Great info again Chris. Not sure if there are any new updates for my H501SS Advanced, but if there were I think I would be too frightened to attempt doing an update in-case I screwed anything up :o(
@josefdahari4 жыл бұрын
Superb video brotha. Thank you
@Droneaddiction4 жыл бұрын
Well spotted 👍🏻🕵🏻♂️
@MrSupermariocanada3 жыл бұрын
Good video!! I created a gimbal calibration rig to help do this without measurements!!
@QCGUY3 жыл бұрын
I believe I saw it on Facebook 👍🏻
@wingsfromheaven87884 жыл бұрын
So glad you made this video. I was thinking of doing one like it myself particularly to show the yaw correction method, exactly as you do using the eyeball method from above. You should also turn the drone 90 degrees and redo the process, because that's where things get crooked in flight. I usually do the gimbal calibration on the main feet, with the gimbal and front two legs hanging off the edge of the table. But I'm not sure if that's necessarily yielding better results in flight or not. A recent firmware (1055i) added some self-correction in flight, but i haven't had time to really put it to the test (I've been flying my M2P recently, after about two months of flying the X8SE exclusively on some road trips). The crooked gimbal issue is significant, so any help you can provide is welcome.
@QCGUY4 жыл бұрын
WingsFromHeaven 87 I’m getting good results from doing this and my horizon looks much better.
@wingsfromheaven87884 жыл бұрын
@@QCGUY Hey thanks for the update! But for clarification, which elements of the process are you doing? The ones in your video alone? Or are you referring to the additional 90 degree checks/adjustments? And perhaps also the gimbal calibration with front arm legs involved versus only the 4 body legs? Thanks for sharing your experience with the X8SE!!
@QCGUY4 жыл бұрын
WingsFromHeaven 87 I’m just referring to what I show or mention in videos like this. Anything additional I either had no results or might not even know about it but in the X8 I think I have tried and explored everything I could find or think of when doing things like this.
@kenweller20323 жыл бұрын
Big help. Same for 2020.
@dronlacek4 жыл бұрын
good job dude
@cabba254 жыл бұрын
thank you
@Donnykhuana774 жыл бұрын
Please show the same way how to do like this for parrot anafi??
@GorillamansGarage4 жыл бұрын
It seems to be s fickle flyer. I gave up on it. The procedure you show has been around a while but myself and Marcus have found that it still goes out of wack a little and sometimes after flying for a few minutes levels out. I have tried 5-6 times to get it right and on some flights its bang on and others it is way off and even others it can be seen to visibly change during flight. In the end... its not the end of the world. But they are aware of the issue along with the list of other glitches/// Have you had the multiple chinese writings pop up on your screen yet...? Its a great drone with tons of promise but it looks like I will be working on X8SE #3 soon... they want the one they sent me as a replacement back and give me another one. I went down this road with Parrot... not sure about a rematch. My big complaint to Fimi when this mode came out was that the black screen portion took up 1/2 the screen... I see its still not fixed. I see some new updates just came out (again)... keep them coming Fimi :)
@QCGUY4 жыл бұрын
Gorilla Man Like I said I might be late to the party. It’s working now and if I need to redo it each flight till it’s not a beta fix I’m good with that. It wasn’t as bad as it used to be anyhow. I love my X8 and have no complaints. You and Marcus have quite the time it seems. Sorry 😐
@jetmartin95014 жыл бұрын
@@QCGUY I think Marcus has had major issues with every drone that he's ever owned...and it's always the drone's fault. Hmmmm...makes you think? Is it the drone or the person?
@QCGUY4 жыл бұрын
Jet Martin We all make mistakes in our videos and with the details of the topic. Sometimes it’s the mistake of the things we are using but I guess I get lucky in not having some of the problems others have. I don’t race to update either which is a big lesson we learn the hard way.
