Final Assembly Begins on the BADDEST Low Rider ST! Born-Free Build Week 10.1 - Vlog 78

#thrashinsupply #harleydavidson #bornfreemotorcycleshow
Less than a week out from Born Free, it's crunch time! We trimmed the fat, changed the rider positioning, and increased the horsepower. Let the final assembly begin on The BADDEST Lowrider ST! Get ready because we have so much action this is going to be a two part vlog. Week 10.2 Vlog 79 is going dropping tomorrow at 4:00 pm PST.
Come and checkout our 2023 Harley-Davidson Low Rider ST at the Born-Free 14 Motorcycle Show.
For more checkout ThrashinSupply.com

[@errolparas]

I don’t think a lot of people realize how passionate Juan is about helping the company and Lance make good Harley parts. The dude commutes an hour and a half maybe more one way. He could’ve stayed at V&H and be super close to home. Good sh*t Juan, keep doing great things at Thrashin’z

[@yeotes423]

This was a huge factor in deciding what bars, risers and foot pegs I bought.

[@carlosxramirez]

Big facts, I hope Juan gets paid a super nice check for everything he does, and I hope if he doesn’t already that he gets shares or partial ownership because like you said, dudes super passionate about the company and extremely talented.

[@yeotes423]

@@carlosxramirez if Lance doesn't pay him, the Harley R&D division will after this build

[@brandonmacon3317]

Lmao lots of people drive that far to work. Welcome to reality

[@yeotes423]

@@brandonmacon3317 clearly didn't read the message

[@tannerjoss6859]

You guys are livin my dream! Harleys,tacos,beer and running a wicked business! Cheers boys

[@RideFreeApparel]

Bro this ST is sick!! All the way to its' bones.

[@THRASHIN]

Appreciate that!

[@hoss6048]

That bike is gonna be awesome!

[@bretthenson9447]

Lance you and Juan have definitely got the Right Recipe for Success , You've got us ALL Riveted to this Channel. Grateful that You two Fella's are Pushing the Envelope , let's Rephrase that .... !!!!. YOU Fella's are Pushing the Stratosphere For SURE .....!!!!!.

[@Fl2harley91]

Love when Juan just bust out with some smart talk, passion.

[@paulfrost5535]

These are goanna be 2 supper sick bikes guys

[@Thunder_and_Fury]

Lol It made me so happy when you said “Harbor Freight” 🤘🏼

[@garyehrhardt3136]

Looking good, going to be a show stopper

[@bobthomas3268]

Great show today. Tee Shirt idea, "See Ya Later"

[@Jerm-the_worm]

Pretty badass 😎

[@locoocho2415]

Lookin badass

[@lowriderstliving]

Fukn Stoked to see the builds at BF.

[@QuangNguyen1986]

my favourite on youtube. those guys are amazing, and living the dreams.

[@stephanebrochu6918]

taking shape ! can't wait to see the final result !

[@davepelfrey3958]

Taco Tuesday and bike building with the guys at Thrashin. Love your work. ❤

[@kikiperaza4707]

Trompo means top, so the pastor is set up on a vertical rotating spit, looks like a top, thus the trompo. Saludos. Keep riding guys.. great videos.

[@kevinmeehan4549]

Always looking forward to a new episode every week !!!!! Can’t wait til she’s done along with the other one .

[@rodneyhanbaum697]

Getting excited to see it completed,!

[@ozzierosado1985]

Love you guys! There’s no stopping THRASHIN!!!

[@WoodyRides]

It can’t be underestimated how huge the weight savings on the wheels and tires really are. That savings is so much more when they start spinning.

