Finally, a micro quadcopter with decent range. BetaFPV HX115 LR with built in ExpressLRS receiver!

[@JoshuaBardwell]

Are the 1102 motors on this one big enough or should they be 12xx or 13xx like Kabab uses? What about the FC -- do you trust BetaFPV on this one?

[@AvallonYo]

Definitely needs the 12XX-13XX motors for best performance at this weight, BetaFPV tends to underpower their quads, i wonder why

[@chrisg_fpv]

1204 at least would be nice. Seems like ELRS is taking over.

[@LS-xb2fh]

The 1102s are 52% of the size of 1302.75 motors. Absolutely too small. But for a little more cruisy flying which this quad seems to target, 1103 or 1202.5 would probably be fine. (@ 78% and 77% of the size of the fpvcycle motors respectively)

[@kurtzFPV]

Happymodel crux35 has an integrated elrs bnf also. It is 3-4s though, with 1404 motors and bottom mount battery.

[@thfpv4974]

I went through so many aio from betafpv !!! ??????🤷‍♂️💥🤦‍♂️💥🤦‍♂️💥#canttrust #imo

[@k1ortia]

The way Express Lrs has progressed is nothing short of amazing. Cant wait to get my module and try this Tech out

[@remainsmemories626]

You won't be disappointed!

[@kevdotfpv3342]

I'm waiting for my Namimno TX module right now :) Can't wait to get it.

[@k1ortia]

@@kevdotfpv3342 That's mad..same here. I went for the Namnimno because it has the best build quality. Yes it's got mega power, but I doubt I,ll ever use its full potential...👊🏾

[@KOrnhOliO1]

That's open source for you....just look at Android! ;)

[@kevdotfpv3342]

@@k1ortia Is yours on "Estimated to ship before September 25th" as well?

[@ehudv9276]

OMFG! I just played Liftoff, and I only just now realize that there's a map named after you and your yard. "Bardwell's yard" That's makes me happy and content. Thanks for sharing your rich knowledge with us. Lovelovelove

[@Trekeyus]

I thought that yard looked familiar.

[@WezleyVarty]

When you run a Li Ion on this, and fly it down to ~3.1V, the cam starts to brown out, and the ESCs also start to have issues. Rip out the FC + VTX, and put a HM ELRS AIO in, and you'd be ok. The cam angle is also limited by the frame carbon, and the cam heats up a LOT.... the frame is nice though lol

[@GoatZilla]

1s quads are just too dodgy considering so much of the logic wants 3.3v-ish. 2s is really the minimum viable configuration.

[@kevdotfpv3342]

I've noticed many small cameras heat up a lot... Especially the Caddx Ant Lite.

[@rakr9334]

Would a 5v step up Module Help?

[@eyeflytinkerings]

it might also be possible to remove the 12v voltage regulator, in order to get it working down to a lower voltage. Not sure this fc uses one though, as it's rated for 1s max? probably not.

[@Vousie]

@@GoatZilla I mean, why even is anyone flying quads on 1S other than tinywhoops? (tinywhoops work great on 1S - too small to carry more but not bigger) Especially 1S li-ion... All of the versions of the "it flies on a single 18650" idea that I've seen have just had too many issues to be worth it.

[@GregPless]

I replaced the motors with the RC in power 1202.5s and it woke up! This is literally my favorite quad for everyday anywhere flying, even over my naked digitooth. It is practically silent. Hummingbirds come chase it. The link is endless and the flight times are decent. It’s a great harmless way to practice finesse moves. Just set it on your car roof and get a quick couple packs in ANYWHERE!

[@trajanfpv]

It is good, I have flow Cybergap’s and it is way better.

[@jebrc]

What kv mine just wobbles bad

[@GregPless]

@@jebrc 11500kv really really works great. Use Nick Burn's tune. See his episode on the fix.

[@jebrc]

@@GregPless thank you much

[@ofiasdfnosdf]

Man that FC is big as a dinner plate! Okay I realized that was a picture a few seconds later!

