Mini LED moving head wash review. 7 x 10W RGBW CREE LED

[@tomwassum568]

How about a video of programing this with Dmx

[@victorvanbernard3040]

The "dis" setting inverts the display so it can be read upside down (like when they're mounted like yours)

[@cmtrilleven14yearsago65]

Yes

[@thezprod]

i have the same lights and they are definitely good for the price! Nice Video :)

[@juanoacq]

Me too!

[@mindmazebeats3568]

Are these those lixada lights?

[@rohan_carr]

The 'dis' is the display, which you can turn upside down to make it easier to see when you are using them upside down!

[@fearntree]

TheRCSChannel That could have come in handy! Thanks haha :)

[@aToDoRItmo111]

Hola alguien sabe si se los Podra usar Colgados Boca abajo o Vertical horizontal de cualquier Manera igual ?? 🤔🤔

[@kooloneism]

Do they work by plug and play ?

[@davidhurst1595]

Spot on, I got a pair not Long after asking you about these on a previous vid ( in which you highly recommended them ) would agree with you about the strobe but with a dmx controller this is not a problem they are great fixtures at great price will be getting another pair soon enough keep up the good work looking forward to your next vlog

[@josh512x]

David Hurst Are they still holding up?

[@davidhurst1595]

Josh Curnes still working well but need to be on dmx

[@josh512x]

David Hurst Thanks!

[@onesixtyofficial]

Do you still own them and do they work after 8 years?

[@davidhurst1595]

@@onesixtyofficial working well when I sold them 3 years ago

[@olehantzschel7517]

How do you enable the auto sound mode without a DMX? Is it even possible? 👀

[@cmdell4693]

I'm new to this but, do you need a DMX controller to get more than 2 of them to work together, or can you put 4 on a master/slave auto mode type thing?

[@fearntree]

You can put them on master slave to copy each other. Then using the reverse pan and tilt on the unit you can mirror them to create automatic light shows.

[@tahinanicolasravoavy6003]

Can it be used with the app Light Right? I so, with with manifacture profile? Thx

[@BayAreaEventDesigns]

Thank you for the video great review always enjoy the background music

[@stephaneche4649]

Hello, I might like to buy 2 almost the same on the internet, I only do very few parties and in not very big rooms, and I think the quality is sufficient for me. I don't have a DMX console and I would like to use them automatically or synchronized to the music, do you think I can connect them with a DMX cable but without a control console and program them as master/slave?... Thank you

[@yan5362]

you prefer this or mini spider?

[@DJGeorgeDXM]

I've just bought a pair of them for my livestream. I'm not using a DMX controller yet, I don't know what setting should I use. What would you recommend to a 100% beginner? In other words, I don't know what the heck I'm doing!!! 😂

[@dpdrummer89]

Your video was pretty damn informative and helped me decide that I want to buy them. Quick question though. I plan on using these at shows with a dmx controller. do you have to re-program these every time you turn them on at every show? or do they stay with its previous setting before turning it off?

[@fearntree]

They stay on the last setting that they were on when turned off. I use them with DMX so they keep the address stored when turned off :)

[@MaybeNotToad]

Hi there for the power on the unit can you plug it in to a standard plug on a wall?

[@raberacing4958]

i dont know if you know now already but dis means display so you can put the display upside down

[@bradwilkinson6974]

Are these the Lixada lights? If so, they're currently on tomtop for £38 each.

[@tazzbrills1704]

How many meter far can it go?

[@fearntree]

Depends on the brightness of the room. I have 4 of these and two are bright enough to reach a wall 20m away

[@FireBullFireworks]

Hai! My LED’s are turned off, but the moving head does rotate, in what part of the menu can you turn the LED’s back on?

[@fearntree]

Hi, I'm not sure what's happened here! If you have it on DMX mode then you might have set the LED channels off. If not I'm not aware of a menu mode for blackout.

