Fiesta ST: Crossmember Brace Install

Quick impromptu install of the TB Performance Crossmember Brace on a 2015 Ford Fiesta ST (ST2 USDM).
Tools:
Jack & jack stands
13mm Socket
Impact
Blue Loctite (optional)
Why chassis bracing?
tbarmy.tbperfo...
Link to Crossmember Brace.
www.tbperforma...
Link to Whoosh Exhaust hangers:
whoosh-motorsp...
Link to AWR Rear Motor Mount:
store.awrracin...

[@awrracing_]

#TEAMAWR

[@sergiogomez2021]

do you know if it works in conjunction with the torque gusset bar? (also from tb performance) I'm planning to get both

[@ryeguy88]

Yes. I would check with Daniel Check to confirm if you like.

[@ryeguy88]

JuSt checked the TB Facebook page. They ARE separate units and can both be installed.

[@filmboy18]

Why no torqueing down? 48nm all four. You realise if one bolt comes loose it will be doing literally nothing.

[@ryeguy88]

Missed this one, it was torqued eventually afterwards.

[@stacytrevino7516]

So how does it feel over stock?

[@ryeguy88]

It was posted a little quick in the end of the video but the car turns in much more flat. I feel the lack of chassis flex is noticeable for sure.you feel like your driving a single solid piece chassis and not two pieces connect with tape.

[@stacytrevino7516]

@@ryeguy88 thanks ,sorry I didn't make it to the end of the video.

[@ryeguy88]

@@stacytrevino7516 haha. that makes me sad ;)

[@tonydavis8078]

Man, buy yourself some bigger axle stands rather than struggling with hardly any room to move 😁