[@XtianApi]

Lololol

[@SilverbackSasquatch19xx]

I have an hx 115 lr that got me into flying. I soldered in a gps to uart1. I still love it, so much I bought a second frame. With the second frame I am doing a set of 1202.5 11500 flywoo robo motors, another beta fpv flight controller, a speedy bee tx800, another caddx ant camera and hglrc gps. I plan to run 18650 and standard lipo packs like the 450 or the 650s.

[@williamcleven9991]

So glad you went over how to take the VTX out of "Race Mode". I watched this video right before I started setting up my Betafpv 3.5 Twig. That VTX was configured the same way. You saved me a ton of heartache figuring that out....

[@ChrisParayno]

I slapped a crazybee f4 board + 1203 on 3s. This frame just got a whole bunch more fun!

[@keithws79]

Oh my god! I never knew setting the video format would fix the heads-up preview in Betaflight Configurator. Thank you! I’ve been in the hobby since 2017. 🤦‍♂️

[@sleepy-if7iz]

Thanks!

[@johncarold]

Now this is cute. I just don't have ERLS yet. But I'm liking it so far. I just ordered the HX115 frame for I can build my own. I have been wanting a 2s or 3s version, but Mine will. Thanks again for the video and information about this HX115 with ELRS.

[@terminsane]

Imagine if FrSky developed its technology instead of trying to lock it down

[@archcyberstar8435]

I agree what u mean, But They are company work for money, not fame. its never happen. Same as Apple. they even made OSX from open source (FreeBSD licence) and locked it down.

[@terminsane]

@@archcyberstar8435 and now they're losing business because they won't do what the customer wants.

[@archcyberstar8435]

@@terminsane This is the difference between U.S and China. lol

[@terminsane]

@@archcyberstar8435 huh? No? Open-source and gnu projects are primarily from US and Europe. ExpressLRS and OpenTX are both primarily western softwares, which the Chinese companies are using to cut theur r&d costs to near nothing. If radiomaster didnt have OpenTX writen for them, nobody would own a radiomaster because radiomaster never would have existed. In China the government dictator just owns any business that becomes important or influential. They'll let you pretend you own it. And they'll let you keep some of the money. But you take orders from the dictatorship.

[@bengmo64]

I got an Express LRS tiny whoop FC and it is a game changer. It has an onboard vtx that does 200mw and I feel like I can roam so far now

[@p.i.engineer398]

for long range, use the happymodel aio 2.4 elrs board. it keeps the vtx running all the way down to 2.5v.

[@drunkskunk00]

Great review. This thing would have been better with 11,000 KV motors. Or as a 2-3s. I built mine from a bare frame as a 3S with 5500kv 1303 motors to haul a Shark Byte, and it's the most fun I've had in months. Its a great frame, at least.

[@ChrisParayno]

Similae, Very surprising and it was only $12 for the frame!!

[@jamesmichaelcabrera9613]

I've been flying mine on 2s 1002 14,000 Kv walksnail 1s VTX smooth

[@pablofpv_br]

Friend, I'm from Brazil and I really like your content, I learned a lot on your channel and I have a small channel about drones, congratulations, your channel is very good

[@atzod]

JB, if I may, try to solder second pigtale and run it on two batteries same time - 1S2P 450mah :-). Flies waaaaay better

[@Vousie]

Have you done that? I'd have thought the extra weight of a second battery would "cancel out" the amp advantage you get? If it does work, then that BT2.0 connector really is limiting it way more than it first appeared - which wouldn't be surprising since I doubt it's meant to handle ~30 amps. 😂

[@xiar5546]

@@Vousie it’s not the amp advantage. When you connect batteries in parallel the capacity is larger. Especially with 1s batteries. So 450mah times 2 is 900 mah now. So double the flight time and yes. Less voltage drop from splitting the current draw from 2 batteries.

