Fiberglass Door Fix 3 Plus Window Run Channels

34 Ford Coupe Kit Car Build
We sling fiberglass ... we know things and we build stuff!
#ratrod #hotrod #streetrods #DIY
MUSIC BY: elevatedjamtra...
KZbin: / elevatedjamtracks
Tell them Rat Rod Bob sent ya!

[@cobyburrow9339]

This car probably never would have been built if you hadn't come along. Great job on the doors

[@tomsawyer247]

Bob, you don't just make stuff. You make coool stuff

[@dipe277]

Bob on his mini chopper. View from the handle bars...A cartoon on a T-shirt, bibs, googles, beard parted in the breeze. Perfect!

[@josermalavejr466]

He should print up some cartoon shirts of that and sell them.

[@cuttnhorse2013]

Been watching you for years. Haven’t commented much, but you’re always doing great work. I’m 70 now, sold my street rods. Came up with stage 3 renal cancer, chemotherapy etc. so I am in the process of coming back, strength wise. Keep up the great work, some of us ole guy’s and gals enjoy your work!❤ Ronnie East, Tennessee

[@demnis]

hey HI again Rat Rod Bob from the D Mi 😎 hey thanks for sharing another great video update on your Rat Rod 👍🤩 I can't wait to see the Rod on the Road 😁🔥

[@rogerpeter6859]

Just can't help it Bob every time I watch you working on that fiberglass I start itching!

[@darwinfoster7420]

Me also

[@mikehays8404]

i have a 30 coupe im doing and yeah the itch is real.lol

[@mikewilliams2072]

I am 68 and every time I watch your videos I learn something new and I have been messing with cars since I can remember, my Grandmother was a school teacher and she told me once that if you don't learn some thing every day you just wasted a day!!!!

[@martinharris5017]

Having scratch-built a fiberglass rod body I really admire your determination and perseverance Bob! I remember the itchy skin and sticky resin all too well. Some builders mock 'glass as "not the real deal" but it's harder than one might think.

[@randyhorton8369]

I always look forward to your videos.. And I learn loads from you. Thanks. Keep putting them out, I'll keep watching...

[@larryanderson8049]

Looking good Bob!...nothing wrong with a little slick. with a big helping of rat!

[@TheCanadianBubba]

With what you had, and where you started from, there aint' nothing wrong with those doors Bob 👍 Look forward to more !

[@wesleypulkka7447]

Hey Bob, excellent video as usual! Thanks!

[@peterwall4739]

Real dark blue with your silver denim rub would look nice on that unit...👍

[@stevespangler6042]

I really like what you've done, Bob. I didn't think anybody's shop could be hotter than mine. You beat me by alot! Stay cool , brother.

[@DesertRatFabrication]

Looking great Bob, like it just the way it is😁😁

[@mcabkeller]

Pretty cool new smell walking in your shop now. Got that boat shop smell.

[@RatRodBobBuilds]

True!

[@rodneylustila4520]

Common Bob,I don't know anyone really who would have tackled that job much less make it come out that nice.give yourself a pat on the back.Great job Bob.

[@shadcockman5471]

Just wanted to say thank you for all you do and putting out awesome and educational videos for us!! It's a joy to watch!! Keep up the good work friend

[@williamproctor898]

You are doing the one thing that I watch these videos for and that is building Rat Rods. Full steam ahead and keep doing your thing 😊😊😊😊😊

[@garyhughes9199]

It looks real tuff Bob. Nailed the stance!

[@majicmancoo]

makin' your own window run channel, outstanding.

[@tonyshepherd39]

That was a pleasure to see you Bob !👍😁

[@redmike7911]

Hi Bob, really like your channel. BTW in the Paintless Dent Removel (PDF) they use 99% pure isopropol Alcohol to remove the hot glue. Great work!.

[@geoffreymills9932]

I dig that little bike,I think it's cool and looks great, that springer is over the top and the golf cart wheel is a big part of the down and dirty chopper look, yeah there may be a few issues with the door but I agree with the Last comment that you were the only one who had the vision to even build it so who cares about a belt line being off a bit, I think it's a great looking car, great job as always Bawb

[@BCAutomotive]

Great work Bob you are very Talented Young Man

[@richardsmith-qy6vl]

I love the stance of that coupe and the rims and tire fit it perfect

[@shanewright6958]

Looking good Bob 👍👍

[@steveanderson3942]

Love the mini chopper ❤

[@chuckster6513]

Hey Bawb, You can make it a rat hot rod ! I don't think it needs stitches to be a rat rod, but it is your car to build as you wish ! I am gonna watch either way ! Try to stay cool, Heat strokes ain't no fun ! See ya next time.

