fence stain sprayer: the best way to stain a fence on a budget

Using a pesticide sprayer has to be the best way to stain a fence for 2 simple reasons: a fence stain sprayer (or pump pesticide sprayer) not only minimizes cost, but also provides an efficient way of staining the fence. The fence stain sprayer we used can be found on Amazon. Just click on the link below...
amzn.to/3egyRTL
The best way to stain a fence with a pump sprayer is to find one that is less expensive than a typical paint or stain sprayer. They typically have adjustable nozzles and can imitate the action of a more expensive sprayer specifically made for paint or stain.
Other items in the video:
staining brush : amzn.to/3gIUFZE
Ready Seal Stain (pecan)
www.amazon.com/gp/product/B00...
Also, if you are in the market for any tools, check out our Amazon store front.
Visit our amazon store front for our recommendations for tools and supplies for DIY success!
www.amazon.com/shop/housebarons
If you click on the amazon links and buy, you are helping us out as a channel. We are Amazon
affiliates and can earn from qualifying purchases and no extra cost for you. Thanks for the help in supporting our channel and enabling us to keep us making videos!There are 7 basic steps for How to stain a fence:
1) Shake / stir the stain well making sure all settled pigment is mixed.
2) Pull up pour spout on can
3) Fill sprayer to 4 liters
4) Pump handle on sprayer to build pressure to spray
5) Adjust sprayer nozzle pattern
6) Spray stain on one section of fence
7) " Back Brush " to even out the stain
Our fence wood is cedar. Cedar is some of the best wood for an exterior fence. The application of fence stain helps preserve the wood and enhance the wood color and grain.
This is the final video in our fence build project. In previous videos we sank the posts in concrete, hung the boards horizontally, and built a fence gate.
THANKS FOR WATCHING!
Also, if you are in the market for any tools, check out our Amazon store front or the links below.
Visit our amazon store front for our recommendations for tools and supplies for DIY success!
www.amazon.com/shop/housebarons
If you click on any of the listed amazon links there or in this description and buy, we thank you for helping us out as a channel. We are Amazon affiliates and can earn from qualifying purchases and no extra cost for you. Thanks for the help in supporting our channel and enabling us to keep us making videos!
Here is a list of some other tools we often use :
RENOVATION TOOLS - TIME & EFFORT SAVERS
DEWALT 20V MAX* Cordless Impact Driver Kit, Brushless, 1/4-inch (DCF787C2)
amzn.to/3GAb94M
DEWALT Line Laser, Self-Leveling, Cross Line, Red Beam (DW088K)
amzn.to/3IUtCIB
DEWALT 20V MAX* XR Oscillating Tool Kit, 3-Speed (DCS356C1)
amzn.to/3NyVDsH
DEWALT Oscillating Tool Blade, Titanium, Flush Cut (DWA4213)
amzn.to/3JUwjLC
IRWIN Level, I-Beam, 72-Inch (1801096) , Blue
amzn.to/3qMOHym
POWER TOOLS: NICE!
DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp (DWS713)
amzn.to/36Hay3x
DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)
amzn.to/3w78NWy
DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)
amzn.to/3WdhFUX
TOOL BOX - MUST HAVES:
Amazon Basics Soft Grip Retractable Utility Knife with 3 Blades
amzn.to/3uD6A3T
The Original Duck Tape Brand 394475 Duct Tape, 1-Pack 1.88 Inch x 60 Yard Silver
amzn.to/36YXWo6
Or
Gorilla All Weather Outdoor Waterproof Duct Tape, UV and Temperature Resistant, 1.88" x 25 yd,
Black, (Pack of 1)
amzn.to/3kmyKhS
IRWIN Hammer, Fiberglass, General Purpose, Claw, 16 oz. (1954889)
amzn.to/3uABWIm
DEWALT 20V Max Cordless Drill / Driver Kit, Compact, 1/2-Inch (DCD771C2), Yellow
amzn.to/3ZBoT8c
IRWIN VISE-GRIP Pliers Set, 4-Piece (2078707)
amzn.to/3GHpYmf
IRWIN Screwdriver, 9-Piece Bits
amzn.to/3GKRxLH
Stanley Hand Tools 33-725 1-1/4" X 25' FatMax Tape Measure
amzn.to/3kgGJ02
KAIWEETS Digital Multimeter TRMS 6000 Counts Voltmeter Auto-Ranging Fast Accurately
Measures Voltage Current Amp Resistance Diodes Continuity Duty-Cycle Capacitance
Temperature for Automotive
amzn.to/3CSgpQj
NEXT LEVEL TOOL we wont do without!
DEWALT Line Laser, Self-Leveling, Cross Line, Red Beam (DW088K)
amzn.to/3IUtCIB
MECHANIC MUST HAVES :
DEWALT Mechanics Tools Kit and Socket Set, 142-Piece, 1/4 & 3/8" Drive, MM/SAE
(DWMT73802)
amzn.to/3ZD1UJV
#stainfence, #stainingfence For more content be sure and check us out at housebarons.com/

