FDM vs SLA 3D printed bolts and nuts (PLA vs Resin)

[@spencerhalle75]

This is actually an incredibly professional and scientific approach, I'm very impressed. I did not expect such a high quality experiment.

[@MrVellial]

Yep. It's really very professional to compare the hardness along the layers for sla and across the layers for fdm😂

[@hartfordboothe7466]

You have done a very nice job of comparing the two materials with quantitative analysis. I'm impressed. I love your hoist setup to test tensile strength. Then you did a very nice job of gathering all the information into the spreadsheet for quick comparison of the data. You put a lot of time and effort into making the setup for the tests. I make and post videos under another account (which is why you won't find any videos associated with this account) and nothing I do is nearly as good as what you've done here. Thank you for the time and effort to make and post this video. I am considering purchasing a 3D printer and this information was very helpful to me in trying to choose between FDM and resin printing.

[@BobWidlefish]

I believe the most common SLA resins are just for show, not strength, though I do believe you can get resins that are stronger. Some commercial resins are hard like a really dense and smooth concrete. :) If you end up experimenting with stronger resins it would be cool to see PLA+ or other strong versions. I love your tests, keep up the great work!

[@hj2479]

@@RajinderYadav I use high strength resins on my personal Formlabs form 3 3d printer to get high-quality prototypes. I think you can use good resins without a commercial 3d printer to get very strong parts. I also use all kinds of commercial elastic resins for unique parts.

[@hj2479]

@@RajinderYadav I use an automated wash and cure system to make the process easier and faster. The price of Formlabs official resins is also quite absurd so I modified one of their empty cartridges with a small part from Protoart and now I can use that cartridge with any third-party material and refill it whenever I run out. I usually like to buy from ApplyLabWork whose materials are half the price of Formlabs resin.

[@jedimario22]

You should try the dental resins the are made to stand up to chewing for years. They are also cured for 20 min at 66C.

[@madebydimiakagreekmachine5822]

Oh is this true cus I was thinking of getting a resin printer but I’ve been seeing how weak they are and I need them to a be abit strong should I still gets resin , input would be much appreciated!

[@kwyj]

The water washable resins are very brittle, especially compared to the stronger types. The only other type I've used is Siraya's ABS-like resin and it's much tougher, i'm considering trying it for functional parts. There are tons of resin formulas, for conductivity, strength, flexibility and other material properties. I've also read many posts where people have mixed resins to a achieve a blend of material properties.

[@195cn7]

Very interesting test.I simply could not imagine PLA screws having this strength.

[@nikolaivillitz6026]

Thank you for doing these tests. I remember about a year ago your other video on PDM strength bolts/nuts really helped me too.

[@MyTechFun]

thanks, and there will be more, I am going deeper into different material testings..

[@toadiri]

very nice testing, good engineering, this is how a real reviewing and testing should be done. respect!

[@TheRealStructurer]

I have been a bit jealous of the nice details of the resin printers, but as most of my projects are functional and not only esthetic I’m happy I choose a FDM one. Thanks for sharing 👍🏻

[@MyTechFun]

Check details of 0.2mm nozzle in this video, very similar to SLA (the 50% benchy part in video starting from 19:39)

[@alfredonovoa8124]

You could try "tough resins" and it would be interesting to see the performance of enhanced PLAs like PLA 870.

[@mikhaelchernogorsky556]

someting like formlabs tough syriya blu/clear v2

[@noway8233]

And then compare the cost , $$...

[@ChristopherKemsley]

@@mikhaelchernogorsky556 The tough resin won't work better for this - it'll likely be worse. It's tougher against impact at the expense of tensile strength and dimensional stability under load. Ironically, the standard resin has among the highest tensile strength.

[@lauranceberiya1314]

@@ChristopherKemsley so if I want to print some mount or joint that will carry a weight on it it is better to use strong PLA materials like nylon rather than tough resin?

[@ericmac564]

@@ChristopherKemsley Interesting. Theres a video of these withstanding 90 ft lbs on a torque wrench.

[@biffbayberry8070]

Thank you, Sir! I was surprised by the results. Good job!

[@MyTechFun]

Thank you, and don't forget to check second and third round too kzbin.info/www/bejne/baOUZ2CLedRlqpY

[@delta1inc654]

Resins are great for modeling but not for practical use like FDM printers. That was what I found in my research before purchasing my 3D printer. Thank you for this, as this helps many of us know the limitations of PLA prints without spending the time on the research. Keep up the great work/videos!

