great tutorial,thanks.ill be doing this on both my 2020 and my 2022 model tomorrow morning
@GarryPurcell2 жыл бұрын
Good luck!
@daup7074 жыл бұрын
2nd time to watch this, i really find this video informative esp. the gimbal calibration. good job mate!
@GarryPurcell4 жыл бұрын
Glad it was helpful! P.S.If you haven't seen the next video, I got rid of the Jello, and fixed the horizon drift.
@danieltaormina14724 жыл бұрын
Handled the sun very well
@GarryPurcell4 жыл бұрын
Its not bad, but you will get some lens flair at certain angles.
@AdrianMateoDrones4 жыл бұрын
Wow very impressive video brother Garry. Nicely done and great JOB Sir. Thanks so much for sharing this GREAT video with us. The Fimi X8 SE 2020 version is an awesome drone. I just got mines yesterday and i am loving it. I just posted my unboxing video of it on my channel. I have been subscribed to your channel for a while now. You have a Big Fan and a Big Supporter here. Let’s help and support one another. You have my full support 100% Sir. Have a great day captain. Thanks for all you do and please keep flying.
@GarryPurcell4 жыл бұрын
Thank you for your kind words, I'm sure you will like flying the X8, it handle beautifully.
@AdrianMateoDrones4 жыл бұрын
Garry Purcell You are welcome my friend. And yes i do love ❤️ flying my Fimi x8 se 2020 version. It flies and handles amazingly great. Many more videos coming soon. Thanks for all you do and please keep flying.
@MrSango1234 жыл бұрын
garry please keep the vids of this drone coming you have that down to earth aussie way of explaining things
@GarryPurcell4 жыл бұрын
I'm looking at changing a few settings, balancing the propellers, and making another video to see if the results improve. One things for sure, I won't be filming in near freezing weather again. Dam near froze my XXXXX Off!!! hahaha
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@johnambrose40934 жыл бұрын
Garry, did you purchase your fimi as a preorder from banggood? If so, how long did it take for you to get your drone? I am in the US and am on my 3rd month and wondering if I should just wait or cancel out. Anyway, great videos on this drone. I wanted a heads up on what to expect and your unboxing and 1st flight videos cleared up alot. Good job and thanks alot, mate.
@GarryPurcell4 жыл бұрын
Its hard to advise you which is the best way to go with your order. I'm seeing mixed results. I have seen some forum posts over the last few days, saying that the quad has finally been shipped, and others saying, they are still waiting. I bought mine from Banggood China. (It was one of the first they sent out.) I didn't order from the local Banggood Australia, as I knew there would be a long waiting time. (Its "Still" not showing in stock) May 12, 2020 12:13 Your parcel has been delivered according to delivery instructions. May 12, 2020 10:16 Your parcel is with a Fastway courier and ready for delivery. May 11, 2020 12:53 Your parcel is in transit May 11, 2020 12:52 Your parcel has been picked up by one of our couriers. May 07, 2020 13:59 Your shipping information has been submitted to Aramex (formerly Fastway Couriers). May 07, 2020 13:53 Your parcel is being sorted for delivery. We’ll update you when your parcel is on its way to the delivery destination. Apr 20, 2020 22:05 Package has been sterilized and shipped out. Apr 20, 2020 10:45 Our warehouse has started packing your items. Apr 14, 2020 02:10 Order submit.
@EspenJohan4 жыл бұрын
Really nice video👍
@GarryPurcell4 жыл бұрын
I appreciate your comment. Thank you.
@EspenJohan4 жыл бұрын
@@GarryPurcell so what do you think of the 2020 model is it any better than the 2018/19 model?.
@GarryPurcell4 жыл бұрын
I don't own either a 2018 or 2019 X8. So I can't comment on actual performance, comparing them to the 2020 Edition. Maybe someone else will answer for you.
@frostythecaseman4 жыл бұрын
Would you recommend the fimi x8 se 2020?
@GarryPurcell4 жыл бұрын
I have already replied to you on one of my other videos. However, in case you missed it, I have answered below. For the Price, you get a very good quad. Its not without its faults though. Also In this price range, you have the Mavic Mini. (I own the mini also) The mini can't handle the wind like the heavier Fimi X8, but it does produce some very nice video footage, and has a few extra camera settings.