[@akeemadams2669]

Any link to the bar that u mounted the lights to

[@skidder652003]

are these the £55 jobbies? amazing value for money

[@fearntree]

steve marks these were about 120 but still amazing value for money. They're incredibly bright!

[@jay-rhyskemble3646]

Great review and were did u get them from ?

[@Busbybeats]

Great video! Have you found anyway to keep the lights in one colour only and not change to all the others? Sometimes it would be good to just stay on one colour, I can't figure out how to do this if it is possible with these lights.

[@stevehayes648]

do you have a video on how to set up the mini quad light with dmx controller?

[@fearntree]

Hi Steve, Unfortunately every lighting controller is different and there are loads of variations of this light so they are not all the same. Your best bet is to look for videos of you controller and have a good read of the lights manual to learn what each channel does.

[@Thomash7808]

I just got the fixture and it stories much more than yours do in auto mode and sound active, is there anyway to make them act as yours did? The sound active mode is the same pattern as display mode fast also

[@6torp3]

How did these perform did they stand the test of time seeing as this video was done 2015 please

[@forgeneralcrap1057]

Hi. Is it possible to use Dmx and alter sound activated patterns to reduce or eliminate the strobe? Driving me mad. The for the upload

[@graygoza8075]

That's cool. Like the lights. Where did you get these and do you think these units are available in the States.

[@kevinchand8359]

What's the other lighting you had going with them towards the end? They looked rectangular.

[@fearntree]

The lights on the rig along with the was lights are the equinox ultra led 25W scanners

[@kevinchand8359]

@@fearntree Yes, that's it, SCANNERS! Thanks!

[@tommydanger60]

Having trouble finding ATA or soft bags to transport 4 lights, any leads?

[@east2w]

How do you set the pan tilt so they don't shine "back" into mine (the djs) eyes when they are at the front of the booth? Cheers

[@julesastie6394]

would really like an answer to this. have tried but no joy

[@hard2handle5000]

Can you disable the strobe?

[@fearntree]

Not using just the unit. You need to program it.

[@djdnewworld]

Can I get link on where I can get lights from?

[@YH-lf3um]

Hello! I just got this light and everything with the settings is fine, but the motor shut off completely when it's turned upside down. Did you experience this before hanging yours? Should I just plan on keeping it upright?

[@goduss_776]

I have the same lights, but they're max speed is about 60% of yours... Is there way to configure that?

[@fearntree]

If their speed is different in auto mode then I'd imagine your lights will be slightly different. There is no way of controlling the speed unless you're programming them with a controller

[@goduss_776]

Ok! Thanks for answer.

[@n3qxc]

If it hasn't been mentioned in the comments below already... the setting of dis in the menu is for inverting the display... so that you can read it in the upside down position.. just an FYI

[@fearntree]

I think someone has mentioned this before, but thanks anyway! :)

[@WRESTLINGMANIACSONLY]

What dmx controller can I use to control 4 of them

[@danvamberger3434]

Not sure if you can answer this but if you could it would be greatly appreciated. I am currently trying to program a pair of these and I cannot program them separately as in what I do to one the other will do as well. Direction, color, and so on are the same. Now I am new to dmx programing so it could just be my inexperience that has caused this result but I am curious if they can be program individually or if they will always mimic each other?

[@fearntree]

Hi Dan, it sounds like you have both lights set to the same DMX address. I believe from memory these lights are 18 channel so therefore they take up 18 channels of control, one for each setting such as colour etc. This means they need to be set up 18 channels apart, such as your first light set to 001 and your second to 019. It's hard to explain over comments but if you watch some KZbin videos on DMX hopefully you'll get there. Good luck! :)

[@danvamberger3434]

fearntree thanks. k i know how to assign dmx channels. i think i may have just forgotten to assign the second light. i haven had to much time to play around with them yet but atleast now i know its an error on my part.

Hello friend, where I can get that structure to place the lights? Regards!

[@ayosodsn5585]

how do you get them to start lighting up

[@KineticScreen]

Have you tried rigging these lights sideways? Do these inexpensive units still work in this configuration? Or can the pan motor only cope with being mounted 'up or down' ?

