In this episode everybody I go over base tunes for certain carburetors and I also go over my tuning techniques. I try to capture rich in Lynn conditions from my previous videos a well.
Пікірлер: 37
@charlesbartlebaugh3 ай бұрын
Thanks for the video i know its older but it deff helps im new to this tuning shit so all videos help n with a expensive motor i don't want to mess it up
@Meyers2strokeRcgarage3 ай бұрын
No problem, bro👍🏼 thanks for stopping by and checking it out💯
@charlesbartlebaugh3 ай бұрын
Dude I can get this thing to start at first till I mess with it it just seems to be getting to much gas n flooding out it's a new Taylor 35
@Meyers2strokeRcgarage3 ай бұрын
@@charlesbartlebaugh what carb?
@renedoppenberg47622 жыл бұрын
again a very good vid and an outstanding explanation on how to tune your motor 👍👍 I broke my first engine with that and cost me al lot of money to replace, but i've gone from a 29cc to a 32 cc and its running like grazy !! Wish i had those tips at forehand, thanx bro and keep the great vid's comming
@Meyers2strokeRcgarage2 жыл бұрын
Thanks my brother 👍🏼👍🏼👍🏼 i’ve decided in the off-season when there’s snow on the ground anyways and I can’t rip to do more informative videos for the newer people in the hobby
@JenniferHenberger2 жыл бұрын
Thanks...any and all tips are really appreciated
@Meyers2strokeRcgarage2 жыл бұрын
No problem 😉
@peteschannel508 Жыл бұрын
I installed a velocity stack on my 36cc and it threw my tune off big time. I had a modified stock filter before but it was perfect running and sending rooster tails. I need to try to dial in the tune with the stack now, if I can't get great results I'm going back to the stock set up.
@g.bjumpsbashing30622 жыл бұрын
Very nice job champ..keep going👑
@Meyers2strokeRcgarage2 жыл бұрын
Thanks man I appreciate it👍🏼👍🏼👍🏼
@Pete-Rc Жыл бұрын
Good job bro.
@Meyers2strokeRcgarage Жыл бұрын
Thanks bro👍🏼💪🏼👊🏼
@Notoriious9062 жыл бұрын
Subscribed! Keep it up brother
@Meyers2strokeRcgarage2 жыл бұрын
Thanks for the support bro and I will definitely keep it up 👍🏼
@kyapojo2851 Жыл бұрын
Love the video and the Chanel found it off this video and watched more. I got a taylor 71cc supreme I just finished breaking in and I noticed on top end it kinda reminds me of a tire coming apart and exploding the foam. I haven't run it after that trying to look up tuning videos because it's my 1st 1/5 and I'm just nervous on tuning I guess. I have no issues with nitro tuning. But you saying about the blubber definitely explains how it is acting, it isn't cutting out so I'm assuming it's rich on the top end. Low end out the hole is perfect.
@Meyers2strokeRcgarage Жыл бұрын
Thanks brother I’m glad you like it!!! I’m getting ready to bump my 40GT to a 71 😉
@kyapojo2851 Жыл бұрын
@@Meyers2strokeRcgarage I will have to say you will love it, insane amount of power and torque. Carries my vekta.5 like it's nothing
@Meyers2strokeRcgarage Жыл бұрын
@@kyapojo2851 awesome bro!!!
@alanflatau16852 жыл бұрын
Thank you brother l suck tuning, I TURN THE NEEDLES TO MUCH HELL THANKS GOOD BASE LINE ON TUNING GOD BLESS YOU AND FAMILY STILL HAVE SNOW ON THE GROUND YAKIMA,WA TWO WEEKS AND GROWING SPRING WILL COME??
@Meyers2strokeRcgarage2 жыл бұрын
No problem brother 😉 we just got 8 more inches yesterday 😒😞
@2strokejunkie11 ай бұрын
This is some really good info. How long have you been doing 1/5 scale ?
@Meyers2strokeRcgarage11 ай бұрын
I got into the hobby in 2018 so about five years or so👍🏼
@2strokejunkie11 ай бұрын
@@Meyers2strokeRcgarage that’s pretty cool !
@legit_187ttv63 ай бұрын
Had a question about a Rampage if u don't mind someone suggested to try u
@Meyers2strokeRcgarage3 ай бұрын
Sure hit me up 🤙🏼
@legit_187ttv63 ай бұрын
@@Meyers2strokeRcgarage mine is pretty much new I did long break in 1st one on stand where it sounded great n had smoke coming from exhaust. During stand break-in coupler broke which they happily sent another but while I waited I grabbed some off Amazon n got next day. Put it on n seemed ok but n now there is ridiculous pressure in tank n I can't get no smoke no matter how rich I make it. They told me take off bubble thing on gas cap which I did but that just made a ridiculous mess all over the truck from gas spilling out. Then I felt bolts backed out muffler some cause it was loose n that's as far as I saw smoke. Tightened them up but I still see no smoke n the pressure in tank n bulb is unbelievable, like a quarter of tank is bubbles. Idk if when coupler broke it caused a gasket or something to break as well but definitely not the same. I ran a couple day's ago 5th tank break-in done ready to go but pressure n lack of smoke seem to be worse. I always reset needles to factory before running then go from there depending on weather. Ratio 20:1 from break-in to now as they suggested but something is definitely not right. Any help or thoughts would be much appreciated ty
@Meyers2strokeRcgarage3 ай бұрын
You have pressure or vacuum in the tank? It should not have either one. That’s why there is no smoke 💨 there is a restriction in your tank ventilation. What I did was make that tiny pinhole in the fuel tank cap and the little rubber piece inside and drove an O-ring pic through it to open it up. That took care of my issue. As the engine uses fuel, the tank needs to be properly vented so it does not go into a vacuum. I don’t know how you would even get pressure in there 🤔
@legit_187ttv63 ай бұрын
@@Meyers2strokeRcgarage yes sir that's what I'm saying I don't understand. On the stand for 1st tank break-in it was great factory settings n nice smoke. When that coupler broke n I put new one on it has never been the same. No smoke n pressure in tank just outrageous its all bubbles or just shoots it all over body lol. I actually drilled a slightly bigger hole in cap as directed but it has not relieved any of the pressure
@Meyers2strokeRcgarage3 ай бұрын
OK, you do not have a ventilation restriction. There’s something else going on. Take the carburetor off and try another spare one if you have one otherwise you will have to take the carburetor on it apart and see what’s going on with your pulse for your diaphragm. It almost sounds like you have something going on with your pulse in your diaphragm and it’s feeding back into your tank. 👍🏼
@HamidKhan-xx4nt7 ай бұрын
How to service your rc carburetor
@Joes5thscalercandguns2 жыл бұрын
Nice vid bro when is your diablo 88 coming?
@Meyers2strokeRcgarage2 жыл бұрын
There has been a change of plans on my channel and I’m going for the Taylor 35 first😉 after that I’m going to get the Diablo 88
@Joes5thscalercandguns2 жыл бұрын
@@Meyers2strokeRcgarage that's cool brother looking forward to that unboxing vid and break in vid