Never knew about the MFS , but now I do and I now know that I want it. And it is metric. Thanks Sedge for the video
@sedgetool2 жыл бұрын
Thanks for watching Ian !!!!
@allanwilliams6792 жыл бұрын
Great video full of good info Sedge. I purchased the MFS 400 System a couple of months ago after having it sitting in my Amazon Wish List for a while. It dropped in price and I went for it! Haven’t used it yet. But after seeing this video, I’ve already got several uses in mind. Thank you again. Looking forward to the follow up videos. Keep up the great work… 👍🏻
@sedgetool2 жыл бұрын
Great to hear!
@johnpeckham35852 жыл бұрын
Thank you, Sedge - great post!!! Please, Please, Please post more on things we can do with this system. Thanks in advance!
@sedgetool2 жыл бұрын
Will do!
@ericjackson29152 жыл бұрын
Great video, lots of tips, the rare earth magnet sweet - Thanks!
@sedgetool2 жыл бұрын
Glad it was helpful!
@ianharrison76462 жыл бұрын
Great video Sedge and all the team I now realise I need to order one 🤦♂️💯👍👍👍
@sedgetool2 жыл бұрын
Thanks Ian !!!!
@russellhuggett51772 жыл бұрын
Great video guys, I’ve often thought about getting one, now seeing this video I might keep an eye out. Keep up the great work guys 👍👍👍
@sedgetool2 жыл бұрын
Thanks Russ......... The MFS system is well worth it !!!!
@xinixxagnix2012 жыл бұрын
Great content & knowledge, hope you guys show us what we can do with it all
@sedgetool2 жыл бұрын
The videos are working....
@w.robbgraham76842 жыл бұрын
Why oh why does Festool limit the distribution of such wonderful products so that they are not. available in North America?
@sedgetool2 жыл бұрын
That is a GREAT question Robb .... I really do not know .....
@w.robbgraham76842 жыл бұрын
I can’t believe that the new MFT clamps aren’t available in the US.
@johnrussell76522 жыл бұрын
On my MFT I use a 1000mm profile as a "fence" -- I butt it to dogs dogs and clamp it in place -- and 4 of the 400mm profiles to make a square that I butt up against the 1000mm profile. I use that to square the rail to the fence. Doing cross cuts or rips I clamp the 400mm square and push the work piece against the square profile to make repeatable cuts. I'm sure there are other ways to do this and in future videos it would be interesting to see how to adapt the MFS profiles on the MFT for cuts.
@sedgetool2 жыл бұрын
Thanks John ....
@erwin7572 жыл бұрын
We can use it on doors with the provided brackets. But still did not use it like that to use the mfs as custum jig to make holes for door handles and locks
@sedgetool2 жыл бұрын
🤙👍
@ilirgorani42612 жыл бұрын
Awesome as always!
@sedgetool2 жыл бұрын
Thank you! Cheers!
@michaelpayne81022 жыл бұрын
Great video, now to the elephant in the room, availability - it hasn’t been available in NA. Woodpecker has an extrusion system but not some of the cool add ones (puck for example). On a side note NA isn’t the only market that misses out, the Sys3 slides aren’t available in parts of Europe.
@sedgetool2 жыл бұрын
It was available here in the states up to about 6 or 7 years ago........ The reason for the video is that there are a lot of folks that have reached out for help in setting it up !!!
@w.robbgraham76842 жыл бұрын
This can sometimes be purchased from Amazon UK and shipped to NA for either no charge or for a reasonable shipping charge depending on the whims of the Amazon algorithm through Amazon Global.
@SirLesMeyer2 жыл бұрын
Damaged my first MFS400 when I forgot to put back the template guide :) Still salvaged some of it by flipping it. Bought another one and the 2 together is quite versatile. Have used it often. Great accurate results every time. Square holes with steps are possible using different template guides (say 40mm and 17mm eg). Got rid of all the MDF jigs that have single purpose.
@sedgetool2 жыл бұрын
Great to hear! =The MFS is very versatile !!!!
@climbjay9 ай бұрын
This demo is SO AMERICAN!!! Great video though guys 👌🏼
@sedgetool9 ай бұрын
Thanks !!!
@stevankatanic56152 жыл бұрын
Thanks for the great videos bud
@sedgetool2 жыл бұрын
You bet..lots more to come !!!
@kevinc2683 Жыл бұрын
Sedge since, Festool cancelled the MFS have you seen or used the Otterbox tool.
@sedgetool Жыл бұрын
I have not
@alimaleki2172 жыл бұрын
The first thing I did after seeing this was to try to buy one but found out it’s no longer sold in the US!
@sedgetool2 жыл бұрын
The MFS is still available in other markets...just not in North America...
@MattLitkeRacing2 жыл бұрын
I had a job that I needed multiple templates for. I bought 20mm profiles and hardware to make my own. It works well obviously not a system like Festool. The support puck is a good idea might have to 3D print one
@sedgetool2 жыл бұрын
Ahhhhhhh....as usual .... Matthew you always think outside the box .... Great job !!!
@brendon722 жыл бұрын
Search thingiverse for FESTOOL MFSDIY if you haven't found plans for the puck already.
@MattLitkeRacing2 жыл бұрын
@@brendon72 thanks for the tip
@davecurda23502 жыл бұрын
Why is it not available in North America?
@sedgetool2 жыл бұрын
The MFS was at one time here in North America ....... Festool discontinued it for some reason...
@HillCountryDemo2 жыл бұрын
Sedge, how do I go about buying this system?
@sedgetool2 жыл бұрын
Available in Europe ....
@davidsoudek2 жыл бұрын
EBay Occasionally. I landed one a month or so back. Full set minus the 2000’s
@MSgtRic2 жыл бұрын
Two piece template guides are available in a set from Axminster Tools. The sizes are 10,12,14,16,18,20,24 and 30mm for $61.00.
@sedgetool2 жыл бұрын
Thanks Rick !!!!
@vlmiele2 жыл бұрын
Wish I would of bought it when I had the chance.
@sedgetool2 жыл бұрын
Still might find one kickin around on FB marketplace or Craigslist >>>>>>
@daviddiannapugh2 жыл бұрын
kzbin.info/www/bejne/pnXFeYZoetmZf7M This is you.
@sedgetool2 жыл бұрын
Thanks David....I remember .....Hope all is well with you !!!!!
@brentbutler31132 жыл бұрын
Hey buddy its Brent from the international tool days... squints and smalls... me and rich... how's it going... love to hear from you
@sedgetool2 жыл бұрын
Duuuuuude .... Smalls !!!! F-o-r-e-v-o-r !!!!! Send me DM on Instagram @sedgetool or email me at sedgetool@gmail.com !!