٠٠٠٠

[@marcelofranciscodasilva7332]

Muito bom projeto, caprichado, útil. Valeu pela postagem, parabéns! Saúde, paz e sucesso, Deus o abençoe!!!!!

[@fawabros]

Thank you so much!

[@jbodden6977]

just three words... center of gravity

[@speakenglish5543]

You are really an expert.

[@fawabros]

Thank you!

[@joserodolfoaguirre4937]

Excelente trabajo muy útil gracias por compartirlo 💯💯💪🏽💪🏽 saludos desde Argentina 🇦🇷

[@fawabros]

Welcome and thank you!

[@jorgeillanes2731]

ZARZA

[@laborges4535]

Ótimo carrinho para levantar e transportar cargas. Um desses iria bem na minha oficina, quando eu montá-la. Abraços!

[@fawabros]

Thank you!

[@tbokarya1152]

Op pp klllllpo99oo7. Iiiiii

[@AMER1100]

Wow Very nice Thank for shearing

[@fawabros]

You are welcome!

[@ronheydon117]

Great video. Really appreciate it when you speed up the repetitive work. Great idea and I'll bet you will wear it out from using it so much.

[@fawabros]

Many thanks for your advise!

[@sergeykolesnikov2334]

скок епли чтоб жб столбик погрузить. я бы уже его давно сам унес в одиночку )))

[@ivangonzalez8093]

Buena idea y bonito trabajo gracias por enceñarlos estos bonitos trabajos e ideas gracias 🇨🇱👍👍👍👍

[@fawabros]

You are welcome!

[@EdisonJotzdaCosta]

Obriga Fawa Bros, idéia genial e excelente demonstração. Mas, por favor, me diga que aparelho de solda você utilizou?

[@josecolmenares567]

nice work well done. thanks

[@fawabros]

you are welcome!

[@keithboyer3210]

Two suggestions, add counterweight to the opposite side from the crane and add a u shared pieces in front of the main roller to keep the cable from jumping off. Otherwise an awesome build

[@fawabros]

Many thanks for your suggestions!

[@jojoredota5397]

@@fawabros go u do ucuu FYI u UGC cut ouch uu cup uu CT

[@jojoredota5397]

@@fawabros uuu TX ucu

[@jojoredota5397]

@@fawabros Cu UGC uuu cuff you vhf uucu go uucucuuc u up uuuu UGC UFO ucuu FYI uucc uucc u UGC

[@ertonmneves8277]

Congratulações ❤😊🎉 Brasil 💚 💛

[@ipwee]

Great build. I would suggest you change the direction of the cable clamps on your winch cable. "never saddle a dead horse" Edit: That said, the way they were installed will certainly hold the amount of weight your rig can lift. It's just good practice in general.

[@fawabros]

Many thanks for your suggestions!

[@mikeznel6048]

Never saddle a dead horse. Your the 3rd person I've heard say that in all my life. Milwright? That's how I was taught by my uncle when I was young.

[@ipwee]

@@mikeznel6048 Hi Mike, It's a great saying, isn't it? I just got my 40-year pin as a Union Ironworker.

[@cristianvillalonga3564]

Hola "Genio". Excelente tu creación, y sobre todo para los que hacemos movimientos de cosas y nos tenemos que arreglar solos. Saludos de 🇦🇷. 👏👏👏👌👌👍😉

[@fawabros]

Muchas gracias por tu cumplido!

[@tarunhalder8708]

ü

[@jozefceynowa9709]

Jhhnf

[@phule7134]

super technique

[@fawabros]

Thanks!

[@robervalleonciodossantos4837]

Meu amigo está de parabéns falo de São Paulo Brasil

[@fawabros]

Thank you so much! I love Brasil too.

[@scottwilliams6257]

This was a nice introduction video for making just about everything. The possibilities become endless when you have the acquired skills used in this video. I see it for more than it's worth👍 when I'm just getting into cutting, drilling, grinding, welding and painting.

[@fawabros]

Many thanks for your supporting!

[@Chevelle_addict]

Awesome build. I'd have put a loop around the cable at the end of the crane

[@fawabros]

Nice done!

