This video will show you how to properly apply Fiebing's Resolene. fiebing.com/pr...
Пікірлер: 40
@what7648510 ай бұрын
My first attempt using Resolene turned out beautiful. I use a damp sponge then put more resoelene on there than I would need. Really quickly rubbed it all over. Then with switched to dry dressing sponge dabbed it all over until it looked nice and even
@robertobulgheroni45254 ай бұрын
Good evening, I have a question, is it possible to apply oils, balms, creams over these finishes to nourish the leather or do they form a waterproof layer that prevents absorption? Thanks for the reply and thanks for the interesting video!
@FiebingCompany4 ай бұрын
Conditioners will not pass through Resolene. Conditioners do pass through Tan-Kote.
@davidturlington19588 ай бұрын
can I use this on leather upholstery? If so, any tips? First time user here.
@JnJShiffler4 ай бұрын
Tips for finish not ending up so shiny? (for leather armor). I was told to mix 50/50 with distilled water. Did this for our pirate baldrics and did I think 2 coats and this past memorial day at the Philly Ren Fair it was raining some and me and my wife's baldrics got water spots on our green dyed leather?????
@FiebingCompany4 ай бұрын
Full strength Resolene will resist water. As you dilute it, it will not protect as well. A 20% dilution is what we typically recommend for some gloss reduction
@JnJShiffler4 ай бұрын
@@FiebingCompany How long before a second coat can be applied (full strength). Also, might there be a safe way to dull the finish while not compromising the protection keeping it full strenght?
@jackdelane Жыл бұрын
Does colored resolene stain the leather as it applies the finish?
@BlackCamaro728 Жыл бұрын
Will this seal and protect an antique finish better than Tan-Kote? My antique finishes keep turning a chalky white over time when sealed with tan-kote.
@FiebingCompany Жыл бұрын
yes, Resolene is a stronger finish
@lindagatchell80797 ай бұрын
how do i clean this out of my brush if dried already? I tried soap and water didnt work.
@FiebingCompany7 ай бұрын
Soap and water works well before Resolene has dried. After is has dried, use a solvent like Fiebing's Deglazer
@BBgunX222 жыл бұрын
Would I add this before the leather balm with Atom wax or after? I just started dyeing my own leather so I’m trying to find a good moisturizing agent and then a good finish to protect the leather from the elements. I bought the leather balm and the resolene but I’m not sure what order I’d use them in.
@cchase43142 жыл бұрын
You would use Leather Balm before Resolene, however Leather Balm is different than Leather Balm with Atom Wax. The names make it confusing. Leather Balm is a conditioner. Leather Balm with atom Wax is a finish.
@BBgunX222 жыл бұрын
@@cchase4314 So Resolene and Leather Balm with Atom Wax are both finishes? I wouldn’t use both? Which is better for giving a glossier shine?
@cchase43142 жыл бұрын
@@BBgunX22 They are both finishes. Neither is "better", just different. Resolene will be water resistant and glossier, but conditioners don't pass through it.
@BBgunX222 жыл бұрын
@@cchase4314 so after applying the leather dye what should I use to recondition the leather before the Resolene?
@cchase43142 жыл бұрын
@@BBgunX22 neatsfoot oil is a good choice
@cobblerq12 жыл бұрын
Can this be used directly with an airbrush or do I have to thin it out?
@cchase43142 жыл бұрын
It depends on your airbrush. It is often used in both ways. You can thin Resolene up to 20% with water to make it flow better and to eliminate streaking.
@JnJShiffler4 ай бұрын
@@cchase4314 my bottle says up to 30% thinned?
@tommytitmouse2 жыл бұрын
I was told to mix it 50/50 with water to use it.?????
@cchase43142 жыл бұрын
Mixing with water will make it easier to spread smoothly, however it will reduce the product's strength. Using a slightly damp sponge will also work well without decreasing it's effectiveness as much. If the product starts to streak, add a little water to your sponge and go over the spot again.
@tommytitmouse2 жыл бұрын
@@cchase4314 thanks, I`ll try that.
@deaveedis62953 жыл бұрын
Soo.. no need to add water?
@JHall-jo9rm Жыл бұрын
I used NO water, nor a damp sponge. I used a dry, 4" mini foam paint roller to work it in (in swirls) and then to spread it evenly (left to right across the top) so as not to leave any marks. Worked perfectly.
@MrFreeGman4 ай бұрын
I find that if you don't dilute it, streaking and bubbles become a problem.
@bboy3lmo2 жыл бұрын
Using sheep wool to buff the leather that has dried paint/dye on. Would it scratch some paint off?
@marty019573 жыл бұрын
Cool, Thanks!
@halloooo1duuuuu Жыл бұрын
I read that you shouldn't go back and forth with the resolene.
@Ulfie_ Жыл бұрын
I know it's a late reply but from what I've experienced using resolene, back and forth leaves streaks on the leater but buffing in a circular motion doesn't so I'd avoid back and forth if you get the same issue as me. It's also worth noting that i use a sponge for application.
@emazens Жыл бұрын
@IridescentBlue At the end when it dries it feels sticky is that where we need to buff off just like at the end of the video he buffs it off or that's optional and the stickiness goes away with time ?
@KurdLeatherzana3 жыл бұрын
Nice
@shrewdnewt Жыл бұрын
Try not to do your project in sections. Its tuff to get even