The Rocky Aoki Porsche 911 Limo ... a Twin-Targa Once Again!

Рет қаралды 12,657

Күн бұрын

Пікірлер: 158

@jedgarren2901 9 ай бұрын

If this were my project,I would immediately begin scanning it into the computer. You're going to be fabricating so many one-off items that 3-D printing so make your fabrication easier and once you get it actually scanned into your system you will be able do so much more beyond fabrication

@freddyhat9796 9 ай бұрын

You can make a cardboard windshield take it to the junkyard and see what window matches the cardboard.

@SKYLINEMANNING 9 ай бұрын

That welding was giving me flashbacks of when I tried to weld for the first time at uni. Tried making a frame to turn an old recaro into an office chair, not pretty.

@TheBrokenLife 9 ай бұрын

Since you're cutting the floor out, it seems like it could be a plan to build an X frame down there that ties into the suspension points, reinforce the rockers, and then tie it all together. Basically it would resemble an early GM X-frame _plus_ a perimeter frame, but as a unibody structure. Since you don't have to package "normal" rear wheel drive stuff, and the interior interior is going to have to be custom anyhow, you could make the X just about as heavy duty as you wanted...

@Jasontyo 9 ай бұрын

a Modern NA flat 6 with adequate power is what this car needs

@iamsuprmn1 9 ай бұрын

Tavarish just took a Stroker motor out of a 911. That should have the power you need, be a Porsche engine and available. Give him a call.

@cliffdavis 9 ай бұрын

'if you were involved in building this car, please get in touch' smack in the middle of 6 minutes detailing all the reasons the original builder shouldn't be allowed within 20 yards of a welder. absolutely love it.

@ArtVandelayOfficial 9 ай бұрын

Vini Bergeman

@hypasteve 9 ай бұрын

Thumbs up, and a comment in the hopes youtube tosses another buck in your direction. It's such a cool project!

@Adam-ir6rn 9 ай бұрын

If it was me doing this I would do cage hoop on the front tied into the frunk, the same for the rear. double hoop in the center, With X bracing connecting them in the middle on the sides and top. To tie the front, center and rear together you could do drift spec door bars which should give you enough strength and also keep it looking cage free from the out side.

@vwfanatic2390 9 ай бұрын

I get that you have to be budget minded, yet have aspirations of Singer glory, or wishes for an engine from them, and here comes the big but, BUT, PLEASE try to keep it air cooled 911. See if you can do a colab partial series with a lesser known KZbinr who could really help and use a boost to his YT channel. I’m thinking The911Den might be able to help and benefit with a colab. You help him acquire the engine and parts, he does the rebuild, or something like that. Anyway, really glad you’re doing this, thanks.

@MRMERLIN_021 9 ай бұрын

The VR6 engine is a cool idea.

@gafrers 9 ай бұрын

Great to see an update on this. 👍👍 You'd be surprised how bad some "premium" limousine shop make their cars.

@alfaksa1 9 ай бұрын

Can’t wait to see this fully rebuilt! You should make the interior look as stock as possible.

@kylebarns 9 ай бұрын

Car looks better already guy’s. Be cool to see it built with the old 911 style. Always a favorite. Turbo v6 would give it some punch.

@stormsurfin 6 ай бұрын

I'm very excited to see where you take this project. Thanks for bringing us along on your journey! Twin Turbo Porsche motor FTW

@hemi398 9 ай бұрын

Hi Matt. This looks to be a step-by-step-inch by inch project with a hundred little things coming together. I wish you luck.

@AE86Matt 9 ай бұрын

Hello there!

@DavidLucas-hf1cx 9 ай бұрын

Not that I’m justifying heavy Bondo use.. but I think that was pretty common in the day for anything that was a “show car”.. a lot of those cars were considered temporary and they just needed to sell the look. My buddy had an early Barris car.. when you looked underneath, it was all scabbed together angle iron going in all kinds of different directions.. they were only concerned with what you saw from the outside for the show circuit.

@kevinrowley2579 9 ай бұрын

I think the issue with the back door windows is that they appear to be full 911 doors with the vent windows removed from them. Since you have to rework the center targa bar, maybe you can recontour the shape and put the vent windows back onto the rear doors, which should allow the use of 911 windows.

@jsimsgt96 9 ай бұрын

Looking forward to this build!

@MikeStavola 9 ай бұрын

I broke down a couple limos in my day, and I can say that the fab in this is 100% normal limo work. Remember that most limos get junked only a few years after being built out of old bedframes and sign posts.

@isaactrockman4417 3 күн бұрын

Limo crashes are really horrible too. There’s no standards for the work or safety really at all

@murdoc6501 9 ай бұрын

Great stuff and looking forward to the build! Go Ficarra, keep moving forward!

@markherd3116 9 ай бұрын

Engine wise, how about a subaru imprezza sti boxer unit?

