Festool MFS Basics: Making a Template

Sedge walks us through using the MFS to cut a template. Plenty of tips and tricks
MFS Overview: • Festool MFS System Ove...
#Festool #Template #Routing
We are aware the MFS routing system is not available in the US and CAN. That being said, we are also aware that a lot of you have purchased this system and have some questions.
Affiliate for :
TSO Products : tsoproducts.com/?ref=cwmk4ofe
Kaizen Source : www.avantlink.com/click.php?t...
Taylor ToolWorks : lddy.no/1eoy5
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear
Panasonic 4K Ultra HD: amzn.to/3pXXPzX
Rode VideoMic GO : amzn.to/3vXOJqx
Sony MDR7506 Headphones: amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card: amzn.to/3i0iT4u
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Derick “Big D” Clements who has NO CLUE about woodworking but is ready to learn. Chris "cameraman" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
Website: www.sedgetool.com/
--------
Instagram: sedgetool?...
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com/@sedgetool?lan...

[@erwin757]

I am so happy about this video!!!! I asked it at every live show that I was in it ^^

[@sedgetool]

I'm so glad!

[@BW-cw4lq]

WOW. What a great template! Stay Positive Stay Sharp, with Sedge & Big D. Thank you for another educational KZbin.

[@sedgetool]

Thanks, will do Blake !!!

[@rutabegared1]

Great video. Thank you. Regarding router direction when hand routing, I always remember my highschool woodshop teacher's maxim . . . "Feed as you read".

[@sedgetool]

Great tip!

[@russellhuggett5177]

Another great video guys, great tip with the L finger router direction, I was telling a friend about router direction and I will call him and tell him this tip for sure. 👈👉 😁 The guide system does look really good, looking forward to see it making circles and oval etc. Keep up the great work guys 🤟👍👍👍👍

[@sedgetool]

Thanks Russ !!!!!!!!!!!!!!

[@robertlittle6453]

Outstanding video thank you

[@sedgetool]

Glad you enjoyed it

[@GJCOrado]

There is always something to add to my Fesdrool collection. 😜

[@sedgetool]

Wicked !!!!

[@thepaintprofessor]

Just bite the bullet on my first festool today. The only problem is that I didn't do it sooner! I'm on love!

[@sedgetool]

Wicked cool.... bought my first tracksaw in 2003.... never looked back.....

[@thepaintprofessor]

@@sedgetool I started out with the ets ec 125 and some granat. Completely changed my sanding game and zero swirl marks. I went from scratching the surface with my old sander to now I understand what abrading the surface is all about. I love the videos on both of your channels. Keep up the great work. I am a believer!

[@AlexK07010]

Thank you. What bit is that? The big pattern bit

[@sedgetool]

www.infinitytools.com/mega-flush-trim-router-bits the 1 with the 1 /14 length for around $90

[@ronh9384]

Thanks for the video guys. Is this still available in the U.S.? Thanks Ron

[@sedgetool]

nope...still available in Europe though

[@w.robbgraham7684]

Festool should bring the MFS back to North America and give you a commission on them.

[@sedgetool]

Thanks Robb.....

[@yousuflootah]

How can you use the template to make a serving tray out of a single piece of hardwood In an efficient and fast way?

[@sedgetool]

I would use a core box bit to do the perimeter of the tray with the MFS then I would use a straight bit for the removal of the rest

[@MattLitkeRacing]

I use double sided tape to hold the workpiece and the cut out

[@sedgetool]

cool..... I use too but was tired of peeling and cleaning....

[@MattLitkeRacing]

@@sedgetool I agree it can be a pain. I found Painter's Mate double sided tape at Menards. It’s a double sided masking tape that is easy to remove. It sticks well enough for my CNC

[@Jhursh]

Any idea where to get one? Festool won’t allow Europe to send to USA.

[@sedgetool]

Jim....I know of a few folks who have found them on eBay, craigslist and Facebook marketplace ....

[@w.robbgraham7684]

You should get Festool to bring this back to North America and give you a commission for each one sold.

[@sedgetool]

Thanks....

[@davidschieman3903]

How can we get one

[@sedgetool]

The MFS is available in Europe

[@gregpowers8095]

Woodpecker tools make there own version, but there expensive.

[@dacianmuntean]

MFS is an template, why making a template with a template?

[@sedgetool]

That is just the way I use it...

[@AaronGeller]

It’s replaces many small templates but some templates are complex and this helps fabricate them. As an example, I’m working on producing a valet tray/desk organizer and I need multiple pockets. This will allow me make a master template so I can batch out the product. Also, while there may be a rectangular cut out in the center, there may be curvatures on the exteriors.

[@AaronGeller]

I Hope. This. Helps 🫵