[@fearntree]

They would work but not for very long. Moving heads can't handle the forces so the motors would burn out

[@biglotty123]

Great vid mate likin them deffo getting a set

[@jailhousemartin5438]

Hello, do you know where from I can get a library profile for Martin LightJockey?

[@cmdell4693]

another question is there no PC software that is a better alternative to DMX or is that the best way to do it?

[@RockPDX]

QLC+ is awesome! www.qlcplus.org/

[@tast-toe]

hey i have buyed 3 off them for my foodtruck.... they already installed and now i try to make some programming with a AVL miniscan 12 controller. How do you go the moving heads so fast.... I've i touch the pan our tilt fader ... they move slow (soft). I make a wave program and i've i set the speed and wait fader on fast... the moving heads make short movements like it's to fast to do the program.... i've a put down the wait and speed butten... they do the programmed wave but slow not fast.... i hope you can have me some advice grtz

[@fearntree]

Hi Kevin. All of these generic units are slightly different and it sound like the programs on yours might be different to mine, as mine have an inbuilt fast setting. All I can recommend is researching DMX programming and trying to learn the ropes :)

[@coastercountdown6923]

With a basic DMX controller (obey 10) can you control rotation speed

[@DjGiovasz]

thanks for the video, i have a question, what is the configuration that you use in dmx? bless

[@fearntree]

+Giovanni Reyes Hi I' not too sure what you mean. All of the lights are on the same channel when I use them. I then invert the pan and tilt on two of the units to get a symmetrical setup.

[@mario1053sv]

As it is called the things that have them bolted so that it does not fall from where you have them located.

[@tast-toe]

hey can you give me the type of threaded bolts where is de black schackle is mounted on the fixture... I want to buy two of these, but i need to hang the fixture's directly on a sealing. No extra schackles or G hook's can be used. I'm from Belguim and we have type for threaded bolts they called M and a number. I hope you can help me. Thx

[@fearntree]

Hi Kevin, thanks for your comment. Not too sure which bolt you are meaning! The bottom of the fixture needs an omega bracket which has some pre-drilled holes. You'd then need to drill into the ceiling and bolt these securely in place. The number on the threaded M bolts I believe is just its diameter in MM, I hope this has helped :)

[@tast-toe]

fearntree hey thx for the reaction... yes i want to now the diameter of the bolts you use to mount the omega bracket on the fixture. ...

[@stephaneche4649]

Bonjour, je voudrais peut-etre en acheter 2 quasiment les mêmes sur internet, je ne fais que très peu de soirées et dans des salles pas très grandes, et je pense que la qualité est suffisante pour moi. Je n'ai pas de console DMX et je voudrais les utiliser en automatique ou synchronisées sur la musique, pensez vous que je peux les relier avec un cable DMX mais sans console de pilotage et les programmer en maitre/esclave ?... Merci

[@hawkskyflier]

Hey Fearntree, found your youtube on these lightes. i just picked up 4 of these. I'm pretty much a lazy DJ... ie, I run all my lights on Sound Activate. Question, I'm using a Chauvet on/off board for 8 lights. When I turn on the lights they work awesome.. issue is, when I turn them off for a different song and such, when I turn them back on they have to go through the 'initialization' test again. Is there a way to bypass this. Sometimes this is 20 - 25 seconds into a song before the lights actually turn on and move. Do you know if there is a way to bypass this function and just make it turn on.. again, without a DMX controller. Thanks for the great video, just reinforced why i bought these lights... thanks, Jerry

[@fearntree]

Hi Jerry, thanks for the comment :) Unfortunately I don't think there is any way to bypass the initialization. Due to these lights having so many motors and components every time it turns on it needs to reset so that it can process where it is and it knows what its doing. The only real way around it even with DMX would be using a black out programme which basically just dims the light but doesn't power it off. So I'm afraid the short answer is no unfortunately you can't bypass it. - James

[@Foojaleeckalikeelamaka]

hawkskyflier You should be able to leave up the power channel for them (channel 1 I think?) and just turn down the colour channels. That way they'll remain powered and not need to reboot everytime you need them.