[@MCsCreations]

Fantastic flying and review, Joshua!!! 😃 I really liked the quad! But I agree about the motors, so... I just added it's frame to my wishlist! 😂 Anyway, stay safe there with your family! 🖖😊

[@michalonex]

I've soldered second BT2.0 pigtail and fly 1s2p on it. And it's soooo much better, really recommend that you try it :D (also print in TPU similar battery holder but with place for two batteries). I'm also willing to put some small GPS on board just 4 fun ;)

[@pergunler9849]

Can you please share the stl-file for the 1s2p mount?

[@ikatsk7380]

that bugger in really wants tp go out :D

[@murphyking79]

Josh Bardwell teaching me again

[@athefpv4670]

You know happymodel had the ELRSF4 2G4 (5 in 1 aio) since may. It's the "ceramic" antenna version though but it's more than enough for micros. Betafpv is the first one to put it in a bnf though.

[@FireN2k9]

Yes, I'm with you regarding Express LRS being the future, but there are some good SPI. I just have my first tiny whoop for 2 weeks, I chose DSMX SPI. Range is very good with Jumper T-Lite. (At least 600m), could not fly any further because Analog VTX. Flywoo Firefly Baby Nano (1s) got Express LRS too btw. But I bought the ELRS T-Lite Module too :)

[@MrDeathFPV]

ExpressLRS taking over, good to see, I'm exclusively flying ELRS now

[@creationlabsinc.189]

How difficult is it to set up? I remember the first time I set up crossfire and had to go through tons of vids to get everything set up. Then again I’m not the most tech savvy.

[@MrDeathFPV]

@@creationlabsinc.189 very easy, the hardest part is figuring out how you want to configure the firmware options when you go to bake the firmware using the elrs configurator .. but once you have the firmware with pass phrase sorted and flash your gear, boom they're already bound

[@creationlabsinc.189]

@@MrDeathFPV thank you for your quick response.

[@MrDeathFPV]

@@creationlabsinc.189 all good mate, nothing much else to do while waiting for my packs to charge lol

[@creationlabsinc.189]

@@MrDeathFPV happy flying then brother! Lucky… lol

[@csmarkham]

Every time you say “link down below” to _yet_another_ helpful video, I know that becoming a Patreon was a great choice. Thank you. Learned so much today.

[@JoshuaBardwell]

Thank you for the support

[@MariomasterNSMBHD]

There also is an Happymodel AIO flight controller with ELRS for 1s. Only has 5A ESCs though so you aren't gonna use it for stuff other than whoops. I think Happymodel also has a Mobula6 with ELRS now but they for some reason put crappy motors on it.

[@ВадимОсоченко]

whats wrong with motors?

[@luisrrr3290]

Joshua, what a good and reliable remote control for drones and to practice on a PC simulator that you can recommend that is compatible with the new technology that has come out on the market but that the remote control does not exceed more or less $180. I want to start flying a drone it seems fun although somewhat difficult. I will appreciate your answer.

[@JoshuaBardwell]

Radiomaster tx16s is a good choice.

[@luisrrr3290]

@@JoshuaBardwell That one is easy to connect to PC simulator?

[@Freebird_67]

I have a feeling Trappy isn't to happy about all the EpressLrs.

[@gravit8ed]

*head to keyboard* I bought one of these months ago and couldn't get the ELRS to take a basic flash, went through everything...got another one and then fought the crappy video quality for weeks. I bought better attenas for my goggles and just about threw them both out and then thought I'd watch your video one more time and there it is, that stupid PIT video problem almost caused me to walk away from this thing. For the record, it did not disable upon arming, but the OSD changes made the difference. I'll just use the bricked one for parts I guess.

[@CgitEinsteins]

drone ini fc nya ga jelas, pake bl heli S seri Z, wtf. kaga bisa di update ke bidirectional rpm filter.