[@briankinnear7461]

The doors look great considering what you started with. Love watching you craft all these pieces and make them all work together. Great video. Look forward to more. Be safe and stay well.

[@eddiereeher7594]

good show ol Bob😎👍

[@kevinl.2291]

Very cool Bob. Looking forward to see what all your going to do with this Rat Rod. I know it’s going to be good. 👍😎✌️

[@markgriffin9699]

Stay C😎😎l Bob!!! Your not hurting my feelings cause the amount of work fiberglass takes to make perfect is a chore!! Preciate ya!!!

[@stansmith1911]

I look for you every day. I seen you post so I said let me see.I think its great. Im not gonna go lookin for fault. If you painted it without the stitches it would look great Bob. My friend here awhile back purchased a new motorcycle with a V Twin briggs 25 horse power. It had a centrifugal clutch with a jack shaft to a chain drive. He said it would run 70 easy enough. It sounded real good.Thank you for posting. Im working on my wife's c10. Going slow but I almost got the frame painted.

[@garrymcgaw4745]

At last... another video. thanks R R B 👍.

[@batball28]

You said Bob a Custom Rat Rod the best of both worlds. Always enjoy your videos

[@randyadamshack2785]

It looks great Bob! It's better than your average Rat Rod for sure! Keep up your great work it looks cool...... Anyone would be honored to have! Can't wait to see it finished.....😊

[@Daniel-n5v5s]

Looking good Bob 💯🇺🇸💪

[@heathvice8365]

Looks like you about got the doors whipped.💯

[@robertmaclachlan1599]

omg seeing bob ride that way was like watching boris the anilmal in mib3 was just to funny

[@MrCaprinut]

Thinking the same thing!

[@jayburrough4308]

Never get to old for toys or to ride them lol 😅

[@Reddog08]

It's gonna be bad a$$ no matter what. We love to see your creativity

[@ez87gn56]

Dammit Mr bob , that looks great !

[@snupi_nut]

A tip , in PDR they use rubbing alcohol in a sprayer to soften the hot glue for removal. Just a little bit easier. 😊

[@tonypatrick9362]

Looking good Bob, keep building your rat rods, Bob and will keep watching them

[@user-lj1hi4xh6o]

Bob, good job . The car is looking awesome

[@joegarage6132]

I've got a 32 5 window that I am adding metal cowl vent, movable front windshield which will be some real work on the inside to make a metal form. The body is fiberglass so I may fool the purists, oh and also adding drip rails. I may even add some metal to make it look like rust when i paint the body. I bought this from a buddy that could not finish the car, It came with engine, trans, seats and on and on. True kit car. Luckily I do not have the bad gaps and such on this car, all the doors and trunk close really well. All that to say that I watch you for knowledge and seeing how you make your cars. Whatever you do I think its great, I would not change anything you do. Thanks for all your sharing, great job. Btw your video on building c4 trans has me tearing into that rebuild on another car, never done it hope it works.....

[@stevecr8934]

As usual. Rat Rod Bob give us another lesson on his 1st taste of working with fiberglass. When he brought that big ole Eye dropper out. I knew we were in for a Class. Bob is definitely a Builder. Not a restorer. Cause his stuff is his. May look like a Ford but it's Rat Rod all the way.

[@uglykidmoe150]

think we probably all agree, you, along with your tremendous skills are a national treasure rrb

[@Dieguito600]

Hello Bob! Here Diego from Argentina! Excellent work, very inspiring, makes me want to get to work Now! ha ha ha I've been following you for a while, but I've already seen most of your videos, on with the cars, long live the Rat Rods! A big hug! 🙌

[@larrylazure4288]

Just found your channel today. Man you do great work. What I like is you waste nothing.Bad Chad has nothing on you. My new channel to watch. The lines on that are great.

[@randyhorton8369]

Always watching genius at work. You truly inspire me to work on my project....

[@hooligan_56labelle22]

Always enjoy watching you turn a pile into a cool hotrod

[@shotsrodder]

Nice fix Bob 👍

[@darrelkinney9856]

Nice video like watching the fiberglass work cool job.

[@TimothyRexrode]

Looking good no matter hot rod or rat rod master fabricator

[@floridian7143]

You're doing a great job with what you have. Keep up the great work!

[@h20base]

You are doing a Mighty fine job on the rat rod.. You take a lot of time to make each piece fit just right, and there is probably 5000 pieces.. It will be great.

[@silktat2803]

Hey BAwb I thought you never did fiberglass before, well your figuring out pretty quick!!!!!

[@drich2766]

Awesome lawn chopper!

[@beachidiot]

It's gonna be great Bob.