[@martinhogan5970]

Cringing with that razor blade!!! Thanks for the vid; very helpful!!

[@avalero13]

Oh brother! I made the mistake of buying one of those pump sprayers. The fan pattern was horrendous, the coverage was horrendous, the overspray was horrendous, the product waste was horrendous for semi transparent stain, with the 2 gallons of semi transparent that I wasted I could have bought an electric sprayer that atomizers the transparent paint better! I liked your video for the algorithm, I’m just leaving my comment here for other people to see. Whatever you do, for the love Of God, do not get this handheld pump paint sprayer! With the amount of product your waste, you will be able to purchase a high volume low pressure HVLP, or something much better to spray with! Oh my gosh I am still traumatized by this horrendous experience I went through this afternoon.

[@Housebarons]

Hey AValero, Thx for the input. You make a great argument! Thx for watching.

[@thelog86]

You have to adjust the nozzel to your liking

[@busterbeagle2167]

Buck wild with that box cutter

[@Goodtimes77]

Hahaha, I was thinking the same thing, all yanking on shit....

[@areyouarobotz]

Living on the edge

[@coryglasgow]

I watched this a couple nights ago, gearing up for my first stain. Popped up again on KZbin so went at it again just to see what I might have missed. Saw your comment and thought, "wonder why he says that?" .......Then DAMN! He attacked that pour spout like he hated fingers." He's kind of hiding his left arm during the video....maybe he got one? Oops nevermind...he just pointed with it."

[@Zionist_Eternal]

I used to do stuff like that. But, in a very similar act, the object let go, driving the point of the utility knife into a bone. One of the most painful, slowest healing, wounds I've ever experienced. Retracted blade--always when not immediately in use.

[@gotdat1873]

Well done. Definitely helped

[@jakenotfromstatefarm8042]

I appreciate the quick tutorial.

[@Housebarons]

Hey Jake, Glad it was helpful! Thx for watching!

[@wnhulsey3]

Great help!!!! Thanks.

[@davidweatherall1486]

Thank you. Great advice

[@Housebarons]

Hey David.., Thanks much and thx for watching!

[@linmann9667]

You are so awesome sharing on spraying the fence on a budget.

[@Housebarons]

Hey Lin, Thank you and Thx for watching!

[@yummyp485]

great idea iv been thinking of doing this and saw your video! super helpful!

[@Housebarons]

Hey Yummy, Glad you liked it! Thx for watching.

[@OTFSCat]

Very helpful, thank you.

[@Housebarons]

Hey Brian, Glad to hear that. Thx for watching!

[@budwhite9781]

Thank you. Very helpful. Cheers.

[@Housebarons]

HeyvBud, Thx for watching!

[@thelog86]

I recommend a pump zero. It is a battery powered pump sprayer. No more manual pumping, constant 20psi no fluctuation of pressure at all

[@TheSouthernSkunk]

Have you tried staining using it? just curious how many more people have used a pump sprayer for stain.