[@FerralVideo]

I specifically came here looking for the rippage configuration of this quad. I've got my radar open for Happymodel's Crux 3 LR for my nano size real long range, since the FC is able to handle the ultra-low drop-out voltage of an 18650. Also half considering an "upgrade" to 26650, but I don't know if the tiny thing can handle the added weight, even with the bump to current handling.

[@bil230660]

That markup is way cool man!!! Haha. I'm gonna start using ELRS, open source software 👍👍

[@k1ortia]

Have you looked at the Crux35? well worth a look. Comes with elrs installed and 5min+ flight times

[@fdev31]

I ordered one some time ago but it hasn't been shipped yet...

[@k1ortia]

@@fdev31 iv ordered 2, if it takes to long i,ll get a refund.

[@kurtzFPV]

@@fdev31 ordered the hd version through makerfire about a week ago and tracking shows it is in Georgia and im in Florida, so hopefully the next coupla days. I love the crux3, and I'm hoping the 35 will be a dji version I can finally fly in the yard without scaring the neighbors

[@k1ortia]

@@fdev31 Same here, still waiting 😴

[@fdev31]

@@kurtzFPV The one I found & ordered is have a caddx Ant Camera: Analog version Ant+OVX303 VTX - I did double check since I don't have any DJI equipment ! I'm naively waiting that OpenHD becomes as mature & famous as ExpressLRS or that HDZero starts to be implemented by many manufacturers :)

[@scu-dub]

OMG THANK YOU !!!!! I am looking into getting a whoop and I want LRS on it but had no clue how to go about flashing the mod or receiver!!!!😁 I was waiting for this vid J B🤌👍✌

[@Faith_Family_Firearms_Freedom]

I feel like XF really missed a great opportunity. XLRS seems to be emerging as the top LR protocol.

[@LuKas-dd4xh]

The only thing I clould think of the whole video is that Liftoff needs to update the JBs House map 😂 great video anyways 😍

[@ScowlerJase]

I had a happymodel with a built in ELRS RX before this one. I also have this quad and its a lemon. There’s no point having ELRS in it if it flies for 2 mins only. It’s killed 5 of my lipos , the firmware on the ESCS is garbage. The motors are too small for the props. Even putting FPVCycle motors on it didn’t solve the flight time for me. I stripped it for parts after the 20th flight. I f you want more fun than this quad , get a Happymodel FC with ELRS built in , stick it in an UZ80 frame with 0802 motors and 40mm props and enjoy 8-10 min flight times.

[@ooHotcooleRoo]

Also there's Crux35 that has 12a ESC built in ELRS 20x20 AIO on it. Happymodel ELRS X1 AIO. And I have an 1s toothpick with their other ELRS AIO that has VTX built in and it's quite awesome (52g AUW 3inch. 7 min slow flight, 3-4 min freestyle Will test with bigger batts when they arrive, currently 450mah HV). Also currently no issues with any of HL hardware reliability wise.

[@SamSpiri]

The pen is so satisfying ))

[@chrismillersrcfamily]

@24:05 what’s for dinner? If it was Dji I wouldn’t need to ask.

[@a-damthemansixtynan4463]

“Wait, I just charged these batteries, what’s going on here?!” You sounded like Norm McDonald when you said that.😂RIP.

[@febbyeka]

Hi JB, I bought one of this FC. ESC firmware is Z_H_30_REV16_7.HEX. I can’t find these version on the blheli configurator, or in the JazzMaverick. So I think this FC doesn’t support RPM Filtering at all, at this moment

[@JoshuaBardwell]

Bummer 😑

[@rolisaenz]

i tried to flash it wityh JESC and it says the ESC's are locked, that you need to use some strange port or protocol to flash it :(

[@febbyeka]

Does JESC has the same ESC version?

[@TheMightyPooh420]

you need to put the bigger motor on it no doubt it would be an all around improvement

[@sekiart_fpv7954]

who gonna tell him

[@havoc_64]

another great vid! thanks Josh!