[@MyTechFun]

I got Siraya Blu resin for testing, it should be much stronger.. there will be round 2 for this video soon ;-)

[@qzorn4440]

how wonderful.. a great backyard test with real equations and instrumentation values... this makes choosing the plastic much more logical... thanks a lot...:)

[@dubi01]

this is the first video of yours that I have watched, and I want to say that I loved it. Thank you so much for the information - it was very useful. I will be subscribing to your channel

[@Enforcer_WJDE]

Very interesting results. I would have never thought that resin was so brittle.

[@MyTechFun]

Not every resin. But this budget resin, yes. (there are other similar tests, with different results, mostly with Siraya resins)

[@eggshellboygaming6311]

Also keep in mind that resin also has layer lines what weaken it so those should have been printed in same format as pla bolts however I still think resign is going to be weaker by far it’s just to brittle needs to be abs like resin or a tough resin.

[@eguy34]

I solved the elephants food on my resin printer (Anycubic) by lowering the exposure of the first layer. All resins are different so you'll need to figure this out by trial and error. And for the tight nut threads, I adjusted the tolerances on Chitubox by trial and error. My nuts and bolts fit perfectly straight out of the print and also fit their matching metal fasteners no problem. I just print them standing up with no supports too. Hope that helps anyone.

[@corvonegro5]

Man i liked too much your way to deliver real engineering and practical usage of learning. I've also laught a lot at the end with the octagon winner! hahahaha Definitely a good channel to follow up! Best regards from brazil!

[@3dgussner958]

I had to replace a kitchen sink screw few years ago with a printed one. The PLA one hold up the job for few weeks until boiling water was drained. Next one I printed in ABS and 3 years later it is still going strong, no leak no problem with boiling water being drained. BTW I had to print this bolt nut combination as the sink was old and no spare parts were available.

[@Thatguy-jh2ex]

Is it resin or fdm?

[@3dgussner958]

@@Thatguy-jh2ex fdm print

[@Thatguy-jh2ex]

@@3dgussner958 do you prefer fdm or resin? And which printer would be stronger? For printing car interior parts...? And it has to be in high detail aswell

[@3dgussner958]

@@Thatguy-jh2ex I don't have a resin printer and can't say if there's any resin that withstand the heat in a car. Also these have often small build volumes, so depending on the object you want to print. Abs and asa aren't easy to print but holding up the high temperatures.

[@MarcelFuzii]

Great video! It was exactly what I was looking for.

[@timmturner]

I've been enjoying your content and forgot to subscribe, I've rectified this now. Keep up the great work, you have provided a lot of valuable information.

[@VGreggUndercover]

Love your videos, very in depth

[@dromeosaur1031]

Thanks for your tests! The info is really helpful to eyeball the plastic details strength.

[@MartinBLopez]

Great job of stress testing and backing up evidences with spreadsheets. Also the used of video evidence is helpful. Sounds like fdm augmented with other materials can exceed the current capabilities of resin. Now if resin or sla can be augmented that would provide additional capability that is not currently available. Thanks again.

[@MyTechFun]

There is a 2nd match too: kzbin.info/www/bejne/baOUZ2CLedRlqpY

[@slevinshafel9395]

nice job. Perfect comparation. This was what i was loking for.

[@MyTechFun]

Thx. There are two more similar tests with stronger resin vs petg and vs abs

[@michal_king478]

love it. Ive seen many tests of all those special tough resins but its hard to find tests of just plain normal resin

[@dwightligori]

Thank you for this... It gives me a clear idea when to use what material

[@MyTechFun]

Check my other two videos filament vs resin. Very interesting and different results there

[@rontenvelden8566]

Interesting comparison. well done

[@northsider8995]

Absolutely fantastic and informative video. Just subscribed!

[@MyTechFun]

There is a 2nd match too: Siraya vs PETG. kzbin.info/www/bejne/baOUZ2CLedRlqpY

[@jbbw667]

WOW - thanks. I like tests like this and it's great that you have a summary page. I look forward to seeing the future tests you do. I subscribed to your channel. I am surprised they have elephant foot. A service that prints things should know that you print these things off the build plate and use supports. They should have been printed at an angle too. You really need to retest with a better resin print. I hope you have time to do that. (Assuming you already haven't.)