[@tq986]

OMG! Wish I saw this last summer....!

[@Housebarons]

Hey T Q, Ah well . Thx for watching!

[@garyhirtz4392]

Thanks for the video

[@Housebarons]

Hey Gary, Thx for watching

[@paulbryant68]

good vid buddy! thx

[@Housebarons]

Hey Buddey, Thx for watching!

[@MikeesTexas]

For all the folks commenting on “why is mine clogging up my sprayer tip?” Note: The person in this video is using the product “Ready Seal” this product is much thinner than other products out there. Many other products out there easily clog sprayer tips.

[@Housebarons]

Hey Mike, Thx for the input.

[@mercedesbenzs600bash]

Excellent...

[@Housebarons]

Hey Mercedes…, Thank you and thx for watching again!

[@ForemanJF1]

Great summary, doing this soon but with Li-ion battery Scott's cart sprayer, too much pumping need more time for that spray+brush work. Thanks!

[@Housebarons]

Hey Positive…, Thx for watching!

[@thelog86]

Thats what i use, constant 20psi no pumping saves time and equal application rate start to finish. PUMP ZERO

[@just_observing8248]

How many gallons did you use? Looks great!

[@Drundel]

My garden sprayer (tried two) didn't spray anything close to that. Mine was a GD mess. I thinking of thinning it and trying it again.

[@Housebarons]

Hey Drundel, I guess all sprayers ( or stain) aren’t created equal. Thx for watching!

[@shyraisutherland4036]

Great video! Are you able to clean out the sprayer thoroughly and use it for gardening purposes afterwards?

[@Housebarons]

Hey Shyrai, No! I keep that sprayer only for staining. Since staining is done every year or so, it will get good use. Thx for watching.

[@RayW0791]

Cutie 🙂

[@arg6193]

Let the store shake the paint in a machine - much easier!

[@jmar4082]

Used a Wagner power paint roller on the outside of the fence and a Wagner HVLP sprayer on the inside due to the metal posts and stringers. The only issue was the power roller wouldn't cut off pressure due to the thin stain being pressed thru it. I fixed that issue with a cheap remote controlled power outlet to cut power on and off as I went along. Roller was tube fed and sprayer held about a quart. Enough to cover about 10 feet. This method does a great job of complete coverage between your pickets.

[@Housebarons]

Hey J., Thx for the tip! Thx for watching!

[@Juva_o]

Awesome video. Did you have to use some kind of paint thinner to clean out ur pump sprayer? I plan to do mine same way but might take 2 days or so

[@Housebarons]

Hey Juan, If the if stain is water based , then water is fine to rinse out the sprayer. I would check stain manufacturer directions to be sure. Thx for watching!

[@rickmaples2510]

Anyone else get anxiety with that box cutter handling? Oh man...

[@Dom-pf8wd]

Thanks for the video!...Any problems with the sprayer getting clogged?

[@Housebarons]

Hey user.., No problem but I had to keep the stain solids from settling. Keep shaking it. I’ve heard from other viewers they had issues. Something to be aware of at least. Thx for watching!

[@kcjz56]

Can you use oil base or waterborne stains in the sprayer that would be helpful

[@Housebarons]

Hey KC Hmmm. Probably depends how many “solids are mixed in for color. Seems doable. Thx for watching!

[@Jesussaves869]

Is November a good timing to stain a fence? I was planning to stain my fence this weekend. How long does it to for an oil solid stain to dry during this time of season?

[@Housebarons]

Hey Let’s.... I’d guess temperature would be the deciding factor and that can vary widely in the USA. Probably should look at the temp range - should be listed on the can or online product specs. 50 degrees F is a common dividing line. I’d have no problem waiting till spring to stain as I’m in my yard way more in spring than winter. But that just personal preference. Hope your project goes well - thx for watching and commenting!!