[@ndtran9913]

18650 Battery Bay is not included in the package. Why didn't FPV do that ? Can it be modified to use 18650 ?

[@RaynerGS]

What do you think about this baby with HDZero Whoop? To me, it looks like a perfect marriage. Good job and salute from Brazil!

[@tk-maker]

I got a weird idea, how about we replace tinyhawk2 freestyle motors and props into this ? The new xh115 lr FC now support 1-2s. Will it fly like TH2F?

[@sethpark777]

How do you feel this compares to the flywoo firefly 1s performance-wise?

[@urlawyer]

Any recommendations for the smallest quad that can get out 3km+ and maybe do some mountain surfing? Would need to have a GPS. Would be interested in both quads that can and can’t carry a GoPro. Note that I do not have DJI; I’m analog only. Obviously I could build one, but I’m interested in PNPs and BNFs.

[@JoshuaBardwell]

For mountain surfing and longer range, I recommend looking at a 7" The iFlight Chimear 7 might be worht a look. Bear in mind Betaflight GPS Rescue is really not to be trusted. If you really want a quad you can trust to come home you need iNav or Ardupilot (or DJI LOL).

[@urlawyer]

Joshua Bardwell Thanks, Joshua. Yes, I’ve built a few LR 7” quads, and I use Arducopter on one of them. My primary goal of thinking about smaller quads is building the smallest “travel pack” that I can that will still enable me to do some long-range exploring. Batteries, props, etc. scale with quad size, so I am trying to go minimalist. The additional factor of quietness/stealthiness would also be beneficial. In any event, thanks for all you do. I buy through your affiliate links whenever I can to support your work.

[@MatthewRumble]

Can you attach a TBS crossfire reciever to it?

[@ehudv9276]

Thank you for the info! great vid

[@paulm1606]

Gread vid as usual just wondering were the link was to the run down vid on the several best expressrls modules available jb ? (Found the vid) no worries shame it does not have my new happymodel elrs pro slim xlite/pro module lol

[@hazonku]

Looks like it flies just like my Tinyhawk but trading all the fun oomf for range. Honestly this seems like the aim is to ACTUALLY be the great quad for beginners that everyone said the TinyHawk was when it really isn't. I agree this quad misses the mark but it is a step in the right direction.

[@kmarlow1]

I like the bt2.0 connector however, the betafpv 1s batteries are not the best, that's for sure. I've been thinking about just swapping connectors on some batteries!

[@causiang9537]

Bi-Directional cannot work on this FC, the HEX file ZH_30 does not exist in the JESC Firmware, and if flash using BluJay also the motor cannot Spin

[@deltageek7177]

works with bluejay

[@causiang9537]

@@deltageek7177 how ?

[@rolisaenz]

@@deltageek7177 howw ???

[@0nec00ler]

Joshua, how to make myself to sit down, disassemble all my 4 quads and flash r9 receivers with ELRS? :) Please advise :)

[@reynolds81]

Last few beta fpv quads I've had have only had 1 flight before they burnt up, least I could fly further on my one flight now 🤣

[@MrQuijibo]

My experience too. I bought a BetaFPV 85x HD. Reassuringly expensive right? It's on its 3rd FC, 2nd ESC board and 2nd VTx. Current working fine but that's because it's up for sale and I'm not flying it no more

[@reynolds81]

@@MrQuijibo yea I also had the 85x with the naked vista, had 2 new motors and a new flight controller before I gave it up and moved on. Even with this release here they are just jumping on the latest hype and rushing products out, I know alot of pilots who are not remotely interested in elrs so I feel they are already limiting there market

[@krangelbarn]

Hi Joshua, how would you say that this one stacks up against the Eachine Nano LR3 that also has ELRS? Thanks for all the videos you make

[@JoshuaBardwell]

Very different beasts. This one flies way better because it's lighter, but it doesn't fly as long.

[@EJPaz]

How do you charge xt30 1s batteries?

[@JoshuaBardwell]

I would probably use an XT30 to XT60 adapter and then a regular charger.

[@Igor-eo1kd]

What about rumors that they stopped a production because of customers clames.