[@jbmiller717]

I use Siraya Tech resins and get great results with strength. I mix my own resins with combos of Tenacious and Elegoo, Sculpt, Build, and a few others. Strength can be obtained with SLA, it just takes some playing around. And orientation DOES matter, you still have layers. Great video though, thanks!

[@army103]

That certainly defied my expectations; not having much experience with either, I assumed the resin would have been much stronger.

[@MyTechFun]

These were budget materials. There is a 2nd match (Siraya vs PETG) kzbin.info/www/bejne/baOUZ2CLedRlqpY

[@naelrc4583]

Thanks for sharing this fun competition video my friend! Really enjoy watching & really helps us to choose better material. Great work on every test result. Liked & subbed! Hope to see more of your work😁👍🏼👍🏼👍🏼

[@MyTechFun]

Thank you. Here is another similar video: kzbin.info/www/bejne/baOUZ2CLedRlqpY

[@naelrc4583]

@@MyTechFun Welcome & keep come your great work my friend. We try to leard how to make our own rc part. Please do come by to our channel too. We do video about rc cars😁👍🏼

[@9243672946729]

Can you please print the bold in resin also 45° 90° version and test this. I think that the 90° version will be very strong.

[@MyTechFun]

I already tested SLA printing position, not significant difference. kzbin.info/www/bejne/e2i7dYCwfMdojas

[@juzzlookin]

Tests are resonably sound for typical uses, but materials are questionable. Another couple of parameters are required. But gives us some idea. Thank you for sharing.

[@andrewlawrence6581]

Nice video. Was really wondering this myself. I like your new test setup, though i miss seeing you dangle from the PLA bolts.

[@MyTechFun]

Thanks, belive it or not, I am missing that dangle too, it was more fun to me :-)

[@Nikcodra]

Me acabo de terminar de ver varios de tus videos, me encantan las pruebas que hacer. Sigue asi!(I just finished watching several of your videos, I love the tests to do. Keep it up!)

[@Archin-dn4bp]

I'm wondering if it is possible to print sealed structures from flexible resin?

[@MyTechFun]

I don't have experience with flexible resin so far.

[@mikeylama]

Nagyon jó teszt volt, kezdem megbánni, hogy SLA nyomtatót vettem mérnöki felhasználásra...

[@MyTechFun]

Nemsokára lesz round 2, kaptam tech resin-t tesztelésre. Siyara Blu. És itt nem beszéltem a hőállóságról

[@mikeylama]

Ha tudsz időt szakìtani rà, az igen jò volna, èn elsősorban prototìpus fröccsöntőformakat nyomtatnèk, de a standard gyanta nem alkalmas rà, fdm technològia pedig vègkèpp

[@VexingVelvet]

This is amazing! Thanks for posting this!

[@ceving865]

Great testing!

[@Kris-qn4bn]

Thank you for the detailed tests!

[@tribecca710]

Thank you for the tests !

[@postalcollective7111]

Wow!!!! And I was thinking to go Resin printer, but not for what I make as they need to be tough. thankyou very much

[@MyTechFun]

Take a look of the second part, Siraya Blu vs PETG. Also Tenacious resin test is in progress..

[@EnglishPete]

Print orientation matters on SLA too, it would have never popped of the head if it was printed through the lenght

[@jochemajendouz9271]

Came here to see if anyone mentioned this, and if someone mentioned tough resins. Tech community didn't disappoint.

[@MyTechFun]

SLA orientation has been already tested kzbin.info/www/bejne/e2i7dYCwfMdojas Tough resin too (BLU) and tenacious test is in progress. kzbin.info/www/bejne/baOUZ2CLedRlqpY

[@HaTaKeSeMpAi]

excellent video, thanks for sharing those tests.

[@3dfreedom316]

I wonder how it would differ if the sla bolts were printed horizontally

[@MyTechFun]

Not big difference kzbin.info/www/bejne/e2i7dYCwfMdojas

[@technikfreek5155]

Could you maybe test the high end resin from formlabs with your sla printer? Formlabs says that their resin is strong enough like Pa6. You can also use the resin with elegoo or anycubic dlp printer because both printer are still working with 405nm light wave.

[@MopH3ad]

would be nice to see tough resin tests not standard resin we know this is very brittle already bu tthank you all the same for the time and effort my good sir.

[@MyTechFun]

Other resin will be tested too. Siraya Blu for example.

[@TheMehmetTosun]

One of the best videos on youtube

[@subspace666]

i had no idea small pla bolts would be so tuff i was surprised.