@frostythecaseman4 жыл бұрын
@@GarryPurcell I commented on a bunch of fimi reviews. I did not realize two were the same person. One of my worries is that i cant buy the drone in America. I'm worried it might be poor quality and because it's not from America customer support would be very difficult to deal with. Comparing specs the fimi sounds better than the mavic mini but I just don't know if I trust the brand. Would you recommend the mavic mini or the fimi?
@GarryPurcell4 жыл бұрын
I own a Mavic Mini myself. Its a good quad, but is lacking when it comes to its ability to handle the wind. The Fimi X8 is quite an amazing drone for its price, and can handle strong winds easily.
@MrJcnheco4 жыл бұрын
Nice video. That happened to the 7.10 minute? There was a gelatin effect there.
@GarryPurcell4 жыл бұрын
The quad was decelerating, getting ready to land. I will make another video in warmer conditions, and see if it does the same thing.
@GarryPurcell4 жыл бұрын
New Video is now uploaded 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@hobbyzone24 жыл бұрын
Great video! Seems like crooked horizon & jello effects are here to stay. Seems to me Fimi just swapped out for cheaper components where they can. Obviously known problems are not fixed. Hopefully they enhanced the arms for sports mode flight but I highly doubted
@SN-10064 жыл бұрын
The rear arms are made of a different poly. You can see this very clearly in a closeup photo
@hobbyzone24 жыл бұрын
@@SN-1006 I think it has more to do with their flight algorithms that's causing breakage. But hey quick fix if they strengthen it but I have yet to see it
@GarryPurcell4 жыл бұрын
The Horizon drift has me a bit perplexed, as I did do a horizontal gimbal calibration, before I went for its first flight. It was rather a cold morning, around 4 degrees, and frost on the ground, so maybe the gimbal gain is set too high at 100 percent stock. Or it could be the propellers are not balanced properly. I'm going to make another video to see if I can sort out some of the initial problems. The arms are indeed made from a different material.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@leon_abi31434 жыл бұрын
Keep flying and make videos, i have faith in this 2020 version, the software is still limited and little polished but i think it will surprise us. For the next video, put the bit rate at the maximum which i think will make a lot of difference
@GarryPurcell4 жыл бұрын
The Bitrate was deliberately set low, due to the speed of the SD Card I used. I now have a Very Fast Card, it's just arrived.🙂 SanDisk Extreme Pro MicroSDXC UHS-II card 275 Read 100 Write So it should be up to scratch when recording at the maximum bitrate.
@leon_abi31434 жыл бұрын
Garry Purcell Great ! I Will buy that one too !
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@karlberry1234 жыл бұрын
Can confirm that after getting the email from banggood es (Spain) saying that the order was delayed due to spring holiday (February after ordering In April). The order said a 2 week delay on may 15th. Of course this 2 week delay didn't really exist and they was just delaying my order. I got in touch with banggood today and they have moved the Spain orders to a minimum of July 10th shipping so I have cancelled and will order again once things are a bit clearer.
@GarryPurcell4 жыл бұрын
Its hard to say how long the wait will be. The Fimi X8 seems to be very popular.
@karlberry1234 жыл бұрын
@@GarryPurcell yeah I ordered very early in April. I would assume the coronavirus has delayed deliverys to Spain. I'll order a new one when they are in stock again or maybe next time
@zacharycole30543 жыл бұрын
Hey Garry, great video. I flew mine for the first time today and the video seems to have some artifact if going on or a stutter effect. Like the camera is adjusting to the light. Is there a setting that would ease that or is it due to it being cloudy?
@GarryPurcell3 жыл бұрын
Set your ISO to 100 AND... Make sure you have a FAST SD Card inserted.
@zacharycole30543 жыл бұрын
@@GarryPurcell thank you very much Garry!!
@MrSango1234 жыл бұрын
likes the vid garry but was it shot in 4k?
@GarryPurcell4 жыл бұрын
Yes, it was shot in 4k 25fps with Low Bitrate My SD Card could not handle a faster speed. I know have a much faster card. SanDisk Extreme Pro MicroSDXC UHS-II card 275 Read 100 Write
@johnog83584 жыл бұрын
Do you recommend this as a first drone? Or should I cancel the pre order and get a DJI mavric mini? I don't need faults I'd be nervous with out them...