[@Jesussaves869]

@@Housebarons thanks for getting back to me, I truly appreciate it.

[@Sammyc53]

@@Jesussaves869 This product, ReadySeal, can be applied it ANY temp, since it's oil based. Just make sure the wood is really dry (around 12%. You can get a wood moisture meter for about $15). WATER based stains probably need to be applied around 50F.

[@mwngw]

That sprayer looked like it was spitting a bit. I have a wider angle sprayer tip that'll do my job.

[@lowprofile2412]

I’ve done this before for an outdoor shower. Just plan on throwing out the sprayer when done. But hey only $17.00 at Home Depot

[@Housebarons]

Hey Low, Nice! thx for watching !

[@troyealy6584]

How new of fence required? I have fence that was installed about 1.5 months ago. Anything I need to do to prep it for the stain?

[@flanadu]

You're fine if it's new. If it's more than a year old I'd pressure wash it first then let it sit a couple of days to dry out then stain it.

[@genewhaley7614]

I bought a sprayer like this that said it was for stain. I am using a valspar semi-transparent stain and it coming out thick and splotchy. Do you have to add water to thin out the paint?

[@Housebarons]

Hey Gene, I guess you could try that. Semi transparent is thicker by design -closer to paint. Might need a larger nozzle. Thx for watching.

[@borisharhaji6870]

Good stuff! Ive got a 4 rail fence which I'm getting ready to stain, but I'm more than willing yo pay for easiest "best" stainer, so any recommendtaion on an electric one (perhaps cordless) - whatever is to make the job easiest?

[@Housebarons]

We were considering budget 1st. I would look at various reviews and stars. Just make sure you mix the stain thoroughly because stain can have " solids " settle out at the bottom of the stain container. thx for watching!

[@rainacherienne1010]

I have the same question

[@naughtykitty3202]

How do you keep nozzle from blocking up with pigment?

[@Housebarons]

Hey Naughty..., All I can think of is that it did not get fully mixed / shaken enough. I would shake it , stir it, and shake it again. If that still doesn’t do it, car paint stores sell paper filters/ strainers which might help by straining it as you pour it into the sprayer. Also, the nozzle might adjust - turn it and see if it opens up the nozzle a bit. Thanks for watching,

[@RayW0791]

Naughty Kittie 🤔

[@davidstreling3690]

should have used old oil from the local gas stations(FREE) and then use a roller with a 5 foot handle

[@hildagladden254]

Great video. Thank you! Did you power wash the new fence before staining?

[@Housebarons]

Hey Hilda, No. It was a new fence install. But, It is a good idea to dye so if the fence has any real age to it. Thx for watching!

[@black10kevin]

what kind of wood did you use on your fence?

[@Housebarons]

Hey Kevin, The fence is 1x6 cedar with cedar tone treated posts. Thx for watching!

[@johnhermsen8218]

Be careful with that utility knife!

[@gamecocks1150]

Was looking for this comment. That is a fact.

[@waynechurchill7212]

Use the drill to stur

[@GoBlue4Ever-1]

How long did it take you to do those five sections time wise?

[@Housebarons]

Hey Don, To stain - it went pretty fast. With the sprayer and final brushing 60 min I’d guess. Thx for watching!

[@scotw3262]

I just tried this and it kept clogging up my sprayer tip. Can you use paint thinner?

[@Housebarons]

Hey Scot, Not sure. You may want to try the stain manufacturer to see what it would do to their product. Thx for watching.

[@erictomaszewski5165]

Did you have to add water to your stain. I tried a regular pump sprayer like you're using and it won't come out properly, it just dribbles out in a stream. I've pumped it like crazy, and have played with the spray setting, and it's all the same.

[@Housebarons]

Hey Eric, I did not add water. I did vigorously shake the stain. It probably depends on how many solids are in your stain ( which give stain its color. ) Maybe a different nozzle? Or last try - try to enlarge the holes a small bit to encourage flow? Thx for watching!