[@MedallionSteven]

Im not sure how much it differance it would make but the SLA print have a other print direction. By that i mean FDM ist printed horizontal while the SLA is printed vertical. When you print FDM vertical it would only hold 1/2 of that what you showed. How much stronger SLA would be if it would be printed horizontal i dont know.

[@MyTechFun]

I already tested that, for SLA there is no big difference in printing orientation (maybe 20% until with FDM the difference is 3-4x)

[@jimberg98]

What resin? There isn't just one. There's FormLabs Tough 2000 and Tough 1500. There's Siraya Blu and Tenacious. Were the resin bolts cured at 60 degrees C?

[@MyTechFun]

It's in description: Elegoo water washable p. resin. These were budget materials. But there is a 2nd match, siraya vs PETG. kzbin.info/www/bejne/baOUZ2CLedRlqpY And third match is in progress (Tenacious vs ABS)

[@jimberg98]

@@MyTechFun Sorry I missed that. Great stuff.

[@frankbauerful]

What I expected. I've used epoxy resin a lot and while it is awesome when combined with glass or carbon fibres, on its own it's very weak.

[@williampeck428]

well epoxy and printer resin are kinda not the same thing. i was thinking of dipping my prints into epoxy for strength and that crystal clear protective layer but not sure if it helps

[@donpon9993]

Perfect test, thank you

[@JeffArtz]

I'd be interested to see the results for Siraya Tech "Tough" and "ABS-Like" resins.

[@JeffArtz]

Oh! I saw your video on Siraya Blu vs PETG - so you already did it! Cool! Thanks!!!

[@davitberishvili8062]

Thank you very much for this tests.

[@MyTechFun]

You are welcome! And there are several videos on this topic: www.mytechfun.com/videos/fdm_vs_sla

[@davitberishvili8062]

Thank you. These videos are usefull for me.

[@truedwell]

I love your videos, i learn a lot

[@FunOfTheSun1587]

Great job, thank you from Siberia!

[@ajflorido]

where can we found those tools you're using in min 2:33 and 3:38? Thanks for your great videos

[@MyTechFun]

Thx. Search for thread die and tap tool on amazon, ebay etc.. I bought mine in local store. Very common tools in metal industry and not expensive.

[@ajflorido]

@@MyTechFun Thanks!

[@hoverbotfpv1425]

I have seen actual fibre core strand carbon, kevlar or fibreglass filament. I can't see how it would stop and start though without a cutter at head to allow breaks. Impressive tests! pla is tougher than thought. I just got me a Anycube X as treat for lockdown cabin fever. LOL!

[@AthanCondax]

Amazing video! I love the comparison and the method. A lot of great tips here too.

[@bitsmart...]

what about to test pc (polycarbonate) filament would it be any better results though?

[@MyTechFun]

Step-by-step, I am preparing some ASA, ABS tests, then Nylon.. And then moving to PC..

[@bitsmart...]

@@MyTechFun keep up great work!

[@mihamavretic5202]

Exactly what I was looking for!! Thank you very much!

[@MyTechFun]

Soon I will compare a stronger resin too (Siraya Blu).

[@fuzzyelectrons]

Great video, thank you for sharing!

[@KuyaShane]

thank you. now i know what i need.

[@benemorth]

Great video, good job comparing them.

[@christophbrockmann6339]

nice consistent setup. Please print the resin screws and nuts horizontally next time so that the layers are stable like with PLA. thank you.

[@NGEvangeliman]

Did they pint this all long vertically? I assume horizontal print would be much stronger

[@darkfire2703]

Nice video and great testing but as you also hinted to at the end there is a big problem with the comparability here. On the one side is PLA and while there are also many types here, that is a specific material. On the other side you just have a generic resin that is not intended to be used in physically demanding tasks. Of course there is a point here, that the cheapest material for FDM (pla) is much stronger than cheap resin but that is just the way it is. Resin printers exist in the first place because of the great quality and accuracy. If you want high performance in SLA you need to get specialized resin, just as you would get specialized filament for FDM if you wanted to get the best possible quality prints.

[@MyTechFun]

Yes, this is just test about regular PLA and Resin. I ordered these resin bolts, and of course, company created it using most popular (probably economic) material.

[@sssssssssssssssssssssssssssBUM]

nice comment and video 👍

[@HeroCP7]

i think the reason why pla is stronger than resin is because of the way the material was made. PLA is extruded in a mesh like pattern while resin is made whole. If we look at it as rope vs a single thread "WITH THE SAME THICKNESS" emphasis on same thickness, the rope would win because of the gaps and twining. the gaps and twining of the rope does a better job of dispersing force like a sponge, whereas a whole material doesn't. Another example is how folded iron is stronger than molded iron. this is due to the grain structure hold it together.