@GarryPurcell4 жыл бұрын
Its a good quad for the price The 2k footage is not bad I had it out in wind.gust from 0 to 20kph at ground level. I flew it quite low to test the video footage, and it held its ground admirably, and produced some really nice footage. I should have another video up up next week, showing smooth cinematic footage.
@johnog83584 жыл бұрын
@@GarryPurcellthanks , great look forward to the future videos. It seems like serious bang for your buck. But to be honest I'm after safe reliable and good quality. Last thing I want is it dropping out of the sky for no reason. I also in general like to support the less known brands - I like competition in the consumer market to drive better technology and prices , this is why I am trying to avoid DJI.
@GarryPurcell4 жыл бұрын
Nothing Wrong with DJI products, I own two of them. But my GoTo at the moment.... is the Fimi X8. I tend to not worry as much, its quite powerful and handles breezes nicely. P.S. Each time I play with my Mavic Mini, I'm worried it might not come back, due to a bit of wind popping up unexpectedly.🙂 So I'm very picky as to wind conditions using it.
@sangaala4 жыл бұрын
Thank you for your next video! Good job! What is the temperature over there? It seems pretty cold. Do you think issues like jello and not focus video is because of that?
@GarryPurcell4 жыл бұрын
The camera settings were straight out of the box. (apart from the gimbal calibration) The temperature was low 4 degrees Celsius, so not ideal for flying drones. I will try to get more footage at a later date, but with the Covid-19 lock-down, its not so easy to travel far from where you live. (Big fines imposed if your caught without a valid reason.) That park I used in the video, is very popular later in the day, so it basically becomes a no-fly zone.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@shapethefuturetech60054 жыл бұрын
You will find how good the dynamic range of the camera when you face the sun
@GarryPurcell4 жыл бұрын
True, and I think it passed that test quite well.
@MrSango1233 жыл бұрын
hi garry in one of your fimi videos you mentioned a mini usb cable that works both ways like a modern c usb can you tell me name of it again please
@Foxtrot25004 жыл бұрын
GREAT info!!!
@GarryPurcell4 жыл бұрын
Thank You. I have another video with the Jello and Horizon drift fixed. kzbin.info/www/bejne/sHzcgmOoo8iLasU
@Foxtrot25004 жыл бұрын
Garry Purcell I also watched it. Thx
@MAVROS174 жыл бұрын
Totaly jelly effect Problem. Had the same level of problem in my first flights, with 2018. after 5-6 flights, the gimbal was acting like it was headbanging. The footage was useless. I sent it back to FImi and i got a replacement drone.Its a matter of luck to get a good set of fimi product(a drone with no problem in gimbal or camera or blocked motor after some hours of flights). I m afraid that our gimbal is one of the problematics (hope not, maybe its getting jelly caus of the low temps (thats its not good for a gimbal, but its happening almost always in fimi x8 gimbal)). I enjoy my fimi X8 2018, but i m afraid that i wouldnt buy a fimi product again. Good luck with your X8
@GarryPurcell4 жыл бұрын
Thank you for sharing your experience. Its greatly appreciated. I'll be making another video, and doing some tuning adjustments to see if I can sort this jello problem out.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@gauravexplores24014 жыл бұрын
Nice video! Was it too windy while you were flying??
@GarryPurcell4 жыл бұрын
Wind speed was low, around 11kph, but quite cold, 4 degrees celsius.
@gauravexplores24014 жыл бұрын
@@GarryPurcell observed some shaking! But overall in it produced good video. I am sure this would be a enjoyable quad.
@GarryPurcell4 жыл бұрын
@@gauravexplores2401 Its hard to know at this stage, I need to get out to shoot some footage on a warm day to compare. I don't believe in editing out footage to make the quad appear better than it actually is.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@GraemeSymes4 жыл бұрын
Don't like the power adaptor. Can you just change the mains lead for an AU one ?
@GarryPurcell4 жыл бұрын
Yes. I also did a short video on just that topic. kzbin.info/www/bejne/h4aQqZiXlNV4eq8 One of the viewers named the actual plug type in its comments section.
@dragonpower9744 жыл бұрын
Hi, I didn't see those lines appeared on the screen when I tried to do horizontal gimbal calibration. How did you do to get those lines shown?