[@KG-theknickerbockerkid]

born free as free as the wind blows

[@johnw2693]

You guys have a good team! Lance and Juan have good video presence

[@daleclarkjr]

Dam y’all just keep crushing it. I can’t wait from week to week to see what y’all do next. I am so glad I stumbled across y’all’s channel. This is the type of content that needs to be on national tv to inspire the youngsters. Keep bring the heat 🔥🤙🏽

[@jamallee9619]

Dropping a video tomorrow too!!?? Mf clutch!! LETS GO!! 🎉🎉

[@PackersFlip]

You guys should make a white shirt with the new RED, WHITE & BLUE ST Build and sell them at BORN FREE

[@jonnymac8925]

I'm not gonna lie, I hit a bit of a stalemate lately with being work/life balance on one of my builds lately and this video just pumped me up enough to really want to get it done! What a sick bike!!

[@imbradandyouarenot]

That thing has a sick stance.

[@JDM777g3k]

Gonna be so sick when it’s done. Nice work T⚡️C

[@marcusturner5291]

Nice review keep up the good work Thrashin

[@ntdfmaverick]

It's going to be awesome. There's no doubt. Just have to execute now! The videos are the best!

[@AZDeemer]

hell yeah guys stunning bike!!

[@matthewgallivan7231]

hope to see you both at born free😤

[@RidingInSearchofEnlightenment]

New vlog today... and tommorow!!!! This is like Christmas dudes!!! Can't wait to see more!

[@rebel_ltz]

Yes!

[@paulhewson4600]

Cant wait to see the final cost of all the weight reduction!! Nice Job

[@johnmacias01]

Looking good guys! Looks like y’all wanna compete with Kruesi’s Bike builds! Let’s do it, biker build off‼️🤣

[@travisjacobs715]

Thank you for showing even you guys who are professional mechanics don’t have to much pride to check the instructions.

[@carlosxramirez]

Dropping another video tomorrow?! Yooooo!! 🥳

[@ChefBoyoP]

Can’t wait to see the bikes! Fuck I hope my bike is ready this week! 🤞🏻Been in the shop a month today

[@troykauffman3963]

Great build series guys. Fyi, Wipe tires off with brake cleaner to remove mold release compound and do same same to new rotors.

[@chuckdchuck]

I got a new set of Metzelers on my FXLRS and did the same thing leaving the shop that installed them!! Felt like someone ripped the rug right under my feet!! Luckily my crashbar saved the bike

[@robertaranda7371]

I'd like to see some more gold accents on the bike. Maybe the centers of the brake rotors.

[@CAT3616G]

I’m sorry you’re running into hiccups but I’m glad it gives us more content to watch. Love your guys stuff!

[@jessheredia725]

Juan started explaining rotational mass and I instantly felt stupid 😂

[@aramxaax]

🤘🏼🤘🏼🤘🏼

[@ihateemael]

Hi guys loving the series. might be a bit late . . re cheap torque wrench, you might like to do a few test torques comparing it to a known good one. I have seen not so cheap torque wrenches snap head bolts they were so far off. cheers.

[@kevinmcculloch7755]

Lance, you and Juan need to go some where for breakfast tacos. Let me know when where, I'll meet you and treat.

[@drock8172]

Tacos Los Cholos!! Go try it let us know 💪🏽

[@hizacaine]

Hey Juan, what is the difference in torque specification for titanium bolts vs steel bolts? There's a bunch of different bolts on that fancy light bike and none of those titanium bolts are going to stretch as much as those steelies that you are replacing, so how do you find the spec? Is there even a place where you can look that up?

[@thomaswolf3210]

There is a reference manual called the Machinery Handbook which is treasure trove of engineering info. Book is about one thousand pages of formulas and equations for engineers and machinist use.

[@keganadcock8253]

The bike looks amazing love the content! You guys inspired me to buy a 99 fxdc to learn to stunt on! Do you guys have any old pull back risers and mid bend bars hiding somewhere you would sell on the cheap? Let me know love all the content!

[@wpnevox451]

Lance is talking about a 24v set up lol that happen to me also

[@rw6663]

Where did you guys get the titanium bolts? Awesome detail!