[@benniedonald]

I need one of these that I could pull behind my electric wheelchair. LOL 😆

[@fawabros]

:)

[@ziarulrevansa719]

SUPER COOL!

[@fawabros]

Thank you!

[@ИгорьИванов-ь2к]

Два человека вручную всё поднимут и отвезут!

[@fawabros]

It will better when you working for long time.

[@rodneyb7918]

Measurements would be great

[@vyacheslav0481]

Классный манипулятор получился.🔥🔥🔥🔥🔥

[@fawabros]

I don't understnad your opinions!

[@toastyovens8777]

the woo wow song is driving me insane

[@fawabros]

Sorry!

[@sheilamclaughlin963]

Nice, a few little changes would make it great

[@fawabros]

Thank you!

[@yeagerxp]

Excellent 👍👍👍. Thanks for sharing

[@fawabros]

You are welcome!

[@themanofquality3582]

Yes me thanks you mate👋🇮🇩from indonesia

[@xuanhainguyen5468]

tôi học được ở anh rất nhiều,cảm ơn Anh

[@fawabros]

Thanks!

[@ericlakota6512]

Pritty neat i could see it come handy

[@fawabros]

Yes, sure! Thank you so much!

[@aamalmokhtalifa3511]

very good job .. up to you

[@fawabros]

Thank you so much!

[@keroncongxmusik334]

MANTAP 👍👍👍

[@fawabros]

Thank you!

[@samsien9105]

Great job 2 T up , can you put wheel char motor to run by battery ? and brace bar support leg not to collab when you lift heavy stuff ,

[@shazzorama]

Love this build. Very satisfying to watch it being created. Wondering if there could be an issue with the wagon tipping up onto 2 side wheels?

[@fawabros]

Thank you!

[@g.r.4853]

Of course, look at 27:20 and see him hold the crane side down with a foot on the brace. Next "improvement" would be outriggers.

[@jamessmith7691]

What kind of welder is that. Doing a good job for a small one. Good show.

[@fawabros]

Thank you. I use TIG welder. You should refer this one: bit.ly/3uha3Tl

[@colcanicolai3542]

@@fawabros р-н

[@xuanhainguyen5468]

tài nghệ của anh thật là tuyệt vời

[@rosineiatesch7664]

Jejksudjsydh e você pode ser uma boa

[@SerralheriaDicas]

Gostei, Muito bom esse pequeno guincho!

[@fawabros]

Thank bro!

[@bachirbelmiloud1890]

78à1

[@behroozfarzi977]

Very gooooooood I laik your project.

[@fawabros]

Thank you so much!

[@jcs220]

Muito bom! Inscrito aqui no Brasil... Very good!

[@princedhyani2370]

Very good

[@fawabros]

Thanks!

[@isakintani2863]

If possible, give the size and details so that the audience can implement it

[@dionemp4849]

Good job.

[@fawabros]

Thanks!

[@hipdaizii]

Now! That is awesome

[@munsters2]

Pretty neat invention.

[@fawabros]

Thank you so much!

[@joshuanicholsjr5327]

that was great if you know what to do with it god bless

[@fawabros]

Thanks!

[@frediefarmer]

Pretty slick.. 👍🏽👍🏽

[@fawabros]

Thank you!

[@mrkofficial8258]

It's nice video... 👍🏻👍🏻 Success for you Brother 🙏🏻🙏🏻🙏🏻

[@fawabros]

Thank you so much!

[@stephenkofi2542]

Very great one, i wish you could show us one that is powered with an engine and a driver's seat

[@rafaelbarcenas7187]

No

[@fawabros]

Many thanks for your suggestions!

[@sulistriana5268]

a

[@johnwhauserman]

Very cool.

[@fawabros]

Thanks!

[@revpops]

Awesome work 👍, I wish I could be that inventive.

[@fawabros]

You can do better than me. Come on!

[@joxongiryovbossrov456]

Very good.Mr.Good....

[@fawabros]

Thank you!

[@MukeshKumar-jw6ji]

Very useful video.👍

[@fawabros]

Thank you!

[@Ricopolico]

Nice, but a cheap hand truck would work as well.

[@fawabros]

Many thanks for your compliment!

[@johnwallace9002]

Cable clamps on backwards, never saddle a dead horse. Nice project

[@fawabros]

Thank you!

