Fiber laser 50W Raycus engraving and cutting machine for 1mm silver cutting

[@ishanekanayake-x2o]

dear friend. after cut is the pendant need polish ? . it is missing on vedio . what is the missing process ?

[@tiffanytiam-lee1780]

What parameters did you use for 50W Raycus cleaning and cutting?

[@anthonyramos3741]

Hi daughter, thank you for sharing your expierence and expertise. ❤

[@Daniel-rz7sh]

Where we can buy the clamping device (the machine to attache the brass plate)

[@BGCNCfiberlaser]

eBay or contact us [e-mail]

[@dziorgas]

I need your advice. Which 50W fiber laser is better for cutting and engraving silver sheets: JPT or Raycus, or is there no significant difference for silver? Also, what lenses are preferable: a 110 x 110 mm lens or a lens with a smaller working area? Thanks for your answer.

[@BGCNCfiberlaser]

Hi, sorry for just saw your comments, you can use 100x100mm lens, 70x70mm also is fine. For cutting, silver, no significant difference between Raycus or JPT. When laser source has problem, JPT brand has monitor software and we can confirm if that is laser source problem.

[@MasterblasterCoreldrawDesigner]

I have 60w jpt source good results

[@frankbemo]

@@BGCNCfiberlaser Can you tell me which one is that monitor software and we can confirm if that is laser source problem?

[@BGCNCfiberlaser]

@@frankbemo it depends on your laser source model

[@frankbemo]

@@BGCNCfiberlaser My laser is jpt mota 60 w

[@luismosquea9261]

I would like to know which font was used for this name?👀

[@vilalaser]

What Wobble configuration did you use?

[@BGCNCfiberlaser]

0.2x0.02mm

[@TaymiRodriguez]

Por favor me puede dar más información de esta máquina y su precio, gracias.

[@antonioalbertoonline]

What lens do you use on the cutting machine? I have the 300x300 and it doesn't cut.

[@mkutsavvlogs2799]

110*110

[@antonioalbertoonline]

@@mkutsavvlogs2799 your video shows how many millimeters to cut metal?

[@mariaoliver87]

Hi! Thanks for the video! Can I ask you wich lens did you use here?

[@BGCNCfiberlaser]

100mm x 100mm

[@octopus_4192]

Hi can you share with me the settings for cutting 1mm I bought one and I don't know how to cut

[@BGCNCfiberlaser]

power 95 speed 200 wobble 0.2x0.02mm 15 loops lens 100x100mm

[@octopus_4192]

@@BGCNCfiberlaser Is 110*110mm lens the same as 100*100mm?،Also, do these settings apply to copper or do they have different settings?

[@stema84]

How much time did it take and did it need any post processing (cleaning, deburring, etc)?

[@BGCNCfiberlaser]

yes, need to be polished after cutting

[@Tenchi001]

Im new to this so one question, if a want to cut a thickness of 2.0 mm of silver, i need a more powerfull laser or the same one but more time to cut the piece??? Also can i cut gold on this machine?

[@BGCNCfiberlaser]

2mm is a little hard to cut by fiber laser. Laser has focus depth, if material is 2mm, the cutting edge is not straight. I can explain to you if you message me on WhatsApp:[phone]

[@erumaithi]

Hi, thank you for your video. one question if i want to upgrade from for example Raycus to JPT , can i just replace the module , or do i have to buy the full machine ? thanks

[@BGCNCfiberlaser]

If same power, you need to change the laser source. If power is different, you need to check power supply also.

[@erumaithi]

@@BGCNCfiberlaser thank you. one last question , for JPT they have 2 different model the LP and the M7 which model can cut better and what is the main deferent between them.

[@BGCNCfiberlaser]

@@erumaithi LP is Q switched laser source; M7 is mopa laser source: www.bogongcnc.com/blog/The-difference-between-Q-swtiched-laser-source-and-mopa-laser-source-.html

[@endred.1600]

Hi what are the parameter settings for cuting and cleaning? Did you used wobble?

[@BGCNCfiberlaser]

yes, i use wobble. Your machine power? Could you contact me by whatsapp? 008615990901252

[@endred.1600]

@@BGCNCfiberlaser 50w JPT

[@BGCNCfiberlaser]

@@endred.1600 cutting P98 S 200, wobble 0.2x0.02; cleaning Hatch 0.05, power 20, speed 1000, cancel wobble when you cleaning it.

[@endred.1600]

@@BGCNCfiberlaser Thanks.

[@fideltadeo]

@@BGCNCfiberlaser How many layers do you use for 1.0 mm?

[@mikevazquez6165]

Hello what material was that and where did you purchase it??

[@BGCNCfiberlaser]

this is 925 silver.

[@prontosinistri2939]

price ?

[@BGCNCfiberlaser]

Below 3k, pls contact us [e-mail]

[@sonysky1549]

i want to buy a 50w machine please can you give me details?????

[@BGCNCfiberlaser]

yes, sure, pls contact whatsapp: [phone]

[@syedakmal]

Hi, what's the price of the machine

[@BGCNCfiberlaser]

around USD3000-USD4000

[@initiaticsolutions4822]

Can you give me any of your contact in India who purchased your laser, please

[@BGCNCfiberlaser]

We have agent in India , pls contact by whatsapp: wa.me/message/YDILPYWHVB6OH1

[@sambaljerittofficial]

Hai, Do you have agent in indonesia ?

[@DwaneKhan]

Price of the machine plz..

[@BGCNCfiberlaser]

under 4K USD, you can contact me: [e-mail]

[@جمالفيصلالبني]

كم ثمن مكنة فيبر ليزر ٥٠ واط

[@BGCNCfiberlaser]

تحت USD4000 ، الرجاء الاتصال بنا عن طريق whatsapp أو البريد الإلكتروني. ال WhatsApp: [phone] ؛ البريد الإلكتروني: [e-mail]

[@جمالفيصلالبني]

@@BGCNCfiberlaser مرحبا اريد سعر مكنة ٥٠ واط مع مواصفات الفنية

[@BGCNCfiberlaser]

@@جمالفيصلالبني من فضلك قل لي بريدك الإلكتروني؟ ثم يمكنني أن أرسل لك. يمكنك تكلم الإنجليزية؟

[@جمالفيصلالبني]

لا يمكنني كلام انكليزي

[@جمالفيصلالبني]

يوجد واي شات

[@prafulkumarsoni2460]

Iska price kya hai hamko chiy

[@BGCNCfiberlaser]

USD3650, pls contact us by whatsapp: [phone]

[@chandugameplay573]

Price kya hai

[@BGCNCfiberlaser]

around USD3000