[@erictomaszewski5165]

@@Housebarons thanks, I will give all that a try.

[@bruceyung70]

Does it matter if it's water or oil based??

[@Housebarons]

Hey B, Oil clean-up is no fun. But if I had to guess, oil would hold up better. Thx for watching!

[@frederickchacon7208]

Is this oil based stain? Semi-transparent??

[@Housebarons]

Hey Fred, Semi-transparent. I had to keep it shaken to stop the solids from settling. Thx for watching!

[@smileyhappyradio]

Good to take box cutter out of hand before tugging.

[@Housebarons]

Hey smiley…., Thx for the comment and for watching!

[@billyhoyle5160]

How many gallons did you use for your fence in total? I just started in my fence and used 5 gallons about 1/4 the way through my fence. Think I am doing something wrong as my fence is 1200sq feet.

[@Housebarons]

Hey Billy, I think we used 6 gallons - about 1800 sq ft of wood surface.

[@rajeshb5773]

Will this paint fall on the neighbors home if house is near ?

[@Housebarons]

Could happen. Watch out for wind. Better to hang up some plastic to be safe!

[@bill373]

How much stain total did that job take?

[@Housebarons]

Hey Bill, We started with a 5 gallon bucket. Our pump sprayer wasn’t very efficient. So could of used less most likely. Thx for watching!

[@bill373]

Awesome.. very helpful, thanks for the reply

[@AmericanRenaissanceMan]

Heard it was better to stained seasoned wood instead of new

[@Housebarons]

Hey Kritical…, Yes. Typically it needs to be dry to accept the stain. If the stain won’t soak in the wood, it’s not yet dry. Thx for watching!

[@manuelsoria8398]

I’m not an expert but aren’t you supposed to stir not shake?

[@Housebarons]

Hey Manuel, I think you are right. I just took the fast way... and I’m not really worried about bubble formation on the wood. Thx for watching!

[@rodrickblanchard5825]

Are those pickets?

[@Housebarons]

Hey rodrick…, Those are 1x6 cedar. Here is all the detail : kzbin.info/www/bejne/jHytlqaZmZhngMU Thx for watching!

[@jamesturner9407]

Why is my stain coming out thick and not spraying like the way your is coming out

[@Housebarons]

Hey James, Might be a different stain? I know that the stain we used wanted to settle to the bottom of the bucket - so mixing was important. Thx for watching!

[@bruced9668]

Mine is coming out thick as heck

[@Housebarons]

Hey Bruce, We did it once a year later and some of the color settled to the bottom causing a clogging issue. Maybe call the stain manufacturer for tips??? Thx for watching!

[@dannyteebone9233]

Big fan of Jim Jordan! Love the work you do in congress and on fences!

[@bzobisch]

Jim Jordan the politician would just open his mouth and what comes out his mouth would stain it I'm sure, but then that smell...

[@earlmcginty5355]

Never said is this oil or water base stain!

[@Housebarons]

Hey Earl, Honestly don’t remember - but I think oil. Thx for watching!

[@franco2b145]

It’s a no for me. -Simon

[@lassei4659]

Good video ;) Thx Next time use a roll instead of the brush, especially if you have loads of fencing to do. And if you got a solid color (usually thicker consistency) dilute it with 15-30% water if waterbased or turpentine if oilbased. It tends to spray more evenly.

[@Zionist_Eternal]

As for this method of spraying? You kinda had my interest until the extensive back-brushing. No thanks.

[@Housebarons]

Hey the…, Fair enough! Thx for watching!

[@SteelBuckeye]

That spray pattern is not doing you any favors.

[@busterbeagle2167]

It’s not peCan it’s Pecan

[@tartansauce4879]

Do you say "pee-can" or "puh-con"?

[@goofsaddggkle7351]

In the south its peCan, soda is coke (“you want a coke? Ok what kind”?), and people aren’t grammar nazis - we share bbq and beer with anyone walking by

[@Jay2pay]

Double the. Work thumbs down