FILAMENT FUSION FUN! Save Scraps with Sunlu FC01

Рет қаралды 6,372

Күн бұрын

Пікірлер: 46

@marlonmartins82 4 ай бұрын

Thank you for testing properly. i see a lot of reviewers don't read the manual, just use improperly, and complain about the product.

@JDLMCLOW 4 ай бұрын

It's like a fusion splicer for fiber optic cables....but for filament, very cool!!👍

@jeanmarcovidal5920 4 ай бұрын

This tool will be a must among 3d printing enthusiasts. I don't doubt some 3d printers will include a modified version of it in the future. Thanks Bryan!

@kaytrim 4 ай бұрын

Got my order in early. Just received an email from them and any new orders will be shipped in early Oct. This seams to be a popular piece of equipment. Can't wait to receive mine.

@cmtravis13 4 ай бұрын

Hallelujah, now I have something to take care of all those sample filament from all those RepRap festivals.

@Vormulac1 4 ай бұрын

I preordered one of these, thanks for the video, it looks pretty good! :)

@danielmcmullen9633 4 ай бұрын

Pcl can be used in 3d pens, Polycaprolactone (PCL) is a high quality biodegradable plastic derived from petrochemical feedstock, it is compostable under home composting conditions.

@The-Grateful-Hippie 4 ай бұрын

This is going to be so helpful!! I might actually get my heat break replaced so I can start printing again.

@3dmazter 4 ай бұрын

I misread and read "I might actualy get my HEART BREAK replaced" 😅

@The-Grateful-Hippie 4 ай бұрын

@@3dmazter 🤣

@lindeleasley 4 ай бұрын

Very nice, I have pre-ordered one. Thanks!

@KAKAFU 4 ай бұрын

I'll wait when the new version don't need the sleeve .. you know someone will make one ..lol BEEERS!! 🍻

@EcoHamletsUK 4 ай бұрын

One of the other reviewers (forgotten who) reused a sleeve a number of times. It looks like it just slides off. For joining lots of short lengths this should be fine, and will make the 200 supplied last a lot longer, but of course it's not practical when joining long lengths. For the amount of joining I'll be doing, I think the supplied sleeves should last longer than the tool!

@FuriousGriffin 4 ай бұрын

Thanks Brian, was wondering how good it would work.

@ragingjew8345 4 ай бұрын

I use surgical tubing and a bic lighter. Works just as well.

@hanslain9729 4 ай бұрын

Great demo! Nice and concise.

@getbent57 4 ай бұрын

Very cool device. Will have to keep an eye on this to see what the Canadian price will be.

@Offcut55 4 ай бұрын

pre ordered mine some time back now. Cannot wait as the Wife is nagging me to get rid of all my nearly empty rolls ;)

@stuartalexander3 4 ай бұрын

Ordered mine at the beginning of July now told delivery to the UK mid to late October.

@StewKeto3DPrinting 4 ай бұрын

Excellent. Proper ratio of pun to content! You can cut the 2 pieces of filament together to guarantee that the angles will match.

@BV3D 4 ай бұрын

Hm. Good point on cutting both at the same time. I think for those of us used to cutting 45s on filament, we're pretty consistent on the cut. If you're new at it, then like you say, keeping the two filaments parallel while cutting an angle across both at the same time would ensure a match. Thanks!

@StewKeto3DPrinting 4 ай бұрын

@@BV3D Some may call it lazy, but I prefer to make 1 cut to 2, LOL.

@ronm6585 4 ай бұрын

Thanks BV3D. Very cool.

@wimnanoe5887 4 ай бұрын

Thanks Bryan

@TheGreaseySpoon 4 ай бұрын

Ordered mine last week but got to wait until November for the first shipment to the UK

@markh6065 4 ай бұрын

Due to an accident with a bottle of wine, I have one of these on pre-order due to turn up in a month or two. It's nice to see that they work. I wonder how much those sleeves will cost?

@JamsterJules 4 ай бұрын

Try buying in the uk. The site calculates the shipping at £666!

@jasonlambo7896 4 ай бұрын

Frankenfilament!!! Love it

@dedogster 4 ай бұрын

I just ordered one,and got a notice that it will be shipping mid September to Canada. Great review! What is the filiment winder you are using? Cheers!

@3dtexan890 4 ай бұрын

They keep changing the shipping timeline. It does look like a good product.

@Marcus_Caius 4 ай бұрын

The only use of that device to me would be on a 3D Pen. With AMS and MMU these days you don't end up with alm ost empty spool if you plan wisely.

@OldCurmudgeon3DP 4 ай бұрын

LOL. Most of my "spare" usb adapters are being used by other devices that didn't include one because I "should have one laying around." 🤡

@mcorrade 4 ай бұрын

ok Bryan I had to finally get. Oh and I used your like man ;-}

@jeffreys-vu6gd 4 ай бұрын

I'm so bummed. I just ordered pre-ordered mine and it is not due until October.

@KevinGroninga3D 4 ай бұрын

You really should look into the Slunaz FF1R instead of this ‘toy’. The FF1R doesn’t require you to waste a section of PTFE tube for each joint, it runs to higher temps so you can join high-temp materials like ABS or PET (I didn’t say PETG), and it has it own spooler to boot. It puts this small unit to shame.

@EcoHamletsUK 4 ай бұрын

It's rather more expensive! For the amount of filament I'll need to join, the Sunlu is a bit pricy, but I've ordered one. I couldn't justify paying any more for it.

@KevinGroninga3D 4 ай бұрын

@@EcoHamletsUK I make a lot of PET filament from recycled plastic bottles, and as such the Slunaz FF1R has been an invaluable tool in my arsenal of small machines to make my job SO much easier! And the fact that I don’t have to place a small bit of PTFE, cut it off and throw it away is also another big factor. And on top of that, the Slunaz FF1R has its own spooler. But yeah, if you’re just a hobbyist and only need to join a few scraps together from time to time, I could see where the FF1R is cost prohibitive.

@Thomllama 4 ай бұрын

Dad jokes powered by coffee filtered water! 😂

@mepanza 4 ай бұрын

Hi I like a lot the videos and contents but the link for the product does not have any version available to sale. For sure that is not your fault I know, but I wish asap they re stock the item!!!