FF-117V2 Build Video

Build video for the new rcFoamFighters FF-117V2 RC Airplane.
Plans for this plane available at this Link: www.rcfoamfigh...
Link to 45 degree Bevel Cutter: amzn.to/2D4PyiV
The new FF-117V2 RC Airplane is a design inspired by the Lockheed F-117 Stealth Fighter. This version 2 plane is much more scale looking with all the angles on the faceted fuselage. Include Cockpit Glass and other decals are included in the plan set. As well both Tiled and Non-tiled versions of the Plans are included in a single PDF file. the PDF plan is available at the rcFoamFighters website via the plan store. If you are looking for a free plan, the older FF-117 version one plans are also on the website for free.

[@spetnazer]

One man who inspired me when i first time know RC plane

[@rcFoamFighters]

Thanks for the comment spetnazer!

[@LuisRussi750]

This design is outstanding Paul! Printed the plans today and it will be built before spring. Thank you for all you do!

[@rcFoamFighters]

Thanks Luis! Let me know how your build goes when you get time for it. Also just a note i am finishing up the Viper jet plans too... Hopefully in a week or two.

[@gastarbieter]

glad to see you back after so many years.

[@rcFoamFighters]

Thanks gastarbieter, we are planning to more videos in 2018.

[@parkflyerindonesia]

Glad to see you back, Paul! 👍😎

[@TovarVideo]

Yeah! You guy's started the foamboard crazy. I've made so many Skyfighter V2's. Still my favorite foamboard pusher. Great for FPV too.

[@danrr1197]

how big are the foam boards meant to be,like the 3 foam boards he used in the videoe.g A1, A2....

[@JoseMunoz-gg2cn]

Nice job and even better looking model!! Congrats to You! Happy to see your videos/ models again.

[@rcFoamFighters]

Thank you Jose! I really like the looks of this one too compared to my original FF-117. Now i just need the weather to warm up so I can go out to fly it.

[@NOXFPV]

Mine flys great. Thanks for the plans.

[@rcFoamFighters]

Thanks for the comment NOX FPV! Cool, Glad to hear yours flys great!

[@EagleEyeProductionsLLC]

Glad you’re back. I thought you gave up on this.

[@rcFoamFighters]

Thank you Eagle Eye. We should be back for more videos now. Frank and i were both distracted a while with drones, work and other stuff. We are hoping to do a bunch more RC plane videos in the coming year.

[@ememeable]

Merry Christmas And thank you

[@flyby8906]

Great design guys! Got the prints guys thanks. One project to finish first then the FF-117V2.

[@rcFoamFighters]

Thanks Gregg, let us know how your FF-117V2 turns out when you get around to building it!

[@JRIVERA1124]

And you forgot to say the cost is 6.00 for not saying it it’s should be free

[@dragonraopen2604]

This crazy bro ❤

[@peterjensen3162]

Show how the cuts and gluing are done, don’t just tell.

[@alberthcmgonzaleshjh464]

I wanted to see the b-2 Spirit plan

[@godd3vil447]

Nice

[@Metron_Ariston]

Hello i am excited watching rc plane builds and want to try build my own rc. I particularly like that model and the slik and fine finish of your work. Thus i want to replicate it. Is that foam board the so called depron sheets and what thickness is suggested? Is there a link that provides all the technical and material specs? Thank you

[@Dmarr75]

Nice video, can someone name/list the electronics recommended? (Servos, ESC, Battery, Radio Control, etc)

[@ronethridge9875]

very nice-great /thanks much

[@rcFoamFighters]

Thank you!

[@PCModelBuilder]

I need advice on the most cost effective (not cheap but not breaking the bank) radio to use for this plane. Help!

[@danieleduardonapancastillo5259]

Hello, I have a question, since I bought your plan, I wanted to know if the thickness of the foam board of all the parts is the same? and how thick is it? Greetings from Peru

[@rcFoamFighters]

Daniel the Foamboard available in the USA is usually 3/16 of an inch or about 5mm thick. All parts are the same thickness. I have seen people from around the world also build the plane with 6mm thick Depron foam and 6mm thick Cloroplast type board. Some have even used balsa wood. All of these should work fine, the only thing you may need to do if using a different thickness is make sure the tab slots are cut as thick as needed.

[@danieleduardonapancastillo5259]

Thank you very much dear for your prompt response, greetings!

[@TheThedeuce]

Great looking F117 Paul. Is it possible to purchase plans from you, but I am looking for a F117 with a ws of about 40 inches

[@rcFoamFighters]

John send me an email to [e-mail] so I have your email address to discuss what you need, then we can see what we can do. I should be able to size the plans to a 40-inch wingspan.

[@davidwatkin1484]

@@rcFoamFighters Hi Paul, just found the Depron world of foam planes, wish I had found your site earlier. Love your work, beautifully presented plans, instructions and videos. You guys stand out in the crowd. Did you ever upscale the F117 to 40"? If so, Id be pleased for a link to the plans. Just subscribed. Keep up the great work, inspirational for our hobby. Merry Christmas from W.Australia

[@fubar5884]

Wish I had found your site earlier! I bought your plans and I'm currently about 85% done with the build. I was just thinking to myself if it would be possible to turn this from a 2 channel bank and yank to a 3 channel with rudder control. Did you ever think about adding another 2 servos on for rudder control or know of anyone that tried this with your design?

[@jinsvi]

very nice but i wish you sold it in a pre cut kit. i would buy one.

[@danrr1197]

how big are the foam boards meant to be, like the 3 foam boards used in the videoe.g.. A1, A2....

[@soumyahugar7333]

can you get me the video of eurofighter typhoon model making

[@mikipc9455]

Disculpe el costo de los planos es 6 pero que dólares? Pesos mexicanos? Euros? Me podría resolver esa duda gracias

[@toadred1]

@rcFoamFighters are there links to the motors, servos and recommended materials?

[@rcFoamFighters]

Daniel, the original plane was made with a Grayson hobby super mega jet. I do have some basic links on our website at this link: www.rcfoamfighters.net/recommended-parts You can also go straight to Grayson hobby's website. graysonhobby.com/drone-airplane-electronics/brushless-motors/graysonhobby-brushless-motors.html

[@williamclark3671]

Hi nice video!

[@oliverkenyon293]

Can you print seperate peices on an a3 printer

[@quadflopper1012]

what is base wood and where do you get it?

[@emanuelefancellu4721]

Bellissimo

[@MdAshraf]

Bro we need THE drawing of the plane.

[@mehadyhasan1965]

F117 plan

[@davidwatkin1484]

😩😢😥😢 A JET WITH A PROP. 😪🥴😥😓