@hdi4eva-castlesbydrone5314 жыл бұрын
Thanks for sharing your first impressions. 👍👍 Try to lower the gimbal gain to get rid of jello at low temperatures. Had this problem with my frist white Fimi X8. My novel Black one is ace in every respect, not showing any problems at all in this respect. Still waiting for my 2020 version, though.
@GarryPurcell4 жыл бұрын
Thank You. You've read my mind. List of things to do. Dropping the gimbal gain down to 50 percent or lower. Balance the propellers. Use Flight mode on my phone, in case its sending superfluous signals to the quad. I'll be making another video showing the results, good or bad.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@hdi4eva-castlesbydrone5314 жыл бұрын
@@GarryPurcell Yeah, it is kind of normal that we have to try many things, before we get a satisfying output, especially in case of a lower budget drone. Many people are just too impatient. And of course some flaws may remain, but in the end you get a solid video quality for "only" about 300 Euro. That's why I ordered the 2020 version as a spare drone in case something happens to my beloved Black Fimi.
@GarryPurcell4 жыл бұрын
When you get your X8 2020, I think you'll be pleasantly surprised as to just how good it actually performs. P.S. I own two DJI's myself.
@davidandrews69154 жыл бұрын
I am interested in the fimi 2020 .is it worth the investment also looking at the yuneec mantis g or the hubsan zino 2. Any advice would be appreciated.
@GarryPurcell4 жыл бұрын
Don't forget the Mavic Mini is also in this price range. I took the quad out in some windy weather (0-20kph gusts at ground level), it performed quite well. P.S. 2k 50fps Footage in F-Log colour graded is not too bad. I'm still testing the Fimi, so I hope to have some more videos uploaded. (My Computer is playing up, and I have a replacement one on order, it should be available next week, and I will be able to compile some footage.) P.S. I also own Mavic Mini.
@os57344 жыл бұрын
3:40 / 5:33 / 7:14 same problem .. 😩 Something frustrating to me.
@GarryPurcell4 жыл бұрын
Its something I'm looking into, and I will be making another video using different settings, to see if I can fix the initial jello problem.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@grahamwilson27484 жыл бұрын
Nice video thanks 👍🏼 Just received mine and first flight I started the drone by pulling both sticks down, I updated the firmware and the app today and that option is gone somehow, and had to use auto take off ,anyone else had this? Ps my return to home is 10 feet off 😕
@GarryPurcell4 жыл бұрын
The sticks, must be in the provided indent slots, to work for takeoff I'd suggest you re-install the firmware, and do a full calibration.
@driewiel4 жыл бұрын
Spooky music. THE DAY OF THE FIMI FROM OUTER SPACE. WATCH THE SKIES!
@GarryPurcell4 жыл бұрын
Haha Thanks for commenting. My next fimi video will be showing smooth cinematic footage using f-log and colour grading. (BIG improvement)
@driewiel4 жыл бұрын
@@GarryPurcell My next video will hopefully be my new Fimi A3 following me. No idea why it didn't work last time. Could it be because I'm old and ugly?
@GarryPurcell4 жыл бұрын
Make certain you have the A3 controller set to follow itself.
@driewiel4 жыл бұрын
@@GarryPurcell It always does. There is no other setting. I got it working now. And it works great.
@abdulkarimkalalibachabi52754 жыл бұрын
hi, Does it have obstacle avoidance sensors ?
@GarryPurcell4 жыл бұрын
No avoidance system.
@patrykisdiving55744 жыл бұрын
How long is the flight time in a normal mode?
@GarryPurcell4 жыл бұрын
I have not tested that yet.
@patrykisdiving55744 жыл бұрын
Ok. Can you update it here once you've tested it?
@GarryPurcell4 жыл бұрын
@@patrykisdiving5574 I'll do a follow up video, when I get time. I will not run my battery down to the point where the quad drops out of the sky. I don't want to damage the battery, unless someone is willing to pay for it. P.S. The video quality is amazing at 2k 50fps.
@Gullallee1Wood4 жыл бұрын
Nice
@GarryPurcell4 жыл бұрын
Thanks
@Foxtrot25004 жыл бұрын
What size landing pad?
