R56 MINI Cooper Oil Pan Reseal DIY (2007-2013 MINI R56, N14 Engine, N12 Engine)

  Рет қаралды 3,789

FCP Euro

FCP Euro

Күн бұрын

Пікірлер: 14
@jayparnes
@jayparnes Ай бұрын
I just did this job yesterday. For me it wasn’t necessary to remove the exhaust. Undoing the clamp and hangers, then removing the cross brace allowed the pipe to drop enough to remove and install the pan.
@johnelons1446
@johnelons1446 4 ай бұрын
Hidalgo is the best.
@tm5346
@tm5346 Ай бұрын
Oh man! Big job ! I will hold my breath I don't ever have to change my oil pan ugg thanks for the video!!!
@tracysadler7008
@tracysadler7008 4 ай бұрын
Thanks Mike and FCP. Will take care of my slight leak next week.
@splendidcolors
@splendidcolors 4 ай бұрын
Permatex makes a foam gasket remover that does a good job on the VW/Audi gasket sealant.
@splendidcolors
@splendidcolors 4 ай бұрын
Thanks for posting this. I'm about to replace the oil pan on my 1999 Audi A6 C5, which has leaked both times I replaced it after it got a nail in it in a parking lot. (I'm jealous to see an oil pan that isn't the lowest ground clearance point!) The last time I replaced it (for a crack), it was okay. The early C5 A6 and Passat had both RTV and a metal gasket on engine code AHA. Starting in 2001 (or late 2000?) they switched to just the sealant on the ATQ engine that uses the same oil pan. Is there an actual change in the engine or did they just figure out that model year that metal gaskets are unnecessary?
@tm5346
@tm5346 Ай бұрын
Winter coming should people change their weight of oil on mini bc I when I switched I switched fromCastro liquid M 10/40 even though I never used it 1040 until now
@cariea
@cariea 4 ай бұрын
Can you put up a link for the CTA Tool you used to undo the exhaust hangers?
@charlesb.3116
@charlesb.3116 3 ай бұрын
I heard that not all the bolts are the same length and you have to make sure to put each back in the same location that you removed it. Any truth to that?
@fcpeuro
@fcpeuro 3 ай бұрын
Hi Charles, all the bolts on this N14 were the same size. For any job that has a bunch of hardware like this, you can always make a template out of cardboard, and set the bolts in it as you take them out to stay organized.
@minimanadam
@minimanadam 3 ай бұрын
WRONG !!!! USE A GASKET LIKE OEM REQUIRES..stop shade treeing shit
@Indykeebler
@Indykeebler 3 ай бұрын
It’s actually a service bulletin through mini to use RTV instead of the gasket.
@tm5346
@tm5346 Ай бұрын
Wrong? Ugg
Twin Telepathy Challenge!
00:23
Stokes Twins
Рет қаралды 123 МЛН
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 10 МЛН
Does Pre-FILLING The Oil FILTER Cause Engine DAMAGE?
14:03
The Motor Oil Geek
Рет қаралды 3,2 МЛН
Only 5 Steps to Replacing Your MINI Cooper's Crank Seal - Watch to Find Out!
18:37
Mini Cooper Oil Leak Repairs (R56/N14)
17:59
EricTheCarGuy
Рет қаралды 387 М.
R50 MINI COOPER: HENRY HAS AN OIL CHANGE
23:14
Beards and Bangers
Рет қаралды 416
FIXING MINI COOPER S R56 ENGINE AND COOLANT LEAK
20:45
Dimi Goldberg
Рет қаралды 6 М.
Mini N14 Timing Chain Replacement
25:58
EricTheCarGuy
Рет қаралды 485 М.
Top 5 Problems Mini Cooper Hatchback 2007-2013 2nd Generation
4:51
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 660 М.
Twin Telepathy Challenge!
00:23
Stokes Twins
Рет қаралды 123 МЛН