[@sirayatech2]

We see lots of our users recommending our Blu and Tenacious resins. We are happy to supply if you are interested to test it out. I believe it would give PLA and PETG a serious run for their money

[@MyTechFun]

I got your email. I'll reply soon

[@hjw5774]

Thank you - this was very informative!

[@Digitalfiendscom]

Nice tests and not surprising. What I got from this video is that if I need a bolt with good tensile and shear strength, I should use a metal one. 😂😝

[@kellyklaask7su990]

Very interesting test. Thanks for sharing!

[@solo8827]

i think the orientation of how you print it will also affect the strength. i thing horizontal printing is stronger than vertical printing..

[@MyTechFun]

Yes, I already tested SLA printing orientation, less than 20% difference (with this material). For fdm this difference is 4x or more.

[@pureeviljb]

excellent presentation simple logical and very intuitive.

[@pumpkinfury]

amazing testing! Thanks

[@justafan395]

Wouldn’t it make sense to also print the resin bolts sideways? I feel the test is a bit inaccurate due to this

[@MyTechFun]

I already tested printing orientation for SLA printing, difference is not big. (There is a video too)

[@calseynez]

It would be interesting to see if they undergo compression test, and metal cutting to go against shear, bending, compression, and friction.

[@fbwa6452]

Why SLA bolts have been printer in vertical position and PLA horizontal? Should be the same for tests :) But anyway thanks a lot for this :) Ah didn't watch to the end :) Let's see with prints the same position.

[@zapl80]

Should do the same, there are several fairly scientific tests out there that show little to no effect of print orientation. And PLA is a really really strong plasticy material if you don't require that it bends (i.e. tensile strength) which is what it mostly tested here while standard resins just can't deal with that because they shatter.

[@funx24X7]

​@@zapl80 No effect of print orientation? This video would seem to disagree: kzbin.info/www/bejne/kJq0lp5mrMqcZ8k Vertical prints are much weaker since the print lines run perpendicular to the direction of force.

[@zapl80]

@@funx24X7 Oops I meant for resin prints only.

[@l3d-3dmaker58]

SLA prints are near anisotropic, the have the same strength in the Z axis

[@kevfquinn]

I expect printing a bolt horizontally on an SLA printer will be be quite difficult. Resin will tend to "pool" in the threads on the side nearest the build plate, leaving the threads filled on one side. Since the resin is so much more brittle, I expect trying to cut the threads with the die will just break the bolt. It will be interesting to see it tried...

[@animewarrior7]

thanks for this very informative video sir.

[@robertlackey7212]

Excellent video ! two thumbs up ! I have one request , can you include the weight of the fasteners and show the relative strength to weight ratios .

[@MyTechFun]

Resin M6x20 is 0.992 g and PLA bolt is 1.015 g

[@robertlackey7212]

@@MyTechFun Thank you

[@isaackay5887]

Formlabs has a Form2 printer that I've printed from for over 2 years. I prefer and recommend anyone that wants to get into SLA printing to invest in this specific printer first. No it isn't their newest one (the Form3), and yes it is more expensive than other ones. But compared to something cheaper (and a pain in the butt IMHO) like the Anycubic Photon, *_it is a pleasure to work with,_* and I can literally print the exact same things the Form3 can - it's just a tad bit slower is all. I've only ever had 1 minor issue printing with it in 2 years and that was when I was printing PEEP Valves for University of Texas Dallas during lockdown in April/May 2020 (didn't affect my prints - I was just printing 24/7 and the machine needed a break after job 25 haha). *TL;DR* If you got yourself a Form2, you'll bee able to print with their commercial-grade resins (requires~92-99% IPA wash), like their biocompatible *_Surgical Guide_* resin and tough engineering resin - heck even their clear resin is strong as long as you print at 50-100µm!! *Honestly, I think you'd do this experiment justice if you decided to run this experiment again using a higher quality printer like the Form2 and the right kind of resin (especially their Surgical Guide!)

[@gonzalodiez1775]

I'm about to buy a formlab printer. Can I get in contact with you to ask you a few questions. I would really apreciate the input.

[@Exstaz]

Would be nice if you tested “tough resin”. There is also a optimal printing tempts for sla. I believe it to be 30c at least.

