After explaining the pink nail polish thing, I gained a great deal of respect for you, really. I get it, I have a daughter too...
@fisheatingbagel404 ай бұрын
What a great review/overview! I just bought this same (but different brand) jig off Amazon, and as others have said, no documentation included so it was nice to get confirmation on the spacing, etc. Your production is top notch, editing is great, no annoying music and just the right cadence. P.S. the version I purchased off Amazon has corrected spelling on the front of the jig ("distance")
@fisheatingbagel404 ай бұрын
The bit needs to be cleaned before using. It's covered with a protective goo that prevents it from ejecting chips cleanly. That's why it started cutting better after using it for a bit.
@beyondutility4 ай бұрын
Thank you so much for the comments. You really made my day. It's easy for me to make this video and then only see all the things I'd like have done differently or things I could've made better. The experience you had was exactly why I made this video and I'm so glad it was useful for you. 🙌
@eyesalooking Жыл бұрын
Thank you very much for posting this review. I am new to euro style hinges, and I purchased the same hinge jig, and it didn't come with instructions. I only want to install some hinges on a tall cabinet I am building for my workshop and your instructions were the only ones that I found useful. I will be drilling outside so I won't have to make a mess inside my workshop and the shavings can fall where they may. I didn't notice your fingernails until you mentioned it but you were a good sport to let your daughter practice on you. Cheers.
@stuzman529 ай бұрын
I was reviewing this same thing and others like it with a different name. Some of the issues that I didn't like was where the arbor for the 35mm drill bit has to be held in by hand when drilling. They could have used two bolts to secure the arbor. The other two issues were with the slop in the arbor for the 35mm drill bit and for the small drill bit. And of course, a dust extraction would have been nice. The only thing that I liked about it was that it was made out of aluminum instead of plastic. Have a great evening!
@elioth.g.w29769 ай бұрын
I got one a few days ago and it locks by twisting in the housing ( 35mm bit only ) the other drill guide had some 32mm centres 37mm from the 6mm offset.
@stuzman529 ай бұрын
@@elioth.g.w2976 Great news to hear. It sounds like they updated the design by having the plate being able to lock in now. Thanks for the info.
@jonathanblackburn3449 Жыл бұрын
You win my subscribe for sporting the sparkly nail polish. Also a quality review.
@James-dv1df Жыл бұрын
Just bought one of these. Where you see struggling to hold the bit you can lock it in by turning the bit holder
@beyondutility Жыл бұрын
That's cool. Perhaps they've updated the design to include a locking function, that would be a useful addition. Unfortunately mine doesn't have it.
@mal7987 ай бұрын
Thanks for letting us know the forstner bit is non-standard shank. This is critical, and in my opinion, is a deal breaker.
@steven_vogt3 ай бұрын
I have also just purchased this jig and it arrived yesterday. Big Brother KZbin has clearly been alerted by my cookies and threw this review up in my feed LOL I thought your review was very clear, balanced and thorough. I have unpacked my jig although have not yet used it but can confirm that they have clearly updated it in the meantime as the drill holder twists and locks into the base - an improvement that I am sure you would have appreciated! :) Also, the Forstner bit seems to be covered in some sort of lacquer (presumably to prevent corrosion?) which may be responsible for an impression of bluntness for you? I intend to clean mine with thinners before first use so I am curious to see how mine cuts. Overall my first impressions of the jig are very positive - especially that I paid the equivalent of 31GBP for mine! Good design, robust and precise construction and they even included 2 little spanners to adjust the toggle clamp ;) Cheers from Poland! PS some other lazy YT reviewers have been cribbing from your review IMHO. They make some points that I only recall hearing in yours ;) I guess that makes you an influencer of influencers haha
@beyondutility3 ай бұрын
Thanks and good to know. Someone else mentioned the bit was covered in something. I don't remember noticing that but it's certainly possible.
@azza17938 ай бұрын
Pile of crap if the drill bit is sub standard and nearly impossible to replace
@PhillTheGreat Жыл бұрын
Dude! I was just going to say, "Can't trust a woodworker that paints his nails"... until the reasoning came. I have a little girl too so I understand.
@Edgunsuk4 ай бұрын
Currently on ebay with no brand name for £36
@Alex_P_19 Жыл бұрын
Purchased this jig and received a different version of the drilling guide for the hinge bit to that seen in this and other reviews. Instead of a pressed in bearing pressed in from the top, it had a bearing held in on the under side by a split ring, which on first use scored the drill bit (which was struggled badly and was not sharp at all). On examination the split ring was too big and protruded in to the opening of the bearing. The split ring moves and catches on the scores it made so it wasn't actually usable after that first test hole. Bang good customer service was a headache, offering only partial refunds and eventually replacement parts, but would not say if they would match the picture on the website. Best I could get from PayPal was a partial refund without shipping it back to China. Never using bang good again
@beyondutility Жыл бұрын
Sorry to hear that. I've also found their customer service lacking. Very disappointing to hear your product is not as pictured though.
@evanheffley1625 Жыл бұрын
You are burning because you are running that bit way too fast. A bit of that size should be run around 250rpm. That's about half trigger on low speed of most cordless drills. It looked like you were at max speed while drilling. The surface speed of the cutter is what matters, and the bigger the bit, the faster the surface speed for any given RPM.
@beyondutility Жыл бұрын
Good advice thank you. 👍
@mpirokajosephmgcokoca23556 ай бұрын
Dust extraction hole would have made the jig unaffordable 🙄
@Alex_P_19 Жыл бұрын
Hi, what's the punch you're using at the start of the video to mark the centre of the screw holes? Do you gave a link you could share? Thanks?
@beyondutility Жыл бұрын
Hi, it's the Starett 819 self centring punch - designed for hinges. I bought it on Amazon but currently unavailable though you can probably find it in other places. amzn.to/3jr8BhM
@Alex_P_19 Жыл бұрын
@@beyondutility thank you
@davidm2645 Жыл бұрын
I just purchased the same jig. The problem I am having is that the shank of the forstner bit is not "long" enough, in that I am not able to drill the 35mm hole deep enough. I have the locking collar up as far as it will go on the shank. I thought about buying a decent 35mm Famag Bormax bit but do they have a longer shank and will it fit into my jig?
@beyondutility Жыл бұрын
Strange that your bit is not long enough, does it look the same as mine in the video? Looks like the Famag Bormax does have a 12mm shank in 35mm and length from the end of the bit to the end of the shank is 57mm. www.famag.com/EN/Home/Products?pro=0bfed472-ab76-45f2-b7b6-ab9085d2644f Not sure if that's long enough though - would need to check
@davidm2645 Жыл бұрын
@@beyondutility yes, looks the same. I will look into the Famag Bormax bits and hopefully something will a good replacement.
@rotaxrider Жыл бұрын
@@davidm2645 Any update?
@fevermuzik41017 ай бұрын
In the beginning what's that tool you was using to punch the hole??
@beyondutility7 ай бұрын
Starrett 819 automatic centre punch. Looks like it's sold out, maybe discontinued: amzn.to/47NWa2I
@fevermuzik41016 ай бұрын
@@beyondutility thanks!!....now I know what it is pressure there more brand types and model to look for
@rotaxrider Жыл бұрын
What jig are you using on the cabinets?
@beyondutility Жыл бұрын
The Veiko Hinge Jig: www.banggood.com/custlink/vv3rpVTbVJ