[@vernegibb621]

😎

[@AlmadenJeff]

I didn't quite follow the work being done to increase the range of the swingarm. Was it because it was hitting pieces attached to the frame before the shock would hit the bump stop? Or, extending the margin of clearance to allow bump stop compression? Seems to me the maker of the swingarm needs another revision. I know you talked about it in a previous episode. I don't quite remember but I think it's a prototype, or close to RTM version you guys mentioned. Not sure I would trust the removable section on the swingarm for the chain or belt removal/install. Certainly not on an adventure bike. Definitely looks cool though.

[@josewhite2889]

Will you guys be there Saturday and Sunday ?? Or only Saturday

[@mugurock24]

🤙🏽 Need a 🌮 truck to pull up

[@act1984art]

They call it “trompo” because that is Spanish for “top”, not direction but as in the top kids play with, a spinning top. So they call it that because of the shape the meat is set in and also because it is spinning

[@dormantmenace]

I feel like your more likely to get freshly cooked el pastor than any other meat. Sometimes you get a carni burrito thats way bomb from somewere.. and the next time not so much.. same place. You can see the same dude back there. It was just freshly cooked first time. And probably sitting for a while next time.

[@steveo7767]

Those lithium batteries just don’t feel right after you have been handling the AGM’s! Crazy lite!

[@onelowsub]

Are you guys still making parts? Or is everything on hold until this bike is finished? I’m still waiting on my road glide top tree since April.

[@THRASHIN]

The team here is full steam ahead. From machines to warehouse movements. Feel free to call our customer support to get a idea where you American made Thrashin Top Tree is at… possible finishing production or actually in the assembly room 🔥👍🏻🇺🇸

[@CESMOBB]

U guys gonna be there both days?

[@angeleauxparker69]

should have put anti seize on that swingarm pivot shaft

[@davepelfrey3958]

Those polishing machines are serious. Had a friend many years ago worked at a chrome shop. He was polishing a piece of a car bumper, piece slipped out of his hand and slammed in his face, blinded him in one eye. Don't use one if ya don't know what the dangers are.

[@eddiesanchez5643]

Who is the mannequin in the back? Hahahah 😂

[@davidmatias6239]

Tacos, wheelies and tequila

[@michaelbeck5567]

Take that stock ecu and throw it in the trash! Get yourself a thundermax my dude!

[@evinnice3321]

Juan worries and complains a lot for someone who didn’t know what chasing threads was. Dude was over here trying to retap the hole 😂

[@marcot-mrk7178]

🤙🏼🤙🏼

[@kenkenyon444]

There's always that one guy who can't put tools away guess that's Juan's job?

[@Gotfaz]

Zoom on a Yamaha, chromed out eleven hundred

[@RobertPerez001]

Is the pipe that Juan is getting polluted for a bagger???? Are y’all finally making a long bagger pipe????😮😅

[@feloniousmonk3049]

You're gonna need BIG depleted uranium balls to keep that front end down. Are you lowering the bike? Did you replace the factory 13" shock with a 13" shock or a 12.5" one? I just put a 13" on my softail M8, and that shock looks shorter than 58mm travel, perhaps only 43mm. Probably lowers the bike a full inch in the rear.

[@MereCashmere]

Super dissapointed in the swing arm installation, seems like they should have been more clear with your guys about the usual troubles when installing.

[@yeotes423]

It was better when you guys forgot to make the upcoming videos private 😂

[@03roadking]

Just take stock weight.... And then ur new weight.... Save tons of time ,, than doin each piece . Time is money u don't have much time 😂😂😂

[@chevyon37s]

That’s what they’re going to do. But by weighing each item they’re showing us what kind of weight savings we can expect from each modification they’ve done.

[@j.e.p8117]

What's the name of the polisher? Yall needa plug in those local businesses with your channel not just tacos

[@glennstatham960]

You DO realise we are going to see the whole video?? So the dumb 'highlights' you put at the start of the vid we all just fast-forward past yeah?

[@phillipmckeownakalucifer.6689]

That swing arm needs to be available for us reg folks. Make that happen y'all's.

[@elieli209]

is it possible to put on a even wider back wheel on a low rider st?

[@adamhill2788]

I just got my Stealth gloves n used em in my pit bike mx race🤘🛵