[@SkyCandyVisuals]

I like your voice better on the workbench microphone. can you tell me the microphone brand and model when you have time? thanks for all your hard work on these types of videos. it'd be nice to get my hands on a aio board like this and make my own "long range" or freestyle drone with changing up the motors and using the xt30 1s batteries. can it take 2s? headed to your link to find out... no it cannot. I've had aio board from beta come brand new in the box with capacitors sideways and touching other components. only happened to me once but it did happen

[@JoshuaBardwell]

Rode video micro.

[@SkyCandyVisuals]

Thx @@JoshuaBardwell

[@mikeevans6926]

This is designed to compete with the rekon 3, the crux lr, and the darwinfpv lion knock off. It was put out to capture some of the sales of the new trend the 1s micro long range trend that is going on currently.

[@Editer38738]

Hey josh I love your channel .. Your a badass pilot btw . Will this drone bind with the beta radio lite se

[@pj_pfrommer5492]

Heyy do you think the frame would hold some 1404 motors with 4s battery witch 3" props?

[@Lordprimate]

no comments about the bugger

[@BboyFenzi]

Why is a Mobula7(notHD) running not that long with the exact same battery?

[@davidmgillmer]

Bluetack for your metal shavings in motor! @Joshua Bardwell ;)

[@chad61610]

I updated TX to Xlrs 2.0 but not able to update AIO on HX115? Lil help?

[@danieledm0101]

You should compare this with happymodel crux 35

[@richardheedfpv9626]

Nice review but I've seen more life in a tramps vest. Failure rate should be tiny as betafpv prices are crazy high.

[@wearemany73]

I feel it’s just a matter of time before the Oxford dictionary adds “fling-flang” to the collective lexicon. 🤓❤️

[@paulm1606]

Flippy flappy i use lol

[@BarsMonster]

I wonder why larger motors are even considered. On max throttle it sags fresh battery to

[@jebrc]

I cant get mine to stop jittering its super bobbley any thoughts how to get it to fly smoother?

[@1080p3dhd]

same here, yaw twitching bad

[@jebrc]

@@1080p3dhd yea super bad i have some 65mm props coming todat to try that out. If flies better on the stck betaflight tune then the tune it comes with worse 130 i ever spent

[@1080p3dhd]

I found out that it's more of a hardware thing for mine, One thing I did that might work for you was I literally put pressure on the board with my finger while it was powered on right around the center I had to push it down where the board would physically bend a little bit and then this made it flight stable until the next battery pack that's how I found out it was probably something hardware related not in beta flight

[@jebrc]

@@1080p3dhd is your the one with the usb c or the usb c adaptor?

[@1080p3dhd]

It's the one with the adapter, no USB c on board, v2.0

[@richfpv472]

I always pmsl at that ending 🤣

[@R.B_B]

Nood question what is "Pit mod" and the pros and cons?

[@JoshuaBardwell]

Pit mode puts the vTX at extremely low output power so you can test that it works but not interfere with anybody else flying nearby.

[@ae-qy4jf]

@@JoshuaBardwell I did as you showed on the video, saved it, and when I changed the battery, I need to go into the settings again and change how it will set up once and not go into the settings anymore?

[@HotboiEngineering]

Really needs some 12xx size motors. Feels woefully underpowered.

[@rob3393]

What is happening with Orca FPV goggles? Is there a V2 and if so when is it coming out?

[@Hugo27-h9k]

where is this in stock in 2024?

[@FastSloW-qt8xf]

I bought the crux3nlr over this and I'm sorts regretting it. The crux flies great however the vtx is terrible and my gps only works off usb power. I tried other modules, checked my wiring, checked my configuration, and the thing won't pick up satellites . Literally sat out in the yard for 30 mins

[@sleepy-if7iz]

amazon got the 128650 battery tray

[@marc_frank]

1:50 yeah tbs messed up that one

[@offstyler]

He will never let them outlive the Literadio story, lmao.