[@ravegmp]

can you make them tilt more up on sound active

[@fearntree]

They tilt the fully, I think they were going fast as the speaker was close to the lights microphone so they were going bit fast :)

[@djkadakamc1889]

Hi, do you know if it's possible to set a specific position of axis x-y using dmx?

[@fearntree]

Dj Kad aka MC I'm not too sure. I'm assuming every channel will correspond to an angle but it probably depends more on what you're controlling it with

[@scottspragg6203]

Hi, what make and model are these please? Do you have an amazon or eBay link at all?

[@fearntree]

Hi these are just generic moving head wash lights. I don't have a link as the listing expired ages ago. Sorry!

[@djosvani]

Is there a difference between yours and the 12 watt version?

[@fearntree]

I'm not sure which 12w version you're talking about. most led moving heads with a rating of 12w are usually spot fixtures. these are wash fixtures which are much brighter

[@TheVedran0705]

Hi. Which dmx program do you use for work with those mini washers ? I have Martin Light Jockey and i can't find the options to control them ! Greatings from Croatia

[@chaz58]

if you mean you cannot find them in the library, its because of either two things, first,m your fixture library requires an update or because Martin are so high end they just don't put un-branded cheap Chinese moving heads on the software.

[@fearntree]

Martin Light Jockey library will only have Martin or high end fixtures in their library. I use a small handheld DMX controller. You might be able to create a custom fixture using the manual that came with the lighting. I can't really help much more! :)

[@WRESTLINGMANIACSONLY]

What dmx controller are you using

[@fearntree]

It's a small handheld unit called gwdmx which you save programmes onto via a computer. Theyre pretty hard to come by but I'm sure you could find one if you looked hard enough :)

[@andyburr]

Any standard 192-channel dmx controller will work. I prefer the ones with 16 sliders (rather than 8) if you want to control lights with more than 8 channels.

[@jakenewlove1985]

Hi great review I have been looking at a pair of these and are these the cheap ones that are on eBay or amazon

[@geko7844]

+JakeN www.amazon.co.uk/dp/B01A5F8EDY/ref=twister_B01A5ESTJ4?_encoding=UTF8&psc=1

[@224chingon]

Those are not the same on the link. Its supposed to have only 7 LED's

[@danquay9504]

Thanks for sharing this video, great tutorial and I found it easy to understand what you on about the DMX .. I plan to Get DMX moving heads Even though I have 4 cans pars but move unless you position them..just quick question, where did you buy your truss?

[@fran.theman007]

What scanners is that?

[@drbobdc8319]

You may have said, but...can you adjust the “intensity” to make them less bright?? Thanks, very helpful vid. :)

[@fearntree]

You can't change the intensity on the unit itself only via a dmx controller :)

[@djkingin111]

i have 3 mini led moving head and colour is not changing only blue light is ON

[@djkingin111]

My mini led moving head is not working properly. It only blink blue colour

[@fearntree]

I'm afraid without looking at the manual or knowing what fixture you have I cant really do anything. If its faulty send it back

[@xkI1LeRmInEcRaFtx]

Nice review!

[@andygipson721]

Dis flips the display upside down

[@sam333lewis]

Where would we be able to buy them?

[@wcjc99]

they are on tomtop app $49.00 flash sell right now . I bought 4 of them. free shipping shipped in a week

[@kaybhee6]

good,,, why upside down...

[@viperlighting5174]

it looks the bollocks mate love it

[@SimonMS8200]

Is the lights still working?

[@fearntree]

Simon Møller Svenningsen still working as of last night!

[@SimonMS8200]

fearntree where did you buy them? I can see another person suggesting amazone. but are they the same as yours? (: (written with google translate)

[@JankovicsNorbert]

witch light stand do you use? thanks!