@GarryPurcell4 жыл бұрын
Its an 800mm landing pad. I have another video with the Jello and Horizon drift fixed. kzbin.info/www/bejne/sHzcgmOoo8iLasU
@marcinmichalak70014 жыл бұрын
What was the problem
@GarryPurcell4 жыл бұрын
Needed a few horizontal adjustments.
@danieltaormina14724 жыл бұрын
Looks like DJI stablity
@GarryPurcell4 жыл бұрын
The Fimi X8 Series, is definitely evolving into a good inexpensive quad.
@rhymond57954 жыл бұрын
Serious jelly effect ..might hardware problem.
@GarryPurcell4 жыл бұрын
I'm not certain at the moment, it was quite a cold morning 4 degrees Celsius. So I need to get some flights in a warmer temperature to compare them.
@rhymond57954 жыл бұрын
@@GarryPurcell in my experience jello effect is a hardware problem , not affected by any weather condition..
@GarryPurcell4 жыл бұрын
@@rhymond5795 Jello is often caused by badly balanced propellers. (I have 8 quads, and I use a Du-Bro balancer for the propellers) There is a gimbal setting on the fimi X8, which will reduce the sensitivity, I will also be turning on flight mode. (I forgot in the rush to get the quad flying, before too many people came to the park). I'll post a video showing the results, either good or bad.
@useryggfdcc4 жыл бұрын
NOT a serious jello problem at all.
@JAKOB19774 жыл бұрын
Its a 350 quad-... we also need to keep out headings and put the footage into perspective with value.
@tomaszpurta77714 жыл бұрын
Dont you think camera is worse than in 2018 ver?
@GarryPurcell4 жыл бұрын
I don't own a 2018 version, so I can't comment. This video was shot with default settings, apart from the gimbal calibration. My next video will be using 4K with maximum bitrate using a fast SD Card, and I'm going to look into removing the jello effect while I'm at it.
@shapethefuturetech60054 жыл бұрын
It’s a clear winner about video quality compared with 2018 model
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@tony27074 жыл бұрын
im waiting for delivery of the 2020, but seeing the results at 4k, it doesnt seem to hold up against its predecessor.
@GarryPurcell4 жыл бұрын
This was my initial flight using stock settings on a cold morning, 4 degrees with frost on the ground. I will be making another video with some changes to the settings, but not sure what the results will be.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@Cinetonegrowup4 жыл бұрын
Jello?
@GarryPurcell4 жыл бұрын
Not anymore. I'm currently stuck in Covid 19 stage 4 lock down. I'm allowed outside 1 hour per day for exercise. So I've been unable to post flight videos showing stability.
@coganrf26074 жыл бұрын
Vile music. Has anyone died?
@GarryPurcell4 жыл бұрын
It could be worse, just wait till my next video haha
@tony27074 жыл бұрын
Holy crap thats a lot of jello goin on.
@GarryPurcell4 жыл бұрын
As I have stated it is the initial flight using stock settings on a cold 4 degree day. BUT the jello problem is definitely there. I'll be changing a few settings, including balancing the propellers, and I'll make another video with the results, either good or bad results. Wish me luck.
@tony27074 жыл бұрын
@@GarryPurcell are you certain the cold is the reason for the jello effect? It would be a shame as the 2018 has some really nice video footage in snowy conditions. Im hoping its compatibility issues with the sd or software problems which can be rectified.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU
@Graham.Hanson4 жыл бұрын
Man what a disappointment. Seems all the problems of the 2018/19 are still present in this supposedly 'new model'. Considering you went to the trouble of adjusting and calibrating the gimbal, that horizon in the footage was way off, just like it always has been. As other commenters have stated. The jello and glitching is exactly the same. The only visible improvement from the 2018 model in this video is the precision landing. I certainly won't be buying this drone. FIMI appear to have made virtually no changes. They would have done better to simply sort out the software in the 2018 model and issue a proper firmware update, an update that actually works for a change. What they have done is repackaged the old crap as a 'new drone' and suckered a whole load of people into buying it.
@GarryPurcell4 жыл бұрын
Its looking that way at the moment. I'll be doing some changes to the settings, and balancing the propellers, then pop up a video showing the results, either good or bad.
@GarryPurcell4 жыл бұрын
I have now uploaded another video addressing the Horizon and Jello Problem 📌 kzbin.info/www/bejne/sHzcgmOoo8iLasU