[@diy4u167]

wow good

[@fawabros]

Thanks!

[@luizhenriqueserigrafia6838]

Você é um Gênio!!!

[@fawabros]

Thank you!

[@TheOldaz1]

Nice job, it would be good to have a better turning circle.

[@fawabros]

Many thanks for your opinions!

[@josiasmoreno7407]

Well,,,,,,,, saludos desde el salvador c a

[@fawabros]

Welcome!

[@kenancay6132]

Awsome , thank you

[@fawabros]

Thank you!

[@narpatbhainapsa899]

🙏🏿 good 👍

[@fawabros]

Thank you!

[@vinceianni4026]

Good job my friend well done

[@fawabros]

Thank you so much!

[@albertoespinosa1839]

0

[@azpycich]

с таким же успехом можно создать станок для чесания уха ))) эти 2 орла с лёгкостью могли не то, что погрузить ...донести эту балку до места или залить её в опалубку по месту.

[@gurgenarzumanyants4388]

@@alexgamp5364 А что вы хотели ? Слова "крутящий момент" не переводятся на местное наречие :)

[@general5104]

SAFETY EDITING NEEDED !!! Cute idea. Thanks for posting. One thing I saw thats very dangerous, and NEEDS very much to change, and it's NOT on your apparatus...its the procedure you're using. Anybody in industry will tell you, NEVER to capture your cable with your hook! Every edge that your cable bends around, puts side pressure on the strands and, over time, they will fray. This does several things. The cable isnt as strong as it was before, plus, now you have another safety problem tgat razor sharp points are sticking up to tear your flesh when you, or someone else inadvertently puts their hand there and ends up having to have stitches. It's a VERY BAD HABIT ! One that must be changed. Get some straps or ropes and learn how to use them and keep them WITH the lift table. Hook your crane TO THAT. Never wrap a crane cable around anything! I'M NOT TROLLING ! I worked for over three decades with cranes and cabling and I saw folks do this bad habit and set up an accident for someone else! Please stop! This video is instructing folks that DON'T know any better, a really BAD habit ! Please edit the part out where you thread the crane cable thru a piece of equipment and capture the cable with your hook, before somebody accepts that practice and hurts folks!!!

[@sddiymakeitworthit7512]

Super awesome 👏

[@fawabros]

Thank you, my friend!

[@usece]

الله غربله على هالفضاوه

[@fawabros]

Thank you!

[@dineshkannan1274]

Super brother 💪 I make in try.please square pipe inches

[@jean-marcfournier4904]

Génial !

[@fawabros]

Thank you!

[@larrysullivan6536]

Looks amazing love this

[@fawabros]

Thank you so much!

[@ABC1900.]

De fajin lett.

[@schneider1492]

now can we add an electric drive, and an electric wince, and an actuator for extension?

[@erineudopaixao135]

Da para tira motor de carro para manutenção! Ótima ideia

[@fawabros]

Yes, thank you!

[@Isuzu212]

Excellente

[@fawabros]

Thanks!

[@hsjawanda]

Superb!! 👏🏼👏🏼👏🏼👏🏼

[@fawabros]

Thank you so much!

[@schneider1492]

if you take a pipe with an inner diameter the same as the jack, and cut it in half and magnetize it, you can make stops for the jack at pre set heights.

[@fawabros]

Many thanks for your suggestions!

[@msda-musicassemdireitosaut8552]

Quem gosta de conteúdo bom da um like no video dele pois foi muito legal!

[@fawabros]

Thank you so much!

[@crazedgoldminner7384]

That was a way to build I just built a little ATV cart for my thing but I tried to use as much scrap as possible I didn't have to buy the hubs and tires so but using mostly bed frames from habitat store the angle iron it's not the strongest but you can weld it into channel and all kinds of stuff

[@aaronalon9222]

Great job! Guys kzbin.info/www/bejne/mn-qYYVsmLR9b9E

[@fawabros]

Nice idea!

[@gerardbaticle9885]

super travail quel est le diametre du tube pour les roulements de direction merci

[@fawabros]

Thank you!

[@nareshkumarverma1359]

Very good...

[@fawabros]

Thanks!