@jameotech 9 ай бұрын

Great you're so enthusiastic & serious about this car, taking all the right steps to give it the best chance to live again! really interesting seeing the strip down, is set to be an awesome KZbin series keep the vids coming 👍🏻

@DocGamerGirl 9 ай бұрын

John looks fantastic

@briandrake9467 9 ай бұрын

That's what I was thinking, don't talk s to John he's built like brick shit house.

@brianpittaway1610 9 ай бұрын

You have too much fun! "How it HAS TO BE!"

@violinmiata 9 ай бұрын

A whole car triangulation of a role cage is a great idea. The facial hair makes you look ten years younger! Rock on Ficarra!!

@rjnation5042 9 ай бұрын

It's clearly a top notch build, & after seeing many limousine tear downs it looks exactly as I would expect, total pos, but hell I'm looking forward to seeing how you make it better, Rj in Oz

@zx1100a1 9 ай бұрын

Hi John 👋 Very much looking forward to this update.

@FicarraClassic 9 ай бұрын

You and me both!

@FreddyFunderbunz 9 ай бұрын

Experimental hat man. A hatted man of the experimental persuasion.

@avmelidor 8 ай бұрын

It's going to be better than new

@HenryAlamoNavarro Ай бұрын

Since yo have to make all rew reiforcements, you should try to find a period correct Targa arc (roll bar) for the middle, and 2 original doors with out the triangular windows to substitute the shortened ones; and then you will have better access to the rear seats, you will be able to make a propper reinforcement to the middle secction so it looks more original, a better transition between the door and no special glass for the windows...

@janwergeland5586 9 ай бұрын

Great series and project. Agree that improving the floor structure at the back is a good idea. Bmw built a 2002 targa model in the early 70s. Maybe something in the construction there can also give tips. The mentions the VR6 engine with a link to Porsche, What about the Audi 2.2 inline five, Porsche helped to trim this for the Audi RS2.

@wvuvino21 9 ай бұрын

They're Adjure "trilient cut or Tri-bar diamond cut" motorcycle headlights

@jefferysmith3930 9 ай бұрын

I agree with an earlier comment that the rear windows are likely 2dr Golf/Jetta pieces….the shape seems about right. I notice hair/facial hair color in the beginning but had forgotten all about it by the end of the video. I do like the VR6 idea as something different

@clifbradley 9 ай бұрын

Can't wait to see the progress

@rvltrstudio1484 9 ай бұрын

Thanks for addressing the goatee. I was worried you'd gone all hollywood on us.

@jasongoodwin9951 8 ай бұрын

John, I just stumbled across an article from The Drive by ROGER GARBOW that mentions the car at Ultra limousine.

@mikecook2788 9 ай бұрын

Love all your videos. I hope to see your channel grow, so we get more cool content!

@ChrisSaddlerSam 9 ай бұрын

Man... I was about to write "Don't do that again... u know what!!!" ...but then i waited till the end of the video! ;)

@Suhspencce 9 ай бұрын

I love this, I can watch these two stud muffins ALL DAY LONG

@Rubostli 7 ай бұрын

You can do a taller center tunnel, and make it like a 964/993 style center console, that would ad a lot of strenght

@DDE_ADDICT 9 ай бұрын

That thing is so weird thst it mega cool.

@Chrisgpop 9 ай бұрын

What up with the black beard? Is Grecian sponsoring the channel? Love the Porsche work.

@FicarraClassic 9 ай бұрын

You gotta watch to the end to find out.

@Chrisgpop 9 ай бұрын

Ah, well there you go. Thought you might have gotten divorced or something or having a mid-mid-life crisis. ;=O@@FicarraClassic

@filsmyth2 9 ай бұрын

am super-interested in the project, yet... so glad i have the option to watch at 2X speed

@robmanueb. 9 ай бұрын

VR6! For sure. Or a TDi :)

@HolgerKuhrts 9 ай бұрын

Why don`t you put a soft rear window with a zipper in it ? There was the 912 California which was both targa and cabrio, very cool and rare. As for a heavier motor, the original is already pretty demanding in corners or slippery conditions, another one would certainly not offer better handling.

@LonH77 9 ай бұрын

When you rebuild the floor and tunnel build the tunnel as structure. Do the roll bar in the center and at the feet run bars to the tunnel.

@firefighterps2 9 ай бұрын

Bondo. James Bondo.

@Atlas.X9X 9 ай бұрын

Great episode, I enjoyed this a lot.

@WiksGarage 8 ай бұрын

That clutch cable 🤣

@MidniteClimax 9 ай бұрын

What about some sort of tube frame type of skeleton welded in underneath the car?

@Zzus321 9 ай бұрын

There must have been a sale on bondo when it was built 😂

@CorradoAlley 9 ай бұрын

Make a cardboard template of the windows you need and take that to the junkyards

@AE86Matt 9 ай бұрын

Big brain comment here! Thanks for the tip!

@CorradoAlley 9 ай бұрын

@@AE86Matt I've only learned from my mistakes ie big pain not brain.

@FrodeAltink 9 ай бұрын

If you want a lightweight motor with a lot of potential. What about a Honda K20/24? It must be lighter than a LS?

