Ferguson FE35 VINTAGE TRACTOR RESTORATION Part 8: Injection Pump & Fly Wheel Removal

[@aaronringland6251]

Come on get the next 1 up lol. I'm starting to rebuild mine and following along

[@kt3537]

Great video🤠

[@kevsvintagetractorrepair]

Glad you enjoyed it.

[@noelobrien7743]

I still think there a seting up tool that bolts to the pump mount flange and locates the master spline holding gears in correct place for assembly with the cam shaft in its correct place .i havnt dissassembled mine yet but im assuming thats theres an idler in the mix .i havn't found any manual or blown view so far.

[@kevsvintagetractorrepair]

hi sorry for the very late reply I do think there is a tool but I haven't found one yet.

[@noelobrien7743]

When i brought this on it wouldn't run and on dissassembly i found the exhaust ports were blocked with carbon . There was a hole about as thick as a pincil . the injectors were rebuilt and also the pump . Lookingat the pump drive housing , i see that theres been a bolt put thriugh the housing and presuming through an idler gear . So guessing its timed wrong /?Its all a guess ...

[@kevsvintagetractorrepair]

I would say its been messed around bit best to start from fresh so you know its all correct.

[@peterjubb5395]

You are doing an excellent job Kev. I’m enjoying your thorough and clear Commentary. Also, your wife’s photography has been great as well.

[@kevsvintagetractorrepair]

Thanks 👍

[@noelobrien7743]

cool ..hope you dont cut too much out , we like the foparrrs

[@kevsvintagetractorrepair]

I will be keeping as much in as we can the foparrs make it real.

[@DuffMF-gr5to]

Hi Kev super videos a great help .I have a crankshaft leak next vid will be a great help .My old lady breaths a lot and hard to start so I put elec heat gun to inlet and away she goes .A chap told me to put a 4.2 kw iskra starter on it to make her spin faster did you ever here of that being a help cheers

[@kevsvintagetractorrepair]

Hi yes a bigger starter and battery helps a lot.

[@Drottninggatan2017]

Did this one not have the mystery spring on the drive shaft for the pump? Some of them have a round spring that sits in the middle of the shaft.

[@kevsvintagetractorrepair]

Hi sorry for the late reply I have notest that some of the earlier 23c engines had the spring but then some did I guess it depends who's worked on the engine in the past.

[@BundyBearsShed]

Bloody hell the poor old tractor has been neglected. If only they could talk.

[@kevinrix994]

I know she hasn’t been looked after at all poor old thing.

[@ginand1000]

Thanks Kev very informative. Do you have all torque specs Regards Andrew

[@kevsvintagetractorrepair]

Hi Andrew I will try to get you some today what do you need.

[@noelobrien7743]

Ps . id like to reasemble the pump drive gears with the possibulity that its been out before and could very possibly be installed WRONG as it stands .What did the factory do ?cheers

[@fungaichitsunge]

Mr keves you are great . I am in zimbabwe africa, I need timing kit and oil pump and the head cylinder for my FE 35 23c engine. How can i get them from you sir

[@YannAndriamihaja]

Bonjour vous dite que vue qui a un carters en fonte à plus besoin retirer train avant pour enlever moteur sa risque d’être juste pour retirer moteur vue que à volant moteur ?

[@darrenblattner2508]

Thats definitely some gritty looking oil, metal pieces in the sump are never a good thing. I'm sure it's in good hands now. Keep smilin

[@kevsvintagetractorrepair]

I guess you never know what you’re going to find in these old engines! Thanks for commenting

[@fungaichitsunge]

Mr kevs, can a 3cylinder 135 engine fits on a FE 35 back end?

[@kevsvintagetractorrepair]

Hi yes you can with the adapter plate and the front axle carrier everything else is the same but the 135 parts have to be from a swept axle not a straight axle

[@fungaichitsunge]

Thank you sir, you gave me a positive spirit towards these little tractors by your videos

[@noelobrien7743]

Im needing the part where yoy do take that drive housing of and on . I guessing that there could be a setting up tool to reassemble it ? ?? I think theres an idler gear in there ! Its the idler shaft i need to repair .. Am i guessing correctly ?

[@kevsvintagetractorrepair]

Hi Noel thank you for your comment, I’m currently working on that set of videos at the moment they will be out soon.

[@noelobrien7743]

@@kevsvintagetractorrepair Thanks ..

[@noelobrien7743]

Mabey thats in Part 9 ??

[@tomicaristic3191]

Može prevod na Srpsko-Hrvatski jezik

[@noelobrien7743]

are those vids done ? and is there a link ? thanks.

[@kevsvintagetractorrepair]

They were recorded last week so will be out very soon.

[@noelobrien7743]

is there a link to the new vid ??

[@kevsvintagetractorrepair]

@@noelobrien7743 r There is it’s being edited at the moment.