[@laurensmith1828]

Thanks Bob for another class on rat rod ology . I learned a bunch today . Ill be dreaming about doing the window channels on my 41 chev. Thanks again!

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job ❤❤❤❤❤

[@jeregriffith6277]

always great job, and learning something from you, thanks

[@RusThompson]

All I see on the door is the body lines and a small dent from a hammer under the top body line. The damn car is looking great Bob!!

[@garycamara9955]

A dent in a fiberglass door?

[@slvrktman7824]

Looks great to me. Just needs a Rolling Bones style patina paint job. Ruff around the edges Hot Rods are the slickest looking anyway!

[@shanethompson7543]

Looks good enough for a rat rod!!

[@bobbyhallmark5189]

Great job as always.

[@nicholaspatterson9275]

I think the name of this car should be "Dirty Red" . Red paint with the black distressed look. Loving the build. Keep em coming Bob,watching and learnin!

[@shartne]

Wow those forks are homemade I thought they were actual springer forks. Nice. fiberglass door repair is great, your doing a nice job did you know your doing art work I used to work in a fine art foundry so I would know. I really really enjoy the rock guitar metal music you use it is so nice. I wish I had a mini bike chopper like that. I wish I was your neighbor so I could come over and help you do your art work.

[@kenfrazier616]

the talent you have, wish I would of seen this when I was working on my 1969 boston whaler repairs. So good looking progress. Maybe up on the upper A pillar the curve?

[@throttlewatch4614]

The mini chopper is cool

[@ronmurphy9819]

Cool Job!!! You seem to teach me something new every time. Thank You keep them rat rod coming.

[@sundown...7718]

I've learned so much from this channel. Definitely one of the best shows on the Tube !

[@OGTtom]

Great video Bob really enjoy the content , thank you for posting

[@521farmer]

Howdie from Canada 🇨🇦 Sk thinking ya got a dream and it's coming true Bob ya got this ya bound to fix it with Rat 😂Rod Technology at its best ya got me thinking ya can build toys why not build one too so build a rat rod bike got some parts just trying to find springs for the forks then building time we ain't got heat like ya but we got lots of rain so taking day off without pay cause l can keep ya posted on ya email ok Bob ya doors ya got this be sweet when ther done ya make it look great with all ya do glad l signed up cause at our age ya gotta be a kid not rocket scientist don't pay no fun in it later Bob 😊

[@waynegrant9594]

Happy 4th of July Bob !! Tell Red to get to work !!

[@jasonshaw9240]

Looking good Bob you'll get it done. 👍

[@edwinreece438]

Hats off to you for working in that kind of heat!

[@russellmurphree3181]

Great work, Rat Rod Bob! Maybe a visor would look good on your ratrod.

[@charleskeziah4810]

Take it easy and stay cool. I'll see you later.

[@jameslarkins2736]

Your the man Bob. Cant wait to see how you come up with the stitches on the fiberglass.

[@RatRodBobBuilds]

In due time ... those stitches are gonna be great!

[@jrehtil1494]

Nice job on the doors

[@ericbishop5484]

The car looks great man!

[@charliemclaughlin1042]

Your a awesome man Bob your very smart 👍👍👍👍👍

[@justinkorpela7955]

Looking good your skill never ceases to amaze me 😊

[@louiscornwell338]

We're from the south, heat and humidity are part of life

[@johnkranz4004]

Definitely nice Work Bob coming along Nicely

[@matscarlsson3336]

Man wath a cool bilen 😮😮😮😊

[@nicolasstanley1392]

Bawb could legit roll with a bike gang on that chopper after this upload

[@biglakehotrods381]

Glad to see the channel growing.

[@donkintz281]

Great video Bob love the car and all your hard work buddy

[@donlandenberg8126]

Thanks for sharing with us today.

[@Hopalong..75]

You are an amazing stuff builder Bawb. Im diggin it.

[@garycamara9955]

If you make your forms out of thin aluminum sheet you can peel them off the fiberglass when it hardens. You can make many shapes this way.

[@RatRodBobBuilds]

Yea got plenty of thin aluminum. Gonna use that technic on the trans tunnel.

[@RickyLangford]

It's looking good

[@Matt-s4y]

Looks good to me Love it

[@garycamara9955]

I rebuilt and reenforced an Oftedal body for a GTA Camaro. I was white with fiberglass dust. Too much dust to make me itch. I did have a good exhaust fan on the side of the building.

[@ratrod6161]

Doors look awsome car getting a great look

[@hooligan_56labelle22]

Just a thought came to like a shot in the dark. Paint this one shiny white and call it THE WHITE WIDOW.