@Pengajim 9 ай бұрын

I had soooo many goatee jokes. Then you had to go and explain it.

@GLxGL 9 ай бұрын

I am here to clean ze pool wif my zine eluven tarrrrrrrga. *strokes goatee*

@patricksaito9144 3 ай бұрын

Just about 100% sure this car was built at Sunrise Autobody which was in Englewood, NJ I was young. But witnessed it, I can most likely dig up some pics from the process. My father ( May he rest in peace) built this

@laitala09 9 ай бұрын

You should make it look like how it was when it was made

@dougshaw2944 9 ай бұрын

Making moves! Wow there's some janky work in there..

@jeffreyoldham55 9 ай бұрын

You are gonna clean up renting the Twin Targa limo out for PCA members weddings. 😁

@Onimalap 9 ай бұрын

Just for Men was my tought as soon as I switched video on. Next thing huge why blocky teeth and moving to florida. Ending explenation really made me laugh.

@AxelWonkardan 9 ай бұрын

The rear windows might be from a 2 door jetta from the era.

@jeffbear5317 9 ай бұрын

Maybe a bigger custom center console hiding a structure big enough to support the center of the car

@warmstrong5612 9 ай бұрын

"I'm not going through a mid-life crisis" he says standing in front of a twin targa limo project car.

@shafferjoe1962 9 ай бұрын

Which engine? That is a tough choice, being a Porsche most would want to keep it real with one. But at the same time the LS makes a lot of power cheap and three weight penalty is not bad. A turbo VR-6 would be awesome as well. I know you will make the right choice in the end. P.S. I like the look, be a rebel and keep it... BAHAHA Keep up the great work, love the videos. God bless you brother

@Biohazard667Productions 9 ай бұрын

so cool! man you should swap an Turbo volkswagen beetle 1.6 in that xD keep it aircooled yeah

@Aruges01 9 ай бұрын

And now I can't wait for him to start dropping "Where did you learn your trade?" into future videos.

@blitzpixgarage3319 9 ай бұрын

Great Video! I thought the 928's look cool, did I miss a detailed video on them? Did John colour his beard and hair?...all answered in this video...now I'm happy! Cheers

@ArtVandelayOfficial 9 ай бұрын

The guy who built that also did the stretch Maserati from Running Man

@goose4150 9 ай бұрын

Probably T-topping it might help rigidity a lil bit. I really dig the R32 engine

@GreenJeep1998 9 ай бұрын

Have you considered a cage like what is in the MORRVair?

@jasondavis8741 9 ай бұрын

Good, for a moment I thought you were going the way of Thesious' Ship. Good to know you're looking to correct and improve on what it was. Is. Will be, Is

@quentinstacy35 9 ай бұрын

Voting for aircooled six

@DowneastBeast 7 ай бұрын

I don't have a spare 964 motor, but if you want to throw all logic to the wind and take on a massive challenge, I DO have a spare Vortec 8100 (4th gen 496)

@coreyurban1761 9 ай бұрын

I had a dream about this thing earlier no lie lmao

@pedenconceptz 9 ай бұрын

Do you have 2.7 Audi bi turbo engines in America? Would have been in an Audi allroad or audi s4. Those share a gearbox bolt pattern with Porsche boxster 2.5 or 2.7. I’ve seen one fitted in a 996 and presumably it will bolt to that gearbox also which might suit your application. Would it fit an earlier box…? I don’t know.

@jenibond 9 ай бұрын

I know it would be mega amounts of work but you got twin engined something like a 2lt out of Golf/jetter/TT, You can't have twin car with only one engine !!! and you get 2 out junkyard and still save 30k for the fab work compared to air cooled 911 engine !

@skendler 9 ай бұрын

This is an excellently insane idea. AWD twin (turbo?) engine twin targa 911.

@__KNOX__ 4 ай бұрын

Man what I would do to have a cup of coffee with John. I too am an Italian American last name Vitto. Really though just to pick his brain would be priceless

@bradhartong907 9 ай бұрын

How big and heavy is the F150 2.7 liter twin turbo?

@briankearn6991 9 ай бұрын

Put it on a Taycan turbo platform. Plenty of room for all the batteries.

@frestkd 7 ай бұрын

Jimmy Oaks is putting Maserati V8 in a 70s 911 ...

@hrspers 7 ай бұрын

958.2 GTS motor would be perfect

@yesimhuman 9 ай бұрын

Brushed stainless instead of polished on the middle roof section would be even cooler, imo.

@New_Jax_City 9 ай бұрын

John that car will never look better than how it was originally built. Put the wheels back on it. Put a porsche motor in it. Dont be HOOVIE and put an LS in it. Cmon!

@Shrrby 9 ай бұрын

It might be sacrilege... But would a VR6 be worth a shot to put in the back? Could fit.. It'd be narrower than the 928! And shorter than an LS. Edit: Nevermind, its on the list! Glad I wasn't the only one.