[@collegestudent6071]

As others have pointed out, water washable resin is actually pretty weak compared to standard resin and only really used for models. You can also get tough, engineering, and abs like resins which are much more durable.

[@MyTechFun]

There are parts 2 and 3 for this video with stronger resins (vs ABS, PETG). List of those videos: www.mytechfun.com/videos/fdm_vs_sla

[@vin10954]

What's the weight of those nuts/bolts?

[@sjcronchi]

great work!!!

[@JSunBurns]

I would like to see tough resin like Siraya blu resin compared to PETG.

[@MyTechFun]

Me to. I got resin samples from Siraya, 1-2 weeks and this comparison will be done.

[@Friariah]

I'm curious about SLA resin bolts out of a proper strong resin and printed horizontally, the layers going through the whole bolt should change the result. Also, water wash resins seem to be the most brittle of the bunch. Anycubic Tough Resin Ultra may be a good resin to try. I now see this is an old video, time to go watch the other tests.

[@yimin82]

the resin bolt printed in vertical or horizontal position?

[@MyTechFun]

Resin in vertical, but I tested, here orientation doesn't affect much the strength as with FDM. kzbin.info/www/bejne/e2i7dYCwfMdojas

[@jakesells2379]

You can avoid the elephant foot by adding a chamfer to the model in the effected areas.

[@jakesells2379]

@Thu Nell Ⓥ the easiest way I've found is using a slightly undersized raft the same height as the total base layers.

[@56Seeker]

Very interesting, thanks for that. I'd like to have seen the steel components tested as well for perspective. I'd never have considered it before, but 3D printing might be a suitable source for obscure thread patterns in non critical applications.

[@MyTechFun]

Good idea, now I am curious too. Only I have to make my testing equipment stronger than those metallic bolts..

[@micheltremblay4774]

​@@MyTechFun A (grade 5) 1/4" bolt has 2700 lb/f (Coarse thread) and 3100 lb/f (Fine thread) proof load. One just need to check the specs of those bolts, it is usualy specified. From The Engineering ToolBox site. Proof Load - is the maximum tensile force that can be applied to a bolt that will not result in plastic deformation.

[@TFlorian]

Interesting test ! On resin, you have different kind of resin ("ABS like" resin exist and have a better resistance) I'll going to see your orientation resistance test !! Thank you !

[@MyTechFun]

I already tested Siraya Blu and Tenacious test is in progress.

[@Martin-xb2rz]

I want to use sla for metal casting

[@ChrisDeger]

abs like resin are pretty tough from what I understand I have never used it myself, but I believe that if there is no flex like in water-washable resin it becomes incredibly fragile, so one would assume like a good sword finding a mix between flexibility and toughness would be key for strength.

[@MyTechFun]

I already tested Siraya blu vs PETG bolts. And also Tenacious test is in progress.

[@ChrisDeger]

@@MyTechFun cool I'll check it out

[@مراد-ش8ط]

great vid. thanks and keep it up.

[@MyTechFun]

There are several versions of this video (better materials)

[@مراد-ش8ط]

@@MyTechFun That's amezing, thanks

[@pureeviljb]

id love to see pla vs pla+ and various manufactures

[@MyTechFun]

Something like this? kzbin.info/www/bejne/q3W7mHhtpNhjhsk or this kzbin.info/www/bejne/q6m2op-mf9CMbq8 ?

[@bauken5315]

Standard SLA resin is not meant for that kind of structural stability, though there are ways to improve the durability of these kinds of parts such as stronger resins, longer cure times and printing it at a 45 degree angle.

[@MyTechFun]

Yes, I agree. But this is test between "budget" resin and budged FDM material. This is what you get, if you order SLA printed object. But good news is that more materials are on the way for similar testing.. (like Siraya Blu for example)

[@johnnemo4146]

Were the PLAs printed vertically?

[@MyTechFun]

No, horizontally

[@elucky51]

Very interesting video. Thank you

[@l3d-3dmaker58]

Pla is brittle, but it still has one of the highest tensile strengths of "non engineering" materials, I believe PC is the "PLA" of high temp stuff, Polycarbonate is suuper strong, you should try it if you can

[@Sleepery22]

Yes, (Carbon Fiber) Polycarbonate is my very favorite 'high temp' (engineering) material. Or it 'was'.. until I upgraded my printer to print real 'high temp' materials (300+C), like Ultem or PEEK! ;)