@jetmartin95014 жыл бұрын
@@QCGUYYep I have no problem with people making mistakes as we all do.... but when the reviewer repeatedly makes obvious mistakes because they can't be bothered to RTF (and they even ack that in their videos) and then blame the drone for their mistakes AND then when commenters point out the cause of the problem and they respond with "No user error here"...and even mock the suggestions....I have a problem with that. IMO they should have their "reviewer" license revoked...SMH :-) Definitely not worth watching their reviews... I'm jussayin....
@QCGUY4 жыл бұрын
Jet Martin We’ll, I hope I have earned my license. I don’t review a lot but I try to do my best. You just let me know with a warning first before I get revoked 😂
@KuRnZ4 жыл бұрын
Hey Chris. Sorry to bombard your youtube. Would you happen to know if the Fimi X8 SE stops recording when you land? i.e. say you hand catch it and you want to continue the recording... I read somewhere it did, but Im not sure if this is still a thing with all the updates. Thank you in advance.
@QCGUY4 жыл бұрын
KuRnZ Thinking about it I can’t remember without trying it. 😂 I’m totally blank all of a sudden. I think it stops.....not 100% sure
@KuRnZ4 жыл бұрын
@@QCGUY dang. I really wanted to get that drone.
@QCGUY4 жыл бұрын
KuRnZ It’s when you power off so landing or hand catching won’t stop the recording just by stopping the motors. It’s powering off the quad. Sorry, I had to watch a few videos to answer that.
@cabba254 жыл бұрын
Good night I have a question about the updates i am buying a Fimi x8 do I have to do all the updates. are just the last one
@QCGUY4 жыл бұрын
Cabba Sound Productions You will be prompted to update and it will get you up to date automatically with what ever your quad needs.
@cabba254 жыл бұрын
@@QCGUY Thank you I've been watching your videos and they have helped me.
@dronesfordisabledrhylwilliams3 жыл бұрын
Hi from Rhyl North Wales 🏴 I have tried this but when I go to recalibrate the process only goes to 10% any suggestions would be much appreciated. Shaun
@QCGUY3 жыл бұрын
Shaun Williams avoids electronics, metallics especially with magnets like speakers but most common problem is people do keep it perfectly still when it self calibrates the gimbal.
@dronesfordisabledrhylwilliams3 жыл бұрын
@@QCGUY thank you so much for your reply. I have tried everything. Even open field but with no success. I'll just have to wait until fimi get back to me. It's a 2019 model and I have no other problem with her except the tilted horizon.
@DM10723 жыл бұрын
@@dronesfordisabledrhylwilliams hi mate in the advanced settings as explained make the gimbal p r y axis to see if it has full movement all the way to the left and right as it might just be sticking then calibrate it like in the video.
@Aluminata4 жыл бұрын
You did not actually say how you would physically straighten the camera, as your was only out " a hair". Just twist it with fingers and thumb?
@QCGUY4 жыл бұрын
It’s a adjustment in the app as I showed. Mine was of a hair in this situation but the same amount looking far off in the distance while flying amplifies that tremendously.
@manicmagic4 жыл бұрын
HEY MATE
@QCGUY4 жыл бұрын
manic magic Hey 👋
@mahtay20003 жыл бұрын
Now to just fix the atrocious Jello gimbal shake!!!!
@QCGUY3 жыл бұрын
They now remove one of the gimbal dampers on the 2020 models. Have you seen if that’s done well for people?
@mahtay20003 жыл бұрын
@@QCGUY I have the 2020 model. Sometimes the gimbal shakes so bad it sounds like it's gonna fall off in pre flight check! I have done your calibration, I have got access to the IMU 6 sided calibration so will let you know when i do it and get airborne
@jasonstern76464 жыл бұрын
This is nothing new but nice try! Why don’t you get out and fly something? We can figure out these things on our own.
@QCGUY4 жыл бұрын
Jason Stern Do you speak for the whole FIMI community? Thanks for your words of wisdom as usual.
@jetmartin95014 жыл бұрын
@@QCGUY Thanks for sharing this information..MANY people find these type of video's to be VERY helpful. Keep doing what you are doing...there will always be sad and pathetic haters out there. Just ignore them...as there lives must be miserable.