[@jarredgallaher2643]

js , The Segmenting is wrong, title of the battery section says PH 2.0

[@JoshuaBardwell]

I'm not sure what you're saying. Can you give more details.

[@bear_bull]

nice review

[@v4ng3n]

Thought LQ showed as 2, 1 or 0(:100). What’s with the 6:100?

[@karoo_bushman6880]

500Hz

[@v4ng3n]

Oh, yes off course. I didn't think about that the numbering changed with the packet rates, which it off course does. I just read on the ELRS webpage that "7:100 means mode 7 = 500Hz and 100% LQI." So apparently 7 is 500 Hz. Do you know what all the packet rates are? I can see they go from 25 to 500 Hz (with future plans for a 1000 Hz option), so I'm assuming there's 7 for now (and maybe 8 in a near future).

[@TheLshallo]

@@v4ng3n i think it's like this: 25Hz (900MHz only??) 50Hz 100Hz (900MHz only) 150Hz (2.4GHz only??) 200Hz (900MHz only) 250Hz (2.4GHz only) 500Hz (2.4GHz only) But don't quote me on that :D

[@v4ng3n]

​@@TheLshallo Thanks for that! :D JB ran through this exact question in his last video, and he also had some rates he couldn't choose. If he was using a 2.4 GHz receiver, your order fits perfectly. Except he couldn't choose 500 Hz. Is that option maybe 900 MHz only, or did he just have some problems with his receiver?

[@TheLshallo]

@@v4ng3n No 500 is def 2.4 only. 900 stops at 200hz. I think he could have chosen it but his radio does not support such a high sampling rate with his current firmware. Or maybe it's still the crsf protocol from radio to module that is the limitation. I also run 250 because i find it to be enough so I've not looked too much into it.

[@astromancer]

No. When we're talking about long range protocols, we're definitely not thinking TBS Tracer.

[@OsakuMasatoshi]

0:52 wtf? map from liftoff??

[@ReeseFPV]

My vtx lasted 5 batteries

[@MrQuijibo]

I bought a BetaFPV 85x HD. Reassuringly expensive right? It's on its 3rd FC, 2nd ESC board and 2nd VTx. Current working fine but that's because it's up for sale and I'm not flying it no more. I certainly wouldn't trust it on a long range flight.

[@itsawildrk2360]

I think the frame is great 👍 and toothpicks are the way to go... it kinda forces u to learn pid tuning to get great performance aswell, of that's a draw back to you... mahn... ur wasting ur components capabilities. Toothpicks and endurance quads have a decent amount in common so idk... I'm working on a 5/6in toothpick with mad power to weight ratio 💪 frame deign and everything for endurance freestyle in open farms or things...

[@bedrascal]

Mobula 6 comes BNF with ELRS - I still don't trust BetaFPV. Emax Nanohawk X uses 1s with XT30 and include adapters for charging and using batteries with PH2.0

[@licensetodrive9930]

BetaFPV & ExpressLRS.... Sometime soon I'll be finishing the folding TPU holder for their 2.4G ELRS RX they sent me.

[@maxmeister6355]

Expresslrs is the future 🤘🤘

[@derboehsevincent3791]

Could you show your freestyle rates?

[@digitalpituitary5226]

I like the video 😎

[@ChunkyPuppet]

for real....first 6 minutes of the video you have snot hanging out. just trying to help

[@kevdotfpv3342]

I'm amazed at how lazy the people at BetaFPV have to be to upload the CLI dumps as *BTFL_clr_HX115LR_CSRF_Analog.txt* and *BTFL_clr_HX115LR_CSRF_Analog(1).txt*

[@YorkyPoo_UAV]

Just give me a FC with xfire... I don't want to spawn everything to ERLS.

[@archcyberstar8435]

3 inch prop coptor must be 2S or 3s. Maybe BetaFPV wanted to make it convertible to 18650 Battery but they actually didnt make it(no include case) Sorry this is crap.