Fiat 500 , 126 - 5 speed gearbox inner workings and rebuild

Video from assembling of fiat 500 126 5 speed gearbox
#fiat126 #5speed #gearbox #maluch #racegearbox #126gearbox
Visit our Fiat 126 eshop- new and used parts for your project - worldwide shipping
www.126fan.sk/...

[@Matuskamotorsport]

Hi Guys , if you like my video&find it usefull for you and you want to support me you can do it via superthanks button :) Thank you :)

[@marianomoralesinfante8184]

Donde puedo comprar ese kit para serla quinta

[@Gabriel3516]

Szia matuska tudnál segiteni nekem hogy meg tudjam én is csinálni 5 sebességesé a váltót köszi

[@Matuskamotorsport]

Sorry mate, I dont speak Hungarian, can you please write it in english?

[@jimspillings9724]

Hi Martin, great video. I have a gearbox that has a 5 speed conversion already fitted. In my case the casing holding the modified gears is longer than standard (+/- 34mm) and hence the standard linkage (which has the rubber) between gearbox and shift rod is too long. Is this longer casing normal and if so do I cut/drill the linkage to accommodate the difference? Appreciate your help.

[@Matuskamotorsport]

Hi Jim, yes, you are right, I forgot to mention it in video, every 5 gear kit case is bigger and soo is needed to make shorter linkage. Aswell modify the gearshift mechanism-cut half of reverse aretation so you can shift 5th gear without pressing the gear stick

[@jimspillings9724]

@@Matuskamotorsport Thanks for confirming that. One other question please - I'm a newby to Fiats and bought a basket case car which I have rebuilt. Please can you tell me whether the gearbox shift shaft and the gearshift rod coming out of the tunnel should be on the same level? When I installed the motor/gearbox I found that they were not which is not great for the shifting action. Do I need to put a spacer between the gearbox mounting bracket and the chassis mounting point?

[@Matuskamotorsport]

@@jimspillings9724 originally there are not any spacers, but Iam not sure if I completely understand what you mean, please send me photos of it to [e-mail] and will look on it :)

[@jimspillings9724]

@@Matuskamotorsport Thanks Martin. Give me a day or so as I have it out of the car right now. Cheers

[@bakerandy2789]

instaBlaster

[@galochaves]

Great video. Thank you. Did you need to modify the shift lever inside the car?

[@Matuskamotorsport]

Not at all 🙂 yes, you need to cut a half of reverse aretation metal, so you can shift 5th gear without pushing the gear stick down👍

[@galochaves]

@@Matuskamotorsport Wow! Thanks for the fast response!! I am in the process of making this conversion. This was very informative and helpful! I am subscribing! Stay safe my friend.

[@Matuskamotorsport]

@@galochaves Thank you :) stay safe too :) If you will need any additional help or some spare parts for Fiat 126 feel free to visit our store/site - www.126fan.com

[@borismalinovsky9779]

Ahoj Martin, rozumiem ako prerobiť prevodovku pomocou kitu, ale ako potom funguje samotne radenie (kulisa).. tiež sa tam niečo prerába??

[@Matuskamotorsport]

Ahoj, ano, musis vypilit z aretacie (spiatockovej) prednu cast (od neutralnej polohy) do predu , tak aby sa dala radit 5ka bez stlacania paky... zaroven odporucam kupit ozdobnu kulisu radenia, lebo bez nej a aretacie trafit 3ku dost problem👌🙂 ak by si sa na prestavbu necitil napis mi a dohodneme termin/cenu poskladania🙂

[@borismalinovsky9779]

@@Matuskamotorsport Dík za info.. a originál 5 stupňová prevodovka sa predávala v nejakej výbave(roku) do 126p/500 ??

[@Matuskamotorsport]

@@borismalinovsky9779 nie, je to aftermarket uprava, original ziadna 126/500 nemala 5st.

[@snsayy]

is it faster now ?

[@Matuskamotorsport]

Yeah

[@lampredi]

Hi, do you have an email I can contact you on ? I have a 126 gearbox attached to a BMW K75 Thanks AJ (New Zealand)

[@Matuskamotorsport]

Hi, yeah, you can write me at [e-mail] 🙂👍

[@Gabriel3516]

hello Matuska I want advice I want to make 126p the changer so I can do it 5 speeds please could you write thank you

[@Matuskamotorsport]

Hello Gabor, Iam sorry but I dont understand what exactly you need to know, can you please describe it better?

[@Gabriel3516]

@@Matuskamotorsport hi i want to ask you how to do to make the 4 speed transmission 5 speed what do i need and how can i stand by her could you tell me step by step thank you

[@Gabriel3516]

they want professional advice from you, how to make 5 out of 4 grades for 126p? thanks 

[@Matuskamotorsport]

@@Gabriel3516 you just need to buy 5 gear kit from Italy, thats all. Everything else you see in video 👍

[@gabrielbelecciu9176]

Hi. I am the owner of a Fiat Cinquecento ED engine code 170A.046 (AISAN carburetor) and I want some explanations if you want of course. in my country (ROMANIA) there is no such engine and gearbox even for dismantling. But there are other Fiat 126p models, Fiat 126bis, can I use something from them ??? crankshaft or other components, gearbox can partially out of take ??? If I didn't write correctly it's GOOGLE TRANSLATE's fault;)))

[@Matuskamotorsport]

Hi, did I understood you right that you want to ise 126 gearbox or its parts for your Cinquecento? Iam sorry but this gearobx is completely different and you can not use nothing from it for your cinque 😪

[@gabrielbelecciu9176]

@@Matuskamotorsport Hi. Thanks for the answer and advice. So I have to buy another car from Italy or Poland exactly the same. Good luck in your races and with the KZbin channel

[@Matuskamotorsport]

@@gabrielbelecciu9176 exactly :) Thank you very much :)

[@mickmarfia8589]

Come rebuild my gearboxes please

[@Matuskamotorsport]

Where are you from?🙂

[@mickmarfia8589]

Matuška Motoršport Sydney Australia 🇦🇺

[@mickmarfia8589]

Matuška Motoršport I got three 500 motor and boxes and two engine and boxes 126 niki

[@Matuskamotorsport]

Ou, thats pretty too far from Slovakia/Europe 😪

[@Matuskamotorsport]

But maybe If you have some technical skills and tools I should manage a payed live stream specially for you and we should unscrew and rebuild the gearbox together. If you are interested you should contact me for details at [e-mail] :)