[@fearntree]

I use the Gorilla light 3M truss system with wind up stands. I bought it from a company in the UK called whybuynew.co.uk :)

[@MalikArnett]

dis is to rotate the screen upside down or back to right side up

[@fearntree]

Malik Arnett Thanks for your comment, a few others have already mentioned this :)

[@radiocurry7583]

How to program on a dmx

[@legendfpv]

Genuine Cree?

[@fearntree]

I can't honestly say as I've never taken the boards apart. What I can say is they're still working fine and are out pretty much every Friday and Saturday night.

[@gingaduten4883]

Now, several years later I ask you: Have you had any problems with them at all, and if that is the case, how long until it started to malfunction and what was the problem?

[@fearntree]

Hi, great comment. I bought 4 of these around 4 years ago. They all work perfectly apart from one which has unfortunately lost its red LEDs. I think this is a problem with cheaper LED chipsets as some cheap par cans I bought also had broken LEDs but in the space of a few months. I took the broken moving head to pieces to see if it was a lose connection and honestly I was very impressed with the build quality. I've just got home from a gig tonight with 2 in my setup and they are as bright as the day I bought them. Well worth the money in my opinion :)

[@gingaduten4883]

Thank you for such a quick answer! Then these will be great as washers/fillers for my schools stage light installation where they won't be moved around as much 😆

[@yerumo]

Where can i purchase these?

[@fearntree]

@@yerumo I got mine from eBay UK

[@yerumo]

@@fearntree do you have a link i have 6 of this model that i bought from walmart durham, n.c. but they don't sell it anymore.

[@LioSintra]

Anyone know a store in Europe selling this? For what price?

[@gueritomix1]

Where u buy?

[@geko7844]

+Adolfo Lopez www.amazon.co.uk/dp/B01A5F8EDY/ref=twister_B01A5ESTJ4?_encoding=UTF8&psc=1

[@viperlighting5174]

nice little fixture me like loool iv made my own

[@gueritomix1]

thx very much my friend

[@rajib.das.9842]

Nice.led

[@Millennial_Mike]

You'd think you could turn the strobe off...

[@fearntree]

It's the only negative for me.

[@Millennial_Mike]

@@fearntree I've ordered 2 from Ebay. Mainly for bigger gigs (I'm a solo guitar/singer... high energy. Want something to help get folks in the mood. Wonder if you can disable it somehow without DMX?

[@DJ.Decibellz]

I on the other hand would infact like to turn the strobe effect ON without a DMX controller... 😠

[@augustoorjuelapublicidad8584]

Cómo configurar para AUDIO Rítmicas

[@leticiahernandez8925]

Coooooool

[@wilcandou]

Where do they state that they are "Cree LEDS? If they're Chinese, I can tell you right now... they're not!

[@quintinli5940]

Cree leds,produced in Taiwan,China.seem like you do not believe it's cree leds

[@carver7585]

Yeah they are CREE, and you're an idiot.

[@wilcandou]

The genuine "MINI LED" moving lights have the Cree LEDS ...AND the fans are also a hell of a lot quieter than those copies you have. Just because they're bright does not mean that they are CREE LED's! ...AND if you are that dumb to think that China doesn't make other equivalents to the CREE's ...Sucker!

[@carver7585]

You prove my point over and again. You literally know nothing about LEDs LOL. CREE LEDs are made in China. How stupid can you be?

[@quintinli5940]

what you wanna say?

[@djjacob1]

Why you have sooo big pupils 😂

[@yustinacatur5307]

Like

[@jay-rhyskemble3646]

Great review and were did u get them from ?

[@jay-rhyskemble3646]

Great review and were did u get them from ?

[@geko7844]

+Jay-Rhys kemble Not sure if this is where he got them, but you can get similar ones here: www.amazon.co.uk/dp/B01A5F8EDY/ref=twister_B01A5ESTJ4